github API testing #2

nedbass · 2014-12-24T01:10:18Z

No description provided.

Leaks reported by using AddressSanitizer, GCC 6.1.0 Direct leak of 4097 byte(s) in 1 object(s) allocated from: #1 0x414f73 in process_options cmd/ztest/ztest.c:721 Direct leak of 5440 byte(s) in 17 object(s) allocated from: #1 0x41bfd5 in umem_alloc ../../lib/libspl/include/umem.h:88 #2 0x41bfd5 in ztest_zap_parallel cmd/ztest/ztest.c:4659 openzfs#3 0x4163a8 in ztest_execute cmd/ztest/ztest.c:5907 Signed-off-by: Gvozden Neskovic <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes openzfs#4896

- Fix autoreplace behaviour on statechange-led.sh script. ZED sends the following events on an auto-replace: 1. statechange: Disk goes UNAVAIL->ONLINE 2. statechange: Disk goes ONLINE->UNAVAIL 3. vdev_attach: Disk goes ONLINE Events 1-2 happen when ZED first attempts to do an auto-online. When that fails, ZED then tries an auto-replace, generating the vdev_attach event in openzfs#3. In the previous code, statechange-led was only looking at the UNAVAIL->ONLINE transition to turn off the LED. It ignored the #2 ONLINE->UNAVAIL transition, assuming it was just the "old" VDEV going offline. This is problematic, as a drive can go from ONLINE->UNAVAIL when it's malfunctioning, and we don't want to ignore that. This new patch correctly turns on the fault LED every time a drive becomes UNAVAIL. It also monitors vdev_attach events to trigger turning off the LED when an auto-replaced disk comes online. - Remove unnecessary libdevmapper warning with --with-config=kernel This fixes an unnecessary libdevmapper warning when building --with-config=kernel. Kernel code does not use libdevmapper, so the warning is not needed. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes openzfs#2375 Closes openzfs#5312 Closes openzfs#5331

The bug time sequence: 1. thread #1, `zfs_write` assign a txg "n". 2. In a same process, thread #2, mmap page fault (which means the `mm_sem` is hold) occurred, `zfs_dirty_inode` open a txg failed, and wait previous txg "n" completed. 3. thread #1 call `uiomove` to write, however page fault is occurred in `uiomove`, which means it need `mm_sem`, but `mm_sem` is hold by thread #2, so it stuck and can't complete, then txg "n" will not complete. So thread #1 and thread #2 are deadlocked. Reviewed-by: Chunwei Chen <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Matthew Ahrens <[email protected]> Signed-off-by: Grady Wong <[email protected]> Closes openzfs#7939

