Process completed with exit code 1.

Returning Any from function declared to return "bytes" To disable, use ` # type: ignore[no-any-return]`

Name "PASS" is not defined To disable, use ` # type: ignore[name-defined]`

Undefined variable 'PASS' (undefined-variable) See [undefined-variable](https://pylint.pycqa.org/en/latest/user_guide/messages/error/undefined-variable.html). To disable, use ` # pylint: disable=undefined-variable`

Undefined name `PASS`. See https://beta.ruff.rs/docs/rules/. To disable, use ` # noqa: F821`

undefined name 'PASS' See https://www.flake8rules.com/rules/F821.html. To disable, use ` # noqa: F821`

Process completed with exit code 1.

Returning Any from function declared to return "bytes" To disable, use ` # type: ignore[no-any-return]`

Name "PASS" is not defined To disable, use ` # type: ignore[name-defined]`

Undefined variable 'PASS' (undefined-variable) See [undefined-variable](https://pylint.pycqa.org/en/latest/user_guide/messages/error/undefined-variable.html). To disable, use ` # pylint: disable=undefined-variable`

Undefined name `PASS`. See https://beta.ruff.rs/docs/rules/. To disable, use ` # noqa: F821`

undefined name 'PASS' See https://www.flake8rules.com/rules/F821.html. To disable, use ` # noqa: F821`

Process completed with exit code 1.

Undefined name `PASS`. See https://beta.ruff.rs/docs/rules/. To disable, use ` # noqa: F821`

undefined name 'PASS' See https://www.flake8rules.com/rules/F821.html. To disable, use ` # noqa: F821`

Returning Any from function declared to return "bytes" To disable, use ` # type: ignore[no-any-return]`

Name "PASS" is not defined To disable, use ` # type: ignore[name-defined]`

Undefined variable 'PASS' (undefined-variable) See [undefined-variable](https://pylint.pycqa.org/en/latest/user_guide/messages/error/undefined-variable.html). To disable, use ` # pylint: disable=undefined-variable`

Process completed with exit code 1.

Undefined name `PASS`. See https://beta.ruff.rs/docs/rules/. To disable, use ` # noqa: F821`

undefined name 'PASS' See https://www.flake8rules.com/rules/F821.html. To disable, use ` # noqa: F821`

Returning Any from function declared to return "bytes" To disable, use ` # type: ignore[no-any-return]`

Name "PASS" is not defined To disable, use ` # type: ignore[name-defined]`

Undefined variable 'PASS' (undefined-variable) See [undefined-variable](https://pylint.pycqa.org/en/latest/user_guide/messages/error/undefined-variable.html). To disable, use ` # pylint: disable=undefined-variable`

Undefined name `PASS`. See https://beta.ruff.rs/docs/rules/. To disable, use ` # noqa: F821`

undefined name 'PASS' See https://www.flake8rules.com/rules/F821.html. To disable, use ` # noqa: F821`

Returning Any from function declared to return "bytes" To disable, use ` # type: ignore[no-any-return]`

Name "PASS" is not defined To disable, use ` # type: ignore[name-defined]`

Undefined variable 'PASS' (undefined-variable) See [undefined-variable](https://pylint.pycqa.org/en/latest/user_guide/messages/error/undefined-variable.html). To disable, use ` # pylint: disable=undefined-variable`

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Undefined name `PASS`. See https://beta.ruff.rs/docs/rules/. To disable, use ` # noqa: F821`

undefined name 'PASS' See https://www.flake8rules.com/rules/F821.html. To disable, use ` # noqa: F821`

Returning Any from function declared to return "bytes" To disable, use ` # type: ignore[no-any-return]`

Name "PASS" is not defined To disable, use ` # type: ignore[name-defined]`

Undefined variable 'PASS' (undefined-variable) See [undefined-variable](https://pylint.pycqa.org/en/latest/user_guide/messages/error/undefined-variable.html). To disable, use ` # pylint: disable=undefined-variable`

Canceling since a higher priority waiting request for 'CI-refs/pull/80/merge-false' exists

Process completed with exit code 1.

Canceling since a higher priority waiting request for 'CI-refs/pull/80/merge-false' exists

The operation was canceled.

Run `lintrunner -a` to apply this patch.

Unnecessary "elif" after "return", remove the leading "el" from "elif" (no-else-return) See [no-else-return](https://pylint.pycqa.org/en/latest/user_guide/messages/refactor/no-else-return.html). To disable, use ` # pylint: disable=no-else-return`

Do not use `len(SEQUENCE)` without comparison to determine if a sequence is empty (use-implicit-booleaness-not-len) See [use-implicit-booleaness-not-len](https://pylint.pycqa.org/en/latest/user_guide/messages/convention/use-implicit-booleaness-not-len.html). To disable, use ` # pylint: disable=use-implicit-booleaness-not-len`

Use ternary operator `rest = requirements.pop().comments if requirements[-1].value is None else []` instead of `if`-`else`-block. See https://beta.ruff.rs/docs/rules/. To disable, use ` # noqa: SIM108`

Run `lintrunner -a` to apply this patch.

expected 2 blank lines, found 1 See https://www.flake8rules.com/rules/E302.html. To disable, use ` # noqa: E302`

Replace `else: return x` with `return x`

Replace `len(x)` with `x`

Run `lintrunner -a` to apply this patch.

Run `lintrunner -a` to apply this patch.

Run `lintrunner -a` to apply this patch.

Run `lintrunner -a` to apply this patch.

