Avoid repeated os.SetEnv calls in container init. #1983
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
For containers with a large number of configured environment variables (>5000), os.SetEnv can make container creation take a much longer time than in normal circumstances. This is due to os.SetEnv locking and unlocking a mutex on every environment variable added. By removing the os.SetEnv calls during container creation, and instead controlling the list of environment variables manually, this overhead can be removed. Signed-off-by: Brandon Mabey <[email protected]>
AkihiroSuda
reviewed
Mar 16, 2020
|
|
||
| // Certain functions that are used later, such as exec.LookPath, require that the PATH | ||
| // environment variable is setup with the container's PATH. | ||
| os.Setenv("PATH", mappedEnv["PATH"]) |
There was a problem hiding this comment.
Could you be more specific? Wondering it may cause security issues.
There was a problem hiding this comment.
- This does not causes any security issues because this is what was done before the patch, too.
- This appears to be an error because
mappedEnv["PATH"]contains, for example,PATH=/usr/bin:/usr/sbin(rather than/usr/bin:/usr/sbin. As a result, the first PATH element will be wrong.
kolyshkin
reviewed
Jun 15, 2024
Comment on lines
+352
to
+353
| if _, ok := environmentMap["HOME"]; !ok { | ||
| environmentMap["HOME"] = "HOME" + "=" + execUser.Home |
There was a problem hiding this comment.
Instead, it's easier to just set HOME the old way (like it's done with PATH).
|
This looks interesting. Would be nice to add a benchmark. |
|
Did some quick benchmark with 5000 env vars, comparing Will carry this one. |
kolyshkin
added a commit
to kolyshkin/runc
that referenced
this pull request
Jun 24, 2024
Current implementation sets all the environment variables passed in Process.Env in the current process, then uses os.Environ to read those back. As pointed out in [1], this is slow, as runc calls os.Setenv for every variable, and there may be a few thousands of those. Looking into why it was implemented, I found commit 9744d72 and traced it to [2], which discusses the actual reasons. At the time were: - HOME is not passed into container as it is set in setupUser by os.Setenv and has no effect on config.Env; - there is no deduplication of environment variables. Yet it was decided to not go ahead with this patch, but later [3] was merged with the carry of this patch. Now, from what I see: 1. Passing environment to exec is way faster than using os.Setenv and os.Environment() (tests show ~20x faster in simple Go test, and 2x faster in real-world test, see below). 2. Setting environment variables in the runc context can result is ugly side effects (think GODEBUG). 3. Nothing in runtime spec says that the environment needs to be deduplicated, or the order of preference (whether the first or the last value of a variable with the same name is to be used). In C (Linux/glibc), the first value is used. In Go, it's the last one. We should probably stick to what we have in order to maintain backward compatibility. This patch: - switches to passing env directly to exec; - adds deduplication mechanism to retain backward compatibility; - sets PATH from process.Env in the current process; - adds HOME to process.Env if not set; - removes os.Clearenv call as it's no longer needed. The benchmark added by the previous commit shows 2x improvement: name old time/op new time/op delta ExecInBigEnv-20 60.2ms ± 2% 27.4ms ±20% -54.42% (p=0.000 n=8+9) The remaining questions are: - are there any potential regressions (for example, from not setting values from process.Env to the current process); - should deduplication show warnings (maybe promoted to errors later); - whether a default for PATH (e.g "/bin:/usr/bin" should be added, when PATH is not set. [1] opencontainers#1983 [2] docker-archive/libcontainer#418 [3] docker-archive/libcontainer#432 Signed-off-by: Kir Kolyshkin <[email protected]>
kolyshkin
added a commit
to kolyshkin/runc
that referenced
this pull request
Jun 24, 2024
