arpack-ng

ARPACK-NG is a collection of Fortran77 subroutines designed to solve large scale eigenvalue problems.

mandatory dependencies	optional dependencies	category
BLAS, LAPACK	MPI, Eigen3, Boost.Python	LinearAlgebra

About the project

This project started as a joint project between Debian, Octave and Scilab in order to provide a common and maintained version of arpack. This is now a community project maintained by a few volunteers. Indeed, no single release has been published by Rice university for the last few years and since many software (Octave, Scilab, R, Matlab...) forked it and implemented their own modifications, arpack-ng aims to tackle this by providing a common repository, maintained versions with a testsuite. arpack-ng is replacing arpack almost everywhere.

Important Features

• Reverse Communication Interface (RCI).
• Single and Double Precision Real Arithmetic Versions for Symmetric, Non-symmetric, Standard or Generalized Problems.
• Single and Double Precision Complex Arithmetic Versions for Standard or Generalized Problems.
• Routines for Banded Matrices - Standard or Generalized Problems.
• Routines for The Singular Value Decomposition.
• Example driver routines that may be used as templates to implement numerous
• Shift-Invert strategies for all problem types, data types and precision.
• arpackmm: utility to test arpack with matrix market files. Note: to run this utility, you need the eigen library (to handle RCI).

Documentation

Within DOCUMENTS directory there are three files for templates on how to invoke the computational modes of ARPACK.

• ex-sym.doc
• ex-nonsym.doc and
• ex-complex.doc

Also look in the README.MD file for explanations concerning the other documents.

ILP64 support

About ILP64 support:

• Sequential arpack supports ILP64, but, parallel arpack doesn't.
• Reminder: you can NOT mix ILP64 with LP64. If you compile arpack-ng with ILP64 (resp. LP64) support, you MUST insure your BLAS/LAPACK is compliant with ILP64 (resp. LP64).
• Set INTERFACE64 at configure time.

Note for F77/F90 developers:

• All files which needs ILP64 support must include "arpackicb.h".
• When coding, use i_int (defined in arpackicb.h) instead of c_int. i_int stands for ISO_C_BINDING integer: it's #defined to c_int or c_int64_t according to the architecture.

Note for C/C++ developers:

• All files which needs ILP64 support must include "arpackdef.h".
• When coding, use a_int (defined in arpackdef.h) instead of int. Here, a_int stands for "architecture int": it's #defined to int or int64_t according to the architecture.

Example: to test arpack with sequential ILP64 MKL assuming you use gnu compilers

$ ./bootstrap
$ export FFLAGS='-DMKL_ILP64 -I/usr/include/mkl'
$ export FCFLAGS='-DMKL_ILP64 -I/usr/include/mkl'
$ export LIBS='-Wl,--no-as-needed -L/usr/lib/x86_64-linux-gnu -lmkl_sequential -lmkl_core -lpthread -lm -ldl'
$ export INTERFACE64=1
$ ./configure --with-blas=mkl_gf_ilp64 --with-lapack=mkl_gf_ilp64
$ make all check

ISO_C_BINDING support

About ISO_C_BINDING support:

• The install will now provide arpack.h/hpp, parpack.h/hpp and friends.
• Examples of use can be found in ./TESTS and ./PARPACK/TESTS/MPI.

ISO_C_BINDING is a feature of modern Fortran meant to handle safely interoperability between Fortran and C (in practice, no more need to use ugly tricks to link F77 functions to C code using "underscored" symbols). Basically, ISO_C_BINDING make sure all fortran variables are typed (which may not always be the case when using implicit keyword in fortran): this way, C compilers can link properly. For more informations on ISO_C_BINDING, you can checkout the following links:

• http://fortranwiki.org/fortran/show/ISO_C_BINDING
• http://fortranwiki.org/fortran/show/Generating+C+Interfaces

Using ICB is seamless:

• Compile arpack-ng with ISO_C_BINDING: you'll get both old-fashion fortran symbols and new ISO_C_BINDING symbols available for linking.
• Add #include "arpack.h" in your C code.
• Replace all [sdcz][ae]upd calls by [sdcz][ae]upd_c: functions suffixed with _c are ISO_C_BINDING compliant (exposing same arguments than original fortran functions).

Example: to test arpack with ISO_C_BINDING

$ ./configure --enable-icb
$ cmake -D ICB=ON

Eigen support

arpack-ng provides C++ eigensolver based on both ISO_C_BINDING and eigen.

Check out ./EXAMPLES/MATRIX_MARKET/README for more details.

Example: to test arpack with eigen

$ mkdir build
$ cd build
$ cmake -D EXAMPLES=ON -D ICB=ON -D EIGEN=ON ..
$ make all check

Python support

pyarpack: python support based on Boost.Python.Numpy exposing C++ API. pyarpack exposes in python the arpack-ng C++ eigensolver (based on eigen).

Check out ./EXAMPLES/PYARPACK/README for more details.

Example: to test arpack with python3

$ mkdir build
$ cd build
$ cmake -D EXAMPLES=ON -D ICB=ON -D EIGEN=ON -D PYTHON3=ON ..
$ make all check

📁 Directory structure

• You have successfully unbundled ARPACK-NG` and are now in the ARPACK-NG directory that was created for you.

• The directory SRC contains the top level routines including the highest level reverse communication interface routines

  • ssaupd, dsaupd: symmetric single and double precision
  • snaupd, dnaupd: non-symmetric single and double precision
  • cnaupd, znaupd: complex non-symmetric single and double precision
  • The headers of these routines contain full documentation of calling sequence and usage.
  • Additional information is given in the /DOCUMENTS directory.

• The directory PARPACK contains the Parallel ARPACK routines.

