[WIP] Added option to define subtile in tile_annotation section

openfpga.sh

@@ -7,11 +7,12 @@
 
 if [ -z $OPENFPGA_PATH ]; then
     echo "OPENFPGA_PATH variable not found"
-    export OPENFPGA_PATH=$(pwd);
+    export OPENFPGA_PATH=$( dirname -- "$0"; );
     echo "Setting OPENFPGA_PATH=${OPENFPGA_PATH}"
 else
     echo "OPENFPGA_PATH=${OPENFPGA_PATH}"
 fi
+
 export OPENFPGA_SCRIPT_PATH="${OPENFPGA_PATH}/openfpga_flow/scripts"
 export OPENFPGA_TASK_PATH="${OPENFPGA_PATH}/openfpga_flow/tasks"
 if [ -z $PYTHON_EXEC ]; then export PYTHON_EXEC="python3"; fi

openfpga_flow/openfpga_arch/k4_N4_40nm_subtile_annotation_openfpga.xml

@@ -0,0 +1,206 @@
+<?xml version="1.0"?>
+<!-- Architecture annotation for OpenFPGA framework
+     This annotation supports the k6_N10_40nm.xml
+     - General purpose logic block
+       - K = 6, N = 10, I = 40
+       - Single mode
+     - Routing architecture
+       - L = 4, fc_in = 0.15, fc_out = 0.1
+  -->
+<openfpga_architecture>
+  <technology_library>
+    <device_library>
+      <device_model name="logic" type="transistor">
+        <lib type="industry" corner="TOP_TT" ref="M" path="${OPENFPGA_PATH}/openfpga_flow/tech/PTM_45nm/45nm.pm"/>
+        <design vdd="0.9" pn_ratio="2"/>
+        <pmos name="pch" chan_length="40e-9" min_width="140e-9" variation="logic_transistor_var"/>
+        <nmos name="nch" chan_length="40e-9" min_width="140e-9" variation="logic_transistor_var"/>
+      </device_model>
+      <device_model name="io" type="transistor">
+        <lib type="academia" ref="M" path="${OPENFPGA_PATH}/openfpga_flow/tech/PTM_45nm/45nm.pm"/>
+        <design vdd="2.5" pn_ratio="3"/>
+        <pmos name="pch_25" chan_length="270e-9" min_width="320e-9" variation="io_transistor_var"/>
+        <nmos name="nch_25" chan_length="270e-9" min_width="320e-9" variation="io_transistor_var"/>
+      </device_model>
+    </device_library>
+    <variation_library>
+      <variation name="logic_transistor_var" abs_deviation="0.1" num_sigma="3"/>
+      <variation name="io_transistor_var" abs_deviation="0.1" num_sigma="3"/>
+    </variation_library>
+  </technology_library>
+  <circuit_library>
+    <circuit_model type="inv_buf" name="INVTX1" prefix="INVTX1" is_default="true">
+      <design_technology type="cmos" topology="inverter" size="1"/>
+      <device_technology device_model_name="logic"/>
+      <port type="input" prefix="in" size="1"/>
+      <port type="output" prefix="out" size="1"/>
+      <delay_matrix type="rise" in_port="in" out_port="out">
+        10e-12
+      </delay_matrix>
+      <delay_matrix type="fall" in_port="in" out_port="out">
+        10e-12
+      </delay_matrix>
+    </circuit_model>
+    <circuit_model type="inv_buf" name="buf4" prefix="buf4" is_default="false">
+      <design_technology type="cmos" topology="buffer" size="1" num_level="2" f_per_stage="4"/>
+      <device_technology device_model_name="logic"/>
+      <port type="input" prefix="in" size="1"/>
+      <port type="output" prefix="out" size="1"/>
+      <delay_matrix type="rise" in_port="in" out_port="out">
+        10e-12
+      </delay_matrix>
+      <delay_matrix type="fall" in_port="in" out_port="out">
+        10e-12
+      </delay_matrix>
+    </circuit_model>
+    <circuit_model type="inv_buf" name="tap_buf4" prefix="tap_buf4" is_default="false">
+      <design_technology type="cmos" topology="buffer" size="1" num_level="3" f_per_stage="4"/>
+      <device_technology device_model_name="logic"/>
+      <port type="input" prefix="in" size="1"/>
+      <port type="output" prefix="out" size="1"/>
+      <delay_matrix type="rise" in_port="in" out_port="out">
+        10e-12
+      </delay_matrix>
+      <delay_matrix type="fall" in_port="in" out_port="out">
+        10e-12
+      </delay_matrix>
+    </circuit_model>
+    <circuit_model type="pass_gate" name="TGATE" prefix="TGATE" is_default="true">
+      <design_technology type="cmos" topology="transmission_gate" nmos_size="1" pmos_size="2"/>