The current implementation sets all the environment variables passed in Process.Env in the current process, one by one, then uses os.Environ to read those back. As pointed out in [1], this is slow, as runc calls os.Setenv for every variable, and there may be a few thousands of those. Looking into how os.Setenv is implemented, it is indeed slow, especially when cgo is enabled. Looking into why it was implemented, I found commit 9744d72 and traced it to [2], which discusses the actual reasons. At the time were: - HOME is not passed into container as it is set in setupUser by os.Setenv and has no effect on config.Env; - there is no deduplication of environment variables. Yet it was decided to not go ahead with this patch, but later [3] was merged with the carry of this patch. Now, from what I see: 1. Passing environment to exec is way faster than using os.Setenv and os.Environment() (tests show ~20x faster in simple Go test, and 2x faster in real-world test, see below). 2. Setting environment variables in the runc context can result is ugly side effects (think GODEBUG). 3. Nothing in runtime spec says that the environment needs to be deduplicated, or the order of preference (whether the first or the last value of a variable with the same name is to be used). In C (Linux/glibc), the first value is used. In Go, it's the last one. We should probably stick to what we have in order to maintain backward compatibility. This patch: - switches to passing env directly to exec; - adds deduplication mechanism to retain backward compatibility; - sets PATH from process.Env in the current process; - adds HOME to process.Env if not set; - removes os.Clearenv call as it's no longer needed. The benchmark added by the previous commit shows 2x improvement: name old time/op new time/op delta ExecInBigEnv-20 60.2ms ± 2% 27.4ms ±20% -54.42% (p=0.000 n=8+9) The remaining questions are: - are there any potential regressions (for example, from not setting values from process.Env to the current process); - should deduplication show warnings (maybe promoted to errors later); - whether a default for PATH (e.g "/bin:/usr/bin" should be added, when PATH is not set. [1]: opencontainers#1983 [2]: docker-archive/libcontainer#418 [3]: docker-archive/libcontainer#432 Signed-off-by: Kir Kolyshkin <[email protected]>
|
Closing in favor of #4325 |
kolyshkin
added a commit
to kolyshkin/runc
that referenced
this pull request
Jun 27, 2024
The current implementation sets all the environment variables passed in Process.Env in the current process, one by one, then uses os.Environ to read those back. As pointed out in [1], this is slow, as runc calls os.Setenv for every variable, and there may be a few thousands of those. Looking into how os.Setenv is implemented, it is indeed slow, especially when cgo is enabled. Looking into why it was implemented, I found commit 9744d72 and traced it to [2], which discusses the actual reasons. At the time were: - HOME is not passed into container as it is set in setupUser by os.Setenv and has no effect on config.Env; - there is no deduplication of environment variables. Yet it was decided to not go ahead with this patch, but later [3] was merged with the carry of this patch. Now, from what I see: 1. Passing environment to exec is way faster than using os.Setenv and os.Environment() (tests show ~20x faster in simple Go test, and 2x faster in real-world test, see below). 2. Setting environment variables in the runc context can result is ugly side effects (think GODEBUG). 3. Nothing in runtime spec says that the environment needs to be deduplicated, or the order of preference (whether the first or the last value of a variable with the same name is to be used). In C (Linux/glibc), the first value is used. In Go, it's the last one. We should probably stick to what we have in order to maintain backward compatibility. This patch: - switches to passing env directly to exec; - adds deduplication mechanism to retain backward compatibility; - sets PATH from process.Env in the current process; - adds HOME to process.Env if not set; - removes os.Clearenv call as it's no longer needed. The benchmark added by the previous commit shows 2x improvement: > name old time/op new time/op delta > ExecInBigEnv-20 61.7ms ± 4% 24.9ms ±14% -59.73% (p=0.000 n=10+10) The remaining questions are: - are there any potential regressions (for example, from not setting values from process.Env to the current process); - should deduplication show warnings (maybe promoted to errors later); - whether a default for PATH (e.g "/bin:/usr/bin" should be added, when PATH is not set. [1]: opencontainers#1983 [2]: docker-archive/libcontainer#418 [3]: docker-archive/libcontainer#432 Signed-off-by: Kir Kolyshkin <[email protected]>
