awesome-zsh-plugins

Status

A collection of ZSH frameworks, plugins, tutorials & themes inspired by the various awesome list collections out there.

Table of Contents

• Disclaimer
• Frameworks
  • alf
  • ansible-role-zsh
  • ant-zsh
  • antibody
  • antidote
  • antigen-hs
  • antigen
  • ax-zsh
  • deer
  • dotzsh
  • fresh
  • gh-source
  • miniplug
  • oh-my-zsh
  • PMS
  • prezto
  • pumice
  • sheldon
  • shplug
  • TheFly
  • Toasty
  • uz
  • x-cmd
  • yazt
  • yzsh
  • zap
  • zapack
  • zcomet
  • zeesh
  • zgem
  • zgen
  • zgenom
  • zilsh
  • zim
  • Zinit
  • zinit-4
  • zit
  • zlugin
  • znap
  • zoppo
  • zpacker
  • zpico
  • zplug
  • zpm
  • zr
  • zsh.ai
  • zshing
  • zsh-dot-plugin
  • zsh-mgr
  • zshPlug
  • ztanesh
  • ztheme
  • ztupide
  • zulu
• Setups
  • zgenom
  • zinit
• Prerequisites
• Tutorials
  • Generic ZSH
  • Antigen
  • Oh-My-Zsh
  • Prezto
  • Zgen
  • Zinit (né zplugin)
  • ZSH on Windows
    • superconsole - Windows-only
• Plugins
• Completions
• Themes
• Fonts
• Installation
  • Antigen
  • dotzsh
  • Oh-My-Zsh
  • Prezto
  • Zgen
  • Zgenom
  • zplug
  • zpm
• Writing New Plugins and Themes
• Other Resources
  • ZSH Tools
  • Other Useful Lists
  • Other References
• Thanks

Please read the Contributing Guidelines before contributing.

Disclaimer

While I have done my best to not add entries with embedded malicious code, I don't have the time to sift through the source of every entry in the list.

THIS LIST IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Frameworks

These frameworks make customizing your ZSH setup easier.

You can find some interesting performance timing comparisons of various frameworks in the following locations.

• rossmacarthur/zsh-plugin-manager-benchmark - Contains performance benchmarks for the most popular ZSH frameworks, including both install time and load time.
• pm-perf-test - Tooling for running performance tests on multiple ZSH frameworks.

alf

Alf is an out of this world super fast and configurable framework for ZSH; it's modeled after Prezto and Antigen while utilizing Oh-My-Zsh under the covers; and offers standard defaults, aliases, functions, auto completion, automated updates and installable prompt themes and plugins.

ansible-role-zsh

ansible-role-zsh is an ansible role with zero-knowledge installation. It uses antigen to manage bundles and oh-my-zsh. Can load bundles conditionally. By default it includes the powerlevel9k theme, autosuggestions, syntax-highlighting and fzf-widgets and fzf-marks. Fully customizable.

ant-zsh

Ant-zsh is a tiny and lightweight ZSH configuration environment for special customization needs. It includes plugins, themes and a basic convenient setup.

antibody

Antibody is a faster and simpler antigen written in Golang. More details are available at http://getantibody.github.io/.

antidote

Antidote is a ZSH plugin manager made from the ground up thinking about performance.

It is fast because it can do things concurrently, and generates an ultra-fast static plugin file that you can include in your ZSH config.

It is written natively in ZSH, is well tested, and picks up where Antibody left off.

use-omz enables easy use of Oh-My-ZSH with antidote.

antigen-hs

antigen-hs is a replacement for antigen optimized for a low overhead when starting up a zsh session. It will automatically clone plugins for you.

antigen

Antigen is a small set of functions that help you easily manage your shell (ZSH) plugins, called bundles. The concept is pretty much the same as bundles in a typical vim+pathogen setup. Antigen is to ZSH, what Vundle is to vim. Antigen can load oh-my-zsh themes and plugins and will automatically clone them for you.

ax-zsh

Ax-ZSH is a modular configuration system for ZSH. It provides sane defaults and is extendable by plugins.

Ax-ZSH integrates well with Powerlevel10k and other extensions, including plugins compatible with oh-my-zsh.

deer

A minimalist ZSH plugin manager.

dotzsh

Dotzsh strives to be platform and version independent. Some functionality may be lost when running under older versions of ZSH, but it should degrade cleanly and allow you to use the same setup on multiple machines of differing OSes without problems.

fresh

fresh is a tool to source shell configuration (aliases, functions, etc) from others into your own configuration files. We also support files such as ackrc and gitconfig. Think of it as Bundler for your dot files.

gh-source

gh-source is a plugin manager for people who don't like plugin managers. It's a simple shell function that downloads and installs plugins from GitHub as part of the sourcing step. It's designed to be used with zsh, but it should work with any shell.

miniplug

miniplug is a minimalistic plugin manager for ZSH.

• No crashes or double plugin loading when re-sourcing .zshrc
• Unlike other frameworks, Miniplug does not pollute your $PATH
• Only does the bare minimum for managing plugins

oh-my-zsh

oh-my-zsh is a community-driven framework for managing your ZSH configuration. Includes 120+ optional plugins (rails, git, macOS, hub, capistrano, brew, ant, MacPorts, etc), over 120 themes to spice up your morning, and an auto-update tool that makes it easy to keep up with the latest updates from the community.

PMS

PMS allows you to manage your shell in a way to that helps decrease setup time and increases your productivity. It has support for themes (change the way your shell looks), plugins (adds functionality to your shell), and dotfile management.

The PMS framework also allows you to use the same framework in different shells. Use ZSH on your personal laptop, and use bash on remote servers. Wanna try fish? Go ahead, try out different shells.

prezto

Prezto enriches the ZSH command line interface environment with sane defaults, aliases, functions, auto completion, and prompt themes. There are some prezto-specific plugins at https://github.com/belak/prezto-contrib.

pumice

Pumice is a lightweight plugin manager for ZSH.

sheldon

A fast, configurable, shell plugin manager.

• Can manage
  • Any git repository.
    • Branch/tag/commit support.
    • Extra support for GitHub repositories.
    • Extra support for Gists.
  • Arbitrary remote files, simply specify the URL.
  • Local plugins, simply specify the directory path.
• Highly configurable install methods using handlebars templating.
• Super-fast parallel installation.
• Configuration file using TOML syntax.
• Uses a lock file for much faster loading of plugins.

shplug

An easy solution for managing your shell environments. Works with both bash and zsh. Makes it easy to sync your environment across multiple machines with a git repository.

TheFly

bash/zsh/ksh plugin manager and env teleporter

Makes your shell env and plugins available everywhere (hosts/users)!

Toasty

Toasty is a ZSH framework made to facilitate management, not dictate it.

uz

A ZSH micro plugin manager.

x-cmd

x-cmd is a toolset implemented using posix shell and awk.It is very small in size and offers many interesting features. Here is a milestone demo: https://x-cmd.com/

Tools Provided by x-cmd:

• Wrappers for Common Commands (e.g., cd, ip, ps, tar, apt, brew): These wrapped commands are more intelligent and easier to use compared to the native commands.
• Lightweight Package Management Tool: We have implemented a lightweight package management tool using shell and awk. Through it, you can quickly obtain most common software tools, such as jq, 7za, bat, nvim, python, node, go, etc.
• CLI for Useful Websites (e.g., github.com, cht.sh): We have wrapped their APIs using shell and awk for daily use and to obtain corresponding services in scripts.
• AI Tools: We provide CLIs for ChatGPT, Gemini, Jina.ai, etc., and have wrapped corresponding shortcut commands for different application scenarios, such as @gemini for chatting with Gemini AI and @zh for using AI to translate specified content or command results.

yazt

Yazt is a simple ZSH theme manager in maintenance that is compatible with nearly everything. You can use prompts in plugins, mix 'n' match two themes and with a few modifications, you can even use it in bash.

yzsh

yzsh is a simple ZSH framework for managing plugins, themes, functions, aliases and environment variables.

zap

zap is a minimal ZSH plugin manager.

zapack

zapack is a basic fast minimal ZSH plugin loader.

zcomet

zcomet is a minimalistic ZSH plugin manager that gets you to the prompt surprisingly quickly without caching (see the benchmarks). In addition to loading and updating plugins stored in git repositories, it supports lazy-loading plugins (further reducing startup time) as well as downloading and sourcing code snippets.

zeesh

Zeesh is a cross-platform ZSH framework. It's similar to, but incompatible with, oh-my-zsh. It has a modular plugin architecture making it easy to extend. It has a rich set of defaults, but is designed to be as lightweight as possible.

zgem

zgem is a plugin manager for ZSH that supports loading and updating plugins and themes from git, http and local files.

zgen

Zgen is currently not being actively maintained and I recommend you use the zgenom fork instead, which is actively maintained and continues to get new features.

Zgen is a lightweight plugin manager for ZSH inspired by Antigen. The goal is to have minimal overhead when starting up the shell because nobody likes waiting.

zgenom

A lightweight plugin manager for ZSH that is a fork that extends the brilliant zgen and provides more features and bugfixes while being fully backwards compatible.

To keep loading fast during new terminal sessions, zgenom generates a static init.zsh file which does nothing but source your plugins and append them to your fpath.

This minimizes startup time by not having to execute time consuming logic (plugin checking, updates, etc) during every shell session's startup. The downside is that you have to refresh the init script manually with zgenom reset whenever you update your plugin list in your .zshrc.

Zgenom can load oh-my-zsh-compatible and prezto-compatible plugins and themes, and will automagically git clone plugins for you when you add them to your plugin list.

zilsh

zilsh is a ZSH config system that aims to appeal more to power-users and follow the simplistic approach of vim-pathogen.

zim

Zim is a ZSH configuration framework with blazing speed and modular extensions.

Zinit

Zinit is an innovative and probably (because of the Turbo) the fastest plugin manager with support for:

• Turbo mode – 80% faster ZSH startup! for example: instead of 200 ms, it'll be 40 ms
• Completion management (selectively disable and enable completions)
• Snippets (↔ regular files downloaded via-URL, e.g.: scripts) and through them Oh My Zsh and Prezto plugins support (→ low overhead)
• Annexes (↔ Zinit extensions)
• Reports (from the plugin loads – plugins are no longer black boxes)
• Plugin unloading (allows e.g.: dynamic theme switching)
• bindkey capturing and remapping
• packages
• Clean fpath (the array $fpath is not being used to add completions and autoload functions, hence it stays concise, not bloated)
• Services ↔ a single-instance, background plugins
• Also, in general: all the mechanisms from the ZSH Plugin Standard – Zinit is a reference implementation of the standard.

The project is very active – currently > 3100 commits.

zinit-4

This is Zinit 4 from the original author, who once removed the Zinit repository from GitHub. This spawned a community-driven zdharma-continuum organization that revived all of psprint's ZSH projects. Its main innovations from the @zdharma-continuum fork are:

• AppImage distribution (release link),
• Action complete – press Alt-Shift-A and Alt-Shift-C to complete plugin names and ice modifiers,
• Themes – set $ZITHEME to one of default, blue and gold to set a color set to use for Zinit 4 messages,
• New ice build which is equivalent of three other ices: null, configure and make install and simply builds the project from sources, with support for autotools/CMake/Meson/Scons.

These are the most visible changes, but there are more (like e.g.: support for compiling with libraries from previously built projects/$ZPFX).

zit

zit is a plugin manager for ZSH. It is minimal because it implements the bare minimum to be qualified as a plugin manager: it allows the user to install plugins from git repositories (and git repositories only, that's why the name), source plugins and update them. It does not implement fancy functions like cleanup of removed plugins, automatic compilation of installed plugins, alias for oh-my-zsh/prezto/other ZSH frameworks, building binaries, $PATH manipulation and others.

zlugin

zlugin is a very lightweight ZSH plugin manager.

znap

⚡Znap is a light-weight plugin manager & git repository manager for ZSH that's easy to grok. While tailored for ZSH plugins specifically, Znap also functions as a general-purpose utility for managing git repositories.

Znap can:

• Make any prompt appear instantly. Reduce your startup time from ~200ms to ~40ms with just one command.
• Asynchronously compile your plugins and functions.
• Cache those expensive eval $(commands).
• Clone or pull multiple repos in parallel.
• Re-clone all your repos without you having to re-enter them.
• Multi-repo management
• Automatic compinit and bashinit - you no longer need them in your .zshrc, znap will do them automatically as needed.

zoppo

Zoppo is the crippled configuration framework for ZSH. As an Italian saying goes: "chi va con lo zoppo, impara a zoppicare", we realized we were walking with a cripple and are now going to become crippled ourselves.

zpacker

Zpacker is a lightweight ZSH plugin & theme management framework.

zpico

The minuscule ZSH package manager. No frills, no bloat, just 2 kB of 100% ZSH code, providing complete package management for your ZSH environment.

ZSH package managers are abundant, but most are bloated, slow or have excessive requirements. On top of that, more than a few have been abandoned for years. Zpico does not seek to be the best of the best, rather to balance functionality against a tiny, fast footprint.

zplug

🌺 Zplug is a next-generation ZSH plugin manager.

• Can manage everything
  • ZSH plugins/UNIX commands on GitHub and Bitbucket
  • Gist files (gist.github.com)
  • Externally managed plugins e.g., oh-my-zsh and prezto plugins/themes
  • Binary artifacts on GitHub Releases
  • Local plugins
  • etc. (you can add your own sources!)
• Super-fast parallel installation/update
• Support for lazy-loading
• Branch/tag/commit support
• Post-update, post-load hooks
• Dependencies between packages
• Unlike antigen, no ZSH plugin files (*.plugin.zsh) are required
• Interactive interface (fzf, peco, zaw, and so on)
• Cache mechanism for reducing the startup time

zpm

zpm ( ZSH Plugin Manager ) is a plugin manager for ZSH which combines the imperative and declarative approach. At first run, zpm will do complex logic and generate a cache, after that will only use the cache, so it makes this framework very fast.

• Fastest plugin manager (Really, after the first run, zpm will not be used at all)
• Support for async loading
• Dependencies between packages
• zpm runs on Linux, macOS, FreeBSD and Android.
• zpm plugins are compatible with oh-my-zsh.

zr

zr is a quick, simple ZSH plugin manager written in Rust and easily installable with cargo install zr.

zsh.ai

Focuses on security and hardening of local system. Requires fzf

zshing

zshing is a ZSH plugin manager similar to Vundle/Vim and allows you to...

• Keep track of and configure your plugins right in the .zshrc
• Install ZSH plugins
• Update ZSH plugins
• Search by name all available ZSH Plugins
• Clean unused plugins up
• Run the above actions in a single command
• Manages the Source Plugins of your installed Plugins

zsh-dot-plugin

Customize your .zshrc with only ~21 lines of code. Based on zsh-unplugged.

zsh-mgr

A simple plugin manager for zsh. Features:

• Auto-updates all plugins.
• Auto-updates itself.
• Configurable time interval for both auto-updaters.

zshPlug

zshPlug is a minimalist plugin manager heavily based on zap.

ztanesh

Ztanesh aims to improve your UNIX command line experience and productivity with the the configuration provided by the ztanesh project: the tools will make your shell more powerful and easier to use.

ztheme

ztheme is a small and fast theme engine for ZSH.

ztupide

A simple and fast ZSH plugin manager. It uses zcompile and async loading to speed up your shell startup time.

zulu

Zulu is a environment manager for ZSH 5 or later, which aims to make it easy to manage your shell without writing any code.

• Easily manage your shell environment without editing files.
• Create aliases, functions and environment variables, and have them available to you at the next shell startup.
• Add and remove directories from $path, $fpath and $cdpath with simple commands.
• Install packages, plugins and themes easily, and have them available to you immediately.

Setups

This section is for full setup dropins - they aren't frameworks, but they're not simple plugins/themes either.

zgenom

• zsh-quickstart-kit - A simple quickstart for using ZSH with zgenom. This automatically configures ZSH to use zgenom to load a curated (but easily customizable) collection of plugins and periodically automatically update itself, the plugins, and the quickstart kit itself.

zinit

• ZPWR - An extremely powerful custom terminal environment built on top of Zinit for maximum speed. A full terminal configuration framework including zsh, tmux, fzf, vim and spacemacs configurations. It includes:

• 12.9k+ tab completions

• 1.9k+ aliases

• 330+ git aliases

• 400+ zpwr subcommands

• 2.8k functions

• 175+ zpwr environment variables

• 175+ perl, python, bash, ZSH scripts

• 2.8k line README.md

• 50k+ LOC

• 1 line install

Prerequisites

If you're on a Mac, the zsh that comes with it is usually pretty stale. You can use brew install zsh to update it.

Many of the themes here use special glyphs for things like displaying a branch icon. You'll need to use a Nerd Font or a Powerline-compatible font in your terminal program or you'll see ugly broken boxes where the symbols should be.

Here are a few good sources for Nerd Fonts and Powerline-compatible fonts:

• Awesome Terminal Fonts - A family of fonts that include some nice monospaced Icons.
• Cascadia Code - Microsoft's Cascadia Code
• Fantasque Awesome Font - A nice monospaced font, patched with Font-Awesome, Octoicons, and Powerline-Glyphs.
• Fira Mono - Mozilla's Fira type family.
• Hack - Another Powerline-compatible font designed for source code and terminal usage.
• Input Mono - A family of fonts designed specifically for code. It offers both monospaced and proportional fonts and includes Powerline glyphs.
• Iosevka - Iosevka is an open source slender monospace sans-serif and slab-serif typeface inspired by Pragmata Pro, M+ and PF DIN Mono, designed to be the ideal font for programming.
• Monoid - Monoid is customizable and optimized for coding with bitmap-like sharpness at 15px line-height even on low res displays.
• Mononoki - Mononoki is a typeface by Matthias Tellen, created to enhance code formatting.
• More Nerd Fonts - Another site to download nerd fonts.
• Nerd fonts - A collection of over 20 patched fonts (over 1,700 variations) & the fontforge font patcher python script for Powerline, devicons, and vim-devicons: includes Droid Sans, Meslo, AnonymousPro, ProFont, Inconsolta, and many more. These can be installed with brew - do brew tap homebrew/cask-fonts && brew install --cask fontname
• Powerline patched font collection - A collection of a dozen or so fonts patched to include Powerline glyphs.
• Spacemono - Google's new original monospace display typeface family.
• Victor Mono - Victor Mono is a free programming font with semi-connected cursive italics, symbol ligatures (!=, ->>, =>, ===, <=, >=, ++) and Latin, Cyrillic and Greek characters.

Tutorials

Generic ZSH

• A Beautifully Productive Terminal Experience - Tutorial using a combination of iTerm 2, ZSH, Prezto, Tmux, and Tmuxinator to make for an extremely productive developer workflow.
• A Guide to ZSH Completion With Examples - Explains ZSH autocompletion configuration with examples.
• adamnorwood-zsh - A minimalist but readable ZSH setup based on oh-my-posh.
• Arch Linux's ZSH introduction - Not actually Arch or Linux-specific.
• GH - Setup ZSH on debian/Ubuntu-based linuxes. Installs Powerlevel10k, zsh-completions, zsh-autosuggestions, fast-syntax-highlighting, and more.
• How To Make an Awesome Custom Shell with ZSH - A beginner-friendly tutorial on how to install and configure a ZSH shell.
• commandlinepoweruser.com - Wes Bos' videos introducing ZSH and oh-my-zsh.
• Outrageously Useful Tips To Master Your Z Shell - covers some of the features that ZSH has that Bash doesn't, and using oh-my-zsh.
• Profiling ZSH - Good article about profiling your ZSH setup to optimize startup time.
• rs-example - An example plugin showing how a Rust program can listen to and process commands from ZSH.
• Why ZSH is Cooler than your Shell - slideshare presentation.
• zephyr - Zephyr uses built-in Zsh features to set up better default options, completions, keybindings, history, and much more.
• ZSH for Humans - A turnkey configuration for ZSH that aims to work really well out of the box. It combines a curated set of ZSH plugins into a coherent whole that feels like a finished product rather than a DIY starter kit.
• ZSH Pony - Covers customizing ZSH without a framework.
• ZSH tips by Christian Schneider - An exhaustive list of ZSH tips by Christian Schneider.
• ZSH Unplugged - Good resource if you want to eliminate using a framework but still easily use plugins.

Antigen

• belak/zsh-utils - A minimal set of ZSH plugins designed to be low-friction and low-complexity.
• mgdm.net/weblog/zsh-antigen/ - Michael Maclean's article about switching from oh-my-zsh to antigen.
• Oh-my-zsh is the Disease and Antigen is the Vaccine - Josh Davis' introduction to Antigen.

Oh-My-Zsh

• Configuration to use Hyper.js as a ZSH terminal with a Windows Subsystem Linux on windows 10, with Oh My Zsh and the Powerlevel10k theme - How-to for getting Oh-My-ZSH running on WSL.
• Getting started with oh-my-zsh - A beginners guide to oh-my-zsh by Dien Bui
• How to Install and Configure Z Shell in Ubuntu - Amar Pan's article will walk you through the process of installing and configuring ZSH, including how to change themes and enable the time-saving autosuggestions plug-in.
• iTerm2 + Oh-My-ZSH: Supercharge Your Mac Terminal - Catalin Pit's tutorial on getting started with Oh-My-ZSH on macOS.
• Learn Zsh in 80 Minutes macOS - A beginners guide to using Oh My Zsh on macOS by Karl Hadwen
• Oh-My-Zsh! A Work of CLI Magic - Michiel Mulders installation guide for Ubuntu
• One Key Linux Setup - Simple setup (ubuntu-only) of zsh, oh-my-zsh, tmux, python support and other packages.

Prezto

• A Beautifully Productive Terminal Experience - Mike Buss' blog post about using Prezto, Tmux & Tmuxinator.
• Migrate from Oh-My-Zsh to Prezto - Jerome Dalbert's blog post on migrating to Prezto.

Zgen

• rad-shell - A fantastically feature rich, lightning-fast shell setup, powered by ZSH, Prezto, and Zgen.

Zinit (né zplugin)

• BlaCk-Void-Zsh - 🔮 Awesome, customizable Zsh Starter Kit 🌠🌠. Includes powerline, fzf integration, Weather and image viewing in some terminals.
• zinit-configs - Real-world configuration files (basically a collection of .zshrc files) holding zinit invocations.

ZSH on Windows

superconsole - Windows-only

• ConEmu/zsh out-of-the-box configured to restore previously opened tabs and shell working directories after ConEmu restart
• Choose between clean and inherited environment when starting new SuperConsole sessions
• Custom colorful scheme, colorful output for various commands
• MSYS2 included, zsh and necessary software preinstalled, uses zsh-grml-config
• Uses Antigen for ZSH theme and config management
• Enabled number of ZSH plugins to activate completion, highlighting and history for most comfortable use
• Git-for-Windows repo with proper git and git lfs support for MSYS2 environment is configured, git client already installed.
• ssh-agent for git works out-of-box, add your keys to ConEmu/msys64/ConEmu/msys64/home/user/.ssh dir
• Non-blocking ZSH prompt status updates thanks to agkozak-zsh-prompt
• Command-not-found handler customized for MSYS2 suggests what package to install
• Sets up nano as main editor, enables nano syntax highlighting
• Custom helper scripts added to ConEmu/msys64/3rdparty