+      <device_technology device_model_name="logic"/>
+      <input_buffer exist="false"/>
+      <output_buffer exist="false"/>
+      <port type="input" prefix="in" size="1"/>
+      <port type="input" prefix="sel" size="1"/>
+      <port type="input" prefix="selb" size="1"/>
+      <port type="output" prefix="out" size="1"/>
+      <delay_matrix type="rise" in_port="in sel selb" out_port="out">
+        10e-12 5e-12 5e-12
+      </delay_matrix>
+      <delay_matrix type="fall" in_port="in sel selb" out_port="out">
+        10e-12 5e-12 5e-12
+      </delay_matrix>
+    </circuit_model>
+    <circuit_model type="chan_wire" name="chan_segment" prefix="track_seg" is_default="true">
+      <design_technology type="cmos"/>
+      <input_buffer exist="false"/>
+      <output_buffer exist="false"/>
+      <port type="input" prefix="in" size="1"/>
+      <port type="output" prefix="out" size="1"/>
+      <wire_param model_type="pi" R="101" C="22.5e-15" num_level="1"/>
+      <!-- model_type could be T, res_val and cap_val DON'T CARE -->
+    </circuit_model>
+    <circuit_model type="wire" name="direct_interc" prefix="direct_interc" is_default="true">
+      <design_technology type="cmos"/>
+      <input_buffer exist="false"/>
+      <output_buffer exist="false"/>
+      <port type="input" prefix="in" size="1"/>
+      <port type="output" prefix="out" size="1"/>
+      <wire_param model_type="pi" R="0" C="0" num_level="1"/>
+      <!-- model_type could be T, res_val cap_val should be defined -->
+    </circuit_model>
+    <circuit_model type="mux" name="mux_tree" prefix="mux_tree" dump_structural_verilog="true">
+      <design_technology type="cmos" structure="tree" add_const_input="true" const_input_val="1"/>
+      <input_buffer exist="true" circuit_model_name="INVTX1"/>
+      <output_buffer exist="true" circuit_model_name="INVTX1"/>
+      <pass_gate_logic circuit_model_name="TGATE"/>
+      <port type="input" prefix="in" size="1"/>
+      <port type="output" prefix="out" size="1"/>
+      <port type="sram" prefix="sram" size="1"/>
+    </circuit_model>
+    <circuit_model type="mux" name="mux_tree_tapbuf" prefix="mux_tree_tapbuf" is_default="true" dump_structural_verilog="true">
+      <design_technology type="cmos" structure="tree" add_const_input="true" const_input_val="1"/>
+      <input_buffer exist="true" circuit_model_name="INVTX1"/>
+      <output_buffer exist="true" circuit_model_name="tap_buf4"/>
+      <pass_gate_logic circuit_model_name="TGATE"/>
+      <port type="input" prefix="in" size="1"/>
+      <port type="output" prefix="out" size="1"/>
+      <port type="sram" prefix="sram" size="1"/>
+    </circuit_model>
+    <!--DFF subckt ports should be defined as <D> <Q> <CLK> <RESET> <SET>  -->
+    <circuit_model type="ff" name="DFFSRQ" prefix="DFFSRQ" spice_netlist="${OPENFPGA_PATH}/openfpga_flow/openfpga_cell_library/spice/dff.sp" verilog_netlist="${OPENFPGA_PATH}/openfpga_flow/openfpga_cell_library/verilog/dff.v">
+      <design_technology type="cmos"/>
+      <input_buffer exist="true" circuit_model_name="INVTX1"/>
+      <output_buffer exist="true" circuit_model_name="INVTX1"/>
+      <port type="input" prefix="D" size="1"/>
+      <port type="input" prefix="set" lib_name="SET" size="1" is_global="true" default_val="0" is_set="true"/>
+      <port type="input" prefix="reset" lib_name="RST" size="1" is_global="true" default_val="0" is_reset="true"/>
+      <port type="output" prefix="Q" size="1"/>
+      <port type="clock" prefix="clk" lib_name="CK" size="1" is_global="false" default_val="0"/>
+    </circuit_model>
+    <circuit_model type="lut" name="lut4" prefix="lut4" dump_structural_verilog="true">
+      <design_technology type="cmos"/>
+      <input_buffer exist="true" circuit_model_name="INVTX1"/>
+      <output_buffer exist="true" circuit_model_name="INVTX1"/>
+      <lut_input_inverter exist="true" circuit_model_name="INVTX1"/>
+      <lut_input_buffer exist="true" circuit_model_name="buf4"/>
+      <pass_gate_logic circuit_model_name="TGATE"/>
