A tool for drawing betaflight/inav/ardupilot MSP Display Port OSD over OpenIPC video stream.
Click the image below to watch a video sample:
Usage: msposd [OPTIONS]
-m --master Serial port to receive MSP (%s by default)
-b --baudrate Serial port baudrate (%d by default)
-o --output UDP endpoint to forward aggregated MSP messages
-c --channels RC Channel to listen for commands (0 by default) and exec channels.sh. This option can be repeated to allow listening for several channels.
-w --wait Delay after each command received (2000ms default)
-r --fps Max MSP Display refresh rate(1..50)
-p --persist How long a channel value must persist to generate a command - for multiposition switches (0ms default)
-t --temp Read SoC temperature
-d --wfb Monitors wfb.log file and reports errors via HUD messages
-s --osd Parse MSP and draw OSD over the video
-a --ahi Draw graphic AHI, mode [0-No, 2-Simple 1-Ladder, 3-LadderEx (home indicator on ladder)]
-x --matrix OSD matrix [0- 53:20 , 1- 50:18 chars, 11- Variable font size, 9-bottom align 720p mode, 8-center align 720p mode]
--mspvtx Enable alpha mspvtx functionality
-v --verbose Show debug info
--help Display this help
Support for two font sizes. (on FullHD mode only!)
set --matrix to a value 11 or higher, each value represents a template to be used to map the OSD config.
--matrix 11 will use template 1. (click for a video sample)
All the OSD symbols in the red rectangles will be rendered using smaller font size. They will be aligned to the outer corner of each rectangle (up-left for the upper left one).
See: vtxmenu.ini
- Sections represent individual pages.
- Each section can contain one of the following:
- Submenus (which link to other sections).
- Options (which allow user selections).
- Commands (to perform specific actions).
- Submenus are links that navigate to other sections within the INI file.
-
Options follow a specific colon-separated format, with parameters in this order:
- Name - The display name of the option.
- Range/List - A numeric range or list of allowed values.
- Read Command - The command to retrieve the current value.
- Write Command - The command to update the value. Use the
{}placeholder to specify where the value will be placed in the write command.
- Range: A numeric range of allowed values (e.g.,
1-10). You can use decimal syntax to denote more precision0.1-20. - List: A comma-separated list of selectable options (e.g.,
On, Off, Auto).
-
Commands are colon-separated entries that define:
- Label - The text displayed to the user.
- Action - The command to be executed.
The safeboot stick command will run /usr/bin/safeboot.sh.
Example:
#!/bin/sh
cp /etc/wfb.conf /etc/wfb.conf_before_safeboot
cp /etc/majestic.yaml /etc/majestic.yaml_before_safeboot
cp /etc/wfb.conf_safeboot /etc/wfb.conf
cp /etc/majestic.yaml_safeboot /etc/majestic.yaml
reboot
This will copy a known good config to the right place and reboot.
Use Exit Camera menu stick command (one or more times) to exit all flightcontroller and VTX menu screens before.
msposd has alpha support for mspVTX to Betaflight. use the --mspvtx switch to activate this. This will configure Betaflight vtx tables with the supported channles by the vtx. You can switch channels from within Betaflight menu, Betaflight Configurator, SpeedyBee App, ELRS VTXAdmin.
Forwarding of MSP packets via UDP.
Can monitor RC Channels values in FC and call the script channels.sh (located at /usr/bin or /usr/sbin).Will passing the channel number and its value to it as $1 and $2 parameters. This allows for controlling the camera via the Remote Control Transmitter.
AHI (Artificial Horizon Indicator) ladder - Graphical AHI , that is drawn over the standard OSD.
Show custom mesage and diagnostics on screen when text is written to file /tmp/MSPOSD.msg
echo "Custom Message... &L04 &F22 CPU:&C &B temp:&T" >/tmp/MSPOSD.msg
Extra params withing the message to be shown:
- &T - Board temperature
- &W - WiFi module temperature (8812xx chipsets)
- &B - Video Bitrate and FPS
- &C - CPU Usage percent
- &t - Time
- &Fxx - Set text font size (10 to 99)
- &Lxx - Set text colour (first digit 0- white, 1 - black, 2- red, 3 - green, 4 - blue, 5 - yellow, 6 - magenta, 7 - cyan) and postion on the screen(second digit) 0-TopLeft, 1-TopCenter, 2-TopRight, 3-TopMoving,4-BottomLeft, 5-BottomCenter, 6-BottomRight, 7-BottomMoving
-&p - Dropped packet injections by wfb-ng
Custom elements can be added via the standard inav/bf/ardu OSD Configurator. A keyword needs to be added on the screen, that will be replaced by the corresponding widget.
This keywords can be added using the PilotName/CraftName fields(INAV/BF/Ardu), or custom Text Elements(INAV only).
!TWM!Camera board temp!TMW!WiFi module tem(only 8812EU2 chipsets supported)!RC!Sticks Position widget (Ground Side only)
msposd --master /dev/ttyS2 --baudrate 115200 -c 7 -c 9 --out 127.0.0.1:14555 -osd -r 20 --ahi 1 -v
Read on UART2 with baudrade 115200 and listen for value changes of RC channel 7 and channel 9 that come from the Remote Control via Flight Controller.
Every time the value is changed with more than 5% the bash script channels.sh {Channel} {Value} will be started with the provided parameters.
Forward MSP to UDP port 14555 so that it can be handled by wfb-ng and sent to the ground.
Draw an Artificial Horizon Indicator (AHI) Ladder with color-coded vertical steps.
The refresh rate of the OSD is limited to 20 frames per second, depending on the Flight Controller and MSP DisplayPort implementation, usually ranging between 12 and 17 frames per second.