Plugins

• 1password - Adds 1Password functionality including a opswd command that wraps the op command. It takes a service name as an argument and copies the password for that service to the clipboard.
• 256color - Enhances the terminal environment with 256 colors. It looks at the chosen TERM environment variable and sees if there is respective ncurses' terminfo with 256 colors available. The result is a multicolor terminal, if available.
• abbr (olets) - Manages auto-expanding abbreviations that expand inline when you hit space, inspired by fish shell.
• abbr-path - Adds functionality of the theme_title_use_abbreviated_path parameter from some oh-my-fish themes.
• abbrev-alias - Provides functionality similar to vim's abbreviation expansion.
• actiona - Make it easier to call actiona scripts from your command line. Includes tab completions.
• activate-py-environment - Automagically detects and activates your python environments (poetry, virtualenv and conda) while traversing directories.
• adonisjs - Plugin for skipping the node part of the ace command.
• ai-commands - Asks GPT (gpt-4-turbo-preview) for CLI commands that achieve the described target action.
• airpods-battery - Looks for AirPods via Bluetooth and puts their battery charge state into $RPROMPT.
• alacritty - Control alacritty color schemes.
• alehouse - Contains short aliases for brew commands, inspired by betterbrew.
• alias-finder - Displays an alias when you use a command you have aliased previously. Helpful for remembering aliases you have defined in the past. Written as a pure ZSH script for speed.
• alias-maker - Allows you to easily create and manage aliases from the command line.
• alias-tips - An oh-my-zsh plugin to help remembering those aliases you defined once.
• allclear - Clears the terminal when you cd into $HOME.
• allergen - A collection of custom ZSH plugins to use with Antigen.
• almostontop - Clears previous command output every time before new command executed in shell. Inspired by the alwaysontop plugin for bash.
• alt-and-select - Binds the alt-c (copy), alt-v (paste), alt-x (cut) keyboard shortcut to a commands: copy-region-as-kill, yank, kill-region. Remaps the execute command to Alt-Shift-X.
• ansible - A plugin for Ansible.
• ansimotd - Adds old-school cool ANSI art when a login shell starts.
• ansiweather - Weather in your terminal, with ANSI colors and Unicode symbols.
• antidote-use-omz - Make using oh-my-zsh with antidote seamless.
• antigen-git-rebase - Antigen/ZSH script to aid with git rebasing.
• anyframe - A peco/percol/fzf wrapper plugin for ZSH.
• apache2 - Adds aliases and functions for managing Apache2.
• apparix - Command line directory bookmarks with jumping to bookmarks, subdirectory tab completion, distant listing etc.
• apple-touchbar - Adds MacBook Pro touchbar support in iTerm 2.
• appup - Adds start, stop, up and down commands when it detects a docker-compose.yml or Vagrantfile in the current directory (e.g. your application). Just run up and get coding!
• apt - For distros with apt package manager. Offers to install missing programs for you.
• arc - Adds aliases for Yandex version control system.
• archlinux (fourdim) - Defines helper functions for pacman on Arch Linux.
• archlinux (junker) - Based on the oh-my-zsh archlinux plugin. Defines helper functions and aliases.
• arduino - Adds scripts to build, upload and monitor arduino sketches from a command line. Requires jq.
• artisan - Laravel artisan plugin for ZSH to help you to run artisan from anywhere in the project tree, with tab completion!
• asciidoctor - A plugin for AsciiDoctor.
• asdf (kiurchv) - Integration and completions for asdf, the extendable version manager, with support for Ruby, Node.js, Elixir, Erlang and more.
• asdf (zimfw) - Initializes asdf, installing it using git if not installed yet. Also, bypasses the shims if you're using the direnv plugin, as suggested by the plugin pro-tips.
• asdf-direnv - Integration and completions for asdf and direnv.
• asdf-prompt - Provides a function usable in prompts that displays version information for your current tool versions.
• ask - Serves as a ChatGPT API frontend, enabling you to interact with ChatGPT directly from the ZSH shell using only cURL and jq.
• assume-role - ZSH plugin to allow you to assume AWS IAM roles easily. Includes completions.
• async - Library for running asynchronous tasks in ZSH without requiring any external tools. Allows you to run multiple asynchronous jobs, enforce unique jobs (multiple instances of the same job will not run), flush all currently running jobs and create multiple workers (each with their own jobs).
• atom-plugin - Based on the Sublime plugin, lets you launch a file or folder in Atom from iTerm 2.
• atuin - Replaces your existing shell history with a SQLite database, and records additional context for your commands. Additionally, it provides optional and fully encrypted synchronisation of your history between machines, via an Atuin server.
• aur-install - Small plugin to install packages from the AUR.
• auto-cenv - Automatically activate a conda environment when entering the project folder.
• auto-color-ls - Automatically list directories with colorls.
• auto-fu.zsh - Automatic complete-word and list-choices. Originally incr-0.2.zsh by y.fujii .
• auto-ls (commanda-panda) - Automatically runs ls or color-ls if available on cd.
• auto-ls (desyncr) - Automatically ls when cding to a new directory.
• auto-notify - Automatically sends out a notification when a long running task has completed.
• auto-nvm - Automatically switches to the node version specified in a given directory.
• auto-pnpm-use - Automatically loads the node version specified in .nvmrc or .npmrc.
• auto-venv - Automatically activates the Python virtual environment in the current directory or its parent directories.
• autocomplete - Automatically lists completions as you type and provides intuitive keybindings for selecting and inserting them.
• autodark (cravend) - Switches between user-specified light and dark themes. Only works on macOS.
• autodark (vbwx) - Switches to another Terminal profile if dark mode is enabled (macOS-only).
• autodotenv - Will prompt you to load variables when you cd into a directory containing a .env file.
• autoenv-extended - Extended version of the zsh-autoenv plugin.
• autoenv - Directory-based environments.
• autojump - A cd command that learns - easily navigate directories from the command line. Install autojump-zsh for best results.
• autopair - A ZSH plugin for auto-closing, deleting and skipping over matching delimiters. Only tested on ZSH 5.0.2 or later.
• autoquoter - A zle widget ("zsh plugin") that will automatically put quotes around arguments to certain commands.
• autosuggestions - Fish-like fast/unobtrusive autosuggestions for ZSH.
• autoswitch-virtualenv - ZSH plugin to automatically switch python virtualenvs and pipenvs when traversing directories. Automatically detects pipenv and poetry projects.
• autoupdate-antibody - A fork of autoupdate-antigen for the Antibody plugin manager, with the added ability to cooperate with static loading.
• autoupdate-antigen - Antigen doesn't do automatic updates like oh-my-zsh. This plugin adds auto updating for antigen, both of antigen and the bundles loaded in your configuration.
• autoupdate-oh-my-zsh-plugins - oh-my-zsh doesn't automatically update non-core plugins, this plugin autoupdates git repositories in the $ZSH_CUSTOM directory.
• autovenv - Automatically activates Python virtual environments when entering their parent directory.
• aws-cli-mfa - AWS CLI MFA plugin based on sweharris' aws-cli-mfa. Supports specifying mfa_device in profile.
• aws-mfa - Plugin for AWS MFA.
• aws-plugin - Adds helper functions for aws command. Includes mfa and assume-role helpers.
• aws-upload - Boost your productivity with aws-upload.
• aws-vault-profiles - Plugin that integrates usage of aws-vault with the $AWS_PROFILE environment variable.
• aws-vault - Plugin for aws-vault. Includes tab completions.
• aws - Forked from the original oh-my-zsh aws. Includes completions for awscli and a few utilities for managing AWS profiles and displaying them in your prompt.
• aws2 - Provides completion support for version 2 of the awscli and a few utilities to manage AWS profiles and display them in the prompt.
• awsssh - List, select and ssh into EC2 instances.
• awsume - Plugin that enables showing the current awsume profile.
• azcli - Helper for using the Azure cli tools.
• azure-keyvault - Makes using Azure keyvaults less verbose from the cli.
• azure-subscription - Displays information about the Azure current Subscription and tenant.
• banner - Displays ANSI/ASCII art on session startup.
• baseballfunfacts - Print random baseball related "fun facts" in your shell. Depends on fortune and cowsay being installed.
• bash-quote - Get random quote from Bash.im.
• bash - Makes ZSH more Bash compatible. It redefines the source command to act more like bash does. It also enables bash completions.
• bat - Adds some helper aliases for bat users.
• battery_state - Show battery state in right-prompt.
• bd - Jump back to a specific directory, without doing cd ../../...
• bepoptimist Remaps vi-mode for the French bépo keyboard.
• bitbucket-git-helpers - Adds helper scripts to allow you to create bitbucket PRs or open a directory in the current branch.
• bitwarden (casonadams) - A Bitwarden CLI fuzzy finder using fzf. Requires jq.
• bitwarden (game4move78) - Adds functions to manage bitwarden sessions.
• bitwarden (kalsowerus) - Opens a fzf widget containing your Bitwarden vault items. Upon selecting an item either the username or password will be either written into the shell or copied into the clipboard. Requires fzf, jq and bitwarden.
• blackbox - Stack Exchange's toolkit for storing keys/credentials securely in a git repository.
• bob - Plugin for bob a cross-platform and easy-to-use Neovim version manager.
• bofh - Adds functions to display random bofh fortunes.
• bol - Prints a random quote when you open a terminal window.
• boss-docker - Manages docker on macOS.
• boss-git - Adds some convenience aliases for git.
• branch-manager - A plugin for managing git branches.
• brave - Manages Brave profiles. With this plugin, you can start the Brave Browser with a specific user profile by using the brave command followed by the profile's name. The plugin also implements autocompletion for the profile names so you won't have to type the entire profile name manually.
• brew (rhuang2014) - Standalone plugin for the Homebrew Package Manager.
• brew (wintermi) - Simple plugin for the Homebrew Package Manager.
• brew (wolffaxn) - Standalone plugin for the Homebrew Package Manager.
• brew-switcher - Automatically switch between Homebrew installations based on the current active arch, arm64 or x86_64, on Apple Silicon Macs.
• browse-commit - A plugin that lets you open any commit in your browser from the command line.
• bruse - Makes it easy to brew link different versions of packages.
• bumblebee - A plugin to toggle prepending optirun in the command line.
• bw - Provides formatting options and easy access to credentials stored in Bitwarden via the Bitwarden CLI. The plugin tries to retrieve a valid session before each action, therefore an explicit login is not nescessary beforehand.
• bws - Simplify and improve the retrieval of secrets from the Bitwarden Secret Manager.
• c - Adds some git shortcuts.
• calc (arzzen) - A calculator for ZSH.
• calc (sam-programs) - Allows you to run math calculations with no prefixes.
• calibre-zaw-source - Calibre - E-book management source for zaw
• caniuse - Add Can I Use support to ZSH.
• careful_rm - A wrapper for rm that adds trash/recycling and useful warnings.
• case - A ZSH plugin that adds two aliases tolower and toupper to switch output case.
• cd-gitroot - A ZSH plugin to cd to the git repository root directory.
• cd-ls - Automatically ls after cd.
• cd-reminder - Display reminders when cd-ing into specified directories.
• cd-reporoot - A ZSH plugin to cd to the current repository checkout's root directory.
• cd-ssh - ssh to a server when you accidentally cd to it.
• cdbk - A ZSH plugin to allow easy named directory creation - shortcuts to any directory you want.
• cdc - Makes it easier to change directories to directories that are subdirs of a user-defined list of directories. Includes tab-completion, session history and pushd, popd and dirs equivalents.
• cdh - Allows users to manage and navigate through a history of directories they have visited. It maintains a history file of directories and provides several commands to interact with this history.
• cdhist - cd history/subdir/locatedir navigation. simple cd history, alias builtin cd to add cd history, rapidily swich to already visited directories, can use locate, mlocate or plocate to rapidly cd to any directory
• cdr - Easy setup of cdr for ZSH.
• change-case - Plugin for fast swap between upper and lower case in your command line. 😎
• cheatsheet - Plugin to easily view, create, and edit cheatsheets.
• check-deps - Helper for ZSH plugins that allows them to show how to install any missing dependencies. Works on Debian (and derivatives like Ubuntu), Arch and its derivatives, Node.js and ZSH plugins if you are using the zpm framework.
• chgo - Clone of chruby modified to make it easy to switch between multiple Go versions.
• clean-project - Remove files from projects (automatically by default). Useful for keeping .DS_Store and Thumbs.db files from cluttering your directories.
• clipboard - Adds a cross-platform helper function to access the system clipboard. Works on macOS, X11 (and Wayland) and Cygwin.
• cmaker - Makes using cmake easier.
• cmd-status - Reports the status of commands including return code and duration.
• cmd-time - Collects the execution time of commands and exports the result to a variable that can be used elsewhere. It is similar to the built-in REPORTTIME function, but it is also slightly different. Unlike when you set REPORTTIME, it considers user and sytem time, not just CPU time.
• cmdtime - Displays the duration of a command to the terminal forked from the timer plugin.
• code-review - Launches git difftool on git merge-base target_branch base_branch and target_branch.
• code-stats - Counts keypresses and logs stats to Code::Stats.
• codex - Enables you to use OpenAI's powerful Codex AI in the command line.
• coffee-time - Adds the caf alias, which runs caffeinate -dims. The extra flags keep everything awake: the system, the drive, and the display.
• color-logging - provides a really easy to use logging library with notifications for pushbullet and pushover, colorizes tools like cat and ls and provides a color library.
• colored-man-pages-mod - Forked from ohmyzsh/ohmyzsh/plugins/colored-man-pages. Colorizes man output.
• colored-man-pages - Colorize man pages.
• colorize-functions - Colorizes functions for ZSH.
• colorize - Colorize the output of various programs.
• colorls - Defines a few helpful shortcuts to some colorls functions.
• colors (Tarrasch) - Makes it easier to colorize text from the CLI. red foo just works.
• colors (zpm-zsh) - Enhanced colors for ZSH.
• command-execution-timer - Displays the time an interactive shell command takes to execute.
• command-not-found (freed-wu) - Uses the command-not-found package for ZSH to provide suggested packages to be installed if a command cannot be found.
• command-not-found (tarrasch) - A mirror of the oh-my-zsh command-not-found plugin so you don't have to include all of oh-my-zsh.
• command-note - Record complex commands and comment on them.
• command-time - Show execution time for long commands in ZSH and powerlevel9k. Similar to REPORTTIME builtin, but only outputs when user + system time >= REPORTTIME.
• communism - Displays a Marx quote of the day.
• compe - Add completion for nvim-compe.
• completion-generator - This plugin tries to read the list of options from the help text of programs and generate a completion function automatically. Note that this doesn't do it automatically, you have to explicitly call the generator to create a completion script.
• conda (themysciradata) - Adds function to provide a prompt segment for conda and aliases for some base functions.
• conda (wardhanisukoco) - Automatically loads conda and provides functions for detecting conda versions for use in themes.
• conda-init - Cleans up environment variables so conda doesn't mess up tmux.
• condaenv - Provides a condaenv_prompt_info function which returns the current conda environment name.
• confer - Tries to find program configuration files automatically so you can do things like conf vim to edit your vim configuration files.
• containers - Provides aliases and better interoperability between podman and docker commands based on which you have installed.
• copy-pasta - Copy and paste files in your terminal like you would in a GUI.
• copyzshell - A ZSH plugin to copy your shell configuration to another machine over ssh.
• crash - Adds proper error handling, exceptions and try/catch for ZSH.
• crayon-syntax - ZSH syntax highlighting for the Crayon Plugin for Wordpress.
• cros-auto-notify - Automatically sends out a notification when a long running task has completed. Works with macOS and linux (if hterm-notify is installed).
• crypto-prices - Add a powerlevel9k segment with the current bitcoin price.
• crystal - A plugin for Crystal.
• cvideo - Quickly compress video with ffmpeg.
• cycle-fav-dirs - A plugin to cycle through your favourite directories.
• cycle-jobs - The ZSH Cycle Jobs Plugin is a simple yet powerful tool that enhances your terminal workflow by allowing you to cycle through background jobs using a single keyboard shortcut. This plugin is particularly useful for developers and system administrators who frequently work with multiple background processes.
• czhttpd - A simple http server written in 99.9% pure ZSH.
• ddev - A ZSH plugin for the ddev tool for setting up PHP development environments.
• declare-zsh - A parser for zinit commands in .zshrc. It allows you to perform the following actions on .zshrc from the command-line - enable and disable plugins add or remove snippets.
• deepx - Collection of useful and fun commands to improve workflow and quality of life.
• deer - A file navigator for ZSH heavily inspired by ranger.
• def - Allows you to specify and run a default command in any directory of your choice.
• defer - Defers execution of a zsh command until zsh has nothing else to do and is waiting for user input. Its intended purpose is staged zsh startup. It works similarly to Turbo mode in zinit.
• delete-prompt - ZSH widget to delete the prompt texts within the current line. It is useful when executing pasted commands from the web or a README. A leading non-alphanumeric character + space is detected as a prompt.
• deno (cowboyd) - Useful deno aliases and settings.
• deno (tricked-dev) - Automatically installs deno to $HOME/.deno on startup if deno is not already installed.
• depot-tools - Simple oh-my-zsh plugin for installing the chromium depot_tools. Installing this plugin will add all of the chromium depot_tools to your $PATH automatically.
• dev - Provides a lightweight version of Shopify's internal dev tool
• dietpi - Adds utilities for dietpi to your $PATH (and includes aliases to automagically run them with sudo) when you log into a machine running dietpi.
• diff-so-fancy - Automatically installs diff-so-fancy and enables its use in ZSH and git.
• diractions - Allow you to map a short logical/mnemonic name to directories to quickly access them, or perform actions in them.
• dirbrowse - Customized version of the dirbrowse plugin in oh-my-zsh.
• dircolors-solarized (joel-porquet) - Solarized dircolors plugin, with options for dark or light terminal backgrounds.
• dircolors-solarized (pinelibg) - Enables Solarized Color Theme for GNU ls.
• dircycle - Cycle through the directory stack.
• directory-history - A per directory history for ZSH which implements forward/backward navigation as well as substring search in a directory sensitive manner.
• direnv - A plugin for installing and loading direnv. Inspired by zsh-pyenv.
• dirrc - Executes .dirc when present in a directory you cd into.
• dirstack - Plugin for displaying the dirstack info on a single line.
• doas (anatolykopyl) - Easily prefix your current or previous commands with doas by pressing ESC twice.
• doas (senderman) - Easily prefix your current or previous commands with doas by pressing ESC twice.
• docker-aliases - Docker aliases for everyday use.
• docker-compose - Show docker container status in your prompt.
• docker-helpers - A collection of docker helper scripts.
• docker-machine - A docker-machine plugin for ZSH.
• docker-run - Go back to running your commands "naturally", we'll handle the container.
• dogesh - Dogification plugin.
• dot-up - Converts ..., ...., ....., etc., into cd commands to navigate parent directories.
• dotbare - Interactive dotfile management with the help of fzf.
• dotfiles - Keep your dotfiles in sync across multiple machines using git.
• dotpyvenv - Automagically switch to a python virtual environment located (that you previously have created with virtualenv program) in a directory named .pyvenv when you cd into a directory.
• download - Helper to download files with aria2c.
• dropbox - A dropbox plugin for ZSH that provides dropbox-cli and dropbox-uploader commands.
• drupal - Adds aliases for common tasks and also tab-completion for drush. Inspired by Artisan.
• dune-quotes - Random Dune quote generator plugin.
• duration - Displays command duration if it exceeds a user-settable run time.
• dwim - Attempts to predict what you will want to do next. It provides a key binding (control-u) that will replace the current (or previous) command line with the command you will want to run next.
• easy-motion - A port of vim-easymotion for ZSH.
• ec2ssh - List EC2 instances and ssh login to the instances easily.
• editing-workbench - Adds sane, complex command line editing (e.g. incremental history word completion).
• edward cli - Adds smart completions and alises for edward CLI micro-service launcher.
• elixir - Adds shortcuts for Elixir, IEX, Mix, Kiex and Phoenix.
• emacs (cowboyd) - Make Emacs the default for CLI operations like editing git commit messages; set up handy aliases.
• emacs (flinner) - Uses the Emacs daemon capability, allowing the user to quickly open frames, whether they are opened in a terminal via a ssh connection, or X frames opened on the same host.
• emoji-cli - 😱 Emoji completion on the command line.
• emoji-fzf - Configurable ZSH plugin for the excellent emoji-fzf. It is heavily inspired by emoji-cli.
• emojis - Adds numerous ASCII art emojis to your environment in convenient variables.
• enhancd - A simple tool that provides an enhanced cd command by memorizing all directories visited by a user and use it for the pathname resolution.
• envrc - Automatically loads and unloads environment variables if a .envrc file is found in a directory.
• escape-backtick - Quickly insert escaped backticks when double-tapping "`".
• evalcache - Caches the output of a binary initialization command like eval "$(hub alias -s)", to help lower shell startup time by loading from cache instead of re-running every new shell session.
• evil-registers - Extends ZLE vi commands to remotely access named registers of the vim and nvim editors, and system selection and clipboard.
• exa (DarrinTisdale) - Enables a number of aliases extending exa, the modern replacement for ls.
• exa (mohamedelashri) - Adds aliases for exa, a modern replacement for ls.
• exa (ptavares) - Installs and loads exa.
• exa (ritchies) - Adds aliases to make using exa easier.
• exa (todie) - Integration and completions for exa, a modern replacement for ls.
• exa (zap-zsh) - Overrides common commands to use exa instead.
• exa (zplugin) - replace ls with ogham/exa.
• exa (zshell) - replace ls with ogham/exa.
• exa-ls (zpm-zsh) - Zsh plugin for ls.
• exa-ls - Adds aliases so that you can use exa as a drop-in replacement for ls and tree.
• exercism - A plugin for exercism.io.
• expand-ealias - Expand specific aliases with space.
• expand - Expands regular aliases, global aliases, incorrect spellings and phrases, globs, history expansion and $parameters with the spacebar key.
• expander - A zle widget that allows you to write custom expanders and select them with fzf.
• explain-shell (brokentoaster) - Uses lynx to look up the current command line on explainshell.com.
• explain-shell (gmatheu) - Opens commands on explainshell.com.
• extend-history - Extends command history by adding the exit code for each command in the history.
• ez-cmd - Simplifies and streamlines common command-line tasks by providing easy-to-use shortcuts and aliases.
• ez-compinit - Wraps compinit, queueing up calls to compdef, and hooking the real compinit call to an event that runs at the end of your .zshrc. That way you get all the benefits of calling compinit early without any of the downsides.
• eza (clavelm) - Replaces ls with eza-community/eza.
• eza (mohamedelashri) - Adds aliases for eza, a modern replacement for ls.
• eza (twopizza9621536) - Replaces ls with eza-community/eza.
• eza (z-shell) - Replaces ls with eza-community/eza.
• eza-ls - Adds aliases allowing [eza(https://github.com/eza-community/eza)], to act as a drop-in replacement for ls and tree.
• f-shortcuts - Makes a shortcuts toolbar using F1 to F12 keys.
• fancy-ctrl-z - Broken out version of the version in oh-my-zsh so users of other frameworks don't have to import all of oh-my-zsh.
• fast-alias-tips - Helps remember the aliases you defined and forgot about. Ported from djui/alias-tips. Active fork of sei40kr/zsh-fast-alias-tips.
• fast-syntax-highlighting - Optimized and improved zsh-users/zsh-syntax-highlighting – better response times, switchable highlight themes.
• fastcache - Caches command output to improve shell startup time.
• fav - ZSH/fzf plugin that makes it really easy to add and recall named favorites of your important directories.
• favorite-directories - Fast jumps to your favorite directories.
• fd-plugin - Adds aliases for fd, a modern replacement for find.
• fd - Use fzf to browse directories.
• figures - Unicode symbols for ZSH.
• firebase (rmrs) - Add an indicator in the prompt that you're in a directory with a firebase.json file (aka "firebase project").
• firebase (seqi) - Display the current working project or project alias when in a Firebase project directory or subdirectory.
• firmine - Includes decorators for user@hostname, date & time, current directory and Kaomoji icons for last command exit status.
• fixnumpad-osx - Enables numpad keys of Apple keyboards to be recognized in ZSH.
• flatpak - Adds aliases for Flatpak.
• flow-plugin - This plugin makes the flow command available inside every subdirectory of the TYPO3 Flow distribution.
• fnm (dominik-schwabe) - Installs and loads the Fast Node Manager (fnm) if it is missing.
• fnm (wintermi) - Helper plugin for the fast and simple Node.js version manager fnm.
• forgit - Utility tool for git which takes advantage of fuzzy finder fzf.
• functional - ZSH higher order functions.
• fuzzy-search-and-edit - ZSH plugin for fuzzy searching files and instantly opening a matched file on matched line.
• fuzzy-wd - Adds fuzzy search for directories warped with the WD plugin.
• fz - Seamlessly adds fuzzy search to z's tab completion and lets you easily jump around among directories in your history.
• fzf (gimbo) - Helpers for using fzf in ZSH. Requires brew.sh.
• fzf (unixorn) - Enables fzf history and file searches.
• fzf-copyq-clipboard - Add fzf support for CopyQ.
• fzf-dir-navigator - This is a cool and user-friendly directory navigation plugin for zsh using fzf that allows the user to switch to any directory from anywhere and to anywhere. It also maintains a history of recently visited directories. Additionally, you can use hotkeys to move back and forth between directories in the shell session.
• fzf-fasd - Integrates fzf and fasd --- tab completion of z with fzf's fuzzy search!
• fzf-finder - Plugin to have a cool search keybinding with fzf and (optionally) bat and fd. Falls back to find and cat. Searches in the local tree of subdirectories for files.
• fzf-history-search - Replaces Ctrl+R with an fzf-driven history search that includes date/times.
• fzf-it - Make any command interactive wrapping it with fzf functionality.
• fzf-marks - Little script to create, navigate and delete bookmarks in bash and zsh, using the fuzzy finder fzf.
• fzf-packagemanager - Adds commands for installing tools via various package managers using fzf. Supports apt, brew & dnf.
• fzf-pass - Better handling of passwords using fzf and pass.
• fzf-plugin - oh-my-zsh's fzf plugin extracted so it can be used easily with other plugin managers.
• fzf-prezto - Prezto plugin that finds where fzf has been installed and enables its auto-completion and key-bindings. This plugin works as a Prezto zstyle configuration option.
• fzf-tab-widgets - Adds widgets for fzf-tab.
• fzf-tab - Replace ZSH's default completion selection menu with fzf.
• fzf-tools - Provides functions, aliases and key-bindings for commands such as alias, find, ls, man, printenv that are designed to enhance your command-line workflow by making them to default to filtering through fzf, allowing you to quickly find files, search & run commands from history, run scripts of many supported types, browse git commits, and more.
• fzf-utils - Provides functions to kill proceses and find in path with fzf.
• fzf-widgets - Adds some ZLE widgets for fzf.
• fzfsh - Add fzf plugins for chezmoi, docker, git, kubectl and pass.
• fzy - Plugin that uses fzy for certain fuzzy matching operations.
• gcloud-project - Easy selection of Google Cloud Projects.
• gcloud - Finds the installed gcloud sdk and sources the zsh file there, along with the zsh completions file.
• gdbm - Adds GDBM as a plugin.
• gentoo - Adds some aliases and functions to work with Gentoo Linux.
• geometry-datetime - Geometry datetime plugin. Shows datetime (date unix command) in your prompt.
• geometry-hydrate - Geometry plugin to remind you to hydrate.
• geometry-npm-package-version - Geometry plugin to display the current folder's npm package version.
• geometry-rust-version - Geometry plugin to display the current folder's Rust version when either a .rs or Cargo.toml is present.
• get-jquery - Plugin for fast downloading the jQuery library from code.jquery.com.
• ghost-zeus - Lets you use zeus with normal rails commands.
• gimbo-git - A subset of the oh-my-zsh git plugin aliases, plus some new aliases, plus a few handy functions.
• gimme - Manage Go installations with gimme.
• git-acp - Take the current command line as the commit message and then run git pull, git add, git commit and git push with one keystroke.
• git-add-remote - Easily add the upstream remote to your git fork.
• git-aliases (mdumitru) - Broken out version of the version in oh-my-zsh so users of other frameworks don't have to import all of oh-my-zsh.
• git-aliases (peterhurford) - Creates a lot of useful aliases for combinations of commonly used git commands.
• git-aliases (remino) - Aliases all git xyz commands to gxyz. Also aliases g to git.
• git-arc - Adds aliases and functions for git-arc, a FreeBSD development tool.
• git-branches - Makes a menu of git branches you can switch to without having to type long branch names.
• git-check - Adds a ZSH hook to check if the origin of the current branch has changes to local in the background and sends a notification.
• git-clean-branch - Cleans up dead git branches.
• git-complete-urls - Enhance git completion to include in the remotes completion (e.g. from git clone) any URL in the clipboard.
• git-extra-commands - Extra git helper scripts packaged as a plugin.
• git-flow-avh - Adds short aliases for the git-flow commands.
• git-fuzzy - A CLI interface to git that relies heavily on fzf.
• git-gen - Handle git bulk branch delete and create operations.
• git-ignore - Generates .gitignore files from gitignore.io offline. fzf, completion, preview integrated.
• git-is-clean - This function will return true or false depending on if it finds out your git repo is dirty or not.
• git-it-on - Adds ability to open a folder in your current branch on GitHub.
• git-lfs - Adds short aliases for the git-lfs commands.
• git-patch - Adds custom functions and aliases to the oh-my-zsh git plugin.
• git-plugin (dark-kitt) - git integration that displays the current directory and git branch.
• git-plugin (rcruzper) - Adds some functions for git.
• git-prompt-enhanced - Provides a more granular information about a git repository.
• git-prompt-useremail - Adds prompt reminders for git user.email.
• git-prune (diazod) - Allows you to delete all branches that are already merged in your local git repository and/or that were merged in your remote origin git repository.
• git-prune (seinh) - Plugin that simplifies deleting merged branches in a git repository.
• git-scripts - Adds git-squash-branch and git-remove-merged commands.
• git-secret - A bash-tool to store your private data inside a git repository.
• git-smart-commands - Adds extra git commands to make some common git usages more efficient.
• git-smart-commends-wrapper - Wraps git-smart-commands to make it compatible with the oh-my-zsh plugins system.
• git-status - Exposes functions with information about the current git repository.
• git-switch-branch-skim - Allows you to switch git branches with skim
• git-sync - A ZSH plugin to sync git repositories and clean them up.
• git-tree - fzf powered git worktree helper.
• git-worktree - Wraps some git worktree operations for simplicity and productivity. Includes fzf tooling.
• git-worktrees - Makes git worktrees more functional. Includes tab completions.
• git - Replacement for the stock oh-my-zsh git plugin. Provides quite a few useful aliases and functions. The motivation to replace the default plugin stems from the fact that it comes with some inconsistencies that make a few popular commands rather unintuitive, so this plugin makes the aliases consistent.
• gitcd (SukkaW) - Adds command to git clone a repository and cd into the resulting directory.
• gitcd (viko16) - Automatically cd to a git working directory after cloning it.
• gitfast - Updated fork of the oh-my-zsh gitfast plugin.
• gitgo - Open a GitHub/GitLab repository in your browser from the command line (macOS only).
• github-folders - Organizes your GitHub checkouts for you.
• github - Fork of the original GitHub plugin embedded in oh-my-zsh.
• gitignore - Plugin for creating .gitignore files.
• gitio (denysdovhan) - A ZSH plugin for generating a GitHub short URL using git.io.
• gitio (nicolodiamante) - Uses git.io to shorten git urls.
• gitstatus - Makes it easy to show your git status in your prompt.
• gitsync - ZSH plugin to improve workflows for one person developing on the same repository on multiple machines.
• goenv (bbenne10) - Manage $GOPATH similarly to Python's virtualenvwrapper.
• goenv (cda0) - Plugin for installing, updating and loading goenv.
• goenv (heyvito) - Automatically reads .goenv files in the current directory and sets GOPRIVATE environment variables.
• going_places - A plugin that helps to use, create and maintain a list of shell locations.
• golang - Adds tooling for the Go programming language toolchain.
• golinks - Launch golinks from your terminal.
• gpg-agent - Plugin that tries to do the right thing when it comes to setting up the GPG agent to act as an SSH agent as well on macOS.
• gpg-crypt - ZSH plugin to encrypt and decrypt files or directories in place.
• gpg - Adds helpful aliases for using gpg.
• gpt - Enable querying ChatGPT from the command line.
• grep2awk - ZLE widget to transform grep command into awk command.
• grunt-plugin - Add autocompletion for grunt.
• gsh - Collection of helper functions for git
• gtm-terminal-plugin - terminal plugin for git time metrics.
• gtr - Allows fast tagging of a release in git using the tag name *release-YYYY-MM-DD-HH-MM- and headline Release YYYY-MM-DD HH:MM.
• guish - Collection of utility functions and aliases.
• gumsible - Wrapper plugin for Molecule.
• gunstage - There are at least eight ways to unstage files in a git repository. This is a command-line shell plugin for undoing git add.
• gvm (dgnest) - A gvm (Go version manager) plugin for ZSH.
• gvm (yerinle) - Provides autocompletion for gvm (Groovy enVironment Manager).
• hab - Automatically loads OS environment variables defined in the file .envrc if it's found when changing to a new directory.
• hacker-quotes - Outputs a random hacker quote when you open a terminal.
• hadoop-plugin - Adds some convenience aliases for hadoop functions.
• haiku - Prints a haiku promoting work-life balance and stress management once every 24 hours when the terminal is open.
• hanami - ZSH plugin for hanami projects.
• hangul - Auto correct hangul(한글, korean) to English when it was supposed to be typed in English. 영어를 타이핑 해야되는데 한글로 타이핑된경우 자동으로 수정합니다.
• hbt - Heuristic ZSH suggestion system based on past command usage.
• hebzsh - If a command is not found as typed in Hebrew, translates the command as if it was typed on a keyboard with a US English layout and tries again.
• help - Colorizes the output of commands run with --help.
• hints - Display glob and parameter flags and other non completable info right under your editing buffer.
• hipchat - Send hipchat messages from the shell.
• hist-delete - Delete history items from zsh's fzf Ctrl+R history search.
• hist - Edit your history in ZSH, without ever leaving the command line.
• histdb - Stores your history in an SQLite database. Can be integrated with zsh-autosuggestions.
• historikeeper - Captures history in a database.
• history-enquirer - Enhances history search with more interaction and a multiline selection menu. Requires Node.js.
• history-filter - Allows you to specify patterns that will automatically exclude commands from being inserted into your permanent history. Particularly useful for preventing secrets being written.
• history-here - Binds ^G to quickly toggle the current shell history file location.
• history-on-success - Save yourself from repeating the same mistakes by filtering out your unsuccessful commands from your zsh history file. Based on a blog post by Dean Scarff.
• history-popup - Captures the PageUp key and uses dialog to open a popup menu with the history, so the user can interactively navigate through it and pick the history line to bring back to the prompt.
• history-search-multi-word - A syntax highlighted, multi-word history searcher for ZSH, bound to Ctrl-R, with advanced functions (e.g. bump of history entry to top of history).
• history-substring-search - Needs to be loaded after zsh-syntax-highlighting, or they'll both break. You'll also need to bind keys to its functions, details are in the README.md.
• history-sync (vitobotta) - Syncs your ZSH history across computers using a git private repository. Uses openssl to encrypt the history.
• history-sync (wulfgarpro) - An oh-my-zsh plugin for GPG encrypted, Internet synchronized ZSH history using git.
• history - Extend history so that it can be queried by SQL.
• hitokoto - Displays a random quote from hitokoto.cn.
• homeassistant-cli - Provides completion and (configuration) helpers for the Home Assistant Command-line interface (hass-cli). and allows command line interaction with Home Assistant instances.
• homebrew - Plugin for homebrew that supplements the one built into oh-my-zsh and can safely run with it enabled.
• hooks - Add missing hooks - for plugins and personal use.
• host-switch - Make it easier to switch in different /etc/hosts files during development.
• hub-ci-zsh-plugin - A simple plugin for adding hub ci-status to your ZSH theme.
• hub - ZSH plugin for forking model.
• hypnosnek - Simple utilities with p10k integration for managing python environments.
• igit - Interactive git commands using fzf.
• incsearch - Friendlier vim mode for ZSH. Moves cursor with incremental search within current line.
• ing - Streamlined ping output.
• instant-repl - Activate a REPL for any command in your current ZSH session.
• interactive-cd - Fish-like interactive tab completion for cd.
• iosctl - Quickly access App, Data, and Log of the running simulator.
• ipip - Plugin for IPIP.
• iterm-tab-color - Adds function to set the tab color in iTerm2 and can automatically change color based on cwd or command being executed.
• iterm-tab-colors - Automatically changes iTerm 2 tab color based on the current working directory.
• iterm-tmux-color-tabs - Every new tmux tab opened in iTerm2 will have the next colour from the default or specified palette.
• iterm-touchbar - Display iTerm2 feedback in the MacbookPro TouchBar (Current directory, git branch & status).
• iterm2-colors - Manage your iTerm 2's color scheme from the command line.
• iterm2-shell-integration - Shell integration and utilities for iTerm2.
• iterm2-tabs - Set colors and titles of iTerm 2 tabs.
• iterm2 - Packs iTerm 2's ZSH integration scripts into a ZSH plugin to avoid polluting your $HOME directory, with a negligible time increase of only 2ms.
• iwd - Similar in concept to $PWD, this ZSH plugin saves your initial working directory in $IWD for easy returns to the starting point of your session.
• jabba - Adds shell integration code and completions for the jabba Java version manager.
• java-zsh-plugin - Adds a setjdk command so you can switch easily between different versions of the jdk.
• javaVersions - Change between different java versions with a single command.
• jdk-switch - Switches between jdk versions. Works on macOS and Linux.
• jenkins - A jenkins plugin for ZSH, heavily inspired by the excellent jira plugin.
• jenv-lazy - A ZSH plugin for lazy loading of jEnv.
• jhipster - Adds commands for jHipster.
• jira-plus - Create JIRA tickets from the command line.
• jq - Interactively build jq expressions. Also supports gojq. Requires fzf.
• jrgit - Provides a suite of functions to streamline the Git user experience. It includes features for installing and configuring Git, handling large files with Git LFS, improving diff outputs, and managing credentials and keys securely.
• jvm - Allows selection of JDK on macOS.
• k - Directory listings for ZSH with git status decorations.
• k3d - Adds aliases and tab completions for k3d.
• kctl - Add helper aliases for kubectl.
• kill-node - ZSH plugin for murdering node process families.
• kitsunebook - KitsuneBook plugin for oh-my-zsh.
• kiwi - Dog-themed, includes git status and last command exit status decorators.
• konsole-theme-changer - Toggle konsole theme from ZSH.
• kube-aliases - Adds functions and aliases to make working with kubectl more pleasant.
• kube-ps1 - ZSH plugin for kubectl that adds current context and namespace.
• kubecolor (devopstales) - Adds aliases for the kubecolor command.
• kubecolor (droctothorpe) - Simplify and colorize the output of kubectl get events -w
• kubecolor (trejo08) - Prints colorized outputs from kubectl. Includes helper functions.
• kubeconfig-mgr - Makes managing multiple kubeconfig files easier.
• kubectl-config-switcher - Switch between config files in ~/.kube via the KUBECTL environment variable.
• kubectl-prompt - Display information about the kubectl current context and namespace in your ZSH prompt. Creates ZSH_KUBECTL_CONTEXT, ZSH_KUBECTL_NAMESPACE,ZSH_KUBECTL_PROMPT and ZSH_KUBECTL_USER variables you can use to customize your prompt.
• kubectl - ZSH plugin for managing kubectl.
• kubectlenv - Easily switch between multiple kubectl versions.
• kubectx (ptavares) - Installs and loads kubectx.
• kubectx (unixorn) - Automatically installs kubectx and kubens.
• kubernetes - Add kubernetes helper functions and aliases.
• lacrimae - Prints a line from a collection of chants.
• lando (joshuabedford) - A collection of alias functions to enable the use of the CLIs within Lando without having to type lando to access them.
• lando (mannuel) - Adds aliases for various Lando commands.
• laradock-workspace - Provides an interface to Laradock's workspace.
• laravel (baliestri) - Plugin for skiping the php command when running artisan commands and ./sail or ./vendor/bin/sail when running sail commands.
• laravel (crazybooot) - Add shortcuts for Laravel 5, 5.1, 5.2 & 5.3.
• laravel-au - Adds aliases for Laravel 6.
• laravel-sail - Adds shortcuts for sail commands.
• laravelx - Adds some aliases for common Laravel commands.
• last-working-dir-tmux - Keeps track of the last used working directory globally and per tmux session and automatically jumps into it for new shells.
• last-working-directory - Broken out copy of the version in oh-my-zsh. Keeps track of the last used working directory and automatically jumps into it for new shells.
• lazy-load - Lazy load tab completions only when you actually need them.
• lazyload - Lazy load commands and speed up start up time of ZSH.
• learn - Learning collection in MySQL/MariadB to save, query and quiz everything you learn.
• lesaint-git - Replacement git plugin for oh-my-zsh-compatible frameworks.
• lesaint-mvn - Maven plugins for oh-my-zsh.
• liferay - Adds scripts for liferay development.
• linkfile - Add shortcuts to your favorite directories.
• linus-rants - Outputs a random Linus Torvalds rant when opening a terminal.
• listbox - Listbox element for shell.
• llm-suggestions - Type something in English at the prompt, hit a definable key, and it uses LLM to generate a command line for you.
• locate-sublime-projects-cli - Allows searching for Sublime Text projects and opens them in Sublime.
• loremipsum - Generate lorem ipsum text on the command line. Gets its data from lipsum.com.
• ls (twopizza9621536) - Adds some more aliases for ls.
• ls (zpm-zsh) - Colorizes the output of ls.