kolyshkin
added a commit
to kolyshkin/runc
that referenced
this pull request
Jun 27, 2024
The current implementation sets all the environment variables passed in Process.Env in the current process, one by one, then uses os.Environ to read those back. As pointed out in [1], this is slow, as runc calls os.Setenv for every variable, and there may be a few thousands of those. Looking into how os.Setenv is implemented, it is indeed slow, especially when cgo is enabled. Looking into why it was implemented, I found commit 9744d72 and traced it to [2], which discusses the actual reasons. At the time were: - HOME is not passed into container as it is set in setupUser by os.Setenv and has no effect on config.Env; - there is no deduplication of environment variables. Yet it was decided to not go ahead with this patch, but later [3] was merged with the carry of this patch. Now, from what I see: 1. Passing environment to exec is way faster than using os.Setenv and os.Environment() (tests show ~20x faster in simple Go test, and 2x faster in real-world test, see below). 2. Setting environment variables in the runc context can result is ugly side effects (think GODEBUG). 3. Nothing in runtime spec says that the environment needs to be deduplicated, or the order of preference (whether the first or the last value of a variable with the same name is to be used). In C (Linux/glibc), the first value is used. In Go, it's the last one. We should probably stick to what we have in order to maintain backward compatibility. This patch: - switches to passing env directly to exec; - adds deduplication mechanism to retain backward compatibility; - sets PATH from process.Env in the current process; - adds HOME to process.Env if not set; - removes os.Clearenv call as it's no longer needed. The benchmark added by the previous commit shows 2x improvement: > name old time/op new time/op delta > ExecInBigEnv-20 61.7ms ± 4% 24.9ms ±14% -59.73% (p=0.000 n=10+10) The remaining questions are: - are there any potential regressions (for example, from not setting values from process.Env to the current process); - should deduplication show warnings (maybe promoted to errors later); - whether a default for PATH (e.g "/bin:/usr/bin" should be added, when PATH is not set. [1]: opencontainers#1983 [2]: docker-archive/libcontainer#418 [3]: docker-archive/libcontainer#432 Signed-off-by: Kir Kolyshkin <[email protected]>
kolyshkin
added a commit
to kolyshkin/runc
that referenced
this pull request
Jul 3, 2024
The current implementation sets all the environment variables passed in Process.Env in the current process, one by one, then uses os.Environ to read those back. As pointed out in [1], this is slow, as runc calls os.Setenv for every variable, and there may be a few thousands of those. Looking into how os.Setenv is implemented, it is indeed slow, especially when cgo is enabled. Looking into why it was implemented, I found commit 9744d72 and traced it to [2], which discusses the actual reasons. At the time were: - HOME is not passed into container as it is set in setupUser by os.Setenv and has no effect on config.Env; - there is no deduplication of environment variables. Yet it was decided to not go ahead with this patch, but later [3] was merged with the carry of this patch. Now, from what I see: 1. Passing environment to exec is way faster than using os.Setenv and os.Environment() (tests show ~20x faster in simple Go test, and 2x faster in real-world test, see below). 2. Setting environment variables in the runc context can result is ugly side effects (think GODEBUG). 3. Nothing in runtime spec says that the environment needs to be deduplicated, or the order of preference (whether the first or the last value of a variable with the same name is to be used). In C (Linux/glibc), the first value is used. In Go, it's the last one. We should probably stick to what we have in order to maintain backward compatibility. This patch: - switches to passing env directly to exec; - adds deduplication mechanism to retain backward compatibility; - sets PATH from process.Env in the current process; - adds HOME to process.Env if not set; - removes os.Clearenv call as it's no longer needed. The benchmark added by the previous commit shows 2x improvement: > name old time/op new time/op delta > ExecInBigEnv-20 61.7ms ± 4% 24.9ms ±14% -59.73% (p=0.000 n=10+10) The remaining questions are: - are there any potential regressions (for example, from not setting values from process.Env to the current process); - should deduplication show warnings (maybe promoted to errors later); - whether a default for PATH (e.g "/bin:/usr/bin" should be added, when PATH is not set. [1]: opencontainers#1983 [2]: docker-archive/libcontainer#418 [3]: docker-archive/libcontainer#432 Signed-off-by: Kir Kolyshkin <[email protected]>