• Example driver programs that illustrate all the computational modes, data types and precisions may be found in the EXAMPLES directory. Upon executing the ls EXAMPLES command you should see the following directories

  ├── BAND
  ├── COMPLEX
  ├── Makefile.am
  ├── MATRIX_MARKET
  ├── NONSYM
  ├── PYARPACK
  ├── README
  ├── SIMPLE
  ├── SVD
  └── SYM

  • Example programs for banded, complex, nonsymmetric, symmetric, and singular value decomposition may be found in the directories BAND, COMPLEX, NONSYM, SYM, SVD respectively.
  • Look at the README file for further information.
  • To get started, get into the SIMPLE directory to see example programs that illustrate the use of ARPACK in the simplest modes of operation for the most commonly posed standard eigenvalue problems.

Example programs for Parallel ARPACK may be found in the directory PARPACK/EXAMPLES. Look at the README file for further information.

Install 🚀

Getting arpack-ng

Unlike ARPACK, ARPACK-NG is providing autotools and cmake based build system. In addition, ARPACK-NG also provides ISO_C_BINDING support, which enables to call fortran subroutines natively from C or C++.

First, obtain the source code 📥 from github:

$ git clone https://github.com/opencollab/arpack-ng.git
$ cd ./arpack-ng

If you prefer the ssh to obtain the source code, then use:

$ git clone [email protected]:opencollab/arpack-ng.git
$ cd ./arpack-ng

Note, It is recommended to install arpack at standard location on your system by using your root privilege.

Using autotools

In the source directory, use the following commands to configure, build and install arpack-ng.

$ sh bootstrap
$ ./configure --enable-mpi
$ make
$ make check
$ sudo make install

Congratulations 🎉, you have installed arpack lib using autotools (caution: you need sudo to install in your system).

The above-mentioned process will build everything including the examples and parallel support using MPI.

Using cmake

You can install ARPACK-NG by using cmake. If you do not have cmake, then please download the binary from pip using:

$ python3 -m pip install cmake
$ which cmake && cmake --version

After installing cmake, follow the instruction given below.

Caution: Make sure you are in source directory of ARPACK-NG.

$ mkdir build
$ cd build
$ cmake -D EXAMPLES=ON -D MPI=ON -D BUILD_SHARED_LIBS=ON ..
$ make
$ sudo make install

✨ Congratulations, you have installed arpack lib using cmake (caution: you need sudo to install in your system).

The above-mentioned process will build everything including the examples and parallel support using MPI.

Customize build / install

You can also customize the installation of arpack using the autotools.

To customize the install directories:

$ LIBSUFFIX="64" ./configure
$ make all install

To enable ILP64 support:

$ INTERFACE64="1" ITF64SUFFIX="ILP64" ./configure
$ make all install

To enable ISO_C_BINDING support:

$ ./configure --enable-icb

You can customize the build by declaring the cmake options during configuration.

To customize the install directories:

$ cmake -D LIBSUFFIX="64" ..
$ make all install

To enable ILP64 support:

$ cmake -D INTERFACE64=ON -D ITF64SUFFIX="ILP64" ..
$ make all install

To enable ISO_C_BINDING support:

$ cmake -D ICB=ON

Supported Operating Systems:

Linux support

arpack-ng runs on debian-based distros.

Mac OS support

On mac OS, with GNU compilers, you may need to customize options:

$ LIBS="-framework Accelerate" FFLAGS="-ff2c -fno-second-underscore" FCFLAGS="-ff2c -fno-second-underscore" ./configure

Windows support

arpack-ng can be installed on Windows as a MinGW-w64 package via various distribution, for example through MSYS2 with pacman -S mingw-w64-x86_64-arpack. It can also be built and installed through vcpkg with vcpkg install arpack-ng.

Using arpack-ng from your own codebase

The *.pc and *.cmake files provided by arpack-ng are only pointing to arpack libraries. If you need other libraries (like MPI), you must add them alongside arpack (see CMake example below).

Typically, if you need

• ARPACK: at compile/link time, you'll need to provide BLAS and LAPACK.

• ARPACK with eigen support (arpackSolver): at compile/link time, you'll need to provide BLAS, LAPACK and Eigen.

• PARPACK: at compile/link time, you'll need to provide BLAS, LAPACK and MPI.

Examples are provided in tstCMakeInstall.sh and tstAutotoolsInstall.sh generated after running cmake/configure.

With autotools

First, set PKG_CONFIG_PATH to the location in the installation directory where arpack.pc lies.

Then, insert the following lines in your configure.ac:

PKG_CHECK_MODULES([ARPACK], [arpack])
AC_SUBST([ARPACK_CFLAGS])
AC_SUBST([ARPACK_LIBS])

Note: make sure you have installed pkg-config.

With CMake

You can use arpack in your CMake builds by using ARPACK::ARPACK target. For example,

FIND_PACKAGE(arpackng)
ADD_EXECUTABLE(main main.f)
TARGET_INCLUDE_DIRECTORIES(main PUBLIC ARPACK::ARPACK)
TARGET_LINK_LIBRARIES(main ARPACK::ARPACK)

To use PARPACK in your Cmake builds, use PARPACK::PARPACK target:

FIND_PACKAGE(arpackng)
FIND_PACKAGE(MPI REQUIRED COMPONENTS Fortran)
ADD_EXECUTABLE(main main.f)
TARGET_INCLUDE_DIRECTORIES(main PUBLIC PARPACK::PARPACK)
TARGET_LINK_LIBRARIES(main PARPACK::PARPACK)
TARGET_INCLUDE_DIRECTORIES(main PUBLIC MPI::MPI_Fortran)
TARGET_LINK_LIBRARIES(main MPI::MPI_Fortran)

Note: