Skip to content

AlexReimann/elevation_mapping_cupy

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Elevation Mapping cupy

Overview

This is a ros package of elevation mapping on GPU.
Code are written in python and uses cupy for GPU calculation.
screenshot

* plane segmentation is coming soon.

Citing

Takahiro Miki, Lorenz Wellhausen, Ruben Grandia, Fabian Jenelten, Timon Homberger, Marco Hutter
Elevation Mapping for Locomotion and Navigation using GPU arXiv

@misc{https://doi.org/10.48550/arxiv.2204.12876,
  doi = {10.48550/ARXIV.2204.12876},
  
  url = {https://arxiv.org/abs/2204.12876},
  
  author = {Miki, Takahiro and Wellhausen, Lorenz and Grandia, Ruben and Jenelten, Fabian and Homberger, Timon and Hutter, Marco},
  
  keywords = {Robotics (cs.RO), FOS: Computer and information sciences, FOS: Computer and information sciences},
  
  title = {Elevation Mapping for Locomotion and Navigation using GPU},
  
  publisher = {arXiv},
  
  year = {2022},
  
  copyright = {arXiv.org perpetual, non-exclusive license}
}

Installation

CUDA & cuDNN

The tested versions are CUDA10.2, 11.6

CUDA
cuDNN.

Check how to install here.

Python dependencies

You will need

For traversability filter, either of

Optinally, opencv for inpainting filter.

Install numpy, scipy, shapely, opencv-python with the following command.

pip3 install -r requirements.txt

Cupy

cupy can be installed with specific CUDA versions. (On jetson, only "from source" i.e. pip install cupy could work)

For CUDA 10.2 pip install cupy-cuda102

For CUDA 11.0 pip install cupy-cuda110

For CUDA 11.1 pip install cupy-cuda111

For CUDA 11.2 pip install cupy-cuda112

For CUDA 11.3 pip install cupy-cuda113

For CUDA 11.4 pip install cupy-cuda114

For CUDA 11.5 pip install cupy-cuda115

For CUDA 11.6 pip install cupy-cuda116

(Install CuPy from source) % pip install cupy

Traversability filter

You can choose either pytorch, or chainer to run the CNN based traversability filter.
Install by following the official documents.

Pytorch uses ~2GB more GPU memory than Chainer, but runs a bit faster.
Use parameter use_chainer to select which backend to use.

ROS package dependencies

sudo apt install ros-noetic-pybind11-catkin
sudo apt install ros-noetic-grid-map-core ros-noetic-grid-map-msgs

On Jetson

CUDA CuDNN

CUDA and cuDNN can be installed via apt. It comes with nvidia-jetpack. The tested version is jetpack 4.5 with L4T 32.5.0.

python dependencies

On jetson, you need the version for its CPU arch:

wget https://nvidia.box.com/shared/static/p57jwntv436lfrd78inwl7iml6p13fzh.whl -O torch-1.8.0-cp36-cp36m-linux_aarch64.whl
pip3 install Cython
pip3 install numpy==1.19.5 torch-1.8.0-cp36-cp36m-linux_aarch64.whl

Also, you need to install cupy with

pip3 install cupy

This builds the packages from source so it would take time.

ROS dependencies

sudo apt install ros-melodic-pybind11-catkin
sudo apt install ros-melodic-grid-map-core ros-melodic-grid-map-msgs

Also, on jetson you need fortran (should already be installed).

sudo apt install gfortran

If the Jetson is set up with Jetpack 4.5 with ROS Melodic the following package is additionally required:

git clone [email protected]:ros/filters.git -b noetic-devel

Usage

Build

catkin build elevation_mapping_cupy

Errors

If you get error such as

Make Error at /usr/share/cmake-3.16/Modules/FindPackageHandleStandardArgs.cmake:146 (message):
  Could NOT find PythonInterp: Found unsuitable version "2.7.18", but
  required is at least "3" (found /usr/bin/python)

Build with option.

catkin build elevation_mapping_cupy -DPYTHON_EXECUTABLE=$(which python3)

Run

Basic usage.

roslaunch elevation_mapping_cupy elevation_mapping_cupy.launch

Run TurtleBot example

First, install turtlebot simulation.

sudo apt install ros-noetic-turtlebot3*

Then, you can run the example.

export TURTLEBOT3_MODEL=waffle
roslaunch elevation_mapping_cupy turtlesim_example.launch

To control the robot with a keyboard, a new terminal window needs to be opened.
Then run

export TURTLEBOT3_MODEL=waffle
roslaunch turtlebot3_teleop turtlebot3_teleop_key.launch

Velocity inputs can be sent to the robot by pressing the keys a, w, d, x. To stop the robot completely, press s.

Subscribed Topics

  • topics specified in pointcloud_topics in parameters.yaml ([sensor_msgs/PointCloud2])

    The distance measurements.

  • /tf ([tf/tfMessage])

    The transformation tree.

Published Topics

The topics are published as set in the rosparam.
You can specify which layers to publish in which fps.

Under publishers, you can specify the topic_name, layers basic_layers and fps.

publishers:
  your_topic_name:
    layers: ['list_of_layer_names', 'layer1', 'layer2']             # Choose from 'elevation', 'variance', 'traversability', 'time' + plugin layers
    basic_layers: ['list of basic layers', 'layer1']                # basic_layers for valid cell computation (e.g. Rviz): Choose a subset of `layers`.
    fps: 5.0                                                        # Publish rate. Use smaller value than `map_acquire_fps`.

Example setting in config/parameters.yaml.

  • elevation_map_raw ([grid_map_msg/GridMap])

    The entire elevation map.

  • elevation_map_recordable ([grid_map_msg/GridMap])

    The entire elevation map with slower update rate for visualization and logging.

  • elevation_map_filter ([grid_map_msg/GridMap])

    The filtered maps using plugins.

Plugins

You can create your own plugin to process the elevation map and publish as a layer in GridMap message.

Let's look at the example.

First, create your plugin file in elevation_mapping_cupy/script/plugins/ and save as example.py.

import cupy as cp
from typing import List
from .plugin_manager import PluginBase


class NameOfYourPlugin(PluginBase):
    def __init__(self, add_value:float=1.0, **kwargs):
        super().__init__()
        self.add_value = float(add_value)

    def __call__(self, elevation_map: cp.ndarray, layer_names: List[str],
            plugin_layers: cp.ndarray, plugin_layer_names: List[str])->cp.ndarray:
        # Process maps here
        # You can also use the other plugin's data through plugin_layers.
        new_elevation = elevation_map[0] + self.add_value
        return new_elevation

Then, add your plugin setting to config/plugin_config.yaml

example:                                      # Use the same name as your file name.
  enable: True                                # weather to laod this plugin
  fill_nan: True                              # Fill nans to invalid cells of elevation layer.
  is_height_layer: True                       # If this is a height layer (such as elevation) or not (such as traversability)
  layer_name: "example_layer"                 # The layer name.
  extra_params:                               # This params are passed to the plugin class on initialization.
    add_value: 2.0                            # Example param

Finally, add your layer name to publishers in config/parameters.yaml. You can create a new topic or add to existing topics.

  plugin_example:   # Topic name
    layers: ['elevation', 'example_layer']
    basic_layers: ['example_layer']
    fps: 1.0        # The plugin is called with this fps.

About

Elevation Mapping on GPU.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Python 64.9%
  • C++ 33.4%
  • CMake 1.7%