Unnecessary "elif" after "return", remove the leading "el" from "elif" (no-else-return) See [no-else-return](https://pylint.pycqa.org/en/latest/user_guide/messages/refactor/no-else-return.html). To disable, use ` # pylint: disable=no-else-return`

Do not use `len(SEQUENCE)` without comparison to determine if a sequence is empty (use-implicit-booleaness-not-len) See [use-implicit-booleaness-not-len](https://pylint.pycqa.org/en/latest/user_guide/messages/convention/use-implicit-booleaness-not-len.html). To disable, use ` # pylint: disable=use-implicit-booleaness-not-len`

Use ternary operator `rest = requirements.pop().comments if requirements[-1].value is None else []` instead of `if`-`else`-block. See https://beta.ruff.rs/docs/rules/. To disable, use ` # noqa: SIM108`

Run `lintrunner -a` to apply this patch.

expected 2 blank lines, found 1 See https://www.flake8rules.com/rules/E302.html. To disable, use ` # noqa: E302`

Replace `else: return x` with `return x`

Replace `len(x)` with `x`

Run `lintrunner -a` to apply this patch.

Use ternary operator `rest = requirements.pop().comments if requirements[-1].value is None else []` instead of `if`-`else`-block. See https://beta.ruff.rs/docs/rules/. To disable, use ` # noqa: SIM108`

Run `lintrunner -a` to apply this patch.

expected 2 blank lines, found 1 See https://www.flake8rules.com/rules/E302.html. To disable, use ` # noqa: E302`

Run `lintrunner -a` to apply this patch.

Unnecessary "elif" after "return", remove the leading "el" from "elif" (no-else-return) See [no-else-return](https://pylint.pycqa.org/en/latest/user_guide/messages/refactor/no-else-return.html). To disable, use ` # pylint: disable=no-else-return`

Do not use `len(SEQUENCE)` without comparison to determine if a sequence is empty (use-implicit-booleaness-not-len) See [use-implicit-booleaness-not-len](https://pylint.pycqa.org/en/latest/user_guide/messages/convention/use-implicit-booleaness-not-len.html). To disable, use ` # pylint: disable=use-implicit-booleaness-not-len`

Run `lintrunner -a` to apply this patch.

Run `lintrunner -a` to apply this patch.

Run `lintrunner -a` to apply this patch.

Run `lintrunner -a` to apply this patch.

Use ternary operator `rest = requirements.pop().comments if requirements[-1].value is None else []` instead of `if`-`else`-block. See https://beta.ruff.rs/docs/rules/. To disable, use ` # noqa: SIM108`

Run `lintrunner -a` to apply this patch.

Run `lintrunner -a` to apply this patch.

expected 2 blank lines, found 1 See https://www.flake8rules.com/rules/E302.html. To disable, use ` # noqa: E302`

Unnecessary "elif" after "return", remove the leading "el" from "elif" (no-else-return) See [no-else-return](https://pylint.pycqa.org/en/latest/user_guide/messages/refactor/no-else-return.html). To disable, use ` # pylint: disable=no-else-return`

Do not use `len(SEQUENCE)` without comparison to determine if a sequence is empty (use-implicit-booleaness-not-len) See [use-implicit-booleaness-not-len](https://pylint.pycqa.org/en/latest/user_guide/messages/convention/use-implicit-booleaness-not-len.html). To disable, use ` # pylint: disable=use-implicit-booleaness-not-len`

Use ternary operator `rest = requirements.pop().comments if requirements[-1].value is None else []` instead of `if`-`else`-block. See https://beta.ruff.rs/docs/rules/. To disable, use ` # noqa: SIM108`

Run `lintrunner -a` to apply this patch.

Run `lintrunner -a` to apply this patch.

expected 2 blank lines, found 1 See https://www.flake8rules.com/rules/E302.html. To disable, use ` # noqa: E302`

Replace `else: return x` with `return x`

Replace `len(x)` with `x`

Unnecessary "elif" after "return", remove the leading "el" from "elif" (no-else-return) See [no-else-return](https://pylint.pycqa.org/en/latest/user_guide/messages/refactor/no-else-return.html). To disable, use ` # pylint: disable=no-else-return`

Do not use `len(SEQUENCE)` without comparison to determine if a sequence is empty (use-implicit-booleaness-not-len) See [use-implicit-booleaness-not-len](https://pylint.pycqa.org/en/latest/user_guide/messages/convention/use-implicit-booleaness-not-len.html). To disable, use ` # pylint: disable=use-implicit-booleaness-not-len`

Run `lintrunner -a` to apply this patch.

Run `lintrunner -a` to apply this patch.

Run `lintrunner -a` to apply this patch.

Use ternary operator `rest = requirements.pop().comments if requirements[-1].value is None else []` instead of `if`-`else`-block. See https://beta.ruff.rs/docs/rules/. To disable, use ` # noqa: SIM108`

Run `lintrunner -a` to apply this patch.

Run `lintrunner -a` to apply this patch.

Replace `else: return x` with `return x`

Replace `len(x)` with `x`

expected 2 blank lines, found 1 See https://www.flake8rules.com/rules/E302.html. To disable, use ` # noqa: E302`

Unnecessary "elif" after "return", remove the leading "el" from "elif" (no-else-return) See [no-else-return](https://pylint.pycqa.org/en/latest/user_guide/messages/refactor/no-else-return.html). To disable, use ` # pylint: disable=no-else-return`

Do not use `len(SEQUENCE)` without comparison to determine if a sequence is empty (use-implicit-booleaness-not-len) See [use-implicit-booleaness-not-len](https://pylint.pycqa.org/en/latest/user_guide/messages/convention/use-implicit-booleaness-not-len.html). To disable, use ` # pylint: disable=use-implicit-booleaness-not-len`