Add the basic structure of launch view

src/gui.rs

@@ -9,12 +9,13 @@ use egui::{Align, Color32, FontFamily, FontId, Key, Layout, Modifiers, Vec2};
 
 use mithril::telemetry::*;
 
-mod panels;
 mod fc_settings;
 mod map;
 mod maxi_grid;
 mod misc;
+mod panels;
 mod plot;
+mod plots;
 mod simulation_settings;
 mod tabs;
 mod theme;
@@ -34,6 +35,7 @@ pub struct Sam {
     data_source: Box<dyn DataSource>,
     tab: GuiTab,
     plot_tab: PlotTab,
+    launch_tab: LaunchTab,
     configure_tab: ConfigureTab,
     archive_window: ArchiveWindow,
 }
@@ -56,6 +58,7 @@ impl Sam {
 
         let plot_tab = PlotTab::init(&settings);
         let configure_tab = ConfigureTab::init();
+        let launch_tab = LaunchTab::init(&settings);
 
         egui_extras::install_image_loaders(ctx);
 
@@ -66,6 +69,7 @@ impl Sam {
             tab: GuiTab::Plot,
             plot_tab,
             configure_tab,
+            launch_tab,
 
             archive_window: ArchiveWindow::default(),
         }
@@ -151,7 +155,9 @@ impl Sam {
         }
 
         // Header containing text indicators and flight mode buttons
-        HeaderPanel::show(ctx, self.data_source.as_mut(), !self.archive_window.open);
+        if self.tab != GuiTab::Launch {
+            HeaderPanel::show(ctx, self.data_source.as_mut(), !self.archive_window.open);
+        }
 
         // Bottom status bar
         egui::TopBottomPanel::bottom("bottombar").min_height(30.0).show(ctx, |ui| {
@@ -167,12 +173,12 @@ impl Sam {
                 });
 
                 // ... and the current tab some space on the right.
-                ui.allocate_ui_with_layout(ui.available_size(), Layout::right_to_left(Align::Center), |ui| {
-                    match self.tab {
-                        GuiTab::Launch => {}
-                        GuiTab::Plot => self.plot_tab.bottom_bar_ui(ui, self.data_source.as_mut()),
-                        GuiTab::Configure => {}
-                    }
+                ui.allocate_ui_with_layout(ui.available_size(), Layout::right_to_left(Align::Center), |ui| match self
+                    .tab
+                {
+                    GuiTab::Launch => {}
+                    GuiTab::Plot => self.plot_tab.bottom_bar_ui(ui, self.data_source.as_mut()),
+                    GuiTab::Configure => {}
                 });
             });
         });
@@ -181,7 +187,7 @@ impl Sam {
         egui::CentralPanel::default().show(ctx, |ui| {
             ui.set_enabled(!self.archive_window.open);
             match self.tab {
-                GuiTab::Launch => {}
+                GuiTab::Launch => self.launch_tab.main_ui(ui, self.data_source.as_mut()),
                 GuiTab::Plot => self.plot_tab.main_ui(ui, self.data_source.as_mut()),
                 GuiTab::Configure => {
                     let changed = self.configure_tab.main_ui(ui, self.data_source.as_mut(), &mut self.settings);

src/gui/plots/accelerometer_plot.rs

@@ -0,0 +1,16 @@
+use std::{cell::RefCell, rc::Rc};
+
+use crate::gui::plot::{PlotState, SharedPlotState};
+
+use super::color_constants::*;
+
+pub fn accelerometer_plot(shared_plot: &Rc<RefCell<SharedPlotState>>) -> PlotState {
+    let accelerometer_plot = PlotState::new("Accelerometers", (Some(-10.0), Some(10.0)), shared_plot.clone())
+        .line("Accel 2 (X) [m/s²]", R1, |vs| vs.accelerometer2.map(|a| a.x))
+        .line("Accel 2 (Y) [m/s²]", G1, |vs| vs.accelerometer2.map(|a| a.y))
+        .line("Accel 2 (Z) [m/s²]", B1, |vs| vs.accelerometer2.map(|a| a.z))
+        .line("Accel 1 (X) [m/s²]", R, |vs| vs.accelerometer1.map(|a| a.x))
+        .line("Accel 1 (Y) [m/s²]", G, |vs| vs.accelerometer1.map(|a| a.y))
+        .line("Accel 1 (Z) [m/s²]", B, |vs| vs.accelerometer1.map(|a| a.z));
+    accelerometer_plot
+}

src/gui/plots/altitude_plot.rs

@@ -0,0 +1,14 @@
+use std::{cell::RefCell, rc::Rc};
+
+use crate::gui::plot::{PlotState, SharedPlotState};
+
+use super::color_constants::*;
+
+pub fn altitude_plot(shared_plot: &Rc<RefCell<SharedPlotState>>) -> PlotState {
+    let altitude_plot = PlotState::new("Altitude (ASL)", (None, None), shared_plot.clone())
+        .line("Altitude (Ground) [m]", BR, |vs| vs.altitude_ground_asl)
+        .line("Altitude (Baro) [m]", B1, |vs| vs.altitude_baro)
+        .line("Altitude [m]", B, |vs| vs.altitude_asl)
+        .line("Altitude (GPS) [m]", G, |vs| vs.altitude_gps_asl);
+    altitude_plot
+}