• lsd (tankeryang) - Replaces ls and tree commands with lsd.
• lsd (wintermi) - Override ls and tree commands with lsd.
• lsd (z-shell) - Replaces ls with lsd.
• lumberjack - Lumberjack is a logging interface for shell scripts.
• lux - ZSH plugin to toggle the light & dark modes of macOS, iTerm 2, Visual Studio Code and other items and applications via the lux command. Highly customizable: included items can be configured by defining variables. Highly extensible: items can be added by defining functions. Includes a macos_is_dark helper function to determine if the macOS dark mode is active for use in theming.
• mac-packaging - A set of common functions used for enterprise Mac packaging with Munki.
• macos (joow) - A ZSH plugin for macOS.
• macos (zshzoo) - ZSH goodies for macOS users.
• macos-theme - Adds the theme command, which toggles between light and dark mode in macOS. Requires lux plugin.
• mage2docker - Makes it easy to work with Docker and Magento 2. Speeds up and simplifies common commands like clean cache, setup upgrade, compile di and much more in Magento 2 on containers.
• magento-2 - Adds m2 function to run magento binary, adds tab completions.
• magic-enter - Make your enter key magical by binding a ZSH command to it.
• manydots-magic - A zle tweak for emulating ...'==../..' etc.
• markedit - Mark files and edit them with autocompletion for existing marks.
• markgate - Allows you to mark directories so you can jump directly to them.
• maven-plugin - A fork of the oh-my-zsh maven plugin.
• media-sync - A plugin to facilitate copying media between two rclone locations.
• mercurial - Extracted from oh-my-zsh so you can use it without the rest of oh-my-zsh.
• mfunc - Allows you to define persistent functions on-the-fly, without the need to add them to your config files. These functions are permanently available until you delete them.
• mise - Plugin for mise (formerly called rtx) a fast polyglot version manager, replacing tools like nvm, nodenv, rbenv, rvm, chruby, pyenv, etc.
• mkarch - ZSH plugin that allows you to create archives using multiple different compression formats.
• mkcd - Allows user to create a directory and if successful, cd into it afterward.
• mode-switch.CLI - A ZSH plugin for switching command line between normal mode and vi mode.
• monorepo-plugin - ZSH plugin for monorepo management.
• monthrename - Renames month names to numbers in filenames.
• more-hooks-for-git - Adds extra hooks for git add, git diff and git status.
• mouse-status - Changes mouse color based on status code, uses libratbag.
• msf - Metasploit handler plugin for starting handlers easily.
• multi-evalcache - Cache multiple eval loads to improve startup time, inspired by mroth/evalcache.
• multi-sshacc - Manages multiple git with different ssh keys per repo.
• mvn-contexts - Allows fast switching between maven configurations.
• mylocation - A plugin to show your current location based on your IP address.
• myservice - Designed to help you manage custom systemd services and Docker containers more conveniently. This plugin provides user-friendly commands to list and check the status of your custom services and Docker containers straight from your command line.
• mysql-colorize - Adds color for mysql tables.
• mysql-login - Adds alias for MySQL with login path.
• mysql - Adds some functions for dealing with mysql.
• n - Auto-switches node versions based on project environment using n.
• namelink - Provides an automatically synchronized mapping of filesystem entries (typically symbolic links) in a set of directories to their counterparts in the named directory hash.
• navi - Plugin for navi.
• navigation-tools - Adds htop-like kill, directory bookmarks browser, a multi-word incremental history searcher and more.
• new-file-from-template - Generates file from template.
• newvwp - Spins up a new WordPress site using Valet.
• nhl-schedule - Retrieves and displays the NHL schedule.
• nice-exit-code - Maps exit status codes to human readable strings.
• nix-shell - Plugin that lets you use ZSH as the default shell in a nix-shell environment.
• nnvm - auto-switches node versions based on .nvmrc. Requires n.
• no-ps2 - When this plugin is used, Enter inserts a newline if the typed command is incomplete. No PS2!
• nobility - An organized colletion of shell modules designed to streamline your pentesting workflow by leveraging shell integrations such as autocompletion and prefilling, optimizing the productivity of your work and liberatating you from the hassle of juggling notes, endless copying and pasting, and tedious command editing.
• node-env-installer - Uses nvm to install new versions and modules for the current project.
• node-path - Automatically adds the npm bin of your current directory to your $PATH.
• node - Srijan Shetty's Node.js plugin for ZSH with caching of nvm completions and autoloading of nvm if present.
• nodenv (c-uo) - Looks for nodenv in your working directory and loads it when found.
• nodenv (jsahlen) - Auto-load nodenv and its completions into the shell.
• nodenv (mattberther) - Installs, updates and loads nodenv. Inspired by zsh-rbenv.
• nodo - This plugin helps you prevent node_modules directories from filling your iCloud storage by un-syncing the directory or can save even more space by removing all node_modules directories within the chosen root directory. This is particularly useful for cleaning up a project that has multiple node_modules trees
• nohup - Add nohup to the current command pressing Ctrl-H.
• noreallyjustfuckingstopalready - macOS users know the pain of trying to figure out what command actually flushes the DNS cache on their version of macOS, and this plugin makes that annoyance go away.
• notenote - Makes it easy to take notes.
• notes (aperezdc) - Inspired by terminal_velocity, it provides a fast interface to create and access a set of Markdown text files inside a directory.
• notes (chipsenkbeil) - Provides a quick notes editing experience in ZSH.
• notify (luismayta) - Notifications for ZSH with auto installation of dependencies and r2d2 sounds.
• notify (marzocchi) - A plugin for ZSH (on macOS and Linux) that posts desktop notifications when a command terminates with a non-zero exit status or when it took more than 30 seconds to complete, if the terminal application is in the background (or the command's terminal tab is inactive).
• npm (trystan2k) - Adds npm aliases. Based on the Oh-My-Zsh npm plugin.
• npm (zfben) - Use n as npm aliases with noglob prefix and more. Based on the Oh-My-Zsh npm plugin.
• npms - Utility powered by fzf for using npm scripts interactively. Requires fzf and jq.
• nvim-appname - Maintain multiple Neovim configurations with NVIM_APPNAME with full tab completion of available flags, available neovim applications, and neovim arguments/flags. Requires neovim v0.9+
• nvim-switcher- Manages switching between nvim distributinons such as Lazyvim, kickstart or a home made configuration.
• nvm-auto-use (jrr997) - Automatically manages your Node.js versions with nvm based on your current directory.
• nvm-auto-use (tomsquest) - Calls nvm use automatically whenever you enter a directory that contains an .nvmrc file with a string telling nvm which node to use.
• nvm-deferred - Defers loading of the nvm oh-my-zsh plugin using zsh-defer to speed up shell startup.
• nvm-lazy - Plugin for lazy loading of oh-my-zsh's *nvm- plugin. It supports lazy-loading nvm for more than one binary/entrypoint, with the defaults being nvm, node and npm.
• nvm - ZSH plugin for installing, updating and loading nvm.
• oath - Manages 2FA authentication 6 digit tokens. It was highly inspired by this article about using oathtool for 2 step verification.
• oclif completion generator - Generates shell completions for commands lacking them.
• oh-my-gpt - Provides an easy-to-use interface for interacting with OpenAI's GPT models directly from your terminal. It allows you to send queries, analyze files, and get AI-powered assistance for various tasks.
• oh-my-matrix - Turn your terminal into the matrix.
• oh-my-posh-manager - Manages the oh-my-posh theme engine, along with providing a default powerline-like theme.
• oh-my-tmux-manager - Lets you easily manage your tmux configurations.
• ollama - Integrates the OLLAMA AI model with fzf to provide intelligent command suggestions based on user input requirements.
• omz-full-autoupdate - Automatically update oh-my-zsh plugins and themes.
• omz-git - Oh-My-ZSH's git plugin re-packaged to be standalone.
• omz-themes-standalone - Gives you the oh-my-zsh themes without requiring everything else that comes with oh-my-zsh
• open-create-projects - Open/Create projects in Jetbrains.
• open-pr - A ZSH plugin to open pull requests from command line.
• openshift-origin - Add a few shortcuts to common openshift origin (oc) actions.
• opera-git-plugin - git aliases.
• opera-gx - Enables starting Opera GX with a specific user profile by using the opgx command followed by the profile's name. The plugin also implements autocompletion for profile names.
• opp - Vim's text-objects-ish for ZSH.
• opt-path - Automatically add ~/opt subpaths to your $PATH.
• osx-autoproxy - Configures proxy environment variables based on macOS's system preferences.
• osx-dev - This plugin adds some commands for maintaining various server programs on a macOS install.
• osx - Add some common macOS related aliases and functions.
• paci - Plugin for arch linux package managers.
• pack - Pack your source code with ZSH.
• package-any-node - Easy installing of any Node modules inside the plugin directory, exposing their binaries via shims (i.e.: forwarder scripts) created automatically by Bin-Gem-Node annex.
• packer - Adds aliases and auto-completes for Hashicorp packer.
• pantheon-terminal-notify - Background notifications for long running commands. Supports Elementary OS Freya.
• passwordless-history - Keeps passwords from entering your command line history.
• path-ethic - Helps manage your $PATH quickly and easily. Doesn't touch your existing .zshrc, .zprofile, but adds on top of your existing environment instead.
• pctl - Toggle the environment variables for proxying.
• peco-history - Search shell history with Peco when pressing ctrl+R.
• penmux - A session manager plugin meant to be used for penetration testing sessions and tracking the terminal sessions to be used in reports.
• pentest - Aliases and functions for the lazy penetration tester.
• per-directory-history - Per directory history for ZSH, as well as global history, and the ability to toggle between them with ^G.
• percol - Interactively and incrementally search history/resume background jobs using percol.
• perlbrew - Installs perlbrew if not already installed and initializes it for your shell.
• pew - Sets up and manages Python virtualenvs using pew, automatically switches virtualenvs as you move directories.
• pg - Adds utility functions to work with PostgreSQL.
• ph-marks - Bookmark pornhub videos from your terminal.
• php-version-rcfile-switcher - Automatically switch between php versions using php-version if an rc-file is present in a directory.
• php-version-switcher - Changes php versions if a .php-version file is found.
• phpcs - Plugin for PHP code sniffer.
• phpunit - Plugin for PHPUnit.
• pins - ZSH plugin for pinning directories. Like a CLI folder bookmark manager with tab completions.
• pip-app - Makes it easy to install python applications into distinct Python virtualenvs so they don't conflict with any other python requirements on your system.
• pip-env - Automatic pipenv activation upon entry into a pipenv project.
• pipe - Includes docker and package-related scripts.
• pipenv (owenstranathan) - Automatically activates a pipenv when entering a directory if there is Pipfile in that directory. Includes pipenv completions.
• pipenv (sudosubin) - Enables pipenv's $PATH and adds completions.
• pipx - Autocompletions for pipx.
• pkenv - Installs and loads pkenv.
• plenv - Plugin for the perl plenv version manager based on jenv.
• plugin-ibtool - Adds ibtool shortcuts to generate localized XIB files.
• plugin-rails - ZSH plugin for Rails.
• plugin-vscode - Plugin for Visual Studio Code, a text editor for macOS, Windows, and Linux.
• plugin - Creates custom oh-my-zsh plugins from a boilerplate template. Very oh-my-zsh centric, the generated plugins will need editing to work with other frameworks.
• pnpm (baliestri) - Adds useful aliases for many common pnpm commands. Includes tab-completions.
• pnpm (leizhenpeng) - Adds useful aliases for common pnpm commands.
• pnpm (mat2ja) - Better pnpm aliases.
• pnpm (ntnyq) - Adds useful aliases for common pnpm commands.
• poetry (darvid) - Automatically activates and deactivates Poetry-created python virtualenvs.
• poetry (sudosabin) - Enables poetry $PATH and autocompletions.
• popman - Ever found yourself in the middle of composing a long command and needing to check a man page? Popman lets you instantly pop open a man page for any command you're typing and jump right back to where you left off, making your command-line experience smoother and more efficient.
• portal - A very basic script for jumping to/from paths without having to do write the whole path, open multiple terminal sessions or do a file system search using fzf. Heavily inspired by Z.
• posh-git-bash - Adds git status in your prompt.
• ppsmon - Reads /sys/class/net/$interface/ to keep track of packet transmission rates. It stores the current rate to a file in the RAM backed filesystem where it can be easily accessed for display in a shell-prompt. Linux-only due to use of /sys.
• pr-cwd - Creates a global variable with current working directory. Plugin has integration with jocelynmallon/zshmarks.
• pr-eol - Displays an EOL symbol which can be embedded in the prompt.
• pr-exec-time - Adds a variable you can use to display the execution time of the last command run.
• pr-git - Creates a global variable with git status information that can be displayed in prompts.
• pr-is-root - Sets an environment variable you can use in a custom prompt when running as root.
• pr-jobs - Creates an environment variable which can be used to display background job information in a custom prompt.
• pr-node - Sets an environment variable which can be used to display Node.js information in a custom prompt.
• pr-return - Plugin for ZSH which displays the exit status of the last command run.
• pr-user - Creates a global variable that can be used in prompts.
• presenter-mode - Expands aliases during presentations. It also increases the terminal window's contrast to enhance visibility.
• pretty-time (sindresorhus) - Convert seconds to a human readable string: 165392 → 1d 21h 56m 32s.
• pretty-time (zpm-zsh) - Converts raw seconds into human-readable strings.
• prettyping - Adds a wrapper around the standard ping tool with the objective of making the output prettier, more colorful, more compact, and easier to read.
• prezto-last-working-dir - Keeps track of the last used working directory and automatically jumps into it for new shells, unless the starting directory is not $HOME. Includes a lwd alias.
• print-alias - Prints commands with aliases expanded whenever you use an alias at the command line.
• printc - Allows you to print in any color in the RGB space via a simple printc call.
• printdocker - Pretty print docker objects.
• profile-secrets - Securely keep sensitive variables (api tokens, passwords, etc) as part of your terminal init files. Uses gpg to encrypt/decrypt the file with your secrets.
• project (gko) - Create node/python/ruby projects both locally and on GitHub (private or public repository).
• project (voronkovich) - Plugin for managing projects.
• projen - Adds aliases for projen.
• prompt-dir-perms - Creates a segment displaying the permissions of the current directory you can use in your ZSH prompt.
• prompt-generator - Generates custom themes. Some generated themes require powerline-compatible fonts.
• proxy-plugin - Quickly enable and disable proxy shell environment settings.
• proxy - Configure proxy settings for some package managers and software.
• psgrep - Makes ps grep hide its own process from the results of a ps aux | grep.
• purge-history-secrets - Uses gitleaks to periodically scan your ZSH history for secrets and purge them if found. Requires jq.
• pwp - Provides a convenient way to display the present working path in the terminal prompt and lists the current working directory along with its parent directories. Additionally, it includes a custom command .. to navigate to parent directories easily.
• pyenv (mattberther) - Inspired by zsh-rbenv. Installs, updates or loads pyenv, and adds extra functionality.
• pyenv (twopizza9621536) - Based on the oh-my-zsh pyenv plugin with modifications from the rbenv and jenv plugins.
• pyenv (xlshiz) - Loads pyenv into the current shell and provides prompt info via the pyenv_prompt_info function. Also loads pyenv-virtualenv if available.
• pyenv-lazy-load - Plugin for lazy-loading pyenv in ZSH.
• pyenv-lazy - Lazy load pyenv. The initial eval "$(pyenv init -)" is executed the first time pyenv is called.
• pyvenv-fast - Launch a Python venv with one command. Designed for use with dotpyvenv.
• q (cal2195) - Add vim-like macro registers to your ZSH shell.
• q (tomsquest) - Tail/remove the temp file for Q, the Dirty Debugging Tool.
• qiime2 - Adds functions and aliases to make working with Quiime 2 easier.
• quiet-accept-zle - Enables you to run typed zsh command without triggering new prompt, history entry, or having output being outputed.
• quoter - Display a random quote when opening a new terminal session.
• quotify - Displays inspiring coding quotes from our pairs when starting up.
• qwy - ZSH fuzzy completion plugin.
• randeme - Chooses a random theme for each session. If you not like the chosen theme you can run randeme_rm to never show that theme again.
• random-quotes - Displays random quotes or facts.
• ranger (niziL) - provide prompt element for ranger. Shows current RANGER_LEVEL, displaying nothing when the environment variable is unset, something when it is equals to 1, and something else when it is greater than 1.
• ranger (rc2dev) - Integrates zsh-z into ranger.
• ranger-autojump - Adds autojump support to the ranger console file manager.
• raspberryPi4Temperature - Puts the Raspberry Pi temperature into a spaceship prompt segment
• razer-status-code - Change the colour of your Razer Mouse based on the status of the last executed command. Requires OpenRazer linux drivers.
• rbenv (elliottcable) - A faster fork of the rbenv plugin from oh-my-zsh.
• rbenv (jsahlen) - Variant based on the original oh-my-zsh rbenv plugin.
• rbenv (meroje) - Inspired by https://github.com/lukechilds/zsh-nvm/, makes it easier to work with ruby rbenv environments.
• rc-files - Adds shortcut functions for editing various rc files.
• recall - Makes using command history easier.
• redis - Will run redis-server pointing it to the redis.conf configuration file. This can be used with the zdharma/zredis plugin to share variables between shells.
• redo - Adds an interactive history menu to replace Ctrl-R and ESC+/.
• reentry-hook - Plugin that re-enters working directory if it has been removed and re-created.
• reload - Adds function to quickly reload your .zshrc.
• reminder - A plugin which displays reminders above every prompt.
• replace-multiple-dots - Converts ... to ../..
• require - Adds ability to require commandname and then (if brew is installed) automatically brew install commandname if it isn't already installed.
• revolver - A progress spinner for ZSH scripts.
• riddle-me - Displays random riddles.
• ripz - Reminds you of your aliases, so you use them more. Depends on ripgrep.
• robo - A ZSH plugin for Robo.
• rockz - Lua + LuaRocks virtual environment manager based upon VirtualZ.
• ros2-env - Manage ROS 2 environment and workspaces.
• rose-pine-man - Colorizes man pages.
• run-scripts - Runs scripts from package.json.
• rust (cowboyd) - Configure your rust toolchain, installing rustup if it is not currently installed already.
• rust (wintermi) - Plugin for the rust toolchain.
• rvm - Initiates rvm and adds rubygem binaries (like compass) accessible in the user's $PATH.
• safe-kubectl - Add some safety when running kubectl by warning what context you're in after a definable number of seconds since the last kubectl command.
• safe-paste - A safe-paste plugin. See Conrad Irwin's bracketed-paste blog post.
• safe-rm - Add safe-rm functionality so that rm will put files in your OS' trash instead of permanently deleting them.
• sail - Adds convenience aliases for sail.
• saml2aws-auto - When using multiple AWS profiles, e.g. different accounts for your stages (development, pre-prod, prod), can be used to determine which profile is currently exported and if the token is still valid.
• saml2aws - Add support for saml2aws.
• sandboxd - Speed up your .zshrc & shell startup with lazy-loading by only running setup commands (e.g. eval "$(rbenv init -)", etc) when you need them.
• saneopt - Sane defaults for ZSH options, in the spirit of vim-sensible.
• sb-upgrade - Script to automatically update apps on a seedbox.
• schroot - Show current chroot name in your prompt.
• sdkman - Installs sdkman and adds completions and aliases for it.
• sealion - Allows you to set reminders that will appear in your terminal when your prompt is refreshed.
• search-directory-history - Allows complex search of per-directory history created using the per-directory-history plugin.
• sed-sub - Adds keybindings to do global search and replace on current command line.
• select-history-skim Rummage through your history with skim.
• select-with-lf - Lets user select files or a directory using lf.
• select - Multi-term searched selection list with approximate matching and uniq mode.
• selector - Make it easy to create selection menus.
• send - Single command to git add, git commit, and git push for much faster git workflow.
• sensei-git - Adds many git aliases and helper shell functions.
• senv - Report presence of sensitive environment variables in the prompt
• session-sauce - An fzf interface for tmux session creation and management for all your projects.
• setenv - Runs a script when you change directories.
• setpath - Adds some local paths to your fpath and $PATH.
• shelf - Utility which can be used to bookmark and access directly any file using mnemonics.
• shell-fns - Includes git, neovim, npm, pip extended functionality.
• shellcolor - Changes the terminal background color based on the presence of a .shellcolor in the current directory.
• shellfirm - Shellfirm is a handy utility to help avoid running dangerous commands without an extra step of approval. When risky patterns is detected you will immediately get a small prompt challenge that will verify your action.
• shift-select - Emacs shift-select mode for ZSH - select text in the command line using Shift, as in many text editors, browsers and other GUI programs.
• shortcuts - Enhance your terminal productivity with the Shortcuts plugin for oh-my-zsh. Easily manage command shortcuts with robust features.
• show-git-user - When you need to work with multiple git users on the same machine this plugin will show which git user name is active in your prompt.
• show-path - Provides a function shows the $PATH line by line.
• simpleserver - Plugin to easily start python SimpleHTTPServer and SimpleHTTPSServer.
• singularityenv - Provides a singularityenv_prompt_info function which returns the current singularity environment name
• skaffold - ZSH integration and completions for skaffold local kubernetes development environment.
• skim (casonadams) - Tries to determine where skim is installed, then enables its fuzzy auto-completion and key bindings.
• skim (hackerchai) - Adds support for skim
• slugify - Converts filenames and directories to a web friendly format.
• smart-cd - Runs ls and git status after chpwd.
• smartcache - Caches command output to speed up shell startup time.
• smartinput - When you type brackets or quotes, the corresponding end brackets/quotes are automatically added.
• smile - Adds function to display random smileys.
• snippets - Command line snippet expansion.
• snr - Passes the selected output of the first command to the next.
• solarized-man - A modified version of oh-my-zsh's plugin colored-man-pages, optimized for the solarized dark theme in the terminal.
• spaceship-ocm - Queries your OpenShift Cluster Manager (ocm) configuration to show which environment you're connected to. Requires NerdFont in your terminal.
• spack - Includes some useful aliases and functions for loading/unloading Spack-generated modules. As it makes use of the module command it is much more efficient than spack load.
• ssh-connect - A simple ssh manager.
• ssh-plugin - Plugin for ssh.
• ssh-quickconnect - Simple utility to quickly connect to hosts from your ssh config & known_hosts file.
• sshukh - Will update your known_hosts file when you ssh into a server.
• startify - Shows recently used vim files, shell-util files, active tmux sessions, recently-run git commands and more.
• startup-timer - Print the time it takes for the shell to start up.
• stashy - Plugin that simplifies using git stash.
• statify - Plugin that does basic statistical analysis.
• sublime - Same as the official Sublime plugin for Oh My Zsh, but this opens files in the current Sublime window, if there is one already open.
• sudo (hcgraf) - The sudo plugin from oh-my-zsh, extracted to a standalone. Toggles sudo before the current/previous command by pressing *ESC-ESC- in emacs-mode or vi-command mode.
• sudo (none9632) - Adds sudo as a prefix to the current command by typing ESC-ESC.
• suffix-alias - Directly open files in the shell using ZSH's suffix aliases.
• sussysh - Based on xiong-chiamiov.
• svn-n-zsh - Rewrite of the stock oh-my-zsh svn plugin.
• switch-git - Easy switching between git repositories. Just type sgr <some part of you repo's name>, press enter and you're there.
• symfony (voronkovich) - ZSH plugin for Symfony.
• syntax-highlighting-filetypes - ZSH syntax highlighting with dircolors in realtime.
• syntax-highlighting - Add syntax highlighting to your ZSH. Make sure you load this before zsh-users/zsh-history-substring-search or they will both break.
• sys-diver - A ZSH plugin for directory change or editor startup with only key operations using widgets without typing commands.
• sysadmin-util - Steve Kemp's collection of tool scripts for sysadmins.
• system-clipboard - Adds key bindings support for ZLE (Zsh Line Editor) clipboard operations for vi emulation keymaps. It works under Linux, macOS and Android (via Termux).
• systemd - Adds many aliases for systemd.
• t32 - Plugin for the Lauterbach Trace32 toolset. It automatically registers fonts and sets all necessary environment variables to run the t32 toolset.
• tab-title (p1r473) - Rename tmux and screen panes and windows.
• tab-title (trystan2k) - Set the terminal tab title according to current directory or running process. Forked from termsupport.zsh.
• tailf - Adds tailf function with prefixed newlines instead of trailing newlines.
• take - Replicates take from oh-my-zsh.
• tasko - Allows you to annotate TaskWarrior tasks.
• telepresence - Add the current Telepresence connection status and context to your ZSH prompt.
• terminal-aliases - Adds convenience aliases for [terraform] [git] and more.
• terminal-app - A plugin for integrating with the new macOS El Capitan Terminal.app features.
• terminal-title - Adds a set-term-title function you can use to title terminal windows.
• terminal-workload-report - A plugin that calculates and displays how many commands have been run via terminal.
• termux - Adds compatibility for Termux.
• terraform (hanjunlee) - Add terraform workspace to prompt.
• terraform (jsporna) - Extends the original oh-my-zsh plugin with aliases and tab completions. Adds workspace (when not default) to prompt.
• terraform (macunha1) - Add convenience aliases for terraform, tab completions and helper function to add your terraform workspace in the prompt.
• terraform (ptavares) - Adds aliases, functions and tab completions. Also installs terraform-docs, tfsec and tflint.
• terraform (thuandt) - Adds convenience aliases for terraform, along with completions for terraform and terragrunt.
• terragrunt - Plugin for Terragrunt, a thin wrapper for Terraform that provides extra tools.
• tfenv - Installs, updates, and loads tfenv inspired by zsh-pyenv
• tfswitch - Installs and loads tfswitch.
• tgenv - Installs and loads tgenv. Includes a function to manually update tgenv.
• tgswitch - Installs and loads tgswitch.
• thefuck - Loads thefuck (a tool which corrects your previous command) with cache support, which reduces the loading time dramatically.
• theia-dev-tools - Convenience functions for working with theia-ide.
• tig - Adds a few advanced bindings for tig and also provides a tig-pick script.
• timewarrior - Adds support for timewarrior, a time-tracking application.
• tinted-shell - Adds a script to allow you to change your shell's default ANSI colors but most importantly, colors 17 to 21 of your shell's 256 colorspace (if supported by your terminal). This script makes it possible to honor the original bright colors of your shell (e.g. bright green is still green and so on) while providing additional base16 colors to applications such as Vim.
• tipz - Displays your alias if you have an alias for the command you just ran, similarly to alias-tips.
• title - Allows you to set a terminal window title.
• titles - Automatic window and tab titles for tmux and xterm-compatible terminals.
• tm - Simplifies creating new tmux sessions, attaching to existing sessions, switching between sessions, and listing active sessions.
• tmux-auto-title - Automatically sets the title of windows/panes as the current foreground command.
• tmux-rename - Rename tmux windows automatically.
• tmux-sessionizer - tmux sessionizer as seen on ThePrimeagen.
• tmux-simple - Simple plugin for using tmux with ZSH.
• tmux-vim-integration - Open files in a running vim (or NeoVim) session, from an adjacent tmux pane.
• tmux-zsh-vim-titles - Create unified terminal titles for tmux, ZSH, and Vim/NVIM, modular.
• tmux - Plugin for tmux.
• tmuxrepl - Simple ZSH plugin to have a R-EP-L tmux session.
• todotxt - Adds aliases for todo.sh.
• toggl - Adds a toggl-week command to display the total working hours tracked on toggl.com
• toggle-command-prefix - Add a widget to toggle a prefix to a command. Binds Alt+s to prefix a command with sudo by default.
• toolbox - Automagically updates homebrew plugins. Allows enabling/disabling notice during startup and alias setup.
• touchplus - Create files with touch including the path.
• traista - Includes git status decorations and color-coded exit status of the last command run. Better with dark terminal themes.
• travis - Opens the Travis CI page for the current repo if one exists.
• tre - Makes using tre easier.
• tsm - Adds a tmux Session Manager.
• tumult - Adds tools for macOS.
• ubuntualiases - Ubuntu 16 aliases.
• ugit - Lets you undo your last git operation.
• uncloudium - Adds helper script to download crx files from the Google Chrome web store.
• undollar - Strips the dollar sign from the beginning of the terminal prompt.
• unique-id - Provides a unique number that identifies a running Zshell session, in its shell variable $ZUID_ID. Besides this unique number, also a unique codename is provided, in shell variable $ZUID_CODENAME. An example use case is to hold logs in files .../mylog-${ZUID_CODENAME}.log, so that two different Zshells will not write to the same file at the same time.
• unix-simple - A command that shows a graphic about the simplicity of unix.
• unraid - Adds convenient aliases and functions for managing your Unraid server directly from the command line.
• unwrap - Allows you to remove a directory without removing the contents - it puts them in the directory's parent directory.
• up (cjayross) - A simple way to navigate up through directories.
• up (peterhurford) - Adds an up command to cd multiple levels up.
• up-dir - Binds ctrl-h to navigating up a directory. This makes it very easy to go up a few directories without having to type any commands.
• update-zsh - Updates custom oh-my-zsh plugins. Only works with the oh-my-zsh framework.
• url-highlighter - A plugin for the ZSH syntax highlighter that turns URLs green if they respond with a "good" status, and red otherwise. Useful for checking URL typos.
• uvenv - Extends the functionality of the original oh-my-zsh venv module.
• vagrant-box-wrapper - A wrapper plugin for vagrant that allows for calling vagrant commands from outside of the box directory. The plugin also ships with a few extra commands that help to manage more than one box, along with custom tab-completion.
• valet - Reads .valetphprc from the project root and will switch to that PHP version automatically.
• vanilli.sh - A lightweight start point of shell configuration.
• vapor - Laravel vapor plugin for ZSH to help you to run vapor from anywhere in the project tree, with auto-completion!
• vcshr - Help vcsh users require GitHub repositories using vcsh for auto-installation in ~/.zshrc, etc.
• velocity - Powerline-based theme elements for ZSH and tmux.
• venv-lite - A super-lightweight sort-of-clone of virtualenvwrapper; it pretty much expects you to be using pyenv (though you don't *have- to), and because it's based on the venv module, (creation) only works for python >= 3.3.
• venv-wrapper - Provides ZSH functions to ease the management of your virtual environments using venv.
• venv - Run 'source venv/bin/activate' automatically every time there's a path venv/bin/activate file in the directory.
• vi-increment - Add vim-like increment/decrement operations.
• vi-mode (jeffreytse) - 💻 A better and friendly vi(vim) mode plugin for ZSH.
• vi-mode (nyquase) - Add extra vi-like functionality.
• vi-mode (sinetoami) - Add more vi-like functionality to ZSH.
• vi-motions - Add new motions and text objects including quoted/bracketed text and commands.
• vi-quote - Add an operation which quotes or unquotes a motion.
• viexchange - A vi mode plugin for easily swapping text between two places in the buffer, like vim-exchange.
• vim-mode - Friendly vi-mode bindings, adding basic Emacs keys, incremental search, mode indicators and more.
• vim-plugin - Allows you to do vim filename:123 to open a file with the cursor at a specific line.
• vimman - View vim plugin manuals (help) like man in ZSH.
• vimto - Improved ZSH vi mode (bindkey -v) plugin.
• virtualenv-mod - A modified virtualenv ZSH plugin for oh-my-zsh.
• virtualenv-prompt - A fork of the virtualenv plugin from upstream oh-my-zsh. Adds support for customizing the virtualenv prompt in oh-my-zsh themes.
• virtualz - Python virtualenv manager inspired by Adam Brenecki's Virtualfish for the Fish shell, replaces virtualenvwrapper.
• virtuozzo-plugin - An oh-my-zsh plugin for the virtuozzo bare-metal virtualization system.
• visit - Custom plugin for faster navigation.
• vivid - Make it easier to use LSCOLORS with vivid.
• volta (cowboyd) - Seamlessly install and configure the Volta Node.js toolchain manager.
• volta - Installs and loads Volta: JS Toolchains as Code.
• vox - An oh-my-zsh plugin to control VOX, a lightweight full-featured audio player for macOS that can play a variety of formats including FLAC and Ogg Vorbis.
• vsc - Plugin for Visual Studio Code on macOS.
• vscode (kasperhesthaven) - Simple plugin to open Visual Studio Code a little more easily across systems.
• vscode (qianxinfeng) - Plugin for Visual Studio Code.
• vterm - Lets you run emacs commands directly from vterm shell sessions.
• vtex - Adds helper aliases for vtex cli commands.
• wakatime (sobolevn) - Track how much time you have spent in your terminal. Has per project stats.
• wakatime (wbingli) - Automatic time tracking for commands in ZSH using wakatime.
• warhol - Configures colorization with grc.
• watch - Easily prefix your current or previous commands with watch by pressing CTRL + W.
• watson.zsh - A plugin for the watson time management system.
• wd - Warp directory lets you jump to custom directories in ZSH, without using cd. Why? Because cd seems inefficient when the folder is frequently visited or has a long path.
• web-search (anant-mishra1729) - Adds aliases for searching with Google, Bing, Wiki, YouTube, Yahoo, Duck Duck Go, GitHub, Stack Overflow and other services straight from the command line.
• web-search (sinetoami) - Add commands to run bing, google, yahoo, & duckduckgo searches directly from the CLI.
• web-search (yabanahano) - Adds aliases for searching with Google, Wiki, Bing, YouTube and other popular services.
• welcome-banner - Displays a login banner with a random quote.
• westchange - Allows you to quickly change between directories. Requires fzf.
• which-jspm - Adds npm, yarn or pnpm to the end of your prompt depending on what lockfile(s) it detects in the current directory.
• whobrokemycode - Highlight where a particular line was last changed in a file using git blame.
• window-title - Adds informative tiles to your terminal windows.
• windows-title - Dynamically updates terminal window title with current directory and the last command run.
• wordle - Wordle for ZSH, with tab-completions.
• workon - Simple utility for jumping between projects.
• worktree - Adds functions that wrap git worktree.
• wsl - Adds helper functions to make it easier to work in ZSH when running inside WSL.
• wsl2-ssh-pageant - Use your Yubikey stored GPG keys from WSL. This packages the instructions from wsl2-ssh-pageant repo as a ZSH plugin.
• xxh-plugin-zsh-zshrc - plugin for xxh-shell-zsh that copies your ~/.zshrc to a remote host and sources it with xxh-shell-zsh.
• yadm - Displays a warning if there are local yadm configuration changes.
• yapipenv - Automatically activate a directory's pip environment if pipenv detects the presence of one.
• yazi-zoxide - This plugin for zsh adds just one shortcut, but unfolds the magic of both Zoxide and yazi. Without arguments, y just opens yazi. If you supply an argument that is a directory, yazi is opened in that directory. But if you supply anything else as an argument, zoxide is called with the argument and yazi is opened there.
• yeoman - Edouard Lopez's Yeoman plugin for oh-my-zsh, compatible with yeoman version ≥1.0 (includes options and command auto-completion).
• you-should-use - ZSH plugin that reminds you to use those aliases you defined.
• youtube-dl-aliases - Adds yt aliases to download videos from YouTube.
• youtube-dl - Simple plugin for youtube-dl.
• yup - Adds helper function to upgrade all the dependencies in a yarn/npm project.
• z.lua - A command line tool which helps you navigate faster by learning your habits. An alternative to z.sh with Windows and posix shells support and various improvements. 10x faster than fasd and autojump, 3x faster than z.sh.
• zabb - zabb is a command that tries to figure out the shortest memorable abbreviation of a directory that is usable by z to unambiguously jump to that directory.
• zabrze - A ZSH abbreviation expansion plugin.
• zapmarks - Provides quick access to your most used command-line bookmarks. It allows you to save, search, and execute complex commands with ease.
• zautoload - Autoloader for ZSH config files.
• zaw - ZSH anything.el-like widget.
• zbrowse - When doing shell work, it is often the case that echo $variable is invoked multiple times, to check the result of a loop, etc. With ZBrowse, you just need to press Ctrl-B, which invokes the ZBrowse – Zshell variable browser.
• zce - Vim's EasyMotion / Emacs's ace-jump-mode for ZSH.
• zcolors - Uses your $LS_COLORS to generate a coherent theme for Git and your Zsh prompt, completions and ZSH syntax highlighting.
• zconvey - Adds ability to send commands to other ZSH sessions, you can use this to cd $PWD on all active ZSH sessions, for example.
• zed - A simple wrapper for z to install it via a ZSH plugin.
• zellij (jaeheonji) - Provides an environment that uses zellij. Requires tmux. Deprecated by author, now supported natively.
• zellij (tranzystorek-io) - Provides an environment that autostarts zellij as your terminal's multiplexer.
• zeno - Fuzzy completion and utility plugin powered by Deno.
• zenplash - Creates files from templates stored in a user directory.
• zenv - Isolated working shell enviornments per directory (like direnv, but uses a new shell instance to provide cleaner isolation).
• zero - Zero is both a plugin and a theme. See the GitHub page for installation details. Includes git and hg status decorators.
• zeza - Manages and customizes eza, the very colorful ls replacement.
• zflai - A fast logging framework for ZSH.
• zfzf - A fzf-powered file picker for ZSH which allows you to quickly navigate the directory hierarchy.
• zgen-compinit-tweak - Make compinit run only once after all loading is done by zgen.
• zgenom-ext-eval - Zgenom extension for creating plugins inline.
• zhooks - Displays the contents of any ZSH hook arrays and the code of any hook functions that have been defined. Useful for debugging.
• zi-rbenv - Fast rbenv loads if you're using zi.
• zimfw-extras - Custom extras for zimfw, packaged into a zimfw plugin.
• zinfo_line - Makes more information available to ZSH themes.
• zinit-annex-bin-gem-node - zinit extension that exposes binaries without altering $PATH, installs Ruby gems and Node modules and easily exposes their binaries, and updates the gems and modules when the associated plugin or snippet is updated.
• zinit-annex-default-ice - Allows user to define ices active for multiple zinit commands.
• zinit-annex-man - Zinit extension that generates man pages for all plugins and snippets
• zinit-annex-meta-plugins - Install groups of plugins with a single label (zinit only).
• zinit-annex-patch-dl - zinit extension that downloads files and applies patches through the provided dl and patch zinit ices.
• zinit-annex-readurl - Adds function to automatically download the newest version of a file to which URL is hosted on a webpage.
• zinit-annex-rust - zinit extension that that installs rust and cargo packages inside plugin directories.
• zinit-annex-submods - zinit extension that allows installing and managing additional submodules within a plugin or snippet.
• zinit-annex-test - zinit extension that runs tests (via make test, for example) – if it finds any of them – after installing and updating a plugin or snippet.
• zinit-annex-unscope - Allows installing plugins for zinit without specifying the user name by querying the Github API.
• zinit-console - A semigraphical (curses) consolette for the zinit plugin manager.
• zinsults - Prints insults if a command fails.
• zjump - Simplify ZSH directory navigation; jump to already visited, parent or sub folders.
• zlitefetch - Lightweight system information plugin.
• zload - Hot Reload for ZSH functions. Enables rapid development.
• zlong_alert - Uses notify-send and rings a bell to alert you when a command that has taken a long time (default: 15 seconds) has completed.
• zman - Use fzf to quickly browse ZSH manuals.
• znotify - A simple plugin for sending notifications to other services.
• znvm - A Node.js version manager for ZSH similar to nvm.sh but faster.
• zoxide - A fast alternative to cd that learns your habits.
• zplug-blame - A zplug-specific plugin that displays how long each of your plugins took to load.
• zpy - Manage Python Environments, dependencies, and isolated app installations, with a ZSH frontend to pip-tools.
• zredis-cmd - Utilizes variable sharing done by zredis plugin to implement remote command execution.
• zredis - Adds Redis database support, with database_key <-> shell_variable binding. Supports all data types.
• zservice-py3http - Serve a given directory with Python 3's http server from the standard library.
• zsh-expand - Expands regular aliases, global aliases and incorrect spellings and phrases with the spacebar key. Native expansions such as globs, command/process substitution, =command expansion, history expansion and $parameters are also expanded by default but can be turned off.
• zsh-in-docker - Automates ZSH + oh-my-zsh installation into development containers. Works with Alpine, Ubuntu, Debian, CentOS or Amazon Linux.
• zsh-not-vim - Provides a function that automatically shames the user for forgetting they weren't in vim.
• zsh-select - Displays a selection list. It is similar to selecta, but uses the curses library to do display, and when compared to fzf, the main difference is approximate matching instead of fuzzy matching.
• zsh-watch - Simple watch that supports alias and completion.
• zsh-z (agkozak) - Jump quickly to directories that you have visited "frecently." A native ZSH port of z.sh - without awk, sed, sort, or date.
• zsh-z (ptavares) - Installs and loads z.
• zshange_directory_recent - Change to a recent directory. Requires fzf.
• zshmarks - A port of Bashmarks (by Todd Werth), a simple command line bookmarking plugin, for oh-my-zsh.
• zshrc-sync - Detects changes to .zshrc and pushes them to github when zsh exits.
• zshrc - Load local .zshrc files from your project scopes.
• zshrpg - A wrapper that fully integrates rpg-cli with ZSH!
• zsnapac - Plugin for taking ZFS pre/post upgrade snapshots on Arch Linux.
• zsnapshot - Adds command to dump the current ZSH state into a file, for later restoration by sourcing the snapshot file.
• ztouch - Adds touchbar controls for recent history commands, directory stack, cycling between modes and user-mappable commands to the touchbar on macOS.
• ztrace - Catches output of commands, allows to reuse that output, glue it with history content.
• zui - ZSH User Interface library – CGI+DHTML-like rapid TUI application development with ZSH.)
• zypper-short - Plugin for OpenSuse Tumbleweed's package manager, zypper.

