Helm Chart for Harbor

Notes: The master branch is in heavy development, please use the other stable versions instead. A high available solution for Harbor based on chart can be find here. And refer to the guide to upgrade the existing deployment.

This repository, including the issues, focus on deploying Harbor chart via helm. So for the functionality issues or questions of Harbor, please open issues on goharbor/harbor

Introduction

This Helm chart installs Harbor in a Kubernetes cluster. Welcome to contribute to Helm Chart for Harbor.

Prerequisites

• Kubernetes cluster 1.10+
• Helm 2.8.0+

Installation

Add Helm repository

helm repo add harbor https://helm.goharbor.io

Configure the chart

The following items can be set via --set flag during installation or configured by editing the values.yaml directly(need to download the chart first).

Configure the way how to expose Harbor service

• Ingress: The ingress controller must be installed in the Kubernetes cluster. Notes: if the TLS is disabled, the port must be included in the command when pulling/pushing images. Refer to issue #5291 for the detail.
• ClusterIP: Exposes the service on a cluster-internal IP. Choosing this value makes the service only reachable from within the cluster.
• NodePort: Exposes the service on each Node’s IP at a static port (the NodePort). You’ll be able to contact the NodePort service, from outside the cluster, by requesting NodeIP:NodePort.
• LoadBalancer: Exposes the service externally using a cloud provider’s load balancer.

Configure the external URL

The external URL for Harbor core service is used to:

1. populate the docker/helm commands showed on portal
2. populate the token service URL returned to docker/notary client

Format: protocol://domain[:port]. Usually:

• if expose the service via Ingress, the domain should be the value of expose.ingress.hosts.core
• if expose the service via ClusterIP, the domain should be the value of expose.clusterIP.name
• if expose the service via NodePort, the domain should be the IP address of one Kubernetes node
• if expose the service via LoadBalancer, set the domain as your own domain name and add a CNAME record to map the domain name to the one you got from the cloud provider

If Harbor is deployed behind the proxy, set it as the URL of proxy.

Configure the way how to persistent data

• Disable: The data does not survive the termination of a pod.
• Persistent Volume Claim(default): A default StorageClass is needed in the Kubernetes cluster to dynamic provision the volumes. Specify another StorageClass in the storageClass or set existingClaim if you have already existing persistent volumes to use.
• External Storage(only for images and charts): For images and charts, the external storages are supported: azure, gcs, s3 swift and oss.

Configure the secrets

• Secret keys: Secret keys are used for secure communication between components. Fill core.secret, jobservice.secret and registry.secret to configure.
• Certificates:
  • notary: Used for authentication during communications. Fill notary.secretName to configure. Notary server certificate must be issued with notary service name as subject alternative name.
  • core: Used for token encryption/decryption. Fill core.secretName to configure.

Secrets and certificates must be setup to avoid changes on every Helm upgrade (see: #107).

Configure the other items listed in configuration section

Install the chart

Install the Harbor helm chart with a release name my-release:

helm 2:

helm install --name my-release harbor/harbor

helm 3:

helm install my-release harbor/harbor

Uninstallation

To uninstall/delete the my-release deployment:

helm 2:

helm delete --purge my-release

helm 3:

helm uninstall my-release

Configuration

The following table lists the configurable parameters of the Harbor chart and the default values.

