: Note - this file is executable.
: You can run it by saving the raw markdown to disk, then chmod +x README.md, then ./README.md
: It will execute all of the code blocks that finish with the :<<'```executable' tag.
: This script will install all dependencies, clone the Ginan repo into the current directory and build the Ginan toolkit.
Ginan is a processing package being developed to processes GNSS observations for geodetic applications.
We currently support the processing of:
- the United States' Global Positioning System (GPS);
- the European Union's Galileo system (Galileo);
- the Russian GLONASS system (GLONASS)*;
- the Chinese Navigation Satellite System (BeiDou)*;
- the Japanese QZSS develop system (QZSS)*.
We are actively developing Ginan to have the following capabilities and features:
- Precise Orbit & Clock determination of GNSS satellites (GNSS POD);
- Precise Point Positioning (PPP) of GNSS stations in network and individual mode;
- Real-Time corrections for PPP users;
- Analyse full, single and multi-frequency, multi-GNSS data;
- Delivering atmospheric products such as ionosphere and troposphere models;
- Servicing a wide range of users and receiver types;
- Delivering outputs usable and accessible by non-experts;
- Providing both a real-time and off-line processing capability;
- Delivering both position and integrity information;
- Routinely produce IGS final, rapid, ultra-rapid and real-time (RT) products;
- Model Ocean Tide Loading (OTL) displacements.
The software consists of three main components:
- Network Parameter Estimation Algorithm (PEA)
- Precise Orbit Determination (POD), and
- Various scripts for combination and analysis of solutions
Ginan is supported on the following platforms
- Linux: tested on Ubuntu 18.04 and 20.04
- MacOS: tested on 10.15 (x86)
- Windows: via docker or WSL on Windows 10 and above
You can quickly download a ready-to-run Ginan environment using docker by running:
docker run -it -v /data:/data gnssanalysis/ginan:v1.5.2 bash
This command connects the /data directory on the host (your pc), with the /data directory in the container, to allow file access between the two systems, and opens a command line (bash) for executing commands.
You will need to have docker installed to use this method.
To verify you have the Ginan executables available once at the Ginan command line, run:
pea --help
pod --help
If instead you wish to build Ginan from source, there are several software dependencies:
- C/C++ and Fortran compiler. We use and recommend gcc, g++, and gfortran
- BLAS and LAPACK linear algebra libraries. We use and recommend OpenBlas as this contains both libraries required
- CMAKE > 3.0
- YAML > 0.6
- Boost >= 1.73 (tested on 1.73)
- Mongo_cxx >= 3.6.0 (and Mongo_C >= 1.17.1)
- Eigen3 > 3.4 (we have used 3.4.0)
- netCDF4
- Python3 (tested on Python 3.7)
Update the base operating system and install base utilities gcc, gfortran, git, openssl, openblas etc:
dir=$PWD
sudo apt update
sudo apt upgrade -y
sudo apt install -y git gobjc gobjc++ gfortran libopenblas-dev openssl curl net-tools openssh-server cmake make libssl1.0-dev wget sudo python3 software-properties-common
pip3 install wheel pandas boto3 unlzw tdqm scipy
:<<'```executable'
Ginan requires at least version 9 of both gcc and g++, so make sure to update the gcc/g++ alternatives prior to compilation:
sudo add-apt-repository ppa:ubuntu-toolchain-r/test -y
sudo apt update
sudo apt install -y gcc-9 g++-9
sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-9 51
sudo update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-9 51
:<<'```executable'
Depending on the user's installation choice: install PEA-only, POD-only or all software packages, a set of additional dependencies that need to be built may change. Below, we explain building all the additional dependencies:
Note that many make commands here have the option -j 2 applied, this will enable parallel compilation and may speed up installation time. The number of threads can be increased by changing the number, such as -j 8, but be aware that each new thread may require up to 2GB of memory.