kolyshkin
added a commit
to kolyshkin/runc
that referenced
this pull request
Jul 12, 2024
The current implementation sets all the environment variables passed in Process.Env in the current process, one by one, then uses os.Environ to read those back. As pointed out in [1], this is slow, as runc calls os.Setenv for every variable, and there may be a few thousands of those. Looking into how os.Setenv is implemented, it is indeed slow, especially when cgo is enabled. Looking into why it was implemented, I found commit 9744d72 and traced it to [2], which discusses the actual reasons. At the time were: - HOME is not passed into container as it is set in setupUser by os.Setenv and has no effect on config.Env; - there is no deduplication of environment variables. Yet it was decided to not go ahead with this patch, but later [3] was merged with the carry of this patch. Now, from what I see: 1. Passing environment to exec is way faster than using os.Setenv and os.Environment() (tests show ~20x faster in simple Go test, and 2x faster in real-world test, see below). 2. Setting environment variables in the runc context can result is ugly side effects (think GODEBUG). 3. Nothing in runtime spec says that the environment needs to be deduplicated, or the order of preference (whether the first or the last value of a variable with the same name is to be used). In C (Linux/glibc), the first value is used. In Go, it's the last one. We should probably stick to what we have in order to maintain backward compatibility. This patch: - switches to passing env directly to exec; - adds deduplication mechanism to retain backward compatibility; - sets PATH from process.Env in the current process; - adds HOME to process.Env if not set; - removes os.Clearenv call as it's no longer needed. The benchmark added by the previous commit shows 2x improvement: > name old time/op new time/op delta > ExecInBigEnv-20 61.7ms ± 4% 24.9ms ±14% -59.73% (p=0.000 n=10+10) The remaining questions are: - are there any potential regressions (for example, from not setting values from process.Env to the current process); - should deduplication show warnings (maybe promoted to errors later); - whether a default for PATH (e.g "/bin:/usr/bin" should be added, when PATH is not set. [1]: opencontainers#1983 [2]: docker-archive/libcontainer#418 [3]: docker-archive/libcontainer#432 Signed-off-by: Kir Kolyshkin <[email protected]>
kolyshkin
added a commit
to kolyshkin/runc
that referenced
this pull request
Sep 10, 2024
The current implementation sets all the environment variables passed in Process.Env in the current process, one by one, then uses os.Environ to read those back. As pointed out in [1], this is slow, as runc calls os.Setenv for every variable, and there may be a few thousands of those. Looking into how os.Setenv is implemented, it is indeed slow, especially when cgo is enabled. Looking into why it was implemented, I found commit 9744d72 and traced it to [2], which discusses the actual reasons. At the time were: - HOME is not passed into container as it is set in setupUser by os.Setenv and has no effect on config.Env; - there is no deduplication of environment variables. Yet it was decided to not go ahead with this patch, but later [3] was merged with the carry of this patch. Now, from what I see: 1. Passing environment to exec is way faster than using os.Setenv and os.Environ (tests show ~20x faster in simple Go test, and 2x faster in real-world test, see below). 2. Setting environment variables in the runc context can result is ugly side effects (think GODEBUG, LD_PRELOAD, or _LIBCONTAINER_*). 