Parameter	Description	Default
Expose
expose.type	The way how to expose the service: ingress, clusterIP, nodePort or loadBalancer, other values will be ignored and the creation of service will be skipped.	ingress
expose.tls.enabled	Enable the tls or not	true
expose.ingress.controller	The ingress controller type. Currently supports default, gce and ncp	default
expose.tls.secretName	Fill the name of secret if you want to use your own TLS certificate. The secret contains keys named: tls.crt - the certificate (required), tls.key - the private key (required), ca.crt - the certificate of CA (optional), this enables the download link on portal to download the certificate of CA. These files will be generated automatically if the secretName is not set
expose.tls.notarySecretName	By default, the Notary service will use the same cert and key as described above. Fill the name of secret if you want to use a separated one. Only needed when the expose.type is ingress.
expose.tls.commonName	The common name used to generate the certificate, it's necessary when the expose.type is clusterIP or nodePort and expose.tls.secretName is null
expose.ingress.hosts.core	The host of Harbor core service in ingress rule	core.harbor.domain
expose.ingress.hosts.notary	The host of Harbor Notary service in ingress rule	notary.harbor.domain
expose.ingress.annotations	The annotations used in ingress
expose.clusterIP.name	The name of ClusterIP service	harbor
expose.clusterIP.ports.httpPort	The service port Harbor listens on when serving with HTTP	80
expose.clusterIP.ports.httpsPort	The service port Harbor listens on when serving with HTTPS	443
expose.clusterIP.ports.notaryPort	The service port Notary listens on. Only needed when notary.enabled is set to true	4443
expose.nodePort.name	The name of NodePort service	harbor
expose.nodePort.ports.http.port	The service port Harbor listens on when serving with HTTP	80
expose.nodePort.ports.http.nodePort	The node port Harbor listens on when serving with HTTP	30002
expose.nodePort.ports.https.port	The service port Harbor listens on when serving with HTTPS	443
expose.nodePort.ports.https.nodePort	The node port Harbor listens on when serving with HTTPS	30003
expose.nodePort.ports.notary.port	The service port Notary listens on. Only needed when notary.enabled is set to true	4443
expose.nodePort.ports.notary.nodePort	The node port Notary listens on. Only needed when notary.enabled is set to true	30004
expose.loadBalancer.name	The name of service	harbor
expose.loadBalancer.IP	The IP of the loadBalancer. It works only when loadBalancer support assigning IP	""
expose.loadBalancer.ports.httpPort	The service port Harbor listens on when serving with HTTP	80
expose.loadBalancer.ports.httpsPort	The service port Harbor listens on when serving with HTTP	30002
expose.loadBalancer.ports.notaryPort	The service port Notary listens on. Only needed when notary.enabled is set to true
expose.loadBalancer.annotations	The annotations attached to the loadBalancer service	{}
expose.loadBalancer.sourceRanges	List of IP address ranges to assign to loadBalancerSourceRanges	[]
Persistence
persistence.enabled	Enable the data persistence or not	true
persistence.resourcePolicy	Setting it to keep to avoid removing PVCs during a helm delete operation. Leaving it empty will delete PVCs after the chart deleted	keep
persistence.persistentVolumeClaim.registry.existingClaim	Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components
persistence.persistentVolumeClaim.registry.storageClass	Specify the storageClass used to provision the volume. Or the default StorageClass will be used(the default). Set it to - to disable dynamic provisioning
persistence.persistentVolumeClaim.registry.subPath	The sub path used in the volume
persistence.persistentVolumeClaim.registry.accessMode	The access mode of the volume	ReadWriteOnce
persistence.persistentVolumeClaim.registry.size	The size of the volume	5Gi
persistence.persistentVolumeClaim.chartmuseum.existingClaim	Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components
persistence.persistentVolumeClaim.chartmuseum.storageClass	Specify the storageClass used to provision the volume. Or the default StorageClass will be used(the default). Set it to - to disable dynamic provisioning
persistence.persistentVolumeClaim.chartmuseum.subPath	The sub path used in the volume
persistence.persistentVolumeClaim.chartmuseum.accessMode	The access mode of the volume	ReadWriteOnce
persistence.persistentVolumeClaim.chartmuseum.size	The size of the volume	5Gi
persistence.persistentVolumeClaim.jobservice.existingClaim	Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components
persistence.persistentVolumeClaim.jobservice.storageClass	Specify the storageClass used to provision the volume. Or the default StorageClass will be used(the default). Set it to - to disable dynamic provisioning
persistence.persistentVolumeClaim.jobservice.subPath	The sub path used in the volume
