Wemos D1 Mini (ESP8266) or Wemos ESP32 D1 Mini (ESP32) based universal shield for WLED firmware

Wi-Fi controller based on ESP-07S module with external antenna for WLED firmware.

LedBox V2 / V2.1 is a fully contained, sound reactive, ESP32 based module for controlling 5-12V addressable LED strips (WS281x, SK6812, etc.), supporting both 3-(VDD,DAT,GND) and 4-(VDD,DAT,CLK,GND) wire configuration.

cod.m WLED Controller (Wi-Fi/WLAN)

STM32 library for WS281x LED control.

Simple arduino implementation example direct control WS2812 LED strip driver via SPI bus

General-purpose LED strip controller for Android using Bluetooth Low Energy (BLE)

The software part of the Catharsis installation presented at Burnign Man 2019.

LedBox V3 is an ultimate, sound-reactive LED controller, compatible with 5-12V addressable LED strips (WS281x, SK6812, etc.), supporting 3-(data) and 4-(data/clock) wire signal protocols. Whether you prefer a plug-and-play solution, or you are a maker that loves tinkering with hardware, it offers the best of both worlds.

A TouchDesigner patch showing how to combine generated color data for use with RGBW and RGB pixel addressable WS2813/WS2815 and WS2814-RGBW LEDs running in the same DMX universe

Here you can find everything you need to know and have on hand to build your own ambient light for monitors.

Open Car Glow