Completions

These plugins add tab completions without adding extra functions or aliases.

• 1password-op - Loads autocompletions for 1Password's op command line tool.
• _url-httplink - Extends ZSH's _urls completion, allowing it to complete urls from html pages.
• aircrack - Adds completions for airbase-ng, aircrack-ng, airdecap-ng, airdecloak-ng, aireplay-ng, airmon-ng, airodump-ng, airolib-ng, airserv-ng, airtun-ng, airventriloquist-ng.
• aliyun - Add completions for the Aliyun CLI.
• ansible-server - Completions for viasite-ansible/ansible-server.
• antibody - This plugin provides completion for the Antibody plugin manager.
• appspec - Generating completions for Bash and ZSH from YAML specs
• argc-completions - Uses argc and jq to add ZSH tab completions.
• audogombleed.sh - Makes it easy to generate completion files using a declarative syntax, quickly and without coding.
• autopkg-zsh-completion - Completions for autopkg.
• autorestic - automatically installs Restic's completions for you, and keeps them up to date as your autorestic version changes.
• aws-completions - Adds completion support for awscli to manage AWS profiles/regions and display them in the prompt.
• aws_manager completions - Add completions for the aws_manager CLI.
• bash-completions-fallback - Support bash completions for commands when no native ZSH one is available.
• batect - Adds tab completions for batect build system.
• berkshelf-completions - Adds tab completion for berkshelf.
• better-npm-completion - Better tab completion for npm.
• bio - Completions for bioinformatics tools.
• bitbake - Completions for bitbake.
• bosh (krujos) - Adds BOSH autocompletion.
• bosh (thomasmitchell) - Tab completion for BOSH].
• brew-completions - Brings Homebrew Shell Completion under the control of ZSH & ZI.
• brew-services - Completion plugin for homebrew services.
• buidler - Adds completion and useful aliases for NomicLabs Buidler tool.
• bw - Adds completion for Bitwarden.
• cabal (d12frosted) - Adds autocompletion for cabal.
• cabal (ehamberg) - Add tab completion for cabal.
• carapace-bin - Multi-shell multi-command argument completer.
• carapace - Completion generator for Bash, Elvish, Fish, Oil, Powershell, Xonsh and ZSH. Note - this does not automatically generate completions as needed, you have to explicitly run it to generate completions for a command.
• cargo - All the functionality of the original oh-my-zsh cargo completion, with additional support for remote crates via cargo search in cargo add.
• carthage - Provides completions and aliases for use with Carthage.
• cf-zsh-autocomplete - Adds autocomplete for all Cloud Foundry CLI commands.
• chezmoi - Adds completions and aliases for chezmoi. Detects if you have git aliases and generates chezmoi aliases for them.
• click-completion - Add automatic completion support for Click, including displaying the options and commands help during the tab completion.
• cod - A completion demon for bash/fish/zsh which creates completion functions on the fly when it sees you run something with --help.
• codeception - Adds command completion for the Codeception Testing Framework.
• comonicon - Tab completions for comonicon.
• complete-lastf - Adds a tab completion to select the most recently modified file or directory.
• complete-mac - Add completions for macOS ioreg, lsmp, scselect, system_profiler and tmutil commands.
• completion-sync - Automatically loads completions added dynamically to FPATH or XDG_DATA_DIRS.
• completions (clarketm) - This includes the zsh-userscompletions, zchee's completions, nilsonholger's osx-zsh-completions and various other custom completions.
• completions (zchee) - Yet another collection of tab completions.
• completions (zsh-users) - A collection of extra completions for ZSH.
• conda - ZSH tab completion for conda.
• cpan - Adds cpan install word<tab> and cpanm install <tab> to complete remote CPAN package names.
• crazy-complete - Every program should have autocompletion in the shell to enhance user experience and productivity. crazy-complete helps solve this task by generating robust and reliable autocompletion scripts.
• cross-compiler - In cross compilations, there are many tools like x86_64-w64-mingw32-gcc, x86_64-linux-android32-clang, arm-none-eabi-gcc, etc. This plugin provides ZSH completions for them.
• ctop - Tab completions for ctop.
• dagger - Completions for dagger.
• dbic - Automatically sets up Environment variables for DBIx::Class::Migration's script and Dancer.
• ddc - Adds tab completions for ddc.
• deno - Tab completions for deno.
• docker (chr-fritz) - Loads docker ZSH tab completions directly from Docker for Mac.
• docker (felixr) - Add tab completions for docker.
• docker (greymd) - Add tab completions for docker and docker-compose.
• dotnet - Dotnet tab completion.
• dropbox - A dropbox plugin for Zsh that provides dropbox-cli and dropbox-uploader commands.
• drush_zsh_completion - Drush autocomplete awesomeness for ZSH.
• duell - A ZSH plugin for duell.
• efibootmgr - Tab completions for efibootmgr.
• elm - Tab completion for elm.
• etcdctl - Adds etcdctl tab completions.
• expressvpn - Adds tab completions for the expressVPN client.
• extract (le0me55i) - Defines a function called extract that extracts the archive file you pass it, and supports a wide variety of archive filetypes.
• extract (thetic) - Fork of the oh-my-zsh extract plugin.
• fancy-completions - Provides various completions tools, libraries and integrations.
• flatpak - Tab completions for Flatpak.
• fluxcd - Adds tab completion for the FluxCD command line tool, as well as some aliases for the most common flux commands.
• fly-zsh-autocomplete - Adds autocompletion options for all Concourse CLI commands.
• fnm - Adds tab completions for Fast Node Manager fnm.
• fvm - Adds tab completions for the Flutter Version Manager (FVM).
• fzf-gcloud - Fuzzy completion to navigate and preview all Google Cloud SDK gcloud CLI commands
• fzf-tab-completion - Add tab completion for ZSH, bash & applications using GNU Readline.
• fzf-zsh-completions - Fuzzy completions for fzf and ZSH that can be triggered by a trigger sequence that defaults to **.
• fzshell - Fetches fuzzy completions from sources predefined by a user.
• gardenctl - Tab completions for the Gardener command-line interface, as well as some aliases for common gardenctl commands
• gcloud (littleq0903) - Add completions for the Google Cloud SDK.
• gcloud (wintermi) - Adds Google Cloud Command Line Interface (gcloud CLI) completions.
• gentoo - Provides ZSH completion support to various Gentoo tools that lack completion scripts upstream.
• git-annex - Allows tab completion for most git-annex commands.
• git-flow - ZSH completion support for git-flow.
• git-fzf - ZSH plugin that wraps git operations for simplicity and productivity. It also contains completions and combines support for fzf.
• git-profiles - Manages multiple git users in a single .gitconfig file.
• git-recent-branches - Makes it easy to check view and checkout recently checked-out branches.
• github-cli - Tab completions for the GitHub cli.
• gitlab-runner - ZSH completions for gitlab-ci-multi-runner.
• gradle-completion (gradle) - Bash and ZSH completion support for gradle.
• gradle-completion (ninrod) - ZSH completion support for gradle.
• grid5000 - Grid 5000 plugin - adds theme, autocompletions.
• gstreamer - Tab completion for GStreamer.
• gulp (akoenig) - Autocompletion for your gulp.js tasks in the Z-Shell (ZSH).
• gulp (srijanshetty) - Autocompletion for gulp.
• hashlink - Completions for https://hashlink.haxe.org/.
• haskell - Adds completions for cabal, ghc and ghc-pkgs commands.
• haxelib - Completions for haxelib.
• helmfile - Adds autocompletion for helm.
• inshellisense - Provides IDE style autocomplete for shells. It's a terminal native runtime for autocomplete which has support for 600+ command line tools. inshellisense supports bash, fish, zsh and pwsh on the Windows, Linux, & MacOS operating systems.
• ipfs - Completions for the Interplanetary File System.
• jenv - Tab completions for jEnv.
• joe - Adds completions for joe gitignore editor.
• jtool-completion - ZSH completions for jtool.
• jx - Adds tab completions for the Jenkins-X cli.
• kafka - Completions for Apache kafka.
• keybase - Completions for keybase.
• kind- Loads tab completions for kind.
• kitty - Completions for kitty terminal emulator.
• kompose - Add tab completions for Kompose.
• kubeadm - Add tab completions for kubeadm.
• kubectl (chrishrb) - Automatically loads completions for kubectl.
• kubectl-fzf - Fast and powerful fzf-powered autocompletion for kubectl.
• kubectl-plugin - Generates kubectl completion scripts to extend the kubectl auto complete functionality to accomodate for plugin sub-commands.
• kustomize - Adds tab completions for kustomize
• lazycomplete - Lazy loading for shell completion scripts.
• lets-cli - Add autocompletion for lets cli task runner.
• ls-go - Adds some useful aliases for ls-go.
• mac - Completions files for macOS specific commands and third party tools.
• mcfly - Replaces your default ctrl-r shell history search with an intelligent search engine that takes into account your working directory and the context of recently executed commands. McFly's suggestions are prioritized in real time with a small neural network.
• mill - Tab completions for Scala's Mill build tool.
• miniconda - Tab completions for miniconda.
• misc-completions - Adds completions for more unix and perl commands.
• mooseX-App - completion generator for Perl module MooseX::App.
• more-completions - 10500 ZSH compsys completions!
• msfvenom - Tab completions for Metasploit.
• mx-honey - Provides completions for mx; a command-line tool used for the development of Graal projects. It's meant to improve the usual workflow build unittest benchmark ... ease discovery and provide handy aliases.
• myincr - Speeds up pasting with autosuggest and incr.
• newman - Provides autocompletion for the Newman CLI.
• ngrok - Auto-loads ngrok and its completions into the shell.
• nix - Completions for nix, NixOS, and NixOps.
• node-ace - Completions for node ace.
• nova - Provides auto-complete for nova.
• npm-run - Autocompletion support for npm run.
• npm-scripts-autocomplete - Shows autocomplete suggestions from scripts found in the current directory's package.json. Works with npm and yarn.
• nx - Completions for nx. Requires jq.
• oh-my-update - Updates plugins in oh-my-zsh.
• okta - Provides command line completions for the aws-okta and okta-awscli commands.
• ollama - Tab command completion for Ollama AI models management.
• op - Tab completions for 1Password's op command line tool.
• openstack - Add functions and aliases for managing OpenStack.
• osx-zsh-completions - Tab completions for some macOS-specific commands like launchctl.
• packer - Adds tab completion for packer.
• pagerduty - Adds completions for the pagerduty cli
• pandoc-completion - Pandoc completion plugin.
• parallels - Add completions for Parallels desktop.
• pass-zsh-completion - convenience repo to easily obtain pass command completion for ZSH.
• pip-completion - Autocompletion plugin for pip.
• pipenv (AlexGascon) - Enables aliases for the most common pipenv commands.
• pipenv (gangleri) - Completions for pipenv.
• pmy - General purpose context-aware ZSH completion engine powered by fzf.
• poetry - Tab completions for poetry.
• prettier - Tab completion for prettier
• quickjump - Adds tab completion support for skim for recent files and directories using fasd.
• racket completion - Completion for Racket.
• rake-completion - Add fast tab completion for rakefile targets.
• rancher - Add completions for the Rancher CLI.
• rhoas - Adds completions for rhoas.
• rustup - Tab completions for Rustup.
• s3cmd - Adds tab completions for s3cmd.
• salesforce-cli - ZSH command completion for the Salesforce CLI. Requires jq.
• saml2aws - Adds completions for saml2aws.
• sfdx-autocomplete - Autocomplete plugin for Salesforce sfdx.
• speedtest - Tab completions for the speedtest cli.
• spring-boot-plugin - Adds autocompletions for spring-boot commands.
• ssh (sunlei) - Better host completion for ssh.
• ssh (zpm-zsh) - Add host completion for ssh.
• ssh-agent (bobsoppe) - Manage ssh-agent.
• ssh-agent (hkupty) - Automatically starts ssh-agent to set up and load whichever credentials you want for ssh connections.
• ssh-agent (twfksh) - A bloat free utility plugin for managing ssh-agent in ZSH. This plugin automatically starts and manages ssh-agent whenever a new ternimal session starts. After running zsh-ssh-agent, you only need to ssh-add your keys once. The plugin will handle the rest.
• ssh-config-suggestions- Loads completions for ssh from ~/.ssh/config.
• supabase - Tab completions for the supabase cli
• symfony (Akollade) - Adds completions for Symfony, including the bin/console and sf commands.
• symfony-complete - Universal completion for Symfony based CLI applications: composer, php-cs-fix, bin/console, artisan, php-cs-fixer and etc. This supports autocompletion for subcommands and GNU-style options (--help)
• tailscale (heroeslament) - Tab completion and aliases for tailscale.
• tailscale (hsrzq) - Tab completions for tailscale. Only works on macOS.
• talosctl - Tab completion for Talos Linux.
• taskbook - Auto-completes task numbers for taskbook.
• terragrunt - Tab completion for Terragrunt.
• test-kitchen - Add completions for Test Kitchen).
• tinygo - Add tab completions for tinygo.
• tmux pane words - Key bindings to complete words from your tmux pane.
• tofu - Autoloads tab completions for tofu.
• tugboat - Adds autocompletion for tugboat command.
• umake - Tab completion for Ubuntu umake.
• vert.x - Provides autocomplete features for the vertx command.
• vorpal - Adds completions for some projects whose upstream appears dead, including duperemove, optimus-manager and pacutils.
• web-open - Adds alias to open web pages. Only works with Ubuntu 20.
• web-search - Runs a search in the specified search engine in your default browser.
• wsl-notify - Uses wsl-notify-send to notify when a command takes longer than 15 seconds. Windows-only.
• xcode - Completions for some Xcode command line tools - genstrings, nm, plutil, xcode-select, xcodebuild, xcrun, simctl, strings, swift-demangle, swift and lipo.
• yabai - Add completions for macOS yabai tiling window manager.
• yarn-extra-completion - Inspired by lukechilds/zsh-better-npm-completion.
• yarn - Add autocompletions for yarn add, yarn remove, yarn upgrade, yarn why and yarn run.
• yt-dlp - Tab completions for yt-dlp.
• zargparse - Pass it a script that uses argparse and it will write a ZSH completion to your current directory.
• zoxide - Tab completions for zoxide.
• zpacman - Add tab completions for zpacman.

Themes

If you're using Antigen, you can test these themes in a running ZSH with antigen theme githubuser/repo. If you're using zgenom, add them to your init.zsh with zgenom load githubuser/reponame.

• 021011 - Minimalist. Includes a single git marker for VS Code.
• 0i0 - Optimized for dark terminal windows, uses nerdfont git status decorations.
• 14degree - Includes git, virtualenv and rvm status decorations.
• 1999 - Powerline-esque theme. Includes git status decorations, network and battery status.
• a - Simple theme with current directory and git status decorations.
• abbr (theme) - Displays an abbreviated version of the current directory path, shows the Python virtualenv, Rust version, git status, and the exit code of last command. Works well on dark backgrounds by default but colors can be easily customized.
• abhiyan - Segmented prompt. Includes decorators for git branch, staged file count, unstaged file count & untracked file count, username, current working directory and the time. Requires Powerline-compatible fonts.
• absolute - Very clean looking theme with decorators for git status, node version and the exit code from the last command.
• abzt - No nonsense theme with decorators for git status and directory information. Requires a nerdfont.
• acenoster - A multi-purpose theme with very detailed git and mercurial support. Also includes decorators for AWS profile name, virtual environment name if any, number of background tasks, current directory and previous command's exit code if non-zero.
• achab - Includes decorators for the current folder path, the current user and the current git branch. Decorator colors are easily customizable.
• adamdodev - Includes decorators for git status, the name of your AWS profile, the name of your Azure Service Principal, kubernetes context, terraform workspace, last command exit status and current working directory.
• adlee - macOS theme, requires a Powerline-compatible font.
• af-magic-dynamic - Modified version of af-magic with dynamic path shortening.
• aflah-bhari - Modified version of the robbyrussell theme in oh-my-zsh.
• aftermath - Get a nice summary line after each command you run in your shell.
• agitnoster - Based on agnoster theme included in Oh My Zsh and bash-git-prompt. Shows detailed information about git status.
• agkozak - Uses three asynchronous methods to keep the ZSH prompt responsive while displaying the git status and indicators of SSH connection, exit codes, and vi mode, along with an abbreviated, PROMPT_DIRTRIM-style path. Very customizable. Asynchronous even on Cygwin and MSYS2.
• agnoster (fcamblor) - Solarized Agnoster variant with git status information. Requires a unicode font and works best with a solarized terminal.
• agnoster (fseguin) - agnoster variant with a right prompt.
• agnoster-gentoo - A Gentoo flavored version of the Agnoster ZSH Theme that includes user@hostname and git status decorations. Works better with a unicode font.
• agnoster-j - Optimized for solarized color scheme, git or other VCS tools, and unicode-compatible fonts. Includes decorators for status of last command run, user@hostname, git status, working directory, whether running as root, whether background jobs are running, and other information.
• agnoster-mod - Agnoster variant with a right-prompt.
• agnoster-multiline - Based on Agnoster. Includes decorators for current directory and git status. Requires a font with powerline and git glyphs. Automatically disables non-ascii glyphs on linux ttys.
• agnoster-plus - Agnoster variant optimized for use with Solarized Dark terminal color scheme. Includes git status.
• agnoster-refresh - Agnoster variant, includes battery and online status.
• agnoster-repopath - Based on Agnoster and Passion themes. Includes git and mercurial status, current time and time the last command took decorations in the prompt.
• agnoster-timestamp-newline - Agnoster variant with timestamp and newline added.
• agnoster - Optimized for solarized terminal color schemes, shows git decorations, user@host, working directory, the previous command's exit status and whether you are running with root privileges. Requires a Powerline-compatible font.
• agnosterAfro - Based on Powerline and Agnoster themes and inspired by the agnosterzak.
• agnosterzak - Based on Agnoster, shows battery life, date & time, git status, current directory and user & host information.
• ai-hayasaka - Minimalist theme with git status, ruby env and python virtualenv decorators.
• air - Minimalist theme with git status decorations.
• akzsh - Works best with a dark terminal theme, includes git decorations.
• al-magic - Clone of the oh-my-zsh af-magic theme with the time added at the right of the prompt.
• alarangeiras - Minimalist theme with git status decorations.
• ale - Based on the fino theme. Includes git, virtualenv and node status decorations.
• alesrosina - Includes decorators for git information, current directory and the last command's return status.
• alien-minimal - Minimalist ZSH theme with git status displayed.
• alien - Powerline-esque ZSH theme that shows git decorations and the exit code of the last command. Faster than many other prompts because it determines the git decorations asynchronously in a background process.
• almel - Inspired by agnoster, written in Rust. Includes git status, user@host, last command exit status and working directory decorations
• aloy (garethclews) - Fork of @elenapan's lena theme. Includes magic enter from subnixr's minimal where hitting enter without any further commands prints out some useful ls, git and current working directory information.
• aloy (karetsu) - Fork of @elenapan's lena ZSH theme. extended to give a little more information in it. It also includes the 'magic enter' from subnixr's minimal where hitting enter without any further commands prints out some useful ls, git and current working directory information.
• alp - A simple theme with decorations for current directory, root status, username and host.
• alpha - Includes decorators for username@hostname and current directory.
• alpharized - Optimized to work with solarized dark terminals. It's a modified version of the avit theme.
• amoyly - An elegant and comfortable-reading theme based on Agnoster.
• amplify - Minimalist, includes AWS Amplify envioronment and git status decorations.- andy - Modified bira theme with better git support.
• antoinechab - Includes git status, username, time and current directory decorations.
• antsy - Shows git branch and status decorations, virtualenv, exit status, jobs count, and vi-mode indicator.
• aofxta - Includes decorators for last command's execution time, git information, current directory and current time.
• ap2 - Minimalist them with decortators for time, OS, current directory, git status and the last command's exit status.
• aperiodic - Shows git decorations, user, host, whether root, active Python virtual environment, current Ruby interpreter, visual and numeric status of the last command, power management status and time and date.
• aphrodite - Minimalistic theme without visual noise. Displays only the necessary information: current user, hostname, working directory, git branch if one exists. Looks great both with dark and white terminals.
• aplos - Minimal ZSH prompt with working directory, git local info, git remote info, time and exit code.
• apollo - A heavily customizable, compatible and performant ZSH theme that uses modules to enable features.
• appa - A tidy little theme based on omz's refined. Requires a Nerd Font.
• apple (aramirol) - Based on robbyrussell, includes vcs status decorations. Colors customizable by setting vars in your .zshrc.
• apple (bjrowlett2) - Minimalist theme with git status decorations.
• arael - Fork of gallifrey.
• archcraft - Greenish theme, optimized for dark backgrounds. Includes git status decorations.
• archie - Arch Linux inspired ZSH theme. Based on the norm theme.
• arity - A simple theme designed for readability and to give an overview at a glance. Includes path and git decorations.
• aronhoyer - Minimalist theme with right-side git status decorations.
• arrow-minimal - A minimal ZSH theme with git decorations.
• arrow - Minimal theme, includes git status decorations.
• asciigit - An ASCII-only theme for git users who don't want to use fonts with extra glyphs.
• asq - Based on theunraveler.
• astral (skippyr) - Dual line theme with decorators for user@hostname, current directory, python virtual environment and git information.
• astral (xwmx) - Theme for dark backgrounds with zen mode. Works well with the zsh-users zsh-syntax-highlighting plugin. Includes decorators for execution time of last command, when it was run, its exit status, machine name, current path, ssh status, and git status.
• astro - Based on the ys and robbyrussell themes.
• async - Shows current directory, git state, return value of last command if it had an error code, number of background jobs, execution time of long-running commands, current python virtualenv.
• aterminal - Displays Node.js, NPM, Docker, Go, Python, Elixir and Ruby information in the prompt.
• aub - Includes decorations for git and hg status and username at host.
• australis - Lightweight theme with decorators for git information and current directory. Requires git plugin from oh-my-zsh.
• avil - Minimalist theme with git decorations.
• avit-d2k - Based on the oh-my-zsh avit theme, with small changes.
• avit-mod - Modified version of oh-my-zsh's avit theme.
• avoleo - Features a date and time prompt for each command, as well as a command number in history. In addition, it uses special symbols '⠾' and '⡶' to display git information if applicable in the current path. It also supports custom colors based on the Gnome-Terminal default color palette.
• aws - Based on robbyrussell, with an extra decorator to show your $AWS_PROFILE when it is set.
• backbone - A bare minimum single file prompt, fast as a roadrunner MEEP! MEEP. Includes git status and current directory decorations.
• bahman - Requires Nerd Font. Has git status decorator.
• banana - Includes git status decorations and current directory.
• bandit - Another Powerline variant.
• bar (anki-code) - Minimalist settings for p10k.
• bar (xp-bar) - Includes username, host, pwd, git status decorations and 3x hour reminders to drink water.
• barion - A fast compiled prompt with a compact git status overview. Reminiscent of powerline. Requires Crystal to build.
• bash - Looks like the default bash prompt.
• bashi - Optimized for Ahmet Sülek's Flat UI Terminal theme and Pasquale D'Silva's Saturn Terminal theme.
• bashlover - Designed for those who appreciate the powerful features of ZSH shell but still prefer a simple, classic interface similar to the bash shell. Includes decorators for git information, user@host and the current working directory
• bashplus - Colorized replica of the default bash prompt with decorators for virtualenv and git status.
• bastard - Modified version of gitster theme for ZIM.
• bearable - Works well with dark terminal backgrounds.
• bearings - A fast, clean, super-customizable shell prompt. Includes decorators for current directory, git status, exit code of last command, duration of last command, background jobs & username.
• bedbugs - Inspired by Agnoster, this multiline prompt includes decorators for git status information, background job count, working directory, user and hostname, Python virtualenv when present, colored return value of last command and root/user sigil.
• beer - Inspired by cloud, but with beer icons.
• bender - Fancy two-line prompt with git integration.
• berghain - Minimalist theme. Includes decorators for the exit code of the last command run and for git status.
• bernkastel - Based on ys. Includes decorations for kubernetes context, current directory, last command exit status and git status.
• bgnoster - Agnoster variant with unicode symbols baked in.
• bigshrimp - A clear and concise theme that includes decorators for username@host, current directory and git status.
• bigyls - Based on lpha3cho. Includes decorators for date, time, IP address, git status, plugins and current directory.
• bira - Fork of Oh-My-ZSH bira theme. Includes decorators for working directory, username@host, git status information, Python venv and a status code when the last command had an error.
• birame - Based on bira.
• biraskull - Based on bira, includes root status and git status decorations.
• biratime - Based on the bira theme, but displays the date instead of the username in the prompt.
• birav2 - Based on bira. Includes git, rvm and virtualenv status decorations.
• black-Void - Includes account info, root user, using ssh, directory lotation, write permission, and vcs info decorations.
• blackrain - Another git-aware theme.
• blaze - Visually similar to powerline. Requires make and g++. Works best with your terminal set to use a nerd font. Includes decorators for current directory, execution time of last command, exit status of last command, git status information, date, time, username and host. Can be extended with custom segments.
• blazux - Includes git status decoration and a smiley/sad face indicator of the last command's exit status.
• blinks (max13ft) - Adds mercurial support to oh-my-zsh's blink theme.
• blinks-xfan - Based on the existing theme blinks.
• bliss - A delicate theme that injects color without overwhelming your workspace. Designed to be used with the bliss iTerm color scheme and bliss dircolors. Includes git status decorations.
• blokkzh - Theme based on oh-my-zsh's built in gnzh theme. Requires a font with unicode support.
• blox - A minimal and fast ZSH theme that shows you what you need. It consists of blocks: each block is shown inside a pair of [square brackets], and you can add blocks by simply creating a function.
• bluehigh - Minimal theme, displays git information.
• bluelines - Clear and blue theme.
• bluo - Colorful prompt segments reminiscent of bullet-train or powerlevel10k. Includes git status decorations.
• boban - A powerline-style file based on Agnoster. Includes decorators for user@hostname, git status, current working directory, python venv, AWS profile, $KUBECONFIG, the terraform workspace and the exit status of the last command run. Requires a Nerd Font for symbols to render properly.
• bogo - Inspired by zeta. Includes git and ruby version decorations.
• boom - Multiline theme, best on dark backgrounds.
• born-in-the-purple - Simple theme with a purple motif. Inspired by Pure.
• bouni - Includes decorators for user@host, current directory, active python virtualenv, and git status.
• boxy - Works well with solarized terminal colors. Includes decorators for username@hostname, current directory, git status, return code for last command, and time last command was run.
• braundo - Straightforward theme with username, current directory, git status, and timestamp.
• bref - A simple prompt. It includes decorators to display git status asynchronously, a notification if the ssh session is remote, the battery level and the number of background jobs.
• brisa - Multiline theme based on fino-time. Includes decorations for username, host, current directory, and git status.
• bronze - A cross-shell customizable powerline-like prompt with icons written in go. Requires nerd-fonts.
• brs - Displays the current song in the prompt with audtool.
• bruh - Includes git status decorations.
• brunty - Includes git status decorations.
• bryce-robbyrussell - Inspired by the powerline and robbyrussell themes.
• bttf-color - BTTF color theme. Includes git status decorations.
• bubblegum - Minimalist bright pink theme with a triangular glyph and your working directory, nothing else—leaving you with the cleanest shell possible.
• bubblified (hohmannr) - Inspired by agnoster. Works best with nerdfonts.
• bubblified (varaki) - Based on bubblified (hohmannr). Changes color when root. Includes decorators to show user@host and current directory.
• buddha - Includes decorators for git status, current directory, exit status of last command run and username@hostname.
• bullet-train - Inspired by the Powerline Vim plugin. It aims for simplicity, showing information only when it's relevant.
• bunnyruni.min - @jopcode's bunnyruni ZSH theme, modified to just display time and directory.
• bunnyruni - Simple, clean, and beautiful theme.
• bureau-env - Modification of the Oh-My-Zsh Bureau theme that adds a Python virtual environment label to the left of the git block.
• bureau-parrot - Based on bureau. Includes git decorations.
• bureau - A clear and informative two-lined prompt. Includes git status optimized for large repositories.
• buster - Plays well with WSL2. Based loosely on Fox and Jonathan themes from oh-my-zsh.
• cactus - Minimalist theme with git status decorations.
• cafeconbits - Simple theme with a coffee cup icon. Includes decorators for git status, current directory and the exit status of the last command.
• calma - Minimalist theme that works well on dark backgrounds. Includes decorators for truncated current directory, git information, time, and for the exit status of last command.
• candy-fantasy - Modified version of Candy Kingdowmtheme.
• candy-light - Light version of the candy theme.
• carriage-return - omz's robbyrussell with an added carriage return.
• catpuccin - Minimalist theme. Includes decorators for current directory, exit status of last command and git status.
• cayun - Shows active Python version and git decorations in the prompt.
• celestialorb - Powerline-inspired theme by @celestialorb. Includes git status decorations, Kubernetes cluster information (if any), current AWS profile and region, and active virtualenv.
• cezhanne - Minimalist ZSH theme with git status decorators. Requires a Nerd Font.
• cf-ps1 - Displays the current foundation and organization and space of Cloud Foundry in your prompt.
• ch4rli3 - Lean and simple theme.
• chaffee - Based on sorin. Shows the current active versions of Java, Scala, Go, Node, Python and Ruby.
• chaos - Inspired by dogenpunk and smt themes, optimized for git users and Python developers. Includes decorators for git status, python virtual environment, background jobs, error status of last command, user@hostname and current directory. Requires a font with emoji.
• chaotic-beef - A tiny and beautiful theme for Oh-My-Zsh without anything superfluous. Includes git status decorations.
• charged - A ZSH prompt optimized for the solarized dark terminal theme.
• checkmate - Decorated with chess pieces. Includes decorators for python venv, current directory, git status and whether you're running as root. Requires a Nerd Font.
• cheeky - Includes chicken emoji, decorators for current directory, git information and current GCP cluster and project.
• chello - Works well on dark backgrounds. Depends on autojump, zsh-autosuggestions and zsh-syntax-highlighting.
• chi - A ZSH theme optimized for iTerm 2 users on macOS.
• chill - Has decorations for the current working directory, last command exit status and git status.
• chinatown - Powerline-esque theme with decorators for the exit status of the last command run, user@hostname, virtual environments and current directory. Requires a nerdfont font.
• chinipage - Minimalist theme that includes git decorations. Requires powerline-compatible fonts and the git-prompt plugin.
• chrisandrew.cl - Includes git decorations. Requires a powerline-compatible terminal font.
• cinnabar - Shows timestamp, large line breaks, git branch and status.
• clarity - Designed for for simpleness and extensibility.
• classic - A classic unix theme with decorators for username, host, current directory and git status.
• classyTouch - Minimal, clean theme with git support.
• classyTouchName - Inspired by classyTouch. Works better with dark backgrounds. Includes git status decorations.
• clean (akz92) - Minimalist ZSH theme.
• clean (brandonRoehl) - A minimalist variant of pure. Pure is not clean, clean is not pure.
• clean (patr1ot) - Fork of the upstream clean with host information added.
• cleansh - Minimalist, includes git, Ruby, node and Python version status decorations. Works with standard fonts.
• clearance - minimalist theme with git, nix-shell and virtualenv status decorations.
• clipper - Minimalist ZSH theme with git support. It includes decorations for pwd, last command exit status code and git status & branch.
• cloudy - Minimal cloudy ZSH theme.
• clover - Inspired by zeta and pure.
• club-house - Requires a Nerd Font. Has decorators for username, hostname, python virtual environment, current working directory, git status information and the exit code of the last command run.
• cmder-wsl - Configuration file for cmderthat is configured to work in quake mode with ZSH and a modified Agnoster theme.
• cmder - A ZSH theme that matches the theme of Cmder, a popular terminal emulator for windows. Includes node and git status decorations.
• cn - Includes username, directory and git status decorations.
• cobalt2 - Wes Bos' Cobalt 2 theme for ZSH and iTerm 2.
• cobalt2git - Cobalt 2 theme with git extensions.
• codemachine - Displays decorators for git info, whether you're logged in via ssh, and the return code of last command.
• coffeenostor - Based on agnoster, with a right-prompt for vi-mode that displays --INSERT-- and --NORMAL--, in a powerline look.
• coldark - A blue-grey theme designed for reading comfort. Includes git decorations.
• collon - Lightweight theme with git status decorations, cwd, time, host, exit status of last command. Does not require special fonts.
• colorbira - Allows per-host prompt coloring, displays rvm, virtualenv and git information.
• common - A simple, clean and minimal prompt, displays current working directory, hostname, AWS vault role, background jobs, current SHA, exit code of last command, and git branch and status.
• comxtohr - Brightly colored theme optimized for dark backgrounds.
• coolmelon - Includes decorators for user@host, time, current directory, node version and git information.
• cordial - Clean and effective ZSH theme with git and npm support.
• cr - Includes directory, time, host name, last command exit status, and git status decorations.
• cramin - Minimal interface with support for GitHub plugins, based on hyperzsh.
• cravend - Includes hostname decorator (only in active ssh sessions) and git status decorations.
• crème fraîche - Works best with light terminal backgrounds, includes git and vi-mode status decorations.
• croque - Powerline-inspired theme with decorators for OS, user@host, git information, git username, current directory and exit status of last command.
• cryo-long - Variant of cryo with added decorators for hostname and current directory.
• cryo - A standalone clone of the original oh-my-zsh theme with date and time added.
• cryptic - Based on aphrodite-terminal-theme. Includes decorators for current directory, git status, time, username, hostname and virtual environment.
• cute - A macOS oh-my-zsh shell theme with cute emoji based on the Powerline Vim plugin.
• cxzh - Works well on dark background, has git status decorations.
• cybensis - Based on af-magic. Includes decorators for git information, hg information, and python virtualenv.
• cypher-ruby - Similar to cypher but includes the active Ruby version.
• czsh - ZSH with oh-my-zsh and the agnoster theme in a container.
• daily-emoji - Shows random emoji at the beginning of each command depending on the day of the week.
• daily - Includes git and ssh status decorations.
• daivasmara - Chill theme with decorators for current directory (truncated if necessary) and git information, including time since last commit.
• dalailahner - Minimalist theme with decorators for git status, username and current directory. Based on Steve Losh's Prose theme.
• damino - Minimal powerline-esque theme with git decorations.
• dangerroom - Informative, minimal, and, above all, X-Men themed. Includes decorators for git status, working directory, parent directory and vim mode.
• dango - Includes decorations for current directory and git status.
• danielparks - Works well on dark backgrounds. Includes decorators for git status, user@host when in an ssh session, success/failure of last command, working directory, python virtualenv, execution time of last command and whether running as root.
• daniloheraclio - Inspired by the robbyrussell theme. Has git and last command exit status decorations. Requires a nerdfont to render properly.
• dark-modern - Includes decorators for git status and current directory.
• darkblood-modular - This version of the popular darkblood theme has been enhanced with a near complete rewrite enabling modularity and a few new features.
• darksoku - Based on the ys and astro themes.
• dbern - Includes battery status and load average decorations.
• delta (asavoy) - Minimal ZSH theme to reduce distractions. Includes an iTerm color settings file.
• delta (dongri) - Another minimal theme with embedded git status.
• delta-prompt - A minimal ZSH prompt.
• devil-puppet - Theme decorated by a pentagram. Has decorators for username, hostname, python virtual environment, current working directory, git status information and the exit code of the last command run.
• devj121 - Includes git decorations with branch glyphs.
• dexter - A theme with an emphasis on the right side (hence the name) of the terminal.
• dfrx - Oh-My-Posh theme. Includes decorators for current directory, execution time of last command, root status, and the time.
• dino - Includes decorations for node, golang, flutter, lua, python & java, also includes git decorations. Requires nerdfonts.
• dissonance - Comes with custom LSCOLORS and LS_COLORS settings files, works with both dark and light terminal themes.
• diy-ys - Variant of ys without hostname or time.
• djkakaroto - Includes git status decorations, works with all fonts.
• dkniffin - Includes ruby version and git status.
• dmx - Optimized for dark terminal windows.
• domixgit - Prompt with git status and current directory decorators.
• doodleshell - Minimalist theme, includes git, terraform and aws status decorations.
• doom - Doom-inspired. Looks similar to powerline. Has customizable segments, decorators for git status, rust, Node.js, python and ruby versions.
• dp - Low contrast theme that shows current git branch, if the repository is dirty and the value of $PYENV_VERSION.
• dr4kk0nnys_v2 - Works well on dark backgrounds, includes git status decorations.
• dracula - A dark theme for Atom, Alfred, Chrome DevTools, iTerm 2, Sublime Text, Textmate, Terminal.app, Vim, Xcode, and ZSH.
• dragon (jeop10) - Inspired by kali linux. Includes git status and working directory decorations.
• dragon (sabertaximi) - Minimalistic, includes git status information.
• drkat - Reminiscent of Powerline. Includes directory, git status, and hostname decorations.
• droolmaw - Configurable prompt that resembles Powerline. Requires a Nerd font. Includes decorators for username, current directory, current directory path, datetime, git author, git status, mise language version and a configurable message based on the exit status of the last command run.
• droolscar - Powerline variant.
• dtheme - Optimized for people using a solarized terminal color scheme and git. Works best with a unicode font.
• duckster - A fork of the gitster ZSH theme that's more ducky fresh.
• ducula - Inspired by Dracula project. Includes git status decorations, username and hostname abbreviations, virtual environment, current working directory, return status of last command and the time.
• dustmod - Derived from the dst theme in oh-my-zsh.
• dyzsh - Based on astro. Includes decorators for git branch & hash, current directory, user, host & time.
• easytocloud - Based on agnoster. Includes decorators for AWS environment, git status, username and the current directory.
• eckig - Minimalist theme with utf-8 icons. Includes git status decorations and a clock.
• efritas - Includes username, hostname, venv, rvm and git status decorations.
• eggshausted - A git-aware theme for people who are tired of getting errors.
• elagoht - Includes decorators for user@hostname, current directory, virtual environment, git status, whether it is running in an ssh session, and the execution time of the last command.
• elessar - A git-aware theme based on gitster. Requires a Powerline-compatible font.
• elm - Includes git status, user@host, date, time and path decorators.
• elsa - Includes root status, pwd and git status decorations.
• emojeer - Emoji flavored oh-my-zsh theme.
• emoji - Based on the robbyrussell oh-my-zsh theme with the git prompt symbols replaced with emoji for better clarity.
• emojirussell - Based on robbyrussell oh-my-zsh theme, with status decorations for current working directory, last command exit status, git branch and status.
• endless-dog - oh-my-zsh-compatible theme that mimics grml-zsh-config.
• enlightenment - Includes decorations for git status, vi-mode indicator, and the time for last command to execute.
• enormous - Takes up an enormous amount of space in the terminal.
• erfan - Combination of the of af-magic and macovsky themes. Includes git and virtualenv status decorations.
• eriner - A Zim fork of the Powerline-inspired agnoster prompt theme. Includes git status decorations.
• escape - Includes decorators for git information, username, time, current directory and last command exit status.
• eubw - A simple theme with git information.
• eucalyptus - Simple one-line theme for minimalist vi-mode users inspired by agnoster and powerlevel9k. Includes git status indicator, vi-mode indicator, current directory and current path.
• even-more-emojis - Customized version of emoji which adds more emojis and more information. Includes decorators for git status, current directory and the exit status of last command.
• excess - Simple ZSH color theme.
• ez-pz - Minimalist theme with git status decorations, inspired by bureau.
• fall - Minimalist theme with fall icons. Includes git status decorations.
• fattyarrow - Minimal ZSH prompt that works better on dark backgrounds.
• fbi - Powerline-inspired fork of Bureau with decorators for nvm environment, git status, username@hostname and current directory.
• fdT2K- Based on agnoster, preset to include virtualenv, last command status, nvm, docker machine and git, hg and bzr status decorations.
• fe80 - Includes decorators for git information, current directory, user@hostname, time, and the return code of last command when it is nonzero.
• feder - Clean, simple, compatible and meaningful. Tested on Linux, Unix and Windows under ANSI colors.
• filthy - A disgustingly clean ZSH prompt.
• firefoxic - Fork of Bureau with tweaks to the node and git decorators.
• fish (raniconduh) - ZSH theme reminiscent of the default fish shell theme. Includes git status decorations.
• fish (sbfkcel) - Minimalist theme with decorators for git status, current directory and username.
• fishy-lite - Fork of the original fishy theme in oh-my-zsh with much of the extraneous stuff cut out to improve load speeds. Includes a battery gauge and git status display that can be enabled on the right-hand side of the prompt.
• fishy2 - ZSH theme inspired by original fishy.
• fluent-git - Displays time of last command execution, error code, hostname, username, git status, kubernetes cluster and namespace, path and ssh connection status.
• flux - A no-nonsense minimalist theme with git status decorations.
• forerunner - Custom setup for powerlevel9k. Includes git status decorations.
• fortuity - Includes status of last command, git information and current directory.
• frank - Frank keeps to the point, displaying information compactly but readably on a single line. Frank keeps to the facts and only tells you extra things when they are important.
• friendly-fiesta - Fork of terminal-party theme.
• frisk-arrow - A theme based on the frisk oh-my-zsh-theme.
• frisk-red - Red version of the frisk theme from oh-my-zsh.
• fritz - Works well on dark backgrounds. Includes git status decorations.
• frlo - Uses your computer's hostname to come up with a (hopefully) unique three-color theme to display in your prompt, so you know at a glance which machine you're logged into.
• frontcube - Requires a nerd font. Based on the official Frontcube theme. Includes decorators for git status and current directory.
• funkyberlin - A colorful two-line theme with support for git and svn.
• funkydrac - Multiple Dracula-themed omz themes based on funky and an oh-my-posh theme based on alien
• furio - Fork of the Cloud oh-my-zsh theme. with different colors and emojis.
• furry-umbrella - Colorful theme, works better on a dark background.
• gabriel2m - Minimalist theme with decorators for the current directory and git status.
• gaia - Originally a fork of Bureau adds new virtual environments info to the prompt: Kubernetes, virtualenv, rbenv and Java versions. Includes git status integration.
• gal - Minimalist theme based on gallois.
• gallifrey-war - Inspired by gallifrey. Includes decorators for git information, user@host and current directory.
• garden - Works better with a dark terminal background, includes git status decorations.
• garrett - Prezto prompt with the information you need the moment you need it.
• gawaine - Nicola Racco's theme. Requires rvm & git plugins.
• gbt - Go Bullet Train is a very customizable prompt builder inspired by Bullet Train and oh-my-zsh that runs much faster. Includes many different status cars. Includes a prompt-forwarding feature than enables the user to forward their user-defined prompt to a remote machine and have the same-looking prompt across all machines via SSH but also in Docker, Kubectl, Vagrant, MySQL or in Screen without the need to install anything remotely.
• gcloud-prompt - Shows the current gcloud configuration in the prompt.
• gentoo - Breaks out the oh-my-zsh gentoo theme into a separate repository for non-omz users.
• geometry - A minimal ZSH theme where any function can be added to the left prompt or (async) right prompt on the fly.
• geometryHostInfo - Adds host info to the geometry theme.
• gerry - Based on bureau, includes decorations for git status, current time, username, hostname and current directory.
• get-to-work - Minimalistic design, includes decorators for git status, virtual environment and the time.
• gg - Includes decorators for time and git status.
• ghoti - Mimics the fish-shell default prompt. Includes git decorations.
• gianu-alternative - An alternative to OMZ Gianu that changes prompt based on privilege. Includes git status and current directory decorators.
• gideon - Inspired by avit, includes git decorations, IP address, host and path.
• gimbo - A variant of purepower with more features, a little eye candy and context-sensitive extra lines. Includes git status decorations, history number, username/hostname context, directory status, status of last command if it failed, and the Python virtualenv name if present.
• gimme - A simplistic theme for ZSH with git integration. Inspired by the gitsome theme.
• girazz - A modification to the gnzh theme which adds vi mode to the right prompt.
• git-kali - Based on An informative git prompt for kali. Includes decorators for git status, username@host, and the current directory.
• git-prompt (awgn) - A fast git prompt for bash, zsh and fish.
• git-prompt (olivierverdier) - Displays information about the current git repository. In particular the branch name, difference with remote branch, number of files staged or changed, etc.
• git-prompt (woefe) - A fast, customizable, pure-shell, asynchronous git-aware prompt for ZSH heavily inspired by Olivier Verdier's zsh-git-prompt and very similar to the "Informative VCS" prompt of fish shell.
