Jaisekjames patch 1 (#368)

Fix for below issue. testing needed.
#363

SheetMetalBendSolid.py

@@ -229,18 +229,36 @@ def bend_solid(sel_face, sel_edge, bend_r, thickness, neutral_radius, axis, flip
 
  face_elt = shape.Face1
 
- wrapped_faces = wrap_face(
-  sel_face, neutral_radius, axis, normal, zero_vert, center, zero_vert_normal
- )
- edge_list = Part.__sortEdges__(wrapped_faces)
+ outWire = sel_face.OuterWire
+ #Part.show(outWire, "outWire") 
+ wrap_wire = wrap_face(outWire, neutral_radius, axis, normal, zero_vert, center, zero_vert_normal)
+ edge_list = Part.__sortEdges__(wrap_wire)
  wire = Part.Wire(edge_list)
- next_face = Part.Face(face_elt.Surface, wire)
- next_face.validate()
- next_face.check(True) # No output = good
-
- if not flipped:
- bent_solid = next_face.makeOffsetShape(thickness, 0.0, fill=True)
+ #Part.show(myWire, "myWire")
+ OuterFace = Part.Face(face_elt.Surface, wire)
+ #f.check(True)
+ OuterFace.validate()
+ #Part.show(OuterFace, "OuterFace")
+ OuterFace.check(True) # No output = good
+ #Part.show(OuterFace, "OuterFace")
+ for fWire in sel_face.Wires :
+ if not(outWire.isEqual(fWire)) :
+ wrap_wire = wrap_face(fWire, neutral_radius, axis, normal, zero_vert, center, zero_vert_normal)
+ edge_list = Part.__sortEdges__(wrap_wire)
+ wire = Part.Wire(edge_list)
+ #Part.show(myWire, "myWire")
+ InnerFace = Part.Face(face_elt.Surface, wire)
+ #f.check(True)
+ InnerFace.validate()
+ #Part.show(InnerFace, "InnerFace")
+ InnerFace.check(True) # No output = good
+ #Part.show(InnerFace, "InnerFace")
+ OuterFace = OuterFace.cut(InnerFace)
+
+ if not(flipped) :
+ bent_solid = OuterFace.makeOffsetShape(thickness, 0.0, fill = True)
  else:
- bent_solid = next_face.makeOffsetShape(-thickness, 0.0, fill=True)
+ bent_solid = OuterFace.makeOffsetShape(-thickness, 0.0, fill = True)
+ #Part.show(bendsolid, "bendsolid")
 
  return bent_solid