+      <port type="input" prefix="in" size="4"/>
+      <port type="output" prefix="out" size="1"/>
+      <port type="sram" prefix="sram" size="16"/>
+    </circuit_model>
+    <!--Scan-chain DFF subckt ports should be defined as <D> <Q> <Qb> <CLK> <RESET> <SET>  -->
+    <circuit_model type="ccff" name="DFF" prefix="DFF" spice_netlist="${OPENFPGA_PATH}/openfpga_flow/openfpga_cell_library/spice/dff.sp" verilog_netlist="${OPENFPGA_PATH}/openfpga_flow/openfpga_cell_library/verilog/dff.v">
+      <design_technology type="cmos"/>
+      <input_buffer exist="true" circuit_model_name="INVTX1"/>
+      <output_buffer exist="true" circuit_model_name="INVTX1"/>
+      <port type="input" prefix="D" size="1"/>
+      <port type="output" prefix="Q" size="1"/>
+      <port type="output" prefix="QN" size="1"/>
+      <port type="clock" prefix="prog_clk" lib_name="CK" size="1" is_global="true" default_val="0" is_prog="true"/>
+    </circuit_model>
+    <circuit_model type="iopad" name="GPIN" prefix="GPIN" is_default="true" verilog_netlist="${OPENFPGA_PATH}/openfpga_flow/openfpga_cell_library/verilog/gpio.v">
+      <design_technology type="cmos"/>
+      <input_buffer exist="true" circuit_model_name="sky130_fd_sc_hd__inv_1"/>
+      <output_buffer exist="true" circuit_model_name="sky130_fd_sc_hd__inv_1"/>
+      <port type="inout" prefix="PAD" lib_name="A" size="1" is_global="true" is_io="true" is_data_io="true"/>
+      <port type="output" prefix="inpad" lib_name="Y" size="1"/>
+    </circuit_model>
+    <circuit_model type="iopad" name="GPOUT" prefix="GPOUT" is_default="false" verilog_netlist="${OPENFPGA_PATH}/openfpga_flow/openfpga_cell_library/verilog/gpio.v">
+      <design_technology type="cmos"/>
+      <input_buffer exist="true" circuit_model_name="sky130_fd_sc_hd__inv_1"/>
+      <output_buffer exist="true" circuit_model_name="sky130_fd_sc_hd__inv_1"/>
+      <port type="inout" prefix="PAD" lib_name="Y" size="1" is_global="true" is_io="true" is_data_io="true"/>
+      <port type="input" prefix="outpad" lib_name="A" size="1"/>
+    </circuit_model>
+  </circuit_library>
+  <configuration_protocol>
+    <organization type="scan_chain" circuit_model_name="DFF"/>
+  </configuration_protocol>
+  <connection_block>
+    <switch name="ipin_cblock" circuit_model_name="mux_tree_tapbuf"/>
+  </connection_block>
+  <switch_block>
+    <switch name="0" circuit_model_name="mux_tree_tapbuf"/>
+  </switch_block>
+  <routing_segment>
+    <segment name="L4" circuit_model_name="chan_segment"/>
+  </routing_segment>
+  <tile_annotations>
+    <global_port name="clk" is_clock="true" default_val="0">
+      <tile name="clb" port="clk" x="-1" y="-1"/>
+    </global_port>
+  </tile_annotations>
+  <pb_type_annotations>
+    <!-- fpga_input pb_type annoptation  -->
+    <pb_type name="fpga_input" physical_mode_name="physical"/>
+    <pb_type name="fpga_output" physical_mode_name="physical"/>
+
+    <pb_type name="fpga_input[physical].iopad" circuit_model_name="GPIN"/>
+    <pb_type name="fpga_output[physical].iopad" circuit_model_name="GPOUT"/>
+
+    <pb_type name="fpga_input[inpad].inpad" physical_pb_type_name="fpga_input[physical].iopad"/>
+    <pb_type name="fpga_output[outpad].outpad" physical_pb_type_name="fpga_output[physical].iopad"/>
+
+    <!-- End physical pb_type binding in complex block IO -->
+    <!-- physical pb_type binding in complex block CLB -->
+    <!-- physical mode will be the default mode if not specified -->
+    <pb_type name="clb">
+      <!-- Binding interconnect to circuit models as their physical implementation, if not defined, we use the default model -->
+      <interconnect name="crossbar" circuit_model_name="mux_tree"/>
+    </pb_type>
+    <pb_type name="clb.fle[n1_lut4].ble4.lut4" circuit_model_name="lut4"/>
+    <pb_type name="clb.fle[n1_lut4].ble4.ff" circuit_model_name="DFFSRQ"/>
+    <!-- End physical pb_type binding in complex block IO -->
+  </pb_type_annotations>
+</openfpga_architecture>