3. Nothing in runtime spec says that the environment needs to be deduplicated, or the order of preference (whether the first or the last value of a variable with the same name is to be used). We should stick to what we have in order to maintain backward compatibility. This patch: - switches to passing env directly to exec; - adds deduplication mechanism to retain backward compatibility; - sets PATH from process.Env in the current process; - adds HOME to process.Env if not set; - removes os.Clearenv call as it's no longer needed. The benchmark added by the previous commit shows 2x improvement: > name old time/op new time/op delta > ExecInBigEnv-20 61.7ms ± 4% 24.9ms ±14% -59.73% (p=0.000 n=10+10) The remaining questions are: - are there any potential regressions (for example, from not setting values from process.Env to the current process); - should deduplication show warnings (maybe promoted to errors later); - whether a default for PATH (e.g "/bin:/usr/bin" should be added, when PATH is not set (most software does that). [1]: opencontainers#1983 [2]: docker-archive/libcontainer#418 [3]: docker-archive/libcontainer#432 Signed-off-by: Kir Kolyshkin <[email protected]>
kolyshkin
added a commit
to kolyshkin/runc
that referenced
this pull request
Oct 21, 2024
The current implementation sets all the environment variables passed in Process.Env in the current process, one by one, then uses os.Environ to read those back. As pointed out in [1], this is slow, as runc calls os.Setenv for every variable, and there may be a few thousands of those. Looking into how os.Setenv is implemented, it is indeed slow, especially when cgo is enabled. Looking into why it was implemented, I found commit 9744d72 and traced it to [2], which discusses the actual reasons. At the time were: - HOME is not passed into container as it is set in setupUser by os.Setenv and has no effect on config.Env; - there is no deduplication of environment variables. Yet it was decided to not go ahead with this patch, but later [3] was merged with the carry of this patch. Now, from what I see: 1. Passing environment to exec is way faster than using os.Setenv and os.Environ (tests show ~20x faster in simple Go test, and 2x faster in real-world test, see below). 2. Setting environment variables in the runc context can result is ugly side effects (think GODEBUG, LD_PRELOAD, or _LIBCONTAINER_*). 3. Nothing in runtime spec says that the environment needs to be deduplicated, or the order of preference (whether the first or the last value of a variable with the same name is to be used). We should stick to what we have in order to maintain backward compatibility. This patch: - switches to passing env directly to exec; - adds deduplication mechanism to retain backward compatibility; - sets PATH from process.Env in the current process; - adds HOME to process.Env if not set; The benchmark added by the previous commit shows 2x improvement: > name old time/op new time/op delta > ExecInBigEnv-20 61.7ms ± 4% 24.9ms ±14% -59.73% (p=0.000 n=10+10) The remaining questions are: - are there any potential regressions (for example, from not setting values from process.Env to the current process); - should deduplication show warnings (maybe promoted to errors later); - whether a default for PATH (e.g "/bin:/usr/bin" should be added, when PATH is not set (most software does that). [1]: opencontainers#1983 [2]: docker-archive/libcontainer#418 [3]: docker-archive/libcontainer#432 Signed-off-by: Kir Kolyshkin <[email protected]>
kolyshkin
added a commit
to kolyshkin/runc
that referenced
this pull request
Nov 1, 2024
The current implementation sets all the environment variables passed in Process.Env in the current process, one by one, then uses os.Environ to read those back. As pointed out in [1], this is slow, as runc calls os.Setenv for every variable, and there may be a few thousands of those. Looking into how os.Setenv is implemented, it is indeed slow, especially when cgo is enabled. Looking into why it was implemented, I found commit 9744d72 and traced it to [2], which discusses the actual reasons. At the time were: - HOME is not passed into container as it is set in setupUser by os.Setenv and has no effect on config.Env; - there is no deduplication of environment variables. Yet it was decided to not go ahead with this patch, but later [3] was merged with the carry of this patch. Now, from what I see: 1. Passing environment to exec is way faster than using os.Setenv and os.Environ (tests show ~20x faster in simple Go test, and 2x faster in real-world test, see below). 