src/gui/plots/barometer_plot.rs

@@ -0,0 +1,12 @@
+use std::{cell::RefCell, rc::Rc};
+
+use crate::gui::plot::{PlotState, SharedPlotState};
+
+use super::color_constants::*;
+
+pub fn barometer_plot(shared_plot: &Rc<RefCell<SharedPlotState>>) -> PlotState {
+    let barometer_plot =
+        PlotState::new("Pressures", (None, None), shared_plot.clone())
+            .line("Barometer [bar]", C, |vs| vs.pressure_baro.map(|p| p / 1000.0));
+    barometer_plot
+}

src/gui/plots/color_constants.rs

@@ -0,0 +1,13 @@
+use egui::Color32;
+
+pub const R: Color32 = Color32::from_rgb(0xfb, 0x49, 0x34);
+pub const G: Color32 = Color32::from_rgb(0xb8, 0xbb, 0x26);
+pub const B: Color32 = Color32::from_rgb(0x83, 0xa5, 0x98);
+pub const R1: Color32 = Color32::from_rgb(0xcc, 0x24, 0x1d);
+pub const G1: Color32 = Color32::from_rgb(0x98, 0x97, 0x1a);
+pub const B1: Color32 = Color32::from_rgb(0x45, 0x85, 0x88);
+pub const O: Color32 = Color32::from_rgb(0xfa, 0xbd, 0x2f);
+pub const O1: Color32 = Color32::from_rgb(0xd6, 0x5d, 0x0e);
+pub const BR: Color32 = Color32::from_rgb(0x61, 0x48, 0x1c);
+// pub const P: Color32 = Color32::from_rgb(0xb1, 0x62, 0x86);
+pub const C: Color32 = Color32::from_rgb(0x68, 0x9d, 0x6a);

src/gui/plots/mod.rs

@@ -0,0 +1,12 @@
+pub mod accelerometer_plot;
+pub mod altitude_plot;
+pub mod barometer_plot;
+pub mod color_constants;
+pub mod orientation_plot;
+pub mod vertical_speed_plot;
+
+pub use accelerometer_plot::*;
+pub use altitude_plot::*;
+pub use barometer_plot::*;
+pub use orientation_plot::*;
+pub use vertical_speed_plot::*;

src/gui/plots/orientation_plot.rs

@@ -0,0 +1,18 @@
+use std::{cell::RefCell, rc::Rc};
+
+use crate::gui::plot::{PlotState, SharedPlotState};
+
+use super::color_constants::*;
+
+pub fn orientation_plot(shared_plot: &Rc<RefCell<SharedPlotState>>) -> PlotState {
+    let orientation_plot = PlotState::new("Orientation", (Some(-180.0), Some(540.0)), shared_plot.clone())
+        .line("Roll (Z) [°]", B, |vs| vs.euler_angles.map(|a| a.z))
+        .line("Pitch (X) [°]", R, |vs| vs.euler_angles.map(|a| a.x))
+        .line("Yaw (Y) [°]", G, |vs| vs.euler_angles.map(|a| a.y))
+        .line("Angle of Attack [°]", O, |vs| vs.angle_of_attack)
+        .line("Roll (True) (Z) [°]", B1, |vs| vs.true_euler_angles.map(|a| a.z))
+        .line("Pitch (True) (X) [°]", R1, |vs| vs.true_euler_angles.map(|a| a.x))
+        .line("Yaw (True) (Y) [°]", G1, |vs| vs.true_euler_angles.map(|a| a.y))
+        .line("Angle of Attack (True) [°]", O1, |vs| vs.true_angle_of_attack);
+    orientation_plot
+}

src/gui/plots/vertical_speed_plot.rs

@@ -0,0 +1,15 @@
+use std::{cell::RefCell, rc::Rc};
+
+use crate::gui::plot::{PlotState, SharedPlotState};
+
+use super::color_constants::*;
+
+pub fn vertical_speed_plot(shared_plot: &Rc<RefCell<SharedPlotState>>) -> PlotState {
+    let vertical_speed_plot = PlotState::new("Vert. Speed & Accel.", (None, None), shared_plot.clone())
+        .line("Vertical Accel [m/s²]", O1, |vs| vs.vertical_accel)
+        .line("Vertical Accel (Filt.) [m/s²]", O, |vs| vs.vertical_accel_filtered)
+        .line("Vario [m/s]", B, |vs| vs.vertical_speed)
+        .line("True Vertical Accel [m/s²]", G, |vs| vs.true_vertical_accel)
+        .line("True Vario [m/s]", B1, |vs| vs.true_vertical_speed);
+    vertical_speed_plot
+}