First, create a temporary directory structure to make the dependencies in, it can be removed after the installation process is done:
mkdir $dir/tmp
:<<'```executable'
We are using the yaml-cpp library to parse the configuration files used to run many of the programs found in this library. Here is an example of how to install the yaml library from source:
cd $dir/tmp
git clone https://github.com/jbeder/yaml-cpp.git
cd yaml-cpp
mkdir cmake-build
cd cmake-build
cmake .. -DCMAKE\_INSTALL\_PREFIX=/usr/local/ -DYAML\_CPP\_BUILD\_TESTS=OFF
sudo make install yaml-cpp -j2
cd $dir/tmp
rm -rf yaml-cpp
:<<'```executable'
PEA relies on a number of the utilities provided by boost, such as their time and logging libraries.
cd $dir/tmp
wget -c https://boostorg.jfrog.io/artifactory/main/release/1.73.0/source/boost_1_73_0.tar.gz
tar -xf boost_1_73_0.tar.gz
cd boost_1_73_0/
./bootstrap.sh
sudo ./b2 -j2 install
cd $dir/tmp
sudo rm -rf boost_1_73_0 boost_1_73_0.tar.gz
:<<'```executable'
Eigen3 is used for performing matrix calculations in PEA, and has a very nice API.
cd $dir/tmp
git clone https://gitlab.com/libeigen/eigen.git
cd eigen
git checkout 3.4.0
mkdir cmake-build
cd cmake-build
cmake ..
sudo make -j2 install
cd $dir/tmp
rm -rf eigen
:<<'```executable'
Needed for json formatting and other self-descriptive markup.
cd $dir/tmp
wget https://github.com/mongodb/mongo-c-driver/releases/download/1.17.1/mongo-c-driver-1.17.1.tar.gz
tar -xf mongo-c-driver-1.17.1.tar.gz
cd mongo-c-driver-1.17.1/
mkdir cmake-build
cd cmake-build/
cmake -DENABLE_AUTOMATIC_INIT_AND_CLEANUP=OFF -DENABLE_EXAMPLES=OFF ../
cmake --build . -- -j 2
sudo cmake --build . --target install -- -j 2
cd $dir/tmp
curl -OL https://github.com/mongodb/mongo-cxx-driver/releases/download/r3.6.0/mongo-cxx-driver-r3.6.0.tar.gz
tar -xf mongo-cxx-driver-r3.6.0.tar.gz
cd mongo-cxx-driver-r3.6.0/build
cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/usr/local -DENABLE_EXAMPLES=OFF ../
sudo cmake --build . --target EP_mnmlstc_core -- -j 2
cmake --build . -- -j 2
sudo cmake --build . --target install
cd $dir/tmp
sudo rm -rf mongo-c-driver-1.17.1 mongo-c-driver-1.17.1.tar.gz mongo-cxx-driver-r3.6.0 mongo-cxx-driver-r3.6.0.tar.gz
:<<'```executable'
Using the mongo database is optional, but is needed for use of the realtime plotting and statistics available through the GinanEDA
Prepare access to repositories and download and install mongo:
cd $dir/tmp
wget -qO - https://www.mongodb.org/static/pgp/server-4.4.asc | sudo apt-key add -
echo "deb [ arch=amd64,arm64 ] https://repo.mongodb.org/apt/ubuntu focal/mongodb-org/4.4 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-4.4.list
echo "deb [ arch=amd64,arm64 ] https://repo.mongodb.org/apt/ubuntu bionic/mongodb-org/4.4 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-4.4.list
sudo apt update
sudo apt install -y mongodb-org
To start MongoDB service:
sudo systemctl start mongod
sudo systemctl status mongod
mongod
To autostart MongoDB on system startup:
sudo systemctl enable mongod.service
sudo apt -y install libnetcdf-dev libnetcdf-c++4-dev
:<<'```executable'
You can download Ginan source from github using git clone:
cd $dir
git clone https://github.com/GeoscienceAustralia/ginan.git
cd ginan
:<<'```executable'
Then download all of the example data using the python script provided:
python3 scripts/download_examples.py
:<<'```executable'
Upon installation, thie ginan directory should have the following structure:
ginan/
├── README.md ! General README information
├── LICENSE.md ! Software License information
├── ChangeLOG.md ! Release Chnage history
├── aws/ ! Amazon Web Services config
├── bin/ ! Binary executables directory*
├── Docs/ ! Documentation directory
├── examples/ ! Ginan examples directory
│ ├── data/ ! example dataset (rinex files)**
│ ├── products/ ! example products and aux files**
│ ├── solutions/ ! example solutions for QC**
│ --------------PEA examples--------------
│ ├── ex11 ! PEA example 1
│ ├── ex12 ! PEA example 2
│ ├── ex13 ! PEA example 3
│ ├── ex14 ! PEA example 4
│ ├── ex15 ! PEA example 5
│ ├── ex17 ! PEA example 7
│ ├── ex18 ! PEA example 8
│ --------------POD examples--------------
│ ├── ex21 ! POD example 1
│ ├── ex22 ! POD example 2 full GNSS pod fit example (5 constellations)
│ ├── ex22/gps ! POD example 2 US GPS constellation only