2. Setting environment variables in the runc context can result is ugly side effects (think GODEBUG, LD_PRELOAD, or _LIBCONTAINER_*). 3. Nothing in runtime spec says that the environment needs to be deduplicated, or the order of preference (whether the first or the last value of a variable with the same name is to be used). We should stick to what we have in order to maintain backward compatibility. This patch: - switches to passing env directly to exec; - adds deduplication mechanism to retain backward compatibility; - sets PATH from process.Env in the current process; - adds HOME to process.Env if not set; The benchmark added by the previous commit shows ~3x improvement: │ before │ after │ │ sec/op │ sec/op vs base │ ExecInBigEnv-20 61.53m ± 1% 21.87m ± 16% -64.46% (p=0.000 n=10) [1]: opencontainers#1983 [2]: docker-archive/libcontainer#418 [3]: docker-archive/libcontainer#432 Signed-off-by: Kir Kolyshkin <[email protected]>
kolyshkin
added a commit
to kolyshkin/runc
that referenced
this pull request
Dec 4, 2024
The current implementation sets all the environment variables passed in Process.Env in the current process, one by one, then uses os.Environ to read those back. As pointed out in [1], this is slow, as runc calls os.Setenv for every variable, and there may be a few thousands of those. Looking into how os.Setenv is implemented, it is indeed slow, especially when cgo is enabled. Looking into why it was implemented, I found commit 9744d72 and traced it to [2], which discusses the actual reasons. At the time were: - HOME is not passed into container as it is set in setupUser by os.Setenv and has no effect on config.Env; - there is no deduplication of environment variables. Yet it was decided to not go ahead with this patch, but later [3] was merged with the carry of this patch. Now, from what I see: 1. Passing environment to exec is way faster than using os.Setenv and os.Environ (tests show ~20x faster in simple Go test, and 2x faster in real-world test, see below). 2. Setting environment variables in the runc context can result is ugly side effects (think GODEBUG, LD_PRELOAD, or _LIBCONTAINER_*). 3. Nothing in runtime spec says that the environment needs to be deduplicated, or the order of preference (whether the first or the last value of a variable with the same name is to be used). We should stick to what we have in order to maintain backward compatibility. This patch: - switches to passing env directly to exec; - adds deduplication mechanism to retain backward compatibility; - sets PATH from process.Env in the current process; - adds HOME to process.Env if not set; The benchmark added by the previous commit shows ~3x improvement: │ before │ after │ │ sec/op │ sec/op vs base │ ExecInBigEnv-20 61.53m ± 1% 21.87m ± 16% -64.46% (p=0.000 n=10) [1]: opencontainers#1983 [2]: docker-archive/libcontainer#418 [3]: docker-archive/libcontainer#432 Signed-off-by: Kir Kolyshkin <[email protected]>
kolyshkin
added a commit
to kolyshkin/runc
that referenced
this pull request
Dec 4, 2024
The current implementation sets all the environment variables passed in Process.Env in the current process, one by one, then uses os.Environ to read those back. As pointed out in [1], this is slow, as runc calls os.Setenv for every variable, and there may be a few thousands of those. Looking into how os.Setenv is implemented, it is indeed slow, especially when cgo is enabled. Looking into why it was implemented the way it is, I found commit 9744d72 and traced it to [2], which discusses the actual reasons. It boils down to these two: - HOME is not passed into container as it is set in setupUser by os.Setenv and has no effect on config.Env; - there is a need to deduplication of environment variables. Yet it was decided in [2] to not go ahead with this patch, but later [3] was opened with the carry of this patch, and merged. Now, from what I see: 1. Passing environment to exec is way faster than using os.Setenv and os.Environ (tests show ~20x speed improvement in a simple Go test, and ~3x improvement in real-world test, see below). 2. Setting environment variables in the runc context may result is some ugly side effects (think GODEBUG, LD_PRELOAD, or _LIBCONTAINER_*). 