persistence.persistentVolumeClaim.jobservice.accessMode	The access mode of the volume	ReadWriteOnce
persistence.persistentVolumeClaim.jobservice.size	The size of the volume	1Gi
persistence.persistentVolumeClaim.database.existingClaim	Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components. If external database is used, the setting will be ignored
persistence.persistentVolumeClaim.database.storageClass	Specify the storageClass used to provision the volume. Or the default StorageClass will be used(the default). Set it to - to disable dynamic provisioning. If external database is used, the setting will be ignored
persistence.persistentVolumeClaim.database.subPath	The sub path used in the volume. If external database is used, the setting will be ignored
persistence.persistentVolumeClaim.database.accessMode	The access mode of the volume. If external database is used, the setting will be ignored	ReadWriteOnce
persistence.persistentVolumeClaim.database.size	The size of the volume. If external database is used, the setting will be ignored	1Gi
persistence.persistentVolumeClaim.redis.existingClaim	Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components. If external Redis is used, the setting will be ignored
persistence.persistentVolumeClaim.redis.storageClass	Specify the storageClass used to provision the volume. Or the default StorageClass will be used(the default). Set it to - to disable dynamic provisioning. If external Redis is used, the setting will be ignored
persistence.persistentVolumeClaim.redis.subPath	The sub path used in the volume. If external Redis is used, the setting will be ignored
persistence.persistentVolumeClaim.redis.accessMode	The access mode of the volume. If external Redis is used, the setting will be ignored	ReadWriteOnce
persistence.persistentVolumeClaim.redis.size	The size of the volume. If external Redis is used, the setting will be ignored	1Gi
persistence.imageChartStorage.disableredirect	The configuration for managing redirects from content backends. For backends which not supported it (such as using minio for s3 storage type), please set it to true to disable redirects. Refer to the guide for more information about the detail	false
persistence.imageChartStorage.caBundleSecretName	Specify the caBundleSecretName if the storage service uses a self-signed certificate. The secret must contain keys named ca.crt which will be injected into the trust store of registry's and chartmuseum's containers.
persistence.imageChartStorage.type	The type of storage for images and charts: filesystem, azure, gcs, s3, swift or oss. The type must be filesystem if you want to use persistent volumes for registry and chartmuseum. Refer to the guide for more information about the detail	filesystem
General
externalURL	The external URL for Harbor core service	https://core.harbor.domain
uaaSecretName	If using external UAA auth which has a self signed cert, you can provide a pre-created secret containing it under the key ca.crt.	``
imagePullPolicy	The image pull policy
imagePullSecrets	The imagePullSecrets names for all deployments
updateStrategy.type	The update strategy for deployments with persistent volumes(jobservice, registry and chartmuseum): RollingUpdate or Recreate. Set it as Recreate when RWM for volumes isn't supported	RollingUpdate
logLevel	The log level: debug, info, warning, error or fatal	info
harborAdminPassword	The initial password of Harbor admin. Change it from portal after launching Harbor	Harbor12345
secretkey	The key used for encryption. Must be a string of 16 chars	not-a-secure-key
proxy.httpProxy	The URL of the HTTP proxy server
proxy.httpsProxy	The URL of the HTTPS proxy server
proxy.noProxy	The URLs that the proxy settings not apply to	127.0.0.1,localhost,.local,.internal
proxy.components	The component list that the proxy settings apply to	core, jobservice, clair
Nginx (if expose the service via ingress, the Nginx will not be used)
nginx.image.repository	Image repository	goharbor/nginx-photon
nginx.image.tag	Image tag	dev
nginx.replicas	The replica count	1
nginx.resources	The resources to allocate for container	undefined
nginx.nodeSelector	Node labels for pod assignment	{}
nginx.tolerations	Tolerations for pod assignment	[]
nginx.affinity	Node/Pod affinities	{}
nginx.podAnnotations	Annotations to add to the nginx pod	{}
Portal
portal.image.repository	Repository for portal image	goharbor/harbor-portal
portal.image.tag	Tag for portal image	dev
portal.replicas	The replica count	1
portal.resources	The resources to allocate for container	undefined
portal.nodeSelector	Node labels for pod assignment	{}
portal.tolerations	Tolerations for pod assignment	[]
portal.affinity	Node/Pod affinities	{}
portal.podAnnotations	Annotations to add to the portal pod	{}
Core
core.image.repository	Repository for Harbor core image	goharbor/harbor-core
core.image.tag	Tag for Harbor core image	dev
