Update control module with components names (fusion 360 drawing also …

…updated)
BrainCOGS · Oct 11, 2023 · ce2c424 · ce2c424
1 parent 2f848f7
commit ce2c424
Show file tree

Hide file tree

Showing 2 changed files with 5 additions and 1 deletion.
diff --git a/src/building/assets/images/control/control-assembly-21.png b/src/building/assets/images/control/control-assembly-21.png
diff --git a/src/building/control.md b/src/building/control.md
@@ -33,7 +33,11 @@ We designed a simple solenoid valve driver circuit using a MOSFET, the gate is d
   <img src='./assets/images/control/control-assembly-3.png'>
 </figure>
 
-3. Place each component into place, we place the resistances (R1, R3, R5, R7, and R9 resistor values are 10K Ohm and R2, R4, R6, R8 and R10 resistor values are 1K Ohm) first, then place the MOSFET and finally the diodes, make sure that the diodes are placed correctly (the band should match the ] symbol on the PCB).
+3. Place each component into place, we place the resistances (R1, R3, R5, R7, and R9 resistor values are 10K Ohm and R2, R4, R6, R8 and R10 resistor values are 1K Ohm) first, then place the MOSFET and finally the diodes, make sure that the diodes are placed correctly (the band should match the ] symbol on the PCB). The picture below show the correct position of the components.
+
+<figure>
+  <img src='./assets/images/control/control-assembly-21.png'>
+</figure>
 
 ::: tip
  Each time you place a component in the pad make sure to slightly press it against the solder paste with the same tweezers that you use.