3. Nothing in runtime spec says that the environment needs to be deduplicated, or the order of preference (whether the first or the last value of a variable with the same name is to be used). We should stick to what we have in order to maintain backward compatibility. So, this patch: - switches to passing env directly to exec; - adds deduplication mechanism to retain backward compatibility; - takes care to set PATH from process.Env in the current process (so that supplied PATH is used to find the binary to execute), also to retain backward compatibility; - adds HOME to process.Env if not set. The benchmark added by the previous commit shows ~3x improvement: │ before │ after │ │ sec/op │ sec/op vs base │ ExecInBigEnv-20 61.53m ± 1% 21.87m ± 16% -64.46% (p=0.000 n=10) [1]: opencontainers#1983 [2]: docker-archive/libcontainer#418 [3]: docker-archive/libcontainer#432 Signed-off-by: Kir Kolyshkin <[email protected]>
kolyshkin
added a commit
to kolyshkin/runc
that referenced
this pull request
Dec 23, 2024
The current implementation sets all the environment variables passed in Process.Env in the current process, one by one, then uses os.Environ to read those back. As pointed out in [1], this is slow, as runc calls os.Setenv for every variable, and there may be a few thousands of those. Looking into how os.Setenv is implemented, it is indeed slow, especially when cgo is enabled. Looking into why it was implemented the way it is, I found commit 9744d72 and traced it to [2], which discusses the actual reasons. It boils down to these two: - HOME is not passed into container as it is set in setupUser by os.Setenv and has no effect on config.Env; - there is a need to deduplication of environment variables. Yet it was decided in [2] to not go ahead with this patch, but later [3] was opened with the carry of this patch, and merged. Now, from what I see: 1. Passing environment to exec is way faster than using os.Setenv and os.Environ (tests show ~20x speed improvement in a simple Go test, and ~3x improvement in real-world test, see below). 2. Setting environment variables in the runc context may result is some ugly side effects (think GODEBUG, LD_PRELOAD, or _LIBCONTAINER_*). 3. Nothing in runtime spec says that the environment needs to be deduplicated, or the order of preference (whether the first or the last value of a variable with the same name is to be used). We should stick to what we have in order to maintain backward compatibility. So, this patch: - switches to passing env directly to exec; - adds deduplication mechanism to retain backward compatibility; - takes care to set PATH from process.Env in the current process (so that supplied PATH is used to find the binary to execute), also to retain backward compatibility; - adds HOME to process.Env if not set; - ensures any StartContainer CommandHook entries with no environment set explicitly are run with the same environment as before. Thanks to @lifubang who noticed that peculiarity. The benchmark added by the previous commit shows ~3x improvement: │ before │ after │ │ sec/op │ sec/op vs base │ ExecInBigEnv-20 61.53m ± 1% 21.87m ± 16% -64.46% (p=0.000 n=10) [1]: opencontainers#1983 [2]: docker-archive/libcontainer#418 [3]: docker-archive/libcontainer#432 Signed-off-by: Kir Kolyshkin <[email protected]>
kolyshkin
added a commit
to kolyshkin/runc
that referenced
this pull request
Dec 23, 2024
The current implementation sets all the environment variables passed in Process.Env in the current process, one by one, then uses os.Environ to read those back. As pointed out in [1], this is slow, as runc calls os.Setenv for every variable, and there may be a few thousands of those. Looking into how os.Setenv is implemented, it is indeed slow, especially when cgo is enabled. Looking into why it was implemented the way it is, I found commit 9744d72 and traced it to [2], which discusses the actual reasons. It boils down to these two: - HOME is not passed into container as it is set in setupUser by os.Setenv and has no effect on config.Env; - there is a need to deduplication of environment variables. Yet it was decided in [2] to not go ahead with this patch, but later [3] was opened with the carry of this patch, and merged. Now, from what I see: 1. Passing environment to exec is way faster than using os.Setenv and os.Environ (tests show ~20x speed improvement in a simple Go test, and ~3x improvement in real-world test, see below). 