│ ├── ex22/glo ! POD example 2 Russian GLONASS constellation only
│ ├── ex22/gal ! POD example 2 European GALILEO constellation only
│ ├── ex22/bds ! POD example 2 Chinese BEIDOU constellation only
│ ├── ex22/qzss ! POD example 2 Japanese QZSS constellation only
│ ├── ex23 ! POD example 3
│ ├── ex24 ! POD example 4
│ ├── ex25 ! POD example 5
│ └── ex26 ! POD example 6
│ --------------long test examples--------------
│ ├── ex31/pod_fit ! POD fit (ex31 stage 1)
│ ├── ex31/pea ! PEA re-estimate parameters
│ ├── ex31/pod_ic ! POD ic integrate
│
├── lib/ ! Compiled objectlibrary directory*
├── scripts/ ! Auxillary Python and Shell scripts and libraries
└── src/ ! Source code directory
├── cpp/ ! PEA source code
├── fortran/ ! POD source code
├── cmake/
├── doc_templates/
├── build/ ! Cmake build directory*
└── CMakeLists.txt
*created during installation process
**created by download_examples.py script
Prepare a directory to build in - it's better practice to keep this separated from the source code. From the Ginan git root directory:
mkdir -p src/build
cd src/build
:<<'```executable'
Run cmake to find the build dependencies and create the make file.
By default you will compile an optimised version, typically this version will run 3 times faster but if you run into compile problems depending on your system, add the -DOPTIMISATION=FALSE flag:
cmake ../
:<<'```executable'
To build every package simply run make or make -jX , where X is a number of parallel threads you want to use for the compilation:
make -j2
:<<'```executable'
Alternatively, to build only a specific package (e.g. PEA or POD), run as below:
make pea -j2
make pod -j2
This should create executables in the bin directory of Ginan.
Check to see if you can execute the PEA from the examples directory
cd ../../examples
../bin/pea --help
:<<'```executable'
and you should see something similar to:
PEA starting... (doxyjen release-1.4.1-beta-436-g26247195 from Thu Jul 21 12:24:55 2022)
Options:
-h [ --help ] Help
-q [ --quiet ] Less output
-v [ --verbose ] More output
-V [ --very-verbose ] Much more output
.
.
.
--input_persistance Begin with previously stored filter and
navigation states
--output_persistance Store filter and navigation states for
restarting
PEA finished
Similarly, check the POD:
../bin/pod --help
:<<'```executable'
This returns:
Earth Radiation Model (ERM): 1
Default master POD config file = POD.in (old - no longer supported) - use a yaml config
yaml config file options by default can be overridden on the command line
Command line: ../bin/pod -m -s -o -a -p -r -t -n -i -u -q -k -w -y -h
Where:
-m --podmode = POD Mode:
1 - Orbit Determination (pseudo-observations; orbit fitting)
2 - Orbit Determination and Prediction
3 - Orbit Integration (Equation of Motion only)
4 - Orbit Integration and Partials (Equation of Motion and Variational Equations)
5 - Single satellite integration from pod_data section of yaml
-s --pobs = Pseudo observations orbit .sp3 file name (must be ITRF)
-o --cobs = Comparison orbit .sp3 file name
-a --arclen = Orbit Estimation Arc length (hours)
-p --predlen = Orbit Prediction Arc length (hours)
-r --eopf = Earth Orientation Paramaeter (EOP) values file
-t --eopsol = Earth Orientation Paramaeter file type: (1,2,3)
1 - IERS C04 EOP
2 - IERS RS/PC Daily EOP
3 - IGS RP + IERS RS/PC Daily (dX,dY)
-n --nutpre = IAU Precession / Nutation model
2000 - IAU2000A
2006 - IAU2006/2000A
-i --estiter = Orbit Estimatimation Iterations (1 or greater)
-u --sp3vel = Output .sp3 file with velocities
0 - Do not write Velocity vector to sp3 orbit
1 - Write Velocity vector to sp3 orbit
-q --icmode = Initial condition from parameter estimation procedure
-k --srpmodel= 1: ECOM1, 2:ECOM2, 12:ECOM12, 3:SBOX
-w --empmodel= 1: activated, 0: no estimation
-d --verbosity = output verbosity level [Default: 0]
-y --config = yaml config file
-h --help. = Print program help
Examples:
../bin/pod -m 1 -q 1 -k 1 -w 0 -s igs16403.sp3 -o igs16403.sp3 -y ex21.yaml
../bin/pod -m 2 -q 1 -k 1 -w 0 -s igs16403.sp3 -p 12 -y exi22.yaml
For orbit updates using Parameter Estimation Algorithm (PEA):
../bin/pod -m 4 -q 2 -k 1 -w 0 -s igs16403.sp3 -o igs16403.sp3 -y ex23.yaml
Ginan documentation consists of two parts: these documents, and separate doxygen-generated documentation that shows the actual code infrastructure. It can be found here, or generated manually as below.