core.replicas	The replica count	1
core.livenessProbe.initialDelaySeconds	The initial delay in seconds for the liveness probe	300
core.resources	The resources to allocate for container	undefined
core.nodeSelector	Node labels for pod assignment	{}
core.tolerations	Tolerations for pod assignment	[]
core.affinity	Node/Pod affinities	{}
core.podAnnotations	Annotations to add to the core pod	{}
core.secret	Secret is used when core server communicates with other components. If a secret key is not specified, Helm will generate one. Must be a string of 16 chars.
core.secretName	Fill the name of a kubernetes secret if you want to use your own TLS certificate and private key for token encryption/decryption. The secret must contain keys named: tls.crt - the certificate and tls.key - the private key. The default key pair will be used if it isn't set
core.xsrfKey	The XSRF key. Will be generated automatically if it isn't specified
Jobservice
jobservice.image.repository	Repository for jobservice image	goharbor/harbor-jobservice
jobservice.image.tag	Tag for jobservice image	dev
jobservice.replicas	The replica count	1
jobservice.maxJobWorkers	The max job workers	10
jobservice.jobLogger	The logger for jobs: file, database or stdout	file
jobservice.resources	The resources to allocate for container	undefined
jobservice.nodeSelector	Node labels for pod assignment	{}
jobservice.tolerations	Tolerations for pod assignment	[]
jobservice.affinity	Node/Pod affinities	{}
jobservice.podAnnotations	Annotations to add to the jobservice pod	{}
jobservice.secret	Secret is used when job service communicates with other components. If a secret key is not specified, Helm will generate one. Must be a string of 16 chars.
Registry
registry.registry.image.repository	Repository for registry image	goharbor/registry-photon
registry.registry.image.tag	Tag for registry image
registry.registry.resources	The resources to allocate for container	undefined
registry.controller.image.repository	Repository for registry controller image	goharbor/harbor-registryctl
registry.controller.image.tag	Tag for registry controller image
registry.controller.resources	The resources to allocate for container	undefined
registry.replicas	The replica count	1
registry.nodeSelector	Node labels for pod assignment	{}
registry.tolerations	Tolerations for pod assignment	[]
registry.affinity	Node/Pod affinities	{}
registry.middleware	Middleware is used to add support for a CDN between backend storage and docker pull recipient. See official docs.
registry.podAnnotations	Annotations to add to the registry pod	{}
registry.secret	Secret is used to secure the upload state from client and registry storage backend. See official docs. If a secret key is not specified, Helm will generate one. Must be a string of 16 chars.
registry.credentials.username	The username for accessing the registry instance, which is hosted by htpasswd auth mode. More details see official docs.	harbor_registry_user
registry.credentials.password	The password for accessing the registry instance, which is hosted by htpasswd auth mode. More details see official docs. It is suggested you update this value before installation.	harbor_registry_password
registry.credentials.htpasswd	The content of htpasswd file based on the value of registry.credentials.username registry.credentials.password. Currently helm does not support bcrypt in the template script, if the credential is updated you need to manually generated by calling htpasswd: htpasswd -nbBC10 $username $password. More details see official_docs.	harbor_registry_user:$2y$10$9L4Tc0DJbFFMB6RdSCunrOpTHdwhid4ktBJmLD00bYgqkkGOvll3m
Chartmuseum
chartmuseum.enabled	Enable chartmusuem to store chart	true
chartmuseum.absoluteUrl	If true, ChartMuseum will return absolute URLs. The default behavior is to return relative URLs	false
chartmuseum.image.repository	Repository for chartmuseum image	goharbor/chartmuseum-photon
chartmuseum.image.tag	Tag for chartmuseum image	dev
chartmuseum.replicas	The replica count	1
chartmuseum.resources	The resources to allocate for container	undefined
chartmuseum.nodeSelector	Node labels for pod assignment	{}
chartmuseum.tolerations	Tolerations for pod assignment	[]
chartmuseum.affinity	Node/Pod affinities	{}
chartmuseum.podAnnotations	Annotations to add to the chart museum pod	{}
Clair
clair.enabled	Enable Clair	true
clair.clair.image.repository	Repository for clair image	goharbor/clair-photon
clair.clair.image.tag	Tag for clair image	dev
clair.clair.resources	The resources to allocate for clair container
clair.adapter.image.repository	Repository for clair adapter image	goharbor/clair-adapter-photon
clair.adapter.image.tag	Tag for clair adapter image	dev
clair.adapter.resources	The resources to allocate for clair adapter container
clair.replicas	The replica count	1
clair.updatersInterval	The interval of clair updaters, the unit is hour, set to 0 to disable the updaters	12