Booting debug kernel found an inconsistent lock dependency between dataset's ds_lock and its directory's dd_lock. [ 32.215336] ====================================================== [ 32.221859] WARNING: possible circular locking dependency detected [ 32.221861] 4.14.90+ openzfs#8 Tainted: G O [ 32.221862] ------------------------------------------------------ [ 32.221863] dynamic_kernel_/4667 is trying to acquire lock: [ 32.221864] (&ds->ds_lock){+.+.}, at: [<ffffffffc10a4bde>] dsl_dataset_check_quota+0x9e/0x8a0 [zfs] [ 32.221941] but task is already holding lock: [ 32.221941] (&dd->dd_lock){+.+.}, at: [<ffffffffc10cd8e9>] dsl_dir_tempreserve_space+0x3b9/0x1290 [zfs] [ 32.221983] which lock already depends on the new lock. [ 32.221983] the existing dependency chain (in reverse order) is: [ 32.221984] -> #1 (&dd->dd_lock){+.+.}: [ 32.221992] __mutex_lock+0xef/0x14c0 [ 32.222049] dsl_dir_namelen+0xd4/0x2d0 [zfs] [ 32.222093] dsl_dataset_namelen+0x2f1/0x430 [zfs] [ 32.222142] verify_dataset_name_len+0xd/0x40 [zfs] [ 32.222184] dmu_objset_find_dp_impl+0x5f5/0xef0 [zfs] [ 32.222226] dmu_objset_find_dp_cb+0x40/0x60 [zfs] [ 32.222235] taskq_thread+0x969/0x1460 [spl] [ 32.222238] kthread+0x2fb/0x400 [ 32.222241] ret_from_fork+0x3a/0x50 [ 32.222241] -> #0 (&ds->ds_lock){+.+.}: [ 32.222246] lock_acquire+0x14f/0x390 [ 32.222248] __mutex_lock+0xef/0x14c0 [ 32.222291] dsl_dataset_check_quota+0x9e/0x8a0 [zfs] [ 32.222355] dsl_dir_tempreserve_space+0x5d2/0x1290 [zfs] [ 32.222392] dmu_tx_assign+0xa61/0xdb0 [zfs] [ 32.222436] zfs_create+0x4e6/0x11d0 [zfs] [ 32.222481] zpl_create+0x194/0x340 [zfs] [ 32.222484] lookup_open+0xa86/0x16f0 [ 32.222486] path_openat+0xe56/0x2490 [ 32.222488] do_filp_open+0x17f/0x260 [ 32.222490] do_sys_open+0x195/0x310 [ 32.222491] SyS_open+0xbf/0xf0 [ 32.222494] do_syscall_64+0x191/0x4f0 [ 32.222496] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 32.222497] other info that might help us debug this: [ 32.222497] Possible unsafe locking scenario: [ 32.222498] CPU0 CPU1 [ 32.222498] ---- ---- [ 32.222499] lock(&dd->dd_lock); [ 32.222500] lock(&ds->ds_lock); [ 32.222502] lock(&dd->dd_lock); [ 32.222503] lock(&ds->ds_lock); [ 32.222504] *** DEADLOCK *** [ 32.222505] 3 locks held by dynamic_kernel_/4667: [ 32.222506] #0: (sb_writers#9){.+.+}, at: [<ffffffffaf68933c>] mnt_want_write+0x3c/0xa0 [ 32.222511] #1: (&type->i_mutex_dir_key#8){++++}, at: [<ffffffffaf652cde>] path_openat+0xe2e/0x2490 [ 32.222515] #2: (&dd->dd_lock){+.+.}, at: [<ffffffffc10cd8e9>] dsl_dir_tempreserve_space+0x3b9/0x1290 [zfs] The issue is caused by dsl_dataset_namelen() holding ds_lock, followed by acquiring dd_lock on ds->ds_dir in dsl_dir_namelen(). However, ds->ds_dir should not be protected by ds_lock, so releasing it before call to dsl_dir_namelen() prevents the lockdep issue Reviewed-by: Alek Pinchuk <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Chris Dunlop <[email protected]> Signed-off-by: Michael Zhivich <[email protected]> Closes openzfs#8413

