This Repository contains an minimal AT86RF215 breakout board. The pin header is compatible to the openlabs.co Raspberry Pi 802.15.4 radio. However, this will not be a drop-in replacement as the software needs adjustment.
- The PCB contains no shielding for the RF filter, which will result in lower sensitivity and higher noise in the transmitted signal compared to e.g. the AT86RF215-XPRO reference design.
- It is highly recommended to not order PCBs based on this design as of now. While an earlier version seems to work flawlessly, this revision has not been tested yet.
- There is absolutely no warranty.