• git-prompt-kit - A configurable set of components for creating feature rich, high performance Git-aware zsh prompts (aka themes) with minimal coding.
• git-simple - Simple theme that includes detailed git status decorations.
• gitbash - Mimics the default prompt from Git for Windows. Includes git status, user@host and current directory decorators.
• github - A GitHub-inspired theme. Shows decorators for (truncated) current directory, hostname and git status. Includes both light and dark modes and detects system settings for that on macOS and Linux.
• gitneko - Has a neko (^>ω<^) prompt with git status information.
• gitsome - Super simple prompt with git info, optimized for the Flat Terminal color scheme.
• gitstatus - Shows command and git status decorations.
• gitster (shashankmehta) - When in a git repo, it shows the location from the git repository root folder. When not in a git repo, it shows the path relative to home, ~.
• gitster (zimfw) - Zim fork of shashankmehta's gitster prompt theme
• gitsterv2 - Forked from the original gitster theme.
• gk3000 - Includes git status decorations and full path to current directory.
• glider - Based on strug. Includes decorators for git status, username, hostname and current directory.
• glimmer - Includes git branch, time and user@host decorators.
• gndx - Includes git status, hostname, directory and last command exit status decorations.
• gnrnzh - Customization of gnzh.zsh-theme from oh-my-zsh.
• gocilla - Theme for iTerm 2 and ZSH. Uncludes git status, user@host, path and date decorators.
• goldenprompt - A simple prompt that incorporates fish-like functionality and decorators for git status, current directory.
• goprompt - Lightning fast. Includes decorators for truncated current directory, last command duration & exit status, vim-mode indicators, git information, datetime and parent process name.
• gops - Fast powerline-like prompt. Includes git status, current directory, root status decorations.
• gorchak - Inspired by [robbyrussell(https://github.com/ohmyzsh/ohmyzsh/wiki/Themes#robbyrussell)] and af-magic. Includes decorators for git information and Node.js version.
• grayt - Simple yet informative theme that includes git decorations and the return status of the last command.
• green-lambda - Minimalist Lambda theme. Includes git decorations.
• greencastle - Minimalistic theme, that supports really, really, long branch names, without severely truncating the prompt. The theme is inspired by the jonathan theme and the robby russel theme. Includes decorators for current directory, git information and the exit status of the last command run.
• greenclean - Fork of akz92/clean with a bit more green and permanent clock on the right.
• griffin - Minimalist, includes git status decorations.
• grs - Includes git status, user id and working directory decorators.
• gruvbox (hgaiser) - Sets colors from the gruvbox vim plugin.
• gruvbox (sbugzu) - Based on agnoster, uses the same colors from the gruvbox vim plugin.
• guezwhoz - Minimalist, includes git status decorations.
• gugulenok - Has both a dark and a light mode. Includes decorators for git status, time and current directory.
• guri - A Simple and fast Oh-My-Zsh theme, based on Pure's design.
• gus - Hackable transient theme. Includes decorators for conda, git information and current directory.
• hackersaurus - A theme with git status and exit code of last command run decorators embedded in the prompt. Related to powerlevel9k.
• halfeld - Minimalist theme with git decorations.
• halil - Fork of oh-my-zsh's amuse theme.
• hana-matcha - A simple theme with the first character being 花(hana), the kanji for flower. This theme was inspired by a keycap set called DSA Hana. This pairs well with the hana atom theme. Includes git status decorations.
• handy - Colorful and lightweight theme. Shows root status, git status, current directory and user@hostname decorations.
• hanpen - Shows git branch and status, last command exit code, last command execution time if more than ZSH_THEME_HANPEN_CMD_MAX_EXEC_TIME.
• hapin - Based on oxide, includes git status decorations and current user/host information.
• happy-coding - Stripped down version of passion. Includes decorators for time, git branch, last command execution time and last command exit status.
• haribo - Simple git status + timestamp in prompt.
• hcompact - Displays time, OS (including distro if on Linux), directory and whether running as root.
• headline - A responsive ZSH theme featuring Git status information and a colored line above the prompt.
• heapbytes - Includes decorators for current directory, tun0 ip if on a VPN, wlan ip when not on VPN and git information.
• heart - Heart themed prompt for light backgrounds.
• hedroed-bureau - Based on bureau, with added git status decorations and npm status.
• helb - Loosely based on Gentoo's old bash theme. Includes git information, return value of last command, and uses different username color and prompt char for users ($) and root (#).
• hematite - Minimalist promot that tries to show only the status decorations that are actively useful at a given time.
• hex - Heavily based on bira, and gruvbox, which in turn is based on agnoster. Includes decorators for current directory, git status information, active python virtualenv, exit status of the last command run. Requires a Powerline-compatible font.
• hexagon - Minimalist ZSH theme based on geometry.
• hfulldate - Displays time, date, OS (including distro if on Linux), directory and whether running as root.
• hhktony - Inspired by robbyrussell theme + ssh connection status prompt.
• hietan - Includes decorators for current directory, date & time, git status and the exit value of the last command run. Requires a Nerd Font.
• hijack - Includes decorators for user@hostname, current directory, and git information.
• hina - Written in golang, includes git status decoration and kubernetes context.
• hip-fellow - Includes git status decorations and works with standard fonts.
• hipstersmoothie-p9x - A variant of powerlevel9k.
• ho-my-zsh - Includes decorators for current directory and git information.
• hoffish - If the agnoster theme and fish shell had a ZSH theme for a child. Includes decorators for git status, trimmed path to current directory, root status, exit status of the last command run and the active python virtualenv. Requires a Powerline font and the zsh-autosuggestions and shrink-path plugins.
• hogbal - Works best with a dark background and a 256 color terminal program. Includes decorators for virtualenv, git information, username@hostname and current directory.
• home - Pretty and short one-line theme that makes you feel at home.
• hometown - A feature rich, high performance git-aware ZSH theme with segments for the user, host, time, the current working directory and its parent, and detailed full Git status within a Git repo.
• honukai-iterm - Honukai theme and colors for oh-my-zsh and iTerm 2.
• hoozeeth - Minimalist theme, includes decorators for user@hostname, the date & time, and the current working directory.
• horizontal - Two line prompt with a horizontal separator.
• hornix - Displays time & date, OS (including distro if on Linux), directory and whether running as root.
• horse-sh - A very minimal brown/red ZSH theme.
• htb - Inspired by the pwnbox on a HackTheBox machine. Includes decorators for user@host, IP address and the current directory.
• hub - Simple and clean, includes the return code of the last command executed.
• hug - When you're working and need a hug. Includes git status.
• humbled - A clean and humble theme with left-aligned condaenv, virtualenv and git status. Requires condaenv plugin.
• hydrogen - A simple multiline ZSH theme. It shows username, hostname, current directory and git status decorations.
• hyper - Designed to work with the hyper terminal theme, includes git status decorations.
• hyperzsh - Gives you a comprehensive overview of the branch you're working on and the status of your repository without cluttering your terminal.
• iamskok - Works well on a dark background.
• iay - A {ba,z}sh prompt written in Rust. Includes decorations for the current directory and git status.
• ice - Very lightly modified bureau theme combined with bira.
• ichirei - Colorful. Includes decorators for git status, time & current directory. Requires a Nerd Font.
• icicle - Includes git status decorations, and whether running as root.
• iGeek - Modified iGeek theme. Works with macOS out-of the box, includes git status decorations.
• igeek - Displays system information when starting a new terminal session.
• iggy - A super happy awesome Powerline-style, git-aware prezto only theme.
• igorsilva - Shows current directory, customizable delimiter, current branch, and git status decorators.
• iguanidae - Includes git, nvm and venv decorations.
• illusion - Includes username, current working directory, git status and last command status decorators.
• illuvia-gitster - Fork of ergenekonyigit/lambda-gitster with spacing improvements and an updated icon. Includes git status information.
• imp - Based on zork and optimized for dark backgrounds.
• infernus - Minimalist theme, better on dark backgrounds.
• infoline - Clean theme that shows git status, background jobs, remote host, and other information.
• integral - Math-inspired, includes decorators for time, current directory and git status.
• inthedeepspace - Based on intheloop and inspired by vim-deep-space.
• intheloop-powerline - An extension of the intheloop theme to use powerline fonts.
• itg - itsthatguy's theme.
• itlbv - Minimalist. Includes decorators for git status and the current directory.
• ittecture - Includes decorators for current directory and git information.
• ivabus - Inspired by the GitHub Codespaces prompt. Includes decorators for git status, username and current directory.
• ivy - Works well on dark backgrounds. Includes user@host, git status and time decorators. Based on the obraun theme.
• jacobin - Based on refined and ys themes, includes git status decorations. Includes an optional iterm2 color scheme.
• jake - Shows the time, the current directory, and git branch information including the branch name and a red + if the branch has un-pushed changes.
• jam - Optimized for dark backgrounds, includes git status and rvm status.
• jax Reminiscent of Powerline. Includes decorators for current directory and current user.
• jc - For dark terminal backgrounds, includes git status information.
• jcl - Loosely based on the ys theme.
• jeff - Includes decorators for user@host, time, current directory and git status. Based on bira.
• jerome - Colorful theme based on the dieter theme, but with a yellow hostname. Includes git decorations.
• jhleeeme - Includes git and python virtualenv status decorations, user, pwd,time and system name.
• jnooree - Minimalist theme with colors adapted from the robbyrussell theme. Includes decorators for git status, whether running as non-default user and current working directory.
• joje - Includes decorators for git status and current directory.
• jon - A simplified bira with the colors of robbyrussell.
• jovial - Shows decorators for host, user, path, development environment, git branch, and which python venv is active.
• jpegleg - Similar to dark blood theme, includes timestamp and git decorations.
• js-magic - A simplified take on af-magic. Includes current working directory and git status decorations.
• judgedim - Minimalist prompt.
• july - Minimalist prompt. Includes decorators for user, host and current directory.
• just-another - Just another theme, with hostname when you're sshed to another machine.
• just-around-the-corner - Counts down the days until Christmas. Includes git status decorations.
• jwalter - Powerline-style theme with git, svn, npm, rvm and network awareness. Requires Powerline-compatible terminal font.
• jyumpp - Configuration file and installer for Powerlevel 10K.
• kali-like - Inspired by the Kali Linux default ZSH theme. Includes decorators for user@host, current directory and git information.
• kali - Includes git decorations.
• kalsowerus - Colorful powerline-inspired multi-line theme, includes decorations for git status, directory, last command exit status and nvm information.
• karu - Minimalist single line ZSH prompt.
• kawaii - Has terminal and virtual console modes. Includes decorators for username, directory, last command exit status, timestamp and git status.
• keloran - Theme that includes a few features from other themes.
• kenton - Optimized for dark backgrounds, includes git status information.
• kevin - Colorful theme, includes iTerm 2 color schemes.
• kgzsh - Includes git status deorations, works well on darker backgrounds.
• kido - Based on ys and robbyrussell themes. Includes decorators for the exit code of the last command run, python virtualenv and VCS status.
• kimwz - Minimal theme.
• kinda-fishy - Based on Fishy theme, but shows full paths instead of abbreviated directories and only shows user@machine in ssh sessions and docker containers.
• kirkdawson - Powerline-inspired. Includes prompt decorations for git status, last command exit status, user@hostname, working directory and whether the user is running as root.
• kiss - Simple theme for oh-my-zsh, VSCode, iTerm2, Neovim, and RStudio. Includes git status decorations.
• kketcham - Theme with nifty colors on the git info.
• ko - Includes decorators for git status and current directory.
• korittg - Minimalistic but informative. Includes decorations for git status, current directory and the kubectl context and namespace.
• kote - Best for dark backgrounds. Includes git status decorations.
• kotterstep - Two line theme designed for dark terminals, has git decorations.
• krak3n - Shows golang version and the current git branch.
• kraken - A dark theme for ZSH.
• ksposh - Includes decorators for python virtual environment, git information, current directory and username.
• kube - Based on macos-terminal, includes kubectl context. Has time, directory, and git status decorations.
• kumavis - Agnoster fork optimized for solarized terminals. Requires powerline-compatible font.
• kw - Colorful theme with git and hg status information, ability to add host-specific colors to hostname.
• kyuu - A simple theme with the first character being 九(kyuu), the number 9. The primary color is blue with a magenta accent. Includes git status decorations.
• lacerate - Minimalist theme with decorations for git, hg and python venv status.
• laconic - Simple theme with git status and current directory decorators.
• lagnoda Inspired by agnoster and lambda themes. Includes decorators for username@hostname, current directory, git, hg, or bzr status, current virtualenv, exit status of last command run, and current aws profile.
• lagune - A minimal ZSH theme.
• lambda (bluedragon1221) - Includes decorators for current directory and git status.
• lambda (cdimascio) - Inspired by the lambda theme. Includes git status decorations.
• lambda (halfo) - A ZSH theme optimized for git users who use unicode-compatible fonts and terminal applications.
• lambda-blazinggit - Includes blazing fast, detailed git information. Requires Nerd Fonts and the gitstatus plugin.
• lambda-gitster - Minimalist prompt that includes git information.
• lambda-minimal - Simple theme based on lambda with git status and virtualenv information.
• lambda-mod - A simple ZSH theme, optimized for git usage.
• lambda-p - Inspired by the lambda mod and Lambda V themes. Includes git status decorations.
• lambda-pure - A minimal ZSH theme, based on pure, with added Node.js version decorator.
• lambda-v - A combination of the Lambda and Fishy themes, includes git status decorations.
• lambda-zen - inspired by lambda mod theme with graphical git status decorations.
• lambder - Includes git status decorations, works best with a dark terminal theme.
• laniksj - Works best on a dark background. Based on the great ys theme and Honukai ZSH Theme. Shows root status and git status decorations.
• lazyprodigy - Optimized for dark terminals, has variants for local and remote systems.
• leafia - Leafy prezto theme that shows git status information.
• lean - Inspired by pure. Has decorators for git status information, exit status of last command run, and the elapsed time of last command.
• lemon - Many beautiful colors for you to enjoy. done with care and patience. Includes git status and ruby version decorations.
• leon - Works well on light background. Includes git status, time, username@host, working directory and last command exit status decorations.
• less-noise - Minimalist theme with decorators for git status, current directory and the current time.
• leverage - Based on minimal, uses colors, and an extra ¬ character, to better distinguish the command line prompt from your output.
• lewis - Black, white and red theme. Shows git status information.
• lgbtq - A collection of lgbtq themes for your terminal.
• light - Works best on a light background. Includes decorators for username@hostname, git status and the current directory.
• lightbulb - Includes decorations for kernel, OS version, uptime and git.
• lighthaus - A prompt that compliments the Lighthaus theme. Shows git information, GitHub/GitLab logo and shows changes as and when they occur.
• lila - Minimalist theme, best on a dark terminal background.
• lildragon - Dragon-themed. Includes decorators for git status, current directory & username. Requires a font with emoji glyphs.
• lilith - Modification of gallifrey and hyperzsh.
• lime - Simple and easily customizable ZSH theme.
• limpide - Modified version of miloshadzic theme which displays parent and current directory.
• linear - Reminiscent of Powerline. Includes segments with git status, Pythonvirtualenv, current directory and current time.
• link - Minimalist. Includes git status and last command exit decorations.
• linuxer - Inspired by Yaris Alex Gutierrez's classyTouch, Yad Smood's ys, and the Bureau theme.
• linuxero - Minimalist. Includes decorations for root status, current directory, git status, current ruby rvm environment and current python virtualenv.
• liquidprompt - A full-featured & carefully designed adaptive prompt with useful information when you need it. It shows you what you need when you need it. You will notice what changes when it changes, saving time and frustration.
• lish - A casual theme. No roughness, just smooth. Includes git, user@host, last command exit status, current directory, current time and root status decorators.
• liver - Colorful, includes git status, user, host, current and relative path to the current repository root decorations.
• llama - Minimalist theme used by discerning llamas.
• logico - Has git decorations. Shows remote status and indicator for vi-mode.
• lone-star - Texas-themed theme based on Sindre Sorhus' pure theme.
• longsilvern - Includes git and compact pwd decorations.
• lorond - Compact version of af-magic. Includes git status, works with standard fonts.
• lperezp - Includes decorators for user@hostname, git status, current directory and the exit status of the last command run.
• lpha3cho - Modified version of the intheloop theme for pentesters which includes the date, time, and IP address for pentest logging.
• luceast - Optimized for git. Includes decorations for username, host, time & working directory.
• luckycoding - Based on the robbyrussell theme, includes git decorations and the last command's exit code.
• ludvig - Minimalist. Includes decorators for git status, current directory, current time and the last command's exit status.
• ludwigws - Variant of lambda-mod theme. Has git decorations, requires a powerline-compatible terminal font.
• luke - Includes git decorations. Based on the frisk oh-my-zsh theme.
• lukerandall-extended - Extended version of the lukerandall theme. Includes decorations for git status and the status of the last command run.
• lunachar - Minimalist theme.
• macos - Includes git status decorations.
• mad - Includes git status and last command execution time decorations.
• madas - Inspired by af-magic. Includes decorators for git status, user@host, and whether the last command failed.
• magento - Add Magento Cloud Command Line Interface (magento-cloud CLI) completions.
• magicmace - Inspired by xero's ZSH prompt and eriner's prompt. Includes status codes for active python venv, exit status of last command, shortened working directory, git status decorations.
• magico - IOsonoTAN's magico theme.
• magpie - Minimalist theme with custom logic to display paths relative to the root of the current git. Includes decorators for time, current directory, username@hostname and git status.
• mainnika - Includes decorators for last command exit status and the 1, 5 and 15 minute load averages.
• maivana - Includes kubectl context, git status decorations.
• majemoji - Adds a random emoji to each session's prompt. Includes git status decorations.
• malev - Has minimalist and normal variants. Includes decorators for hostname, directory, git status and the last command's exit status.
• mantis - Minimal theme with git status and information decorators.
• materialshell - A material design theme for your shell with a good contrast and color pops at the important parts. Designed to be easy on the eyes.
• matrix - Variant of powerlevel9k styled to look like something in the Matrix movie trilogy. Includes git status decorations.
• matter - Shows git status, AWS vault role, background jobs, exit code of last command & hostname.
• mau - A ZSH theme with a cat twist. Includes git status decorations. Based on the kphoen and smt themes.
• mbolis - Includes git decorations, changes prompt color if root user, active jobs, and jenv integration.
• mdmini - Includes git and ssh status decorations.
• meganerd - Inspired by jonathan. Includes decorators for git status, user@hostname, current directory, time and the last command's exit status.
• megaprompt - A maximalist prompt including keyboard mode, ownership info, and other contextual info, with λ as the prompt character. Requires the hooks plugin.
• metalmajor - Includes git status decorations, shows exit code of last command if nonzero.
• mexassi - Checks the /sys/class/power_supply folders to determine if the system is installed on a laptop or desktop machine. Reads the battery percentage grepping acpi command and displays it in the prompt. Includes git decorations.
• mh-fzj - Includes rvm and git status decorations.
• michaelpass - POSIX-friendly cross-platform alanpeabody mod w/ convenient timestamps and full git/ruby support.
• michelebira - Variation of the bira theme. Includes decorators for git status, username, current directory and the return code of the last command run.
• midin - Works well on dark terminal background, includes git status decorations.
• mike-was-here - Minimalist, includes git status decorations.
• milight - Minimal ZSH prompt with git status display, works best with dark terminal backgrounds.
• min - A minimalistic ZSH prompt.
• mindful-space - ZSH theme with space in mind.
• mini-simple - Minimalist. Includes vcs status decorations.
• minima - Includes git, node, golang, yarn, php, docker and python status decorations.
• minimal (glsorre) - A minimal asynchronous ZSH theme optimized for use with the Fira Code font and the Solarized Light terminal theme.
• minimal (subnixr) - Minimal yet feature-rich theme.
• minimal-improved - Theme for dark terminals, includes git decorations in the right-side prompt.
• minimal-os - A minimalist prompt with helpful git status and system-specific decorators.
• minimal-terminal - Includes decorators for username@host, current directory, git information and the last command's exit code.
• minimal2 - A minimal and extensible ZSH theme. Forked from subnixr's original and adapted for Zimfw.
• minimalx - Inspired by kolo theme from oh-my-zsh.
• mint - Includes decorators for current directory, whether running on a laptop or a desktop, and git status.
• mira - A modified bira with time info and a simplified start prompt.
• mirage - Includes prompt decorations for git status, last command exit code, whether sudo timestamp file is present and current active Python virtual environment.
• miramare - Includes git status decorations. Works best with Deepin Terminal.
• misa - Misalabs' ZSH theme.
• mixed - Optimized for dark backgrounds.
• mnml - Minimal theme with git status decorations.
• mochi - Simple theme, designed to resemble rust main function. Includes git and hg status decorations.
• mochi2 - Minimalist theme. Includes git and hg status decorations.
• moderno - A simple and modern ZSH theme inspired by the robbyrussell theme from Oh-My-ZSH. Includes git status decorations.
• modesty - A clean and modest ZSH theme with condaenv, virtualenv and git status decorations displayed neatly right aligned. Requires condaenv plugin.
• molokai-powerline - Based on agnoster.
• momoyo - Reminiscent of powerline. Includes decorations for git status, username, and working directory.
• monsi - Includes git status, last command exit status and current directory decorators.
• moon-lite - Minimalist. Includes decorators for git status, current directory and the exit status of the last command run.
• moonline - Minimal but easily extensible prompt.
• moux - Works well with a dark terminal background, includes git decorations in RPROMPT.
• msys2 - Inspired by MSYS2. Includes decorators for user@host, git status and the current directory.
• mu - Improves display of multiple git statuses. Inspired by lambda mod theme. Requires a powerline-compatible font.
• multi-shell-repo-prompt - Provides useful information (in your prompt) about the repository that you are in. It currently works for Git and Mercurial, under ZSH as well as bash.
• multiline - Powerline-esque theme based on agnoster.
• muslim - A simple minimal ZSH prompt theme.
• musy - Inspured by muse theme. Includes git status decorations.
• my - Variant of kolo.
• myzsh - Maxime Garcia's myzsh theme.
• mzt - Sets up LS_COLORS, colorizes diff and includes git status and current working directory decorations.
• nablaman - Similar to powerlevel10k. Includes decorators for the last command's exit status, user@hostname, git status and the current directory. Works best with a dark terminal theme.
• nanika - Optimized variant of robbyrussell. Includes git status decorations.
• nanofish - Adds fish-style directory prompt to nanotech theme.
• nbrylevv - Minimalist theme with text git status decorations.
• nctu - Lightweight theme with an emphasis on speed. Includes git status decorations.
• neewbie - Minimal theme with git decorations. Based on robbyrussell.
• neo++ - Simpler, more intuitive, and less clustered than the one above.
• neon-potato - Colorful and minimalist theme. Includes git decorations.
• neon - A pretty and minimal ZSH theme with git decorations.
• nerdish - A prompt theme for ZSH which uses Nerd Fonts.
• nerdp - Nerd powerline-style prompt. Requires a nerd font. Includes decorators for git status, username@hostname, current directory, Python virtualenv, filesystem usage check, 1 minute CPU load, available memory and the time.
• nerdps1 - Reminiscent of powerline. Requires a nerd font. Includes decorators for user@hostname, git information, truncated current directory, python virtualenv, exit status of last command run and the time.
• nescalante - Optimized for dark terminal backgrounds, includes git decorations.
• netmask - Termux-first theme. Includes decorators for ip address, full path to current directory, git status and python virtual environment.
• neurosimple - Includes git decorations and vi-mode indicator.
• newt - Fat & fast theme – beautiful inside and out, styled segments done right. Extremely customizable, includes git, username, execution time, directory, background jobs and edit mode decorations.
• newton - Includes git status and external IP address decorations.
• nextbike - A very basic theme which just features an macOS bike icon.
• nidoranarion - Colorful, shows git status decorations.
• nikitakot - Small and simple oh-my-zsh theme. Shows current directory and 2 directories behind, git and nodejs status decorations.
• ningxia - Based on af-magic.
• ninik - Inspired by agnoster and ubunly. Includes decorators for OS, current directory, python virtualenv and git status. Requires a Nerd Font or Powerline-patched font.
• niotna - Includes decorators for git status and current directory. Customizable colors.
• nknu - A simple oh-my-zsh theme.
• nmaxcom - Minimalist ZSH theme with git status decorations.
• node - oh-my-zsh's Node.js theme, broken out to make it easier to use with other plugin managers.
• nodeys - Based on the ys theme, with added Node.js version (from NVM plugin).
• noon - Has light and dark variants, shows git information.
• nord - Includes git status decorations and displays the active conda environment.
• normanius - Derived from bira. Includes decorators for git status, user@host, python virtualenv, and ruby rvm version.
• nostalgia - Minimalist theme inspired by Windows CMD prompt. Includes decorators for user@hostname, git status, current directory and python virtualenv.
• nothing - Lightning fast and really simple because it has almost nothing in it.
• nova - Includes git status decroations. Overrides LS_COLORS and LSCOLORS settings.
• nox - Dark theme, displays the current working directory and git status.
• nt9 - A clean, distraction free and git focused development theme. Shows path relative to git root (or ~ when outside git repo), time since last commit, current SHA, branch and branch state.
• nunorc - Minimalist theme, works well on dark backgrounds. Includes git, mercurial and svn satus decorations.
• nuqle - A simple theme for prezto and oh-my-zsh.
• nuts - Minimalist theme, includes git status decorations and time.
• oblong - Simple bash-inspired theme based on gitster and basher. Includes status decorations to show if user is root, the exit status of last command run, git branch and its clean/dirty status.
• odie - Works well on a dark background. Includes git status, python virtualenv and vi-mode status decorations.
• odin - Odin is a git-flavored ZSH theme.
• odra - Colorful, works well on dark backgrounds. Includes decorators for git status, current directory, username and exit status of the last command.
• oh-flowers - Multiline theme with git decorations.
• oh-my-git - An opinionated prompt for bash and ZSH.
• oh-my-posh - Not ZSH-specific, but very nice and works with ZSH. Allows you to use the same configuration for prompts in all shells.
• oh-my-via - Theme for ZSH which mainly forks the historical theme used on VIA servers.
• ohmypc - Works well with dark terminal windows. Includes git decorations.
• om - Minimal theme, works with dark backgrounds, includes git status decorations.
• omszt - Minimalist theme with git decorations.
• omuse - Based on Oh-My-ZSH's amuse. Has decorations for git status, time, absolute pwd, RAM usage, time used by last command, and last command exit status.
• operator - Clean and simple theme, works best with Menlo for Powerline.
• ortiz (andres-ortizl) - Fork of eriner with decorations for the interval between commands and k8s context.
• ortiz (guezwhoz) - Simplified fork of eriner with git status, kubectl context and elapsed time decorations.
• osx2 - Based on archcraft. Minimalist. Includes decorator for current directory.
• otter - Otter-themed theme with git status, user@host and current directory decorators.
• outer-space - Includes decorators for user@hostname, active python virtual environment, current directory and git status.
• owczarczak - Inspired by bira, dieter and fino-time. Includes venv and vcs status decorations.
• owi - Minimalist theme with git status decorations.
• owiewestside - Includes git status and virtualenv information.
• oxide - A Minimalistic and Dark ZSH theme.
• ozono - 🌏 OZ0NO - Let's Breathe a clean ZSH.
• p9k-theme-pastel - A theme for the powerlevel10k prompt that puts an emphasis on simplcity while still getting important information across.
• pacmandoh - Enhance your command-line with a sleek theme. Includes decorators for git integration, permissions feedback, Python environment support, and dynamic prompts, all in one, customizable with a single installation script and selectable styles.
• pad - A concise and colorful oh-my-zsh theme.
• page - A simple theme with VCS support. The prompt shows 1 level of the current working directory, branch, and a color coded curved fat arrow.
• palenight (jenssegers) - Allows display of host information, includes git branch decoration.
• palenight (rhklite) - Shows detailed git status information with icons in the prompt.
• panda - Includes git and root status decorations. Best on a dark background.
• papercolor - Color scheme for ZSH, vim and tmux. Includes git status decorations.
• paramour - Simple and clean, has decorators for git status, username, time, current directory and username. Requires a nerd font in your terminal.
• paroape - Based on lpha3cho
• parrot-htb - Includes decorators for current directory, git status and username@hostname.
• parrot - Based on Parrot OS bash theme. Includes decorators for user@host, git information, exit status of last command, time and current directory.
• passion - Includes decorations for current time, git status, last command run time in milliseconds, and the exit status of the last command. Requires coreutils on macOS.
• pastel - A ZSH theme inspired by sugar-free. Includes git decorations.
• paxton - Inspired by powerline. Includes segments for git branch, time, last command exit status and current directory. Requires a powerline-compatible font.
• pecodez - Optimized for dark terminals. Has decorators for snyk version, node version, AWS profile, kubernetes context and git status.
• pedantic - Customizable colors and output. Includes decorators for detailed git information, root status, last command's exit status, user@host, current directory and the time.
• pentest-report - Designed for pentesters, offering a clean and efficient prompt to streamline daily tasks during audits and penetration testing. The theme includes decorators for real-time display of the date, time, IP address, current directory, and the result of the last executed command.
• persi - Includes git decorations. Works with both light and dark backgrounds.
• phalanx - Minimal theme in the spirit of the robbyrussell and Pure Shell themes.
• phi φ - A clean and simple theme for ZSH inspired and forked from the Lambda (Mod) ZSH theme.
• pi - A minimalist theme with git status decorations.
• piboy - A simple and elegant multi-line theme for ZSH. Includes a colourized timestamp, git & syntax highlighting, and elevated root theme.
• pico - Simple prompt modified from zap-prompt with decorators for git information, user@hostname and working directory.
• pifabs - Minimal theme with decorators for git status, username, host and working directory.
• plain-ui - Minimalist, but includes git status decorations.
• plain - A plain and simple theme for ZSH which shows basic git information.
• planet - A slimmed down version of steef from oh-my-zsh.
• plankton - Simple, no-frills theme.
• plantyhoe - Minimalist theme based on a love of plants and apples. Includes git status decorations.
