rclip

rclip is a tool copy text from remote host to local system cliboard;

it is specifically designed for copy seletected text in tmux copy-mode on a remote host to local system cliboard over network; which is a big pain point of using tmux;

Note: You don't need rclip if your terminal supports OSC 52

how does it work?

first run rclip as reflector role on remote host, which is processing listening on two ports over TLS:

• rcv_port: default 8891
• send_port: default 8890

the ports could be changed by commandline parameters

any text received on rcv_port will be forwarded to send_port

run rclip as sender role on local system, it connects to the send_port of reflector, and copy the received text to local system clipboard

configure tmux so that the tmux copy-pipe command invoke rclip as receiver role, which connects to rcv_port of reflector, and send selected text to reflector;

why this 3 party design?

this is to get around firewall between remote host and local system; remote host is typicall a server, while local system is typically a client device like a laptop;

if you use VPN to remote access the server, there typically will be a firewall between server and local system, and that firewall will likely to block any connection initiated by server to the local system; so a simple client and server design won't work

rclip also send keepalive message every 40 seconds between reflector and sender to avoid firewall idle timeout the TCP connection;

security

rclip use TLS to secure communication between reflector, sender and receiver; it also uses client authentication with its own root CA to prevent spoof;

by default, rclip sender and receiver will check SAN(Subject Alternative Name) of reflector's certificate, to see the reflector's IP or FQDN match its certificate SAN; however this check could be skipped by using a hard coded "1.1.1.1" in SAN of reflector certificate when parameter "-loose" is specified; this is to avoid hassle to create a different certificate for each remote host; this of course decrease the overall security, but personally think it is acceptable trade-off given user typically specify the reflector address on local system directly;

build

rclip is coded with golang ver1.9, just use "go build" in the source directory to build the binary; golang pkg required:

• github.com/atotto/clipboard

install

since rclip use TLS and its own CA, so following key and certificates are needed to generated before installation:

• root CA cert/key
• reflector key/cert
• sender key/cert
• receiver key/cert

notes:

• there are many opensource tools could generate key and certs like openssl or XCA
• If you want to skip SAN check, make sure there is SubjectAltName extension with "1.1.1.1" as ip addresss in the certificate of reflector

rclip expect above key/certs located in following directory:

• Windows: [windows_user_dir]\appdata\AppData\Roaming\rclip
• Linux/OSX: $HOME/.rclip/

on remote host where tmux is running, following cert/keys with expected file name are needed:

• root CA cert: ca_cert
• reflector cert/key: refl_cert/refl_key
• receiver cert/key: rcv_cert/rcv_key

on local system, following cert/keys are needed:

• root CA cert: ca_cert
• sender key/cert: sender_cert/sender_key

all cert/key files's permission should be set that only owner could read

add following line in your .tmux.conf on remote host:

bind-key -T copy-mode-vi _your_key_of_choice_ send-keys -X copy-pipe "_rclip_install_path_/rclip"

this is an example:

bind-key -T copy-mode-vi y send-keys -X copy-pipe "/usr/local/bin/rclip"

note: if you want to skip SAN check, add "-loose"; e.g.

bind-key -T copy-mode-vi _your_key_of_choice_ send-keys -X copy-pipe "_rclip_install_path_/rclip -loose"

note: invoke rclip without any parameter, it will run as receiver, and connects to reflector on the same host, using default recv_port

usage

on remote host:

• start reflector process:

rclip -role refl

on local system:

• start sender process:

rclip -role sender -refl_ip <remote_host_ip>

note: if you want to skip SAN check, add "-loose"; e.g.

rclip -role sender -refl_ip <remote_host_ip> -loose

To make a remote copy: go into tmux copy mode on remote host, select some text, press the specified key, voila, the text are copied into local clipboard, secury & easy;

CLI Parameter

remote clipboard, version 1.1
flag provided but not defined: -?
Usage of rclip:
  -loose
        use hard coded address for reflector certificate SAN check
  -rcv_port uint
        specify the port for receiver on reflector (default 8891)
  -refl_ip string
        reflector listening ip address
  -role string
        specify the role, rcv/refl/sender (default "rcv")
  -send_port uint
        specify the port for sender on reflector (default 8890)

license

MIT; https://opensource.org/licenses/MIT