Font files for each Flight Controller firmware have two versions—one for 720p and one for 1080p resolutions. They should be named font_hd.png and font.png respectively, and saved in the /usr/bin folder on the camera. They vary depending on the Flight Controller, so choose the appropriate pair. The program will read from /etc/majestic.yaml and will select the type of font to use based on the video resolution configured there.
Copy msposd for the architecture you need on the cam.
Prebuild binaries for x86, SigmaStar, Goke and Hisilicon are at release/ folder.
For SigmaStar based SoC (ssc338q, sc30kq) :
curl -L -o /usr/bin/msposd https://github.com/OpenIPC/msposd/releases/download/latest/msposd_star6e
chmod 755 /usr/bin/msposd
Copy the font files for your flight controller firmware INAV/ Betaflight/ ArduPilot from here https://github.com/openipc/msposd/tree/main/fonts
For INAV:
mkdir /usr/share/fonts
curl -k -L -o /usr/share/fonts/font.png https://raw.githubusercontent.com/openipc/msposd/main/fonts/inav/font.png
curl -k -L -o /usr/share/fonts/font_hd.png https://raw.githubusercontent.com/openipc/msposd/main/fonts/inav/font_hd.png
For Betaflight: preinstalled in OpenIPC firmware since Oct 2024
mkdir /usr/share/fonts
curl -k -L -o /usr/share/fonts/font.png https://raw.githubusercontent.com/openipc/msposd/main/fonts/betaflight/font.png
curl -k -L -o /usr/share/fonts/font_hd.png https://raw.githubusercontent.com/openipc/msposd/main/fonts/betaflight/font_hd.png
For Ardupilot:
Set
SERIALx_PROTOCOL = 42 replace x with the UART number.
OSD_TYPE = 5
To use betaflight fonts, set MSP_OPTIONS = 5 and copy fonts for betaflight as shown above.
If you prefer to use ardupilot "native" fonts (more icons), then set MSP_OPTIONS = 4 and copy the fonts below.
mkdir /usr/share/fonts
curl -k -L -o /usr/share/fonts/font.png https://raw.githubusercontent.com/openipc/msposd/main/fonts/ardupilot/font.png
curl -k -L -o /usr/share/fonts/font_hd.png https://raw.githubusercontent.com/openipc/msposd/main/fonts/ardupilot/font_hd.png
Start msposd or reference it in OpenIPC boot scripts.
curl -L -o /usr/bin/msposd curl -L -o /usr/bin/msposd https://github.com/OpenIPC/msposd/releases/download/latest/msposd_goke
#or
curl -L -o /usr/bin/msposd curl -L -o /usr/bin/msposd https://github.com/OpenIPC/msposd/releases/download/latest/msposd_hisi
chmod 755 /usr/bin/msposd
#Download an additional driver for Region Module
curl -k -L -o /lib/modules/4.9.37/goke/gk7205v200_rgn.ko https://github.com/OpenIPC/firmware/raw/89ded200eba00726930b8307ddaf573ac449f076/general/package/goke-osdrv-gk7205v200/files/kmod/gk7205v200_rgn.ko
sed -i "s!#insmod gk7205v200_rgn.ko!insmod gk7205v200_rgn.ko!g" "/usr/bin/load_goke"
reboot
On lower-end cameras like gk7205v200/v210 the OSD will work only in 1280x720 mode!
This mode uses one MSPOSD running on the air unit, receiving MSP DisplayPort data from the FC, aggregating it and sending it via wfb_ng to the ground.
On the ground another instance of MSPOSD renders these data and overlays it on the screen.
Tested on x86 Ubuntu 6.5.0.28
On the cam msposd can be started like this to forward via port 14550 (default mavlink, should not be used)
msposd --channels 7 --master /dev/ttyS2 --baudrate 115200 --out 127.0.0.1:14550 --matrix 11 --ahi 3 -r 30
On the ground:
msposd --master 127.0.0.1:14550 --osd -r 50 --ahi 3 --matrix 11 -v
Use ALT+Up/Down Arrow to center the AHI over horizon.
Q: I see a static map of all characters on the screen but no realtime OSD.
A: There are no data being received by the cam.
- Check your wiring. You need Tx/Rx/Gnd wires. Data lines must be crossed (Rx goes to Tx ).
- Check Inav/Ardu config. Enable MSP and OSD where needed! There is a separate option for OSD in INAV. Do not enable mavlink and msp on a single UART. (This is a bug in BF). Do not start msposd twice.
- On the cam. execute top , find the line for msposd, copy it (the whole line!) . Then killall msposd, add -v to the end of the line and start it.
Take a look at the console logs:
If they are stuck at step 1, there is no data on the UART. If there are lines past step 1, but OSD is not visible, the signal is not the format expected - MSP Display Port. Take a look in values in yellow, how much MSP packets were extracted from the signal, the total amount of bytes per second etc. Save this log to show it if requested.
Q: OSD changes, but I see strange symbols on the screen.
A: Download the appropriate font set for you flight controller software. Check for loose connectors, speed settings and make sure you have ground wire between the FC and the cam.
Q: With Betaflight, if AHI is shown but is not updated, even though msposd has "--ahi 1" argument and the telemetry is working.
A: Check your connections, specifically Camera's TX <-> FC RX. Camera needs to request extra data from Flight controller for this feature to work. Betaflight can be configured to allow readonly mode, but then extra features like RC channels control and AHI will not work.
- Default fonts included in this project are created by SNEAKY_FPV. These and other excellent additional fonts can be found here: https://sites.google.com/view/sneaky-fpv/home
This work is based on these projects: - https://github.com/fpv-wtf/msp-osd
- https://github.com/OpenIPC/osd