Merge pull request #2 from arendst/development

Update

.gitignore

@@ -13,6 +13,7 @@ build
 firmware.map
 firmware.asm
 tasmota*.bin
+tasmota*.bin.gz
 tasmota*.map
 platformio_override.ini
 

BUILDS.md

@@ -128,6 +128,7 @@
 |                       |   |   |   |   |   |   |   |
 | USE_IR_REMOTE         | - | - | x | x | x | x | x |
 | USE_IR_RECEIVE        | - | - | x | x | x | x | x |
+| USE_IR_REMOTE_FULL    | - | - | - | - | - | x | - | Enable ALL protocols
 |                       |   |   |   |   |   |   |   |
 | USE_SR04              | - | - | x | x | x | - | x |
 | USE_TM1638            | - | - | - | - | x | - | - |

RELEASENOTES.md

@@ -52,18 +52,34 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
 
 ## Changelog
 
-### Version 8.1.0.3
+### Version 8.1.0.8
 
 - Change Lights: simplified gamma correction and 10 bits internal computation
+- Change commands ``Prefix``, ``Ssid``, ``StateText``, ``NTPServer``, and ``FriendlyName`` displaying all items
+- Change IRremoteESP8266 library updated to v2.7.3
+- Change Zigbee command prefix from ``Zigbee*`` to ``Zb*``
+- Change wifi connectivity stability (#7602)
+- Change MQTT message size with additional 200 characters
 - Fix Sonoff Bridge, Sc, L1, iFan03 and CSE7766 serial interface to forced speed, config and disable logging
 - Fix commands ``Display`` and ``Counter`` from overruling command processing (#7322)
 - Fix ``White`` added to light status (#7142)
 - Fix Improved fade linearity with gamma correction
 - Fix LCD line and column positioning (#7387)
 - Fix Display handling of hexadecimal escape characters (#7387)
+- Fix ``WakeUp <x>`` ignores provided value (#7473)
+- Fix exception 9 restart on log message in Ticker interrupt service routines NTP, Wemos and Hue emulation (#7496)
+- Fix ``PowerDelta`` zero power detection (#7515)
+- Fix ``RGBWWTable`` ignored (#7572)
+- Fix PWM flickering at low levels (#7415)
+- Fix Hass sensor discovery part 1/4 by Federico Leoni (#7582, #7548)
+- Fix MaxPower functionality (#7647)
 - Add command ``SetOption79 0/1`` to enable reset of counters at teleperiod time by Andre Thomas (#7355)
 - Add command ``SetOption82 0/1`` to limit the CT range for Alexa to 200..380
+- Add command ``SetOption84 1`` to send AWS IoT device shadow updates (alternative to retained)
 - Add command ``ShutterButton <parameters>`` to control shutter(s) by to-scho (#7403)
+- Add commands ``SwitchMode 8`` ToggleMulti, ``SwitchMode 9`` FollowMulti and ``SwitchMode 10`` FollowMultiInverted (#7522)
+- Add commands ``SwitchMode 11`` PushHoldMulti and ``SwitchMode 12`` PushHoldInverted (#7603)
+- Add command ``Buzzer -1`` for infinite mode and command ``Buzzer -2`` for following led mode (#7623)
 - Add SerialConfig to ``Status 1``
 - Add WifiPower to ``Status 5``
 - Add support for DS1624, DS1621 Temperature sensor by Leonid Myravjev
@@ -73,3 +89,15 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
 - Add experimental support for NRF24L01 as BLE-bridge for Mijia Bluetooth sensors by Christian Baars (#7394)
 - Add support to BMP driver to enter reset state (sleep enable) when deep sleep is used in Tasmota
 - Add support for gzipped binaries
+- Add web page sliders when ``SetOption37 128`` is active allowing control of white(s)
+- Add most SetOptions as defines to my_user_config.h
+- Add SoftwareSerial to CSE7766 driver allowing different GPIOs (#7563)
+- Add optional parameter <startcolor> to command ``Scheme <scheme>, <startcolor>`` to control initial start color
+- Add rule trigger on one level deeper using syntax with two ``#`` like ``on zigbeereceived#vibration_sensor#aqaracubeside=0 do ...``
+- Add support for sensors DS18x20 and DHT family on Shelly 1 and Shelly 1PM using Shelly Add-On adapter (#7469)
+- Add support for MI-BLE sensors using HM-10 Bluetooth 4.0 module by Christian Staars (#7683)
+- Add BootCount Reset Time as BCResetTime to ``Status 1``
+- Add ``ZbZNPReceived``and ``ZbZCLReceived`` being published to MQTT when ``SetOption66 1``
+- Add optional Wifi AccessPoint passphrase define WIFI_AP_PASSPHRASE in my_user_config.h (#7690)
+- Add support for FiF LE-01MR energy meter by saper-2 (#7584)
+- Add new DHT driver. The old driver can still be used using define USE_DHT_OLD (#7468)