The Doxygen documentation for Ginan requires doxygen and graphviz. If not already installed, type as follows:
sudo apt -y install doxygen graphviz
:<<'```executable'
On success, proceed to the build directory and call make with docs target:
cd ../src/build
cmake ../
make docs
:<<'```executable'
The documentation can then be found at Docs/codeDocs/index.html.
Note that documentation is also generated automatically if make is called without arguments and doxygen and graphviz dependencies are satisfied.
Congratulations! You are now ready to trial the examples of PEA and POD from the examples directory. See Ginan's manual for detailed explanation of each example. Note that examples have relative paths to files in them and rely on the presence of products, data and solutions directories inside the examples directory. Make sure you've run download_examples.py from the Download step of this instruction.
The paths are relative to the examples directory and hence all the examples must be run from the examples directory.
NB Examples may be configured to use mongoDB. If you have not installed it, please set enable_mongo to false in the pea config files
To run the first example of the PEA:
cd ../examples
../bin/pea --config ex11_pea_pp_user_gps.yaml
This should create ex11 directory with ex11-ALIC201919900.TRACE and ex1120624.snx output files. You can remove the need for path specification to the executable by adding Ginan's bin directory to ~/.bachrc file:
PATH="path_to_ginan_bin:$PATH"
And an example of POD:
../bin/pod -y ex21_pod_fit_gps.yaml
At the completion of the test run, ex21 directory should be created. The ex21_.sh script will return any differences to the standard test resuts.
Lastly, to run many of the included scripts for fast parsing of .trace/.snx files, plotting of results, automatic running of the PEA based on input date/times and stations, etc. then a number of python dependencies are needed.
The file scripts/conda_gn37.yaml has a list of the necessary python dependencies.
The best way to take advantage of this is to install the Miniconda virtual environment manager.
This will allow you to pass the .yaml file into the conda command and automatically set up a new python environment.
To install Miniconda, download and execute the Miniconda shell file:
wget https://repo.anaconda.com/miniconda/Miniconda3-latest-Linux-x86_64.sh
bash Miniconda3-latest-Linux-x86_64.sh
And follow the on-screen instructions (choosing all defaults is fine).
After installation you can create the gn37 python environment using a prepared receipy. First open a new terminal session and enter:
conda env create -f <dir_to_ginan>/scripts/conda_gn37.yaml
You have now created the virtual python environment gn37 with all necessary dependencies. Anytime you wish you run python scripts, ensure you are in the virtual environment by activating:
conda activate gn37
And then run your desired script from the scripts directory.
We have used routines obtained from RTKLIB, released under a BSD-2 license, these routines have been preserved with minor modifications in the folder cpp/src/rtklib. The original source code from RTKLib can be obtained from https://github.com/tomojitakasu/RTKLIB.
We have used routines obtained from Better Enums, released under the BSD-2 license, these routines have been preserved in the folder cpp/src/3rdparty The original source code from Better Enums can be obtained from http://github.com/aantron/better-enums.
We have used routines obtained from EGM96, released under the zlib license, these routines have been preserved in the folder cpp/src/egm96 The original source code from EGM96 can be obtained from https://github.com/emericg/EGM96.
echo 'We have used this gist to make this readme executable https://gist.github.com/pjeby/c137ace4d91e61e8f1f80e92d84e8b70'
exit $?