The issue is caused by an incorrect usage of the sizeof() operator in vdev_obsolete_sm_object(): on 64-bit systems this is not an issue since both "uint64_t" and "uint64_t*" are 8 bytes in size. However on 32-bit systems pointers are 4 bytes long which is not supported by zap_lookup_impl(). Trying to remove a top-level vdev on a 32-bit system will cause the following failure: VERIFY3(0 == vdev_obsolete_sm_object(vd, &obsolete_sm_object)) failed (0 == 22) PANIC at vdev_indirect.c:833:vdev_indirect_sync_obsolete() Showing stack for process 1315 CPU: 6 PID: 1315 Comm: txg_sync Tainted: P OE 4.4.69+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 c1abc6e7 0ae10898 00000286 d4ac3bc0 c14397bc da4cd7d8 d4ac3bf0 d4ac3bd0 d790e7ce d7911cc1 00000523 d4ac3d00 d790e7d7 d7911ce4 da4cd7d8 00000341 da4ce664 da4cd8c0 da33fa6e 49524556 28335946 3d3d2030 65647620 626f5f76 Call Trace: [<>] dump_stack+0x58/0x7c [<>] spl_dumpstack+0x23/0x27 [spl] [<>] spl_panic.cold.0+0x5/0x41 [spl] [<>] ? dbuf_rele+0x3e/0x90 [zfs] [<>] ? zap_lookup_norm+0xbe/0xe0 [zfs] [<>] ? zap_lookup+0x57/0x70 [zfs] [<>] ? vdev_obsolete_sm_object+0x102/0x12b [zfs] [<>] vdev_indirect_sync_obsolete+0x3e1/0x64d [zfs] [<>] ? txg_verify+0x1d/0x160 [zfs] [<>] ? dmu_tx_create_dd+0x80/0xc0 [zfs] [<>] vdev_sync+0xbf/0x550 [zfs] [<>] ? mutex_lock+0x10/0x30 [<>] ? txg_list_remove+0x9f/0x1a0 [zfs] [<>] ? zap_contains+0x4d/0x70 [zfs] [<>] spa_sync+0x9f1/0x1b10 [zfs] ... [<>] ? kthread_stop+0x110/0x110 This commit simply corrects the "integer_size" parameter used to lookup the vdev's ZAP object. Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Igor Kozhukhov <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: loli10K <[email protected]> Closes openzfs#8790

After spa_vdev_remove_aux() is called, the config nvlist is no longer valid, as it's been replaced by the new one (with the specified device removed). Therefore any pointers into the nvlist are no longer valid. So we can't save the result of `fnvlist_lookup_string(nv, ZPOOL_CONFIG_PATH)` (in vd_path) across the call to spa_vdev_remove_aux(). Instead, use spa_strdup() to save a copy of the string before calling spa_vdev_remove_aux. Found by AddressSanitizer: ERROR: AddressSanitizer: heap-use-after-free on address ... READ of size 34 at 0x608000a1fcd0 thread T686 #0 0x7fe88b0c166d (/usr/lib/x86_64-linux-gnu/libasan.so.4+0x5166d) #1 0x7fe88a5acd6e in spa_strdup spa_misc.c:1447 #2 0x7fe88a688034 in spa_vdev_remove vdev_removal.c:2259 openzfs#3 0x55ffbc7748f8 in ztest_vdev_aux_add_remove ztest.c:3229 openzfs#4 0x55ffbc769fba in ztest_execute ztest.c:6714 openzfs#5 0x55ffbc779a90 in ztest_thread ztest.c:6761 openzfs#6 0x7fe889cbc6da in start_thread openzfs#7 0x7fe8899e588e in __clone 0x608000a1fcd0 is located 48 bytes inside of 88-byte region freed by thread T686 here: #0 0x7fe88b14e7b8 in __interceptor_free #1 0x7fe88ae541c5 in nvlist_free nvpair.c:874 #2 0x7fe88ae543ba in nvpair_free nvpair.c:844 openzfs#3 0x7fe88ae57400 in nvlist_remove_nvpair nvpair.c:978 openzfs#4 0x7fe88a683c81 in spa_vdev_remove_aux vdev_removal.c:185 openzfs#5 0x7fe88a68857c in spa_vdev_remove vdev_removal.c:2221 openzfs#6 0x55ffbc7748f8 in ztest_vdev_aux_add_remove ztest.c:3229 openzfs#7 0x55ffbc769fba in ztest_execute ztest.c:6714 openzfs#8 0x55ffbc779a90 in ztest_thread ztest.c:6761 openzfs#9 0x7fe889cbc6da in start_thread Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> Closes openzfs#9706

github API testing

f10bab6

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

github API testing #2

github API testing #2

nedbass commented Dec 24, 2014

github API testing #2

Are you sure you want to change the base?

github API testing #2

Conversation

nedbass commented Dec 24, 2014