lib/IRremoteESP8266-2.7.2/README.md → lib/IRremoteESP8266-2.7.3/README.md

@@ -9,8 +9,8 @@
 This library enables you to **send _and_ receive** infra-red signals on an [ESP8266](https://github.com/esp8266/Arduino) or an
 [ESP32](https://github.com/espressif/arduino-esp32) using the [Arduino framework](https://www.arduino.cc/) using common 940nm IR LEDs and common IR receiver modules. e.g. TSOP{17,22,24,36,38,44,48}* demodulators etc.
 
-## v2.7.2 Now Available
-Version 2.7.2 of the library is now [available](https://github.com/crankyoldgit/IRremoteESP8266/releases/latest). You can view the [Release Notes](ReleaseNotes.md) for all the significant changes.
+## v2.7.3 Now Available
+Version 2.7.3 of the library is now [available](https://github.com/crankyoldgit/IRremoteESP8266/releases/latest). You can view the [Release Notes](ReleaseNotes.md) for all the significant changes.
 
 #### Upgrading from pre-v2.0
 Usage of the library has been slightly changed in v2.0. You will need to change your usage to work with v2.0 and beyond. You can read more about the changes required on our [Upgrade to v2.0](https://github.com/crankyoldgit/IRremoteESP8266/wiki/Upgrading-to-v2.0) page.

lib/IRremoteESP8266-2.7.2/README_fr.md → lib/IRremoteESP8266-2.7.3/README_fr.md

@@ -9,8 +9,8 @@
 Cette librairie vous permetra de **recevoir et d'envoyer des signaux** infrarouge sur le protocole [ESP8266](https://github.com/esp8266/Arduino) ou sur le protocole
 [ESP32](https://github.com/espressif/arduino-esp32) en utilisant le [Arduino framework](https://www.arduino.cc/) qui utilise la norme 940nm IR LEDs et le module basique de reception d'onde IR. Exemple : TSOP{17,22,24,36,38,44,48}* modules etc.
 
-## v2.7.2 disponible
-Version 2.7.2 de la libraire est maintenant [disponible](https://github.com/crankyoldgit/IRremoteESP8266/releases/latest). Vous pouvez voir le [Release Notes](ReleaseNotes.md) pour tous les changements importants.
+## v2.7.3 disponible
+Version 2.7.3 de la libraire est maintenant [disponible](https://github.com/crankyoldgit/IRremoteESP8266/releases/latest). Vous pouvez voir le [Release Notes](ReleaseNotes.md) pour tous les changements importants.
 
 #### mise à jour depuis pre-v2.0
 L'utilisation de la librairie à un peu changer depuis la version in v2.0. Si vous voulez l'utiliser vous devrez changer votre utilisation aussi. Vous pouvez vous renseigner sur les précondition d'utilisation ici : [Upgrade to v2.0](https://github.com/crankyoldgit/IRremoteESP8266/wiki/Upgrading-to-v2.0) page.

lib/IRremoteESP8266-2.7.2/ReleaseNotes.md → lib/IRremoteESP8266-2.7.3/ReleaseNotes.md

@@ -1,5 +1,22 @@
 # Release Notes
 
+## _v2.7.3 (20200130)_
+
+**[Features]**
+- Allow protocols to be enabled or disabled with compiler flags. (#1013, #1012)
+- Panasonic AC: Add Ion Filter support for DKE models. (#1025, #1024)
+- Add support for sending Sony at 38Khz (#1029, #1018, #1019)
+- auto_analyse_raw_data.py: Handle analysing messages with no headers. (#1017)
+
+**[Misc]**
+- Fix Coolix unit test errors when using Apple c++ compiler. (#1030, #1028)
+- Fix Apple clang c++ compiler error in unit tests. (#1027, #1026)
+- Improve/fix scraping of supported devices (#1022)
+- Panasonic PKR series A/C uses DKE protocol. (#1020, #1021)
+- Update NEC supported devices. (#1018)
+- Add note to avoid GPIO16 on the ESP8266 for receiving. (#1016, #1015)
+
+
 ## _v2.7.2 (20200106)_
 
 **[Bug Fixes]**