I2C SHIM for Pico

tags: SLBLabs SLB Labs I2CSHIMForPico Raspberry Pi RaspberryPi Raspberry Pi Pico RaspberryPiPico RP2040 MicroPython CircuitPython Arduino C/C++

Quickly add I2C connectors to the Pico

I2C SHIM for Pico is a simple way to provide easy access to the I2C bus 0 and 1 on a Raspberry Pi Pico via two Qw/ST connectors.

Product Page

Order at:

• https://www.tindie.com/products/slblabs/i2c-shim-for-pico/
• [Coming Soon]

Features

• Dual Qwiic/StemmaQT connectors
  • Connector for I2C0 on GPIO 0 (SDA) and 1 (SCL).
  • Connector for I2C1 on GPIO 2 (SDA) and 3 (SCL).
• 3V3 Power line
  • Each connector is powered by the Pico regulated 3V3 line for a stable power supply.
• Staggered header pads
  • Header pads offset from the center line by 5 mils either direction.
  • Allows for a snug press-fit on the back of the Pico.
  • ※ Soldering is still advised.

^Top

---

I2C SHIM for Pico Rev 1.0 Overview

Front	Back
Panel Front	Panel Back

Schematic

^Top