openfpga_flow/scripts/run_fpga_flow.py

@@ -867,8 +867,8 @@ def collect_files_for_vpr():
 
     # Sanitize provided Benchmark option
     if not os.path.isfile(args.base_verilog or ""):
-        logger.error("Base Verilog File - %s" % args.base_verilog)
-        clean_up_and_exit("Provided base_verilog file not found")
+        logger.warning("Base Verilog File - %s", args.base_verilog)
+        return
     shutil.copy(args.base_verilog, args.top_module + "_output_verilog.v")
 
 

openfpga_flow/scripts/run_fpga_task.py

@@ -353,13 +353,6 @@ def generate_each_task_actions(taskname):
                 else:
                     CurrBenchPara["activity_file"] = SynthSection.get(bech_name + "_act")
 
-            # Check if base verilog file exists
-            if not SynthSection.get(bech_name + "_verilog"):
-                clean_up_and_exit(
-                    "Missing argument %s for vpr_blif flow" % (bech_name + "_verilog")
-                )
-            CurrBenchPara["verilog_file"] = SynthSection.get(bech_name + "_verilog")
-
         # Add script parameter list in current benchmark
         ScriptSections = [x for x in TaskFileSections if "SCRIPT_PARAM" in x]
         script_para_list = {}
@@ -368,10 +361,21 @@ def generate_each_task_actions(taskname):
             for key, values in task_conf[eachset].items():
                 command += ["--" + key, values] if values else ["--" + key]
 
+            if "end_flow_with_test" in command:
+                # Verilog script is only required when end_flow_with_test defined
+                # Check if base verilog file exists
+                if not SynthSection.get(bech_name + "_verilog"):
+                    clean_up_and_exit(
+                        "Missing argument %s for vpr_blif flow" % (bech_name + "_verilog")
+                    )
+
             # Set label for Sript Parameters
             set_lbl = eachset.replace("SCRIPT_PARAM", "")
             set_lbl = set_lbl[1:] if set_lbl else "Common"
             script_para_list[set_lbl] = command
+
+            CurrBenchPara["verilog_file"] = SynthSection.get(bech_name + "_verilog")
+
         CurrBenchPara["script_params"] = script_para_list
 
         benchmark_list.append(CurrBenchPara)

openfpga_flow/tasks/basic_tests/global_tile_ports/global_tile_subtile/config/task.conf

@@ -0,0 +1,37 @@
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+# Configuration file for running experiments
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+# timeout_each_job : FPGA Task script splits fpga flow into multiple jobs
+# Each job execute fpga_flow script on combination of architecture & benchmark
+# timeout_each_job is timeout for each job
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+
+[GENERAL]
+run_engine=openfpga_shell
+power_tech_file = ${PATH:OPENFPGA_PATH}/openfpga_flow/tech/PTM_45nm/45nm.xml
+power_analysis = true
+spice_output=false
+verilog_output=true
+timeout_each_job = 20*60
+fpga_flow=yosys_vpr
+
+[OpenFPGA_SHELL]
+openfpga_shell_template=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_shell_scripts/global_tile_clock_full_testbench_example_script.openfpga
+openfpga_arch_file=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_arch/k4_N4_40nm_subtile_annotation_openfpga.xml
+openfpga_sim_setting_file=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_simulation_settings/auto_sim_openfpga.xml
+openfpga_vpr_device_layout=2x2
+
+[ARCHITECTURES]
+arch0=${PATH:OPENFPGA_PATH}/openfpga_flow/vpr_arch/k4_N4_io_subtiles_40nm.xml
+
+[BENCHMARKS]
+bench0=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/micro_benchmark/and2/and2.v
+
+
+[SYNTHESIS_PARAM]
+bench_read_verilog_options_common = -nolatches
+bench0_top = and2
+bench0_chan_width = 300
+
+[SCRIPT_PARAM_MIN_ROUTE_CHAN_WIDTH]
+end_flow_with_test=