clair.nodeSelector	Node labels for pod assignment	{}
clair.tolerations	Tolerations for pod assignment	[]
clair.affinity	Node/Pod affinities	{}
clair.podAnnotations	Annotations to add to the clair pod	{}
Trivy
trivy.enabled	The flag to enable Trivy scanner	true
trivy.image.repository	Repository for Trivy adapter image	goharbor/trivy-adapter-photon
trivy.image.tag	Tag for Trivy adapter image	dev
trivy.resources	The resources to allocate for Trivy adapter container
trivy.replicas	The number of Pod replicas	1
trivy.debugMode	The flag to enable Trivy debug mode	false
trivy.vulnType	Comma-separated list of vulnerability types. Possible values os and library.	os,library
trivy.severity	Comma-separated list of severities to be checked	UNKNOWN,LOW,MEDIUM,HIGH,CRITICAL
trivy.ignoreUnfixed	The flag to display only fixed vulnerabilities	false
trivy.skipUpdate	The flag to disable Trivy DB downloads from GitHub	false
trivy.gitHubToken	The GitHub access token to download Trivy DB (see GitHub rate limiting)
Notary
notary.enabled	Enable Notary?	true
notary.server.image.repository	Repository for notary server image	goharbor/notary-server-photon
notary.server.image.tag	Tag for notary server image	dev
notary.server.replicas	The replica count
notary.server.resources	The resources to allocate for container	undefined
notary.signer.image.repository	Repository for notary signer image	goharbor/notary-signer-photon
notary.signer.image.tag	Tag for notary signer image	dev
notary.signer.replicas	The replica count
notary.signer.resources	The resources to allocate for container	undefined
notary.nodeSelector	Node labels for pod assignment	{}
notary.tolerations	Tolerations for pod assignment	[]
notary.affinity	Node/Pod affinities	{}
notary.podAnnotations	Annotations to add to the notary pod	{}
notary.secretName	Fill the name of a kubernetes secret if you want to use your own TLS certificate authority, certificate and private key for notary communications. The secret must contain keys named tls.ca, tls.crt and tls.key that contain the CA, certificate and private key. They will be generated if not set.
Database
database.type	If external database is used, set it to external	internal
database.internal.image.repository	Repository for database image	goharbor/harbor-db
database.internal.image.tag	Tag for database image	dev
database.internal.initContainerImage.repository	Repository for the init container image	busybox
database.internal.initContainerImage.tag	Tag for the init container image	latest
database.internal.password	The password for database	changeit
database.internal.resources	The resources to allocate for container	undefined
database.internal.nodeSelector	Node labels for pod assignment	{}
database.internal.tolerations	Tolerations for pod assignment	[]
database.internal.affinity	Node/Pod affinities	{}
database.external.host	The hostname of external database	192.168.0.1
database.external.port	The port of external database	5432
database.external.username	The username of external database	user
database.external.password	The password of external database	password
database.external.coreDatabase	The database used by core service	registry
database.external.clairDatabase	The database used by clair	clair
database.external.notaryServerDatabase	The database used by Notary server	notary_server
database.external.notarySignerDatabase	The database used by Notary signer	notary_signer
database.external.sslmode	Connection method of external database (require, verify-full, verify-ca, disable)	disable
database.maxIdleConns	The maximum number of connections in the idle connection pool. If it <=0, no idle connections are retained.	50
database.maxOpenConns	The maximum number of open connections to the database. If it <= 0, then there is no limit on the number of open connections.	100
database.podAnnotations	Annotations to add to the database pod	{}
Redis
redis.type	If external redis is used, set it to external	internal
redis.internal.image.repository	Repository for redis image	goharbor/redis-photon
redis.internal.image.tag	Tag for redis image	dev
redis.internal.resources	The resources to allocate for container	undefined
redis.internal.nodeSelector	Node labels for pod assignment	{}
redis.internal.tolerations	Tolerations for pod assignment	[]
redis.internal.affinity	Node/Pod affinities	{}
redis.external.host	The hostname of external Redis	192.168.0.2
redis.external.port	The port of external Redis	6379
redis.external.coreDatabaseIndex	The database index for core	0
redis.external.jobserviceDatabaseIndex	The database index for jobservice	1
redis.external.registryDatabaseIndex	The database index for registry	2
redis.external.chartmuseumDatabaseIndex	The database index for chartmuseum	3
redis.external.clairAdapterIndex	The database index for clair adapter	4
redis.external.password	The password of external Redis
redis.podAnnotations	Annotations to add to the redis pod	{}