• platypus - Platypus is a simple and convenient theme for oh-my-zsh used by Frédéric de Villamil.
• pog7x - Works with unicode. Includes decorators for git information, current directory, last command exit status & execution time, time, virtualenv, nvm, rvm, rust, go, kubernetes context, and elixir.
• pointer - Shows working directory, the return status of the last command, and git current branch.
• polyglot - a dynamic prompt for zsh, bash, ksh93, mksh, pdksh, dash, and busybox ash that uses basic ASCII symbols (and color, when possible) to show username, whether it is a local or remote ssh sesssion, abbreviated path, git branch and status, exit status of last command if non-zero, any virtual environment created with virtualenv, venv, pipenv, poetry, or conda.
• poncho - RDM's basic oh-my-zsh custom theme.
• poor-programmer - Programmer's theme with git status, ruby version and project path.
• powerbash - Works well with dark terminal backgrounds, includes git status decorations.
• powerless - Tiny & simple pure ZSH prompt inspired by powerline.
• powerlevel10k - A fast reimplementation of powerlevel9k ZSH theme. Can be used as a drop-in replacement for powerlevel9k, when given the same configuration options it will generate the same prompt, only faster.
• powerlevel9k - Powerlevel9k is a theme for ZSH which uses Powerline Fonts. It can be used with vanilla ZSH or ZSH frameworks such as Oh-My-Zsh, Prezto, Antigen, and many others.
• powerlevelHipstersmoothie - Add-on for powerlevel9k.
• powerline (brucehsu) - A two-line version of powerline: one for information, one for input.
• powerline (jeremy) - Another take on a powerline theme. Nicely configurable, but requires at least a 256 color-capable terminal with a powerline-compatible terminal font.
• powerline (syui) - A git aware powerline theme.
• powerline-cute - Based on bullet-train.
• powerline-go - A beautiful and useful low-latency prompt, written in golang. Includes git and hg status decorations, exit status of the last command run, current Python virtualenv, whether you're in a nix shell, and is easy to extend.
• powerline-hs - A Powerline clone written in Haskell. It is significantly faster than the original implementation, and makes the shell noticeably more responsive.
• powerline-pills - Written in Ruby, uses powerline characters to simulate pills with useful information.
• powerline-shell (b-ryan) - Beautiful and useful prompt generator for Bash, ZSH, Fish, and tcsh. Includes git, svn, fossil and hg decorations, Python virtualenv information, and last command exit status.
• powerline-shell (banga) - A powerline-like prompt for Bash, ZSH and Fish. Includes decorators for git/svn/hg/fossil branch, last command exit status, shortened path to current directory and the current python virtualenv and is easy to customize/extend.
• powerline-train - A powerline variant.
• powerline - A Powerline-like prompt, based on powerline-bash. Displays virtualenv, git status information and the exit code of the last command run.
• powermore - Forked from powerless. Simple prompt that shows git status and current directory.
• powerzeesh - A Powerline based ZSH theme. It aims for simplicity, showing information only when it's relevant, optimized for speed and look. Inspired by Agnoster and Powerline.
• pre - A collection of themes for Sublime Text, Terminal, iTerm 2 and ZSH.
• predawn-shell - Theme optimized for dark terminal themes.
• prezto_powerline - Powerline for prezto. Shows git information, RVM version.
• prezto-cloud-prompt - Prezto port of oh-my-zsh's cloud prompt.
• prezto-lambda - Lambda theme (for prezto).
• princess - Modeled after abhiyan.zsh with perhaps a bit too much pink and arguably too few emojis. Includes decorators for current directory and git status.
• probe - Includes git status decorations.
• prompt_blocks - A minimal node js + git theme. Includes decorators for git status, node version and current directory.
• prompt_j2 - Has a dynamic exit status indicator, can change to two lines dynamically to display context.
• prompt-powerline - A fairly heavyweight ZSH prompt, based on the powerline font from the popular eponymous vim plugin, which works well for a dark background.
• prompt - A lightweight prompt consistent across sh, dash, ash, zsh, and pwsh. Includes git status decorations.
• promptly - Lightweight, async ZSH theme for a prompt(ly) experience.
• promptor - Powerline-inspired. Includes decorators for git status, username, hostname, working directory and time.
• promptus - Simple, minimalist and configurable shell prompt program in C which can be used to make your prompt the same on any shell. Includes exit code and working directory decorations.
• pronto (arzezak) - A super simple prompt with decorators for the current directory and git information.
• pronto (jthat) - Simple and fast theme with git decorations and timing information.
• prowpt - Simple, lightweight, and customizable Powerline-like prompt, with decorators for git information, user, hostname, current directory, time and exit status of the last command.
• ps1.py - Has git status, truncated directory, chroot and virtualenv prompt decorations.
• pskfyi - Based on lambda. Themed for ubuntu but easily tweaked.
• punctual - Easily customizable, influenced by spaceship.
• pure-agnoster - Mashup of pure and agnoster. Has git decorations and works well with both dark and light terminal backgrounds.
• pure - A pretty, minimal and fast ZSH prompt. Includes git status decorations, prompt turns red if last command failed, username and host decorations when in a remote session or container, and current folder and command when a process is running.
• purify (banminkyoz) - A simple, fast & cool prompt.
• purify (kyoz) - A clean and vibrant theme, best on dark backgrounds. Includes git status decorations.
• purity - Inspired by the robbyrussell theme and the pure prompt.
• purpleblood - Based on darkblood. Includes decorators for username@host, git status, and current directory.
• purr - Includes decorators for current directory and git status.
• purs - A fast pure-inspired prompt written in Rust.
• pustelto - Colorful theme inspired by the Spaceship theme, includes git decorations.
• pwn - Includes decorators for user@host, git & hg status, ruby version, python virtualenv and current working directory.
• pyhack - Works well with dark terminal themes. Shows Python version, Python package version (pyproject.toml) and git current branch information.
• qi3ber2 - A dark multiline theme. Includes git, load average and exit code of last command decorators.
• qoomon - Optimized for dark backgrounds, includes git information. Theme repo includes iTerm 2 and Terminal color settings.
• quewui - Simple and clean theme optimized for dark terminal themes. Includes decorations for the current time, user, directory and git status.
• r3nic1e - Agnoster variant with battery status, git/hg status, time, kubernetes context and namespace, non-zero exit code of last command and date decorations. Requires Powerline font.
• rabbit - Optimized for git. Requires a terminal program that works with unicode. Includes decorators for git status, current working directory and the current virtual environment.
• racotecnic - Based on af-magic and posh-git.
• radius - Includes git status, username, hostname, and directory decorations, plus desk support.
• rafiki - Adds emojis to your ZSH terminal.
• ramiel - Fork of the node.
• random-emoji-robbyrussell - Based on random-emoji and robbyrussell themes.
• random-emoji - Random emoji.
• ranger-zoxide - Adds zoxide support to the ranger console file manager.
• raspberrysh - Includes git, python, time, current host and path decorations.
• raytek - Simple and colorful theme with git status decorations.
• raz - Minimal prompt, includes git status decorations.
• rb - Powerline-styled ZSH theme based on Agnoster, optimized for git and solarized terminals. Requires a Powerline-compatible font.
• rbjorklin - Optimized for solarized terminal color schemes, includes git status decorations.
• redline - Minimalist theme. Includes git status, time, user.
• refined-flower - Requires a terminal program that can handle emoji. Includes git status decorator.
• refpx - Includes git status, last command status, user@hostname and directory decorations.
• reggae - Compresses a lot of information into the prompt with color-coded status decorations.
• rei - A simple theme with the first character 零(rei), the number 0. Includes git status decorations.
• remiii - Based on Agnoster, optimized for solarized terminal themes.
• remolueoend - Based on Agnoster, using emojis for tracking git context. Only works with Prezto.
• renanborgez - Works well on dark backgrounds. Includes decorators for nvm and git information.
• rho - Minimalist theme. Includes decorators for git status, hostname and current directory.
• ribbon - Reminiscent of powerline. Includes Python virtualenv decorator.
• rigel - Includes decorators for git information, user@hostname and current directory.
• risbow - A risto inspired ZSH theme with a lolcat like rainbow effect.
• ritz - Includes decorators for time, current directory, git status, exit status and time used for last command run.
• river-dreams - Includes decorators for git information, machine's IP address, time, disk usage on /, current Python venv, current directory, root status, and the last command's exit status.
• river - Dark theme with git information.
• riverside - A more portable descendent of River Dreams inspired by robbyrussell and kafeitu. Includes decorators for git status, user@hostname, current directory and the current python virtual environment.
• rkj-logik - Based on omz's rkj. Includes decorators for user@host, current directory, time & date.
• rkj-with-conda - Based on omz's rkj and adds conda environment and git status decorators.
• robbyolivier - Based on ideas from the the robbyrussell theme and the project zsh-git-prompt.
• robbyrussell-fullpath - The original robbyrussell with a fullpath in the prompt.
• robbyrussell-plus - Based on robbyrussell, adds a hostname decorator.
• robbyrussell-WIP - Decorates the robbyrussell theme with output to indicate a WIP commit.
• rocket - Minimalist theme, includes git and hg status decoration.
• rougarou - A dark theme.
• rounded - Includes current directory and git status decorations.
• roundy - Fast, cute and roundy theme. Includes decorators for git status, current directory and last command execution time. Requires a Nerd Font and a unicode-capable terminal application.
• rs - Includes git decorations. Requires unicode capable terminal.
• rufus - Optimized for dark backgrounds.
• rummik - @rummik's theme. Supports psmin, and git status information in the prompt.
• russtone - Inspired by pure and sorin. Includes git status decorations.
• ruweird - Minimalist. Has decorators for git status and current directory. Shows an umbrella with raindrops and exit code of the last command if non-zero.
• rwahasugui - Includes decorators for git information, current time, current working directory and active python virtualenv.
• ryner - Colorful theme, includes git decorations and the current directory.
• rzh - Theme with git states indicated by emojis.
• s1ck3r - Sleek, transient and space-efficient. Includes decorators for vi-mode, elevated permissions, last command exit status, if background jobs are running, working directory and git status,
• s1ck94 - Fork of the (first deprecated, now extinct) minimal prompt by S1cK94. Shows whether user is root, background job status, vi-mode, exit status of last command, and git status decorations.
• s7c - Works well with dark backgrounds. Includes git status decorations.
• sailormoon - A collection of Sailor Moon themed themes.
• samshell - A minimalist ZSH theme with git, kubernetes and python virtualenv decorations.
• saraiva - Includes git status decorations, works well on a dark terminal background.
• sashimi - Includes decorators for git status and the exit status of the last command run.
• saturn - A soft & minimalistic prompt for those who love space and want to have a bit of it on their terminal, featuring cool emojis & highly customizable prompt elements (such as icons, colors, time format, and more).
• savior - Minimalist theme with decorators for current directory, exit status of last command run and git status.
• schminitz-v2 - Shows decorators for git status, user@host information, the exit status of last command, and whether running as root.
• schminitz - Shows if vim is running in the background when using :sh command.
• scythe - Powerline-reminiscent theme. Includes git, last command exit status and directory decorations.
• sdkman (matthieusb) - Add tab completions for sdkman.
• sdkman (yongxingzhao) - Add tab completions for sdkman.
• searocket - Slimmed down version of spaceship. Includes decorators for working directory, last command exit code, user, background jobs, bun, d, elm, go, nodejs, python, zig and git status. Requires D build chain.
• seashell - Minimal theme with sea-inspired emoji decorations. Includes git status decorations.
• seeker - This theme uses many special unicode characters to be fancy, but it may cause some problems without well supported fonts.
• seltzer - Inspired by the dieter theme, uses color-coding to provide information.
• senpai - Clean prompt theme for Devops. Includes decorators for git status, the kubernetes context, AWS profile, GCP project and Azure active cloud.
• sensa - Includes decorators for git status, GitHub username and current directory.
• sepshell - Clean and minimal ZSH theme based on the old lost taybalt theme, with git bisecting/merging/rebasing modes and configurable prompt symbols.
• seti_UX - A simple oh-my-zsh-compatible theme with a corresponding iTerm 2 color scheme.
• sfz - An evolution of lean prompt which itself is a rewrite of pure.
• shades of purple - Purple theme for Windows terminal that is reminiscent of powerline.
• shadow - Includes git status, directory, host name, username and time decorations.
• shayan - Simple theme with git status decorations.
• shelby - Fast, lightweight and minimal prompt written in pure golang. Includes decorations for last command exit status, git status and the current working directory.
• shellder - Minimal theme with a git branch decorator. Requires a Powerline-compatible font.
• shichi - A simple theme with the first character being 七(shichi/nana), the number 7. The primary color is red with a yellow accent. Includes git status decorations.
• shiftys - Tweaked version of the kali theme.
• shini - A tiny theme that just shouts out small. Includes directory, username, hostname, time and git decorations.
• shinkansen - A fast, customizable and easily extended theme. Includes decorators for rhw python version in the active virtualenv, current ruby version if you're using chruby, current Node.js version, current java version, current go version, current perl version if using chperl, current elixir version, git status, time, current directory, exit code and execution time of the last command, and an optional custom message. Requires a powerline-compatible font.
• shirnschall - Includes git status and user@hostname decorations.
• shiro (arturDobrowolski) - Includes decorators for current directory, git status, and exit status and execution time of last command run.
• shiro (shirozuki) - Includes decorators for current directory, git status and execution time and exit status of last command run.
• shocm - Forked from sixlive. Has git decorations.
• short-ys - Based on the ys theme. Includes git and hg status decorations.
• shrikant - Includes git decorations.
• shrug - Inspired by beer-theme, includes git status and current directory decorations.
• shuttle - Written in golang. Has decorators for OS, user, current directory, and the exit code of the last command run.
• siegerts - Includes git status decorations in right prompt.
• silver - A cross-shell customizable powerline-like prompt heavily inspired by Agnoster. A faster rust port of bronze. Requires Nerd Fonts. Very configurable, includes git status decorations.
• simpalt - An information-rich small-footprint theme for ZSH based on Agnoster.
• simpl - Minimalist theme focusing on elegance and simplicity. Decorators for root status, current directory and git status.
• simple (daopengz) - Works well with both light and dark terminal themes. Includes vcs, username and path decorations.
• simple (drNoob13) - Includes decorators for python virtual environment, git status and current directory.
• simple (pavdmyt) - Minimalist theme based on robbyrussel that embeds git status information in iTerm's window title bar instead of using space in the prompt.
• simple (rkitover) - A simple, lightweight, and nice looking prompt that runs quickly even in very slow shells like MSYS2, Cygwin and WSL. It shows decorations for the short name of the current environment (distribution, OS, etc.) the git branch when in a git checkout, as well as the last command exit status (green checkmark for success and red X mark for non-zero exit).
• simple (savecoders) - Simple and minimalist theme with git, username and execution status decorations.
• simple (tourcoder) - Minimalist prompt, includes git status decorations.
• simple (yhiraki) - Minimal prompt, doesn't require special fonts.
• simple-agnoster - Powerline-inspired simple theme with git decorations.
• simple-chack - Works well with solarized terminal color scheme. Includes git status decorations.
• simple-git - Minimalist theme inspired by gitstatus. Includes git decorations.
• simple-yet-beautiful - Minimalist theme. Includes git status and user@host prompt decorations.
• simplezsh - Minimal theme with git info display.
• simply-perfect - Reminiscent of Powerline and Bullettrain. Includes decorators for git status, current directory, last command exit status, current time and username.
• sinon - k-kinzal's sinon theme. Includes git status decorations.
• sit - Minimalist theme with git, command exit status and path decorations.
• sixlive - This theme has a unique directory listing. When inside a git project, the directory display is scoped to the current repository root.
• sk9 - Skeiter9's ZSH theme.
• skeletor-syntax - Theme collection for Atom, Prism and ZSH inspired by Skeletor from He-Man and the Masters of the Universe.
• skgeek - Includes decorators for hostname, directory and git branch.
• skiff - Lightweight ZSH theme with git status and current directory decorators.
• skill (asafaeirad) - Includes decorations for working directory, git working branch, working directory status and tracking branch status.
• skill (frontendmonster) - Optimized for a dark terminal, displays git status decorations.
• skull - Includes git status, python virtual environment and ruby rvm status decorations.
• sleeplessmind - ZSH theme inspired by gitster and odin.
• slick - Inspired by the pure, purs and zsh-efgit-prompt. Requires cargo for installation.
• slimline - Minimal, fast and elegant ZSH prompt. Displays the right information at the right time.
• sm - A Simplist & Minimalist theme for your favorite terminal. Includes git status decorations.
• smail - Includes decorators for git status, current directory and exit status of last command run.
• small-terminal-diy - A variant of the ys theme in oh-my-zsh.
• smelly - Minimalist prompt that includes decorators for Python venv and git status.
• smiley - A prompt with happy and sad faces.
• snowflake - An elegant, simple, and neat ZSH theme including an aesthetically pleasing cool color palette that harmonizes with dark themes.
• sobole - A minimalistic ZSH theme inspired by the old-fashioned hobbies. No verbose gimmicks, no emoji, no fidget spinners, and no other visual noise. Has both light and dark modes.
• softblobby - A theme for people who love unicorns, pink and purple. Includes decorators for git information, current directory, time and username.
• solarized-powerline (houjunchen) - Solarized powerline-style theme for ZSH.
• solarized-powerline (KuoE0) - Solarized powerline variant.
• solarizsh - Color fix for robbyrussell's oh-my-zsh theme to work with solarized terminals.
• sorin-modified-dark - Based on sorin. Minimalist, adds decorators for git status and current directory.
• spaceship - Theme with git, nvm, rvm/rbenv/chruby, python, ssh and other useful status decorators.
• spectere - Powerline-esque. Includes decorators for current directory, root status, and git status.
• spowerline - Written in scala, inspired by Agnoster, tmux powerline, vim powerline and the vim status plugin.
• spyrhoo - Includes time, git and current directory decorations.
• ssfprompt - Simple, slim, fast. Includes ssh, virtualenv and vcs decorations.
• staples - Based on bureau, displays user@host if connected through SSH.
• starboy - A simple ZSH theme.
• starship (wintermi) - A simple plugin to use the Starship prompt, along with a powerline theme.
• starship - Minimal, fast, extremely customizable.
• starship2k - Includes powerline support, decorators for git information, multiple languages and a multiline prompt.
• statusline - A responsive ZSH theme that provides informational segments when you need them.
• steef (danihodovic) - Oh-my-zsh steeef theme as a standalone repository. The purpose behind this repo is avoid having a dependency on oh-my-zsh when using the steeef theme. ZSH plugin managers such as Antibody can use the theme without having to use oh-my-zsh.
• steef (zelongguo) - Based on the zimfw steef theme. Includes decorators for username@hostname, python venv, git status and current directory. Requires git-info.
• steef (zimfw) - A customizable version of steeef's theme.
• steeple - Minimalist theme with git status decorations.
• stellachar - Minimal, pastels.
• stigmata - Includes decorators for user@host and current directory.
• sublime - A sublime, clean, minimalistic ZSH theme with git status decorations.
• sugar-free - Based on the Pure and Candy themes.
• sukeesh - Includes git status decorations. Works better on dark terminal backgrounds.
• sulfurium - The official ZSH theme of sulfuriumOS.
• sunrise-ruby - Similar to sunrise but includes the active Ruby version.
• sunrise - Includes decorators for battery status, current directory, date and time.
• superkolo - Add date and return status to the kolo theme.
• susi - Includes git status decorations and an accompanying iTerm2 color scheme.
• svs - Clean and distraction free theme with git status and current path decorations.
• sy - Based on ys, includes git status decorations.
• t2colorful - Includes decorators for git information, current directory, last command exit status, and current time.
• t2er - Minimalist theme with git decorations.
• tabaf - Minimal ZSH theme optimized for dark backgrounds.
• tarcadia - Based on jonathan. Includes decorators for current directory and git status.
• tcr - Minimalist theme, shows decorators for current directory, git status information & nvm version.
• temeraf - Minimalist theme with decorations for git status, timestamps and last exit status.
• tepig-ys - Includes git status decorations and conda/virtualenv status.
• termux - Minimalist theme.
• termuxer - Theme inspired by Agnoster and linuxer.
• thayne - Includes decorators for exit status of last command, time to run if > 1 second, current time, current directory and git status. Requires a Nerd Font.
• the-time-lord - A theme based on gallifrey.
• theme-line - Colorful theme with git status.
• themer - Includes multiple color scheme options, with git status decorators. There are also multiple icons to choose from within the .zsh-theme file. Based on strug.
• themeraf - Has decorators for username, last two directories in working directory path, git status, timestamp, last exit status and also name of active virtual environment.
• theozera - Includes decorators for git status, a truncated current directory, and the exit status of the last command run.
• theta-async - Async version of theta. Includes vcs status information.
• theta - Includes git and hg status decorations. Also has java, python, ruby, node, go and elixir version information.
• theto - Simplistic theme. Needs Nerd Fonts, includes vi-mode status and git decorations.
• thetraveler - Inspired by theunraveler, uses symbols to display git status.
• thm - Includes decorators for virtualenv, current directory and git status.
• thnikk - A minimal version of the spaceship theme.
• tho - Includes decorators for git status & current directory.
• thygod - Based off gnzh and bira. Includes a git status decorator and changes prompt to a red cross when a command fails.
• thyme (chenhao-ye) - Seasoning for shells. Based on bira, gnzh, and bullet-train.
• thyme (kawamurakazushi) - Simple theme with git status decorations.
• toledo - Quick minimalist theme with git status decorations. Works with zsh, bash, dash and yash.
• tonni4 - Includes time and git status decorators.
• topan - Includes git information; best on dark backgrounds.
• tq - Displays git status, time, requires a Powerline font.
• traffic - A dark theme for ZSH.
• trajan - A dark theme for ZSH.
• trinity - A simple theme based on geometry. Includes git decorations.
• tron - Includes git status, working directory, time, user@host and return status of last command decorations.
• troopert - Includes decorators for git status, last return code if non-zero, full pwd and a configurable display of $RPROMPT.
• tsotra - Minimalist theme, includes decorators for git status, k8s context, and rvm status.
• turs - Fast, minimal Purs-inspired prompt.
• tvline - Derived from the agnoster theme, adds powerline font enhancements.
• twilight - Minimalist, but includes last command exit status, git status and user@hostname decorations.
• type0 - Inspired by classyTouch by yarisgutierrez. Includes git decorations.
• typewritten - Minimal and informative theme that leaves room for what's important. Does asynchronous git decoration updates for speed.
• ubunly - Mimics the Kali Linux console. Note - this theme also rebinds a lot of keys and sets a bunch of ZSH options that themes should leave alone.
• ubuntu-ish - Mimics the default Debian/Ubuntu bash prompt.
• ubuntu-with-vitamins - Mimics the default Ubuntu prompt, but with git decorations.
• ubuntu - Minimal theme, includes git status decorations.
• ultima - Minimalist, includes git status and current directory decorators.
• ultimate - Minimalist theme with decorators for git status, vim mode indicator and shortened path.
• ultimator - Agnoster-like theme. Includes decorators for current directory, user@host, python virtualenv, background jobs, last command exit status, and git status information. Requires zsh-git-prompt plugin and Nerdfonts.
• ulyssesys - Has decorators for full path to current directory, exit code of last command and git status.
• unicorn - Includes decorators for root status, virtualenv, nvm, rvm, current directory, the time, current directory and emoji git information. Inspired by wild cherry.
• unit-1 - Minimalist theme with ITWTB colors.
• userandnode - A clean theme with decorators for username, node version, current directory, and git info.
• valuca - Variant of ducula. Includes decorators for background job status, username, hostname, virtualenv, current directory, last command's exit code, git information and the current time.
• vanan - Minimalist theme with git information for dark terminals.
• vehemence - Includes decorators for pwd, user@host, tty, time, last command exit code and git status.
• velvet - Includes decorators for git status, username, current directory, exit status of last command, and the time.
• vercel - Minimalist theme with git status decorations.
• vertepommes - Based on ys. Includes vcs status, username and current directory decorations.
• vinhnx - Modified from mgutz. Looks great when using with a Solarized color scheme.
• vitesse - Inspired by VS Code's Vitesse theme. Includes git status decorations.
• voidy - Borrows elements from lambda and robbyrussell themes and adds the active aws-vault profile to the right side of the prompt.
• vszambon-ocean - Includes decorators for current directory, git status, a day/night icon, whether or not it is running inside a docker container and the date and time.
• vtex - Includes decorators for git status, current directory, vtex account and vtex workspace.
• vulcan - Minimal theme reminiscent of the default bash theme. Includes git decorations.
• wade - Mashup of the popular ZSH themes Agnoster and Fishy, with some visual tweaks.
• wang-iterm - Based on the 0532 theme.
• warm-colours - Includes decorators for user@host, current directory and datetime.
• warmblood - Based on darkblood. Includes decorators for git information, user@hostname and the current directory.
• whale - Fast reimplementation of the whale theme.
• whales - Includes decorators for git status, java version, last command return status, and directory.
• wild-cherry - A fairy-tale inspired theme for ZSH, iTerm 2, Sublime, Atom, & Mou.
• windows - Inspired by the Windows Command Prompt. Includes a decorator for the current directory.
• winline - Async version of Greg Hurrell's prompt. Includes decorators for git status, duration of last command, current directory, nested shells, root status.
• wkentaro - A simple theme for Python users. Includes virtualenv and git status decorators.
• work-line - Theme with nice emojis.
• workbench - Includes git status decorations, working directory, exit status of last command and current virtualenv.
• wormwood - Includes decorators for last command exit status, current directory and git status.
• x - Includes customizable banners
• xandermute - Minimalist theme with git and current directory decorations.
• xavi - Modified version of the gnzh theme with emoji decorations for git status and current directory.
• xbira - Based on bira, includes decorators for git status, user@hostname, exit status of last command run and the current directory.
• xlk-simple - Simple theme with git decorations.
• xm - Theme for dark terminals. Has git decorations.
• xor - Self described as minimalistic and 'feature-poor', includes git decorations.
• xremix - An oh-my-zsh shell theme based on the Jreese theme plugin.
• xris47 - Fast, simple and streamlined theme. Works best with tmux and vim-airline.
• xxf - Shows the current git commit's shortened hash and message.
• yairshefi - Minimal theme with line separated prompts. Based on the robbyrussell theme.
• yazpt - A clean, fast, good-looking ZSH prompt theme that thoughtfully incorporates Git/Subversion/TFVC status info, integrates with popular plugin managers like Oh My Zsh, and is straightforward to customize and extend.
• yechen - Minimalist theme with git status decorations.
• yeet - Minimalist prompt with git status decorations.
• yellow-sea-diamonds - Includes decorations for git status, current directory, active python virtual environment, and the exit status of the last command run.
• yindev - Variant of gndx. Includes decorations for git status and current directory.
• ykmam - Modified from ys theme and optimized for a dark background.
• ys-cluster - ys variant with support for working with batch submission systems for large clusters. Supports Slurm, LSF / IBM Spectrum LSF, and PBS.
• ys - Clean, simple, compatible and meaningful theme meant for dark backgrounds.
• ysm - Simple ZSH theme with git status information.
• ysr - Based on ys. Includes git status decorations.
• yuki - A dark optimized ZSH theme.
• yuyuko - Fork of ys, inspired by yuyuko.vim.
• yyl-ys - Includes conda and venv status.
• yz50 - Colorful, based off of robbyrussell and crunch themes. Includes git status decorations.
• z4rr3t - Based on sindresorhus' pure theme.
• zap-robbyrussell - The OMZ robbyrussell theme, patched to add compatibility with zap.
• zcmder - inspired by Cmder with decorators for git information, current directory and root status.
• zcraft - Minimalist theme with decorations for git status, last command exit status and the time taken by the last command.
• zeit - Optimized for dark backgrounds, includes git status information.
• zelda - Zelda-inspired theme. Includes git status decorations.
• zemm-blinks - Customized version of oh-my-zsh blinks with mercurial support and other changes.
• zemoji - Based on wild-cherry. Includes exit status, virtualenv, nvm, rvm and git status decorations.
• zen - A minimalist theme for *NIX systems. Includes decorators for execution time of last command run, curreent directory and vcs status information.
• zenith - Minimalist. Includes decorators for username, current directory and git status.
• zero (arlimus) - Zero's theme & plugin. Has variants for both light and dark terminal backgrounds.
• zero (shirozuki) - Minimalistic prompt with decorators for git status, current directory, exit status and time to execute of last command run.
• zeroastro - Works best on dark backgrounds, includes git status decorations.
• zerocake - Works better on dark brackgrounds.
• zest - A functional theme for ZSH. Influenced by zsh2000, agnoster and powerline themes.
• zeta - Shows decorations for username, git status information, machine name, the current working directory and success/fail status of last command.
• zhiyin - Includes decorators for user @ host, current working directory and git status information.
• zido - Includes decorators for git status and current directory.
• zinc - A blazing-fast, pure ZSH, mixed asynchronous prompt inspired by Powerlevel9k and Agnoster that's easily extensible and extremely configurable. It supports async segments using zsh-async.
• zish - Based on the fish shell's default look.
• zlambda - Minimalist, includes git decorations without special font requirements.
• zodiac - Includes an emoji for the animal corresponding to the current year.
• zoo - Casual theme with animal emoji. Includes decorators for current directory, time and git status.
• zp - Fast prompt, written in zig. Includes git status and current directory decorators.
• zprompts - Themes (prompts) that use original zsh theming subsystem.
• zqt - Modified version of oh-my-zsh's maran theme.
• zsh1999 - Includes network connectivity, battery and git status decorations.
• zsh2000 - Theme which resembles Powerline and includes the rvm prompt, git status and branch, current time, user, hostname, pwd, exit status, whether running as root and background job status.
• zsh313 - Minimal theme with git status decorations.
• zshcomrade - A ZSH theme, comrade! Includes git status decorations.
• zshify - A minimalistic, one command installation to customize your prompt. Requires npx.
• zshiggy - Includes decorators for git status, node.js version.
• zshpower - Optimized for python developers. Includes git and pyenv status decorations, username and host. Tries to install other plugins and fonts, so read its instructions before installing.
• zshred - Shows current directory, git decorations, exit status of last command and time.
• zskai - Simple theme based on Monokai. Includes decorators for user@hostname, time, git status and current working directory.
• zunder - Simple and fast ZSH prompt based on gitstatus.
• zwsh - A Zpm3/Wordstar mode/theme for ZSH.
• zys - Similar to Agnoster, designed to disclose information contextually, with a powerline aesthetic.
• zzshell - Inspired by the default Oh-My-Zsh theme. Displays exit code and git status decorations. Doesn't require Powerline fonts.

