Official Lua applications for DC/DS-24 transmitters. Applications should be located in the Apps folder of the internal SD card.
Complete Lua API description can be found here: http://www.jetimodel.com/en/DC-DS-24-Lua-API-1/
Based on Lua 5.3.1:
The transmitter runs at this configuration:
- MCU: STM32F439 @ 168MHz
- External memory: 8MB (1MB reserved for framebuffer and system resources)
- SD card support: Up to 32GB micro SDHC
- Audio playback: MP3 (44.1kHz, 32kHz), WAV (8kHz, 11kHz, 16kHz, 22.05kHz, 32kHz, 44.1kHz; Mono/Stereo)
- Vibration support: Left and right gimbal
- Automatic Trainer Switch - Switch between teacher and student automatically.
- Battery Monitor - A display telemetry widget that shows voltages of up to 6 LiPo cells (measured by MULi6S).
- Battery Voltage - A simplified telemetry widget that shows voltages of up to 6 LiPo cells (measured by MULi6S). It doesn't offer balancing information nor approx. discharged percentage.
- DC-24 Presentation - An application that can be run on Desktop and gives the user some basic features of the transmitter.
- Demos - List of all demos included in the official API documentation. Each application demonstrates several API functions.
- Preflight Check - Use this application as a preflight checklist, so that you will never forget any step necessary before flight. (Included in DC-24 SW version 4.10)
- Sensor Chart - A display telemetry widget that can display any telemetry variable into a chart. (Included in DC-24 SW version 4.10)
- Source Dumper - The app dumps compiled Lua chunks to files without debugging information (stripped down). Useful to shrink the app, reduce memory consumption, improve start-up time and prevent memory issues.
- Connect the transmitter to PC and establish a link via USB (the transmitter is registered as a mass-storage device).
- Open one of the folders from above (for example, if you want to install Battery Monitor, open the Battery Monitor folder here on Github).
- Copy all files from the selected folder into the Apps folder of your transmitter.
- Disconnect the transmitter and locate its menu Applications - User Applications.
- Select the application you want and activate it.