This module contains a few functions for displaying a calendar in the PowerShell console. The primary function is based on code originally published by Lee Holmes at http://www.leeholmes.com/blog/2008/12/03/showing-calendars-in-your-oof-messages/. However, v2.0.0 of this module contains a complete rewrite of the core functions.
After installing the module, you can view a local PDF version of this file by running Show-PSCalendarHelp.
You can install this module from the PowerShell Gallery.
Install-Module PSCalendar [-scope currentuser]Installing this module will also install the
ThreadJobmodule from the PowerShell Gallery, as that is module dependency if you want to useShow-GuiCalendar.
The commands in this module have been tested on PowerShell 7 both under Windows and Linux and there is no reason these commands should not work. Commands and aliases that are incompatible with non-Windows platforms are not exported.
Note: If you are upgrading to v2.0.0 or later of this module, and have older versions installed, it is recommended that you uninstall the older versions.
The commands in this module have been updated to take advantage ANSI escape sequences. The main function, Get-Calendar, will display the current month in the console, highlighting the current date with an ANSI escape sequence.
But you can also specify a calendar by month and year.
In this example you can see that I specified dates to highlight. Or you can specify a range of months.
The function should be culturally aware. The commands in this module that have a -Month parameter should autocomplete to culture-specific month names.
There is a similar autocompletion for -Year that begins with the current year and then the next 5 years. Although nothing prevents you from entering any year you want.
In previous versions of this module, there was a command called Show-Calendar which wrote a colorized version of the calendar to the host using Write-Host. This command has been rewritten and now is essentially a wrapper for Get-Calendar. The primary difference is that you can position the calendar.
One way you might want to use this is in your PowerShell console. You can use the prompt function like this:
#requires -modules @{ModuleName="PSCalendar";ModuleVersion="2.5.0"}
Function prompt {
#define a buffercell fill
$fill = [system.management.automation.host.buffercell]::new(" ",$host.ui.RawUI.BackgroundColor,$host.ui.RawUI.BackgroundColor,"complete")
#define a rectangle with an upper left corner X distance from the edge
$left =$host.ui.RawUI.WindowSize.width - 42
#need to adjust positioning based on buffer size of the console
#is the cursor beyond the window size, ie have we scrolled down?
if ($host.UI.RawUI.CursorPosition.Y -gt $host.UI.RawUI.WindowSize.Height) {
$top = $host.ui.RawUI.CursorPosition.Y - $host.UI.RawUI.WindowSize.Height
}
else {
$top = 0
}
# System.Management.Automation.Host.Rectangle new(int left, int top, int right, int bottom)
$r = [System.Management.Automation.Host.Rectangle]::new($left, 0, $host.ui.rawui.windowsize.width,$top+10)
#clear the area for the calendar display
$host.ui.rawui.SetBufferContents($r,$fill)
#show the calendar in the upper right corner of the console
$pos = [system.management.automation.host.coordinates]::new($left,0)
Show-Calendar -Position $pos
"PS $($executionContext.SessionState.Path.CurrentLocation)$('>' * ($nestedPromptLevel + 1)) ";
# .Link
# https://go.microsoft.com/fwlink/?LinkID=225750
# .ExternalHelp System.Management.Automation.dll-help.xml
}Assuming the width of your console is at least 120, this code should work. Otherwise, you might need to tweak the positioning. This should also work in Windows Terminal. If you add some highlighted dates using $PSDefaultParameterValues, then you'll have a calendar right in front of you.
Note that any command output may be truncated because of the calendar display. This prompt function works as expected when using the Windows Terminal. Function needs work to behave as expected in a traditional PowerShell console where you might have a large buffer for scrolling.
Finally, you can display a graphical calendar using a Windows Presentation Foundation (WPF) based script.
⚠️ This command is not supported in PowerShell 7 nor is it exported in the module.
The function runs the calendar-related code in a runspace so it does not block your prompt. You can display up to 3 months and specify dates to highlight.
PS C:\> Show-GuiCalendar 12/2018 2/2019 -highlight 12/24/18,12/25/18,12/31/18,1/1/19,1/18/19,2/14/19,2/22/19
The calendar form is transparent. But you should be able to click on it to drag it around your screen. You can also use the + and - keys to increase or decrease the calendar's opacity. Be aware that if you close the PowerShell session that launched the calendar, the calendar too will close.
Beginning with module version 2.2.0 you can also customize the calendar background with an image:
Show-GuiCalendar -BackgroundImage D:\images\blue-robot-ps-thumb.jpg -Stretch UniformToFill -FontWeight Bold
Or you can specify a color. You can specify a WPF brush color like Cornsilk or Wheat, or use a color code like #FFF000:
Show-GuiCalendar -BackgroundColor "#FFF000"
On Windows platforms, the -BackgroundColor parameter will autocomplete the available brush colors.