Fonts

Some of the themes listed here require Powerline-compatible fonts, here are a few:

• Awesome Terminal Fonts - A family of fonts that includes some nice monospaced Icons.
• Fantasque Awesome Font - A nice monospaced font, patched with Font-Awesome, Octoicons and Powerline-Glyphs.
• Fantasque-sans - Another Powerline-compatible font.
• Hack - Another Powerline-compatible font designed specifically for source code.
• Input Mono - A family of fonts designed specifically for code. It offers both monospaced and proportional fonts and includes powerline glyphs.
• Iosevka - Coders' typeface, built from code. Highly customizable.
• Monoid - Monoid is customizable and optimized for coding with bitmap-like sharpness at 15px line-height even on low res displays.
• Nerd Fonts - Collection of over 20 patched fonts (over 2,000 variations) & FontForge font patcher python script for Powerline, Font Awesome, Octicons, Devicons, and Vim Devicons. Includes: Droid Sans, Meslo, Source Code, AnonymousPro, Hack, ProFont, Inconsolata, and many more.
• Powerline patched font collection - A collection of a dozen or so fonts patched to include powerline gylphs.
• Terminus - TTF version of Terminus that includes powerline glyphs.

Installation

I recommend zgenom if you don't already have a preferred ZSH framework. It adds minimal overhead during shell session startup because it generates a load script only when you change your plugin list, and that load script is sourced during startup instead of being recalculated every time.

Antigen

Most of these plugins can be installed by adding antigen bundle githubuser/reponame to your .zshrc file. Antigen will handle cloning the plugin for you automatically the next time you start zsh. You can also add the plugin to a running ZSH with antigen bundle githubuser/reponame for testing before adding it to your .zshrc.

dotzsh

1. Clone new plugins into .zsh.local/modules
2. Load the plugin module in .zshrc
3. Open a new ZSH terminal window or tab

Oh-My-Zsh

1. cd ~/.oh-my-zsh/custom/plugins
2. git clone repo
3. Add the repo to your plugin list

Prezto

1. Clone the plugin into your prezto modules directory
2. Add the plugin to your .zpreztorc file
3. Open a new terminal window or tab

Zgen

Zgen is not being actively maintained. I recommend that you switch to the Zgenom fork, which is.

Zgenom

Most of these plugins can be installed by adding zgenom load githubuser/reponame to your .zshrc file in the same function you're doing your other zgenom load calls in.

Zgenom will automatically clone the plugin repositories for you when you do a zgenom save.

zplug

Most of these plugins can be installed by adding zplug "githubuser/reponame" to your .zshrc file.

zpm

Most of these plugins can be installed by adding zpm load "githubuser/reponame" to your .zshrc file.

Writing New Plugins and Themes

I've documented some recommendations for writing new plugin and themes here.

There is also a more detailed Zsh Plugin Standard.

Other Resources

ZSH Tools

• argcomplete - Generates tab completions for programs using Python's argparse module.
• crazy-complete - Every program should have autocompletion in the shell to enhance user experience and productivity. crazy-complete helps solve this task by generating robust and reliable autocompletion scripts.
• manpage-completion-generator - Generats ZSH completions from man pages. Requires create_manpage_completions.py which is installed by the fish shell
• oh-plugin - Helps you install plugins for oh-my-zsh by typing oh-plugin install repository_address.
• shell-color-prompt-tool - Helps you create a custom prompt for ZSH or bash.
• shellSpec - A full-featured BDD unit testing framework for dash, bash, ksh, ZSH and all POSIX shells.
• shtab - Automatically generate shell tab completion scripts for Python CLI apps, supports zsh, bash and tcsh.
• zsh-ai-completions - AI-generated ZSH completions
• zsh-bench - A benchmark for interactive ZSH. It measures user-visible latency of interactive zsh: input lag, command lag, etc.
• zshdb - A ZSH debugger.
• zshelldoc - Doxygen for shell scripts. Parses ZSH and Bash scripts, outputs Asciidoc document with function lists, call trees, lists of exported variables, and more.
• zunit - A powerful unit testing framework for ZSH.

Other Useful Lists

• awesome-devenv - A curated list of awesome tools, resources and workflow tips making an awesome development environment.
• awesome-sysadmin - A curated list of awesome open source sysadmin resources.
• Terminals Are Sexy - A curated list for CLI lovers.

Find other useful awesome-* lists at the awesome collection

Other References

• The ZSH Reference Card and zsh-lovers site are indispensable.

• Mastering ZSH is a great tutorial that builds on the basics to show you advanced ZSH usage, customizations, and practical examples.

Thanks

Many thanks to all the contributors over the years. The list wouldn't be nearly as complete without all your help.

Made with contributors-img.