OpenROAD is the leading open-source, foundational application for semiconductor digital design. The OpenROAD flow delivers an Autonomous, No-Human-In-Loop (NHIL) flow, 24 hour turnaround from RTL-GDSII for rapid design exploration and physical design implementation.
Documentation is also available here.
OpenROAD eliminates the barriers of cost, schedule risk and uncertainty in hardware design to promote open access to rapid, low-cost IC design software and expertise and system innovation. The OpenROAD application enables flexible flow control through an API with bindings in Tcl and Python.
OpenROAD is used in reserach and commercial applications such as,
- OpenROAD-flow-scripts from OpenROAD
- OpenLane from Efabless
- Silicon Compiler from Zero ASIC
- Hammer from UC Berkeley
- OpenFASoC from IDEA-FASoC for mixed-signal design flows
OpenROAD fosters a vibrant ecosystem of users through active collaboration and partnership through software development and key alliances. Our growing user community includes hardware designers, software engineers, industry collaborators, VLSI enthusiasts, students and researchers.
OpenROAD strongly advocates and enables IC design-based education and workforce development initiatives through training content and courses across several global universities, the Google-SkyWater shuttles also includes GlobalFoundries shuttles, design contests and IC design workshops. The OpenROAD flow has been successfully used to date in over 600 silicon-ready tapeouts for technologies up to 12nm.
OpenROAD provides OpenROAD-flow-scripts as a native, ready-to-use prototyping and tapeout flow. However, it also enables the creation of any custom flow controllers based on the underlying tools, database and analysis engines.
OpenROAD-flow-scripts (ORFS) is a fully autonomous, RTL-GDSII flow for rapid architecture and design space exploration, early prediction of QoR and detailed physical design implementation. However, ORFS also enables manual intervention for finer user control of individual flow stages through Tcl commands and Python APIs.
Figure below shows the main stages of the OpenROAD-flow-scripts:
Here are the main steps for a physical design implementation using OpenROAD;
Floorplanning- Floorplan initialization - define the chip area, utilization
- IO pin placement (for designs without pads)
- Tap cell and well tie insertion
- PDN- power distribution network creation
Global Placement- Minimize wirelengths- Macro placement (RAMs, embedded macros)
- Standard cell placement
- Automatic placement optimization and repair for max slew, max capacitance, and max fanout violations and long wires
Detailed Placement- Legalize placement - align to grid, adhere to design rules
- Incremental timing analysis for early estimates
Clock Tree Synthesis- Generate a balanced tree to meet timing and reduce skews- Insert buffers and resize for high fanout nets
Optimize setup/hold timingGlobal routing- Antenna repair
- Create routing guides
Detailed routing- Legalize routes, DRC-correct routing to meet timing, power constraints
Chip Finishing- Parasitic extraction using OpenRCX
- Final timing verification
- Final physical verification
- Dummy metal fill for manufacturability
- Use KLayout or Magic using generated GDS for DRC signoff
The OpenROAD GUI is a powerful visualization, analysis, and debugging tool with a customizable Tcl interface. The below figures show GUI views for various flow stages including post-routed timing, placement congestion, and CTS.
The OpenROAD application is PDK independent. However, it has been tested and validated with specific PDKs in the context of various flow controllers.
OpenLane supports SkyWater 130nm and GlobalFoundries 180nm.
OpenROAD-flow-scripts supports several public and private PDKs including:
GF180- 180nmSKY130- 130nmNangate45- 45nmASAP7- Predictive FinFET 7nm
These PDKS are supported in OpenROAD-flow-scripts only. They are used to test and calibrate OpenROAD against commercial platforms and ensure good QoR. The PDKs and platform-specific files for these kits cannot be provided due to NDA restrictions. However, if you are able to access these platforms independently, you can create the necessary platform-specific files yourself.
GF55- 55nmGF12- 12nmIntel22- 22nmIntel16- 16nmTSMC65- 65nm
OpenROAD has been used for full physical implementation in over 600 tapeouts in SKY130 and GF180 through the Google-sponsored, Efabless MPW shuttle and ChipIgnite programs.
The OpenROAD project actively adds successfully taped out MPW shuttle designs to the CI regression testing. Examples of designs include Open processor cores, RISC-V based SoCs, cryptocurrency miners, robotic app processors, amateur satellite radio transceivers, OpenPower-based Microwatt etc.
To build OpenROAD tools locally in your machine, follow steps from here.
There are a set of regression tests in test/.
# run all tool unit tests
test/regression
# run all flow tests
test/regression flow
# run <tool> tests
test/regression <tool>
# run <tool> tool tests
src/<tool>/test/regressionThe flow tests check results such as worst slack against reference values.
Use report_flow_metrics [test]... to see all of the metrics.
Use save_flow_metrics [test]... to add margins to the metrics and save them to .metrics_limits.
% report_flow_metrics gcd_nangate45
insts area util slack_min slack_max tns_max clk_skew max_slew max_cap max_fanout DPL ANT drv
gcd_nangate45 368 564 8.8 0.112 -0.015 -0.1 0.004 0 0 0 0 0 0
openroad [-help] [-version] [-no_init] [-exit] [-gui]
[-threads count|max] [-log file_name] cmd_file
-help show help and exit
-version show version and exit
-no_init do not read .openroad init file
-threads count|max use count threads
-no_splash do not show the license splash at startup
-exit exit after reading cmd_file
-gui start in gui mode
-python start with python interpreter [limited to db operations]
-log <file_name> write a log in <file_name>
cmd_file source cmd_file
OpenROAD sources the Tcl command file ~/.openroad unless the command
line option -no_init is specified.
OpenROAD then sources the command file cmd_file if it is specified on
the command line. Unless the -exit command line flag is specified, it
enters an interactive Tcl command interpreter.
A list of the available tools/modules included in the OpenROAD app and there descriptions are available here.
BSD 3-Clause License. See LICENSE file.