The Linux world has an ncal command which displays the month in a vertical fashion. Get-NCalendar and its alias ncal work in a similar manner. The default is for the current month and year.
The current date will be highlighted unless you use -HideHighlight. You must use the full month name, although there is tab completion.
PS C:\> ncal January 2022
January 2022
Sun 2 9 16 23 30
Mon 3 10 17 24 31
Tue 4 11 18 25
Wed 5 12 19 26
Thu 6 13 20 27
Fri 7 14 21 28
Sat 1 8 15 22 29
This command does not support date highlighting. See below.
This simple command will list the full month names for the current culture.
PS C:\> Get-MonthName
January
February
March
April
May
June
July
August
September
October
November
December
You might use this to build a larger ncal listing.
PS C:\> Get-MonthName | Select-Object -first 3 | Get-NCalendar -Year 2022
January 2022
Sun 2 9 16 23 30
Mon 3 10 17 24 31
Tue 4 11 18 25
Wed 5 12 19 26
Thu 6 13 20 27
Fri 7 14 21 28
Sat 1 8 15 22 29
February 2022
Sun 6 13 20 27
Mon 7 14 21 28
Tue 1 8 15 22
Wed 2 9 16 23
Thu 3 10 17 24
Fri 4 11 18 25
Sat 5 12 19 26
March 2022
Sun 6 13 20 27
Mon 7 14 21 28
Tue 1 8 15 22 29
Wed 2 9 16 23 30
Thu 3 10 17 24 31
Fri 4 11 18 25
Sat 5 12 19 26
Beginning with v2.2.0, in addition to specifying an array of dates to highlight, you can also use a hashtable. The key should be the highlight date, and the value a brief description.
$h = @{"7/4/2021"="4th of July Holiday";"7/14/2021"="Bastille Day";"7/22/2021"="Ballet recitial"}
Show-GuiCalendar -Start 7/1/2021 -HighlightDate $h -BackgroundColor wheat -FontWeight Bold -Font TahomaWhen you pass a hashtable, you will get a tooltip popup when you hover the mouse over the month.
g
This function requires the WPF-related assemblies. It should work in Windows PowerShell and PowerShell 7. You will receive a warning if any incompatibility is detected.
Beginning with v2.0.0 of this module, ANSI escape sequences used to format the calendar are stored in module-scoped hashtable. You can use Get-PSCalendarConfiguration to view the current settings.
The output will show you the escape sequence appropriate for your PowerShell version. If you want to change a setting, you can use:
You need to include the escape character but you do not need to include the closing escape sequence.
This change lasts for the duration of your PowerShell session. If you want to make it more permanent, you will need to add the commands to your PowerShell profile script.
As you've seen, there are several commands in this module that rely on ANSI for formatting. The hosting application needs to be able to recognize and use ANSI escape sequences. These commands should work in both Windows PowerShell and PowerShell 7 in the traditional PowerShell consoles or in Windows Terminal. They will not work in the PowerShell ISE. ANSI-related output will be automatically disabled if the PowerShell ISE is detected.
If you aren't sure if your host supports ANSI, run Get-PSReadlineOption. You should see something like this:
If you don't see color formatting, the hosting application doesn't support ANSI.
I've tried very hard to make the commands respect culture. Most commands now that string values to represent dates which are then treated as dates internally. For this reason, it is important that you follow the culture-specific short date format that you get from running this command:
(Get-Culture).datetimeformat.ShortDatePatternIn Windows PowerShell, all of the commands appear to respect culture settings. However, when running in PowerShell 7 there appears to be a bug in .NET Core and how it returns culture information for some cultures, specifically the first day of the week. If you run Get-Calendar or Show-Calendar and the week begins on the wrong day, use the FirstDay parameter to override the detected .NET values with the correct one.
PS C:\> Get-Calendar august -firstday Monday -highlight 1/8/2021,15,8,2021
August 2021
Mon Tue Wed Thu Fri Sat Sun
26 27 28 29 30 31 1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31 1 2 3 4
For example, if you are running under the en-AU culture, you would need to use this syntax.
I have tried to make this module culture-aware. Testing across cultures is not an easy process. If you encounter a problem and are not running PowerShell under the EN-US culture, run the calendar command you are trying to use with -Verbose and post the results in a new issue. Or if you have both Windows PowerShell and PowerShell 7 installed, try the same command in both versions.