FlashForge-Dreamer-Cura-Definitions v1.0.1

Release 1.0.1

DISCLAIMER

All information is provided "as is", with no guarantee of
completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance, merchantability and
fitness for a particular purpose. I will not be liable to you or anyone else for any decision made or action taken in reliance on the information given for any consequential, special or similar damages, even if advised of the possibility of such damages.

Installation Instructions

Please follow the below instructions to install this profile to Cura:

1. Download the latest release .zip from here.
2. Unzip the files into your Cura install directory:
   • Windows: "C:\Program Files\Ultimaker Cura {Version}\share\cura\resources"
   • MacOS: /Users/{Username}/Library/Application Support/cura/{Version}/
   • Linux: ~/.local/share/cura/{Version}
3. After unzipping, open Cura and select the printer under FlashForge > Dreamer

What's Changed

• Fixed issue with print temp being set to 0 if t0 is disabled. by @Artimidorus in #3
• Address dual extruder print area issue #2

New Contributors

• @Artimidorus made their first contribution in #3

Full Changelog: 1.0.0...1.0.1

FlashForge-Dreamer-Cura-Definitions v1.0.0

Release 1.0.0

DISCLAIMER

All information is provided "as is", with no guarantee of
completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance, merchantability and
fitness for a particular purpose. I will not be liable to you or anyone else for any decision made or action taken in reliance on the information given for any consequential, special or similar damages, even if advised of the possibility of such damages.

Installation Instructions

Please follow the below instructions to install this profile to Cura:

1. Download the latest release .zip from here.
2. Unzip the files into your Cura install directory:
   • Windows: "C:\Program Files\Ultimaker Cura {Version}\share\cura\resources"
   • MacOS: /Users/{Username}/Library/Application Support/cura/{Version}/
   • Linux: ~/.local/share/cura/{Version}
3. After unzipping, open Cura and select the printer under FlashForge > Dreamer

Full Changelog: https://github.com/tracedgod/FlashForge-Dreamer-Cura-Definitions/commits/1.0.0