2. Setting environment variables in the runc context may result is some ugly side effects (think GODEBUG, LD_PRELOAD, or _LIBCONTAINER_*). 3. Nothing in runtime spec says that the environment needs to be deduplicated, or the order of preference (whether the first or the last value of a variable with the same name is to be used). We should stick to what we have in order to maintain backward compatibility. So, this patch: - switches to passing env directly to exec; - adds deduplication mechanism to retain backward compatibility; - takes care to set PATH from process.Env in the current process (so that supplied PATH is used to find the binary to execute), also to retain backward compatibility; - adds HOME to process.Env if not set; - ensures any StartContainer CommandHook entries with no environment set explicitly are run with the same environment as before. Thanks to @lifubang who noticed that peculiarity. The benchmark added by the previous commit shows ~3x improvement: │ before │ after │ │ sec/op │ sec/op vs base │ ExecInBigEnv-20 61.53m ± 1% 21.87m ± 16% -64.46% (p=0.000 n=10) [1]: opencontainers#1983 [2]: docker-archive/libcontainer#418 [3]: docker-archive/libcontainer#432 Signed-off-by: Kir Kolyshkin <[email protected]>
kolyshkin
added a commit
to kolyshkin/runc
that referenced
this pull request
Dec 23, 2024
The current implementation sets all the environment variables passed in Process.Env in the current process, one by one, then uses os.Environ to read those back. As pointed out in [1], this is slow, as runc calls os.Setenv for every variable, and there may be a few thousands of those. Looking into how os.Setenv is implemented, it is indeed slow, especially when cgo is enabled. Looking into why it was implemented the way it is, I found commit 9744d72 and traced it to [2], which discusses the actual reasons. It boils down to these two: - HOME is not passed into container as it is set in setupUser by os.Setenv and has no effect on config.Env; - there is a need to deduplication of environment variables. Yet it was decided in [2] to not go ahead with this patch, but later [3] was opened with the carry of this patch, and merged. Now, from what I see: 1. Passing environment to exec is way faster than using os.Setenv and os.Environ (tests show ~20x speed improvement in a simple Go test, and ~3x improvement in real-world test, see below). 2. Setting environment variables in the runc context may result is some ugly side effects (think GODEBUG, LD_PRELOAD, or _LIBCONTAINER_*). 3. Nothing in runtime spec says that the environment needs to be deduplicated, or the order of preference (whether the first or the last value of a variable with the same name is to be used). We should stick to what we have in order to maintain backward compatibility. So, this patch: - switches to passing env directly to exec; - adds deduplication mechanism to retain backward compatibility; - takes care to set PATH from process.Env in the current process (so that supplied PATH is used to find the binary to execute), also to retain backward compatibility; - adds HOME to process.Env if not set; - ensures any StartContainer CommandHook entries with no environment set explicitly are run with the same environment as before. Thanks to @lifubang who noticed that peculiarity. The benchmark added by the previous commit shows ~3x improvement: │ before │ after │ │ sec/op │ sec/op vs base │ ExecInBigEnv-20 61.53m ± 1% 21.87m ± 16% -64.46% (p=0.000 n=10) [1]: opencontainers#1983 [2]: docker-archive/libcontainer#418 [3]: docker-archive/libcontainer#432 Signed-off-by: Kir Kolyshkin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
In a Kubernetes cluster with a large number of services (>5000, causing a large amount of environment variables for the container) with guaranteed pods, the
runc initprocess can take a long time to run. This is caused by two issues:runc initcallsos.SetEnvfor every environment variable in the bundle, which can be expensive due to the underlying mutex locking and syscall logic.runc initprocess runs. This is outside the perview of runc I believe.This PR targets the former by removing the
os.SetEnvcalls, which causes therunc initprocess to run much faster in cases where there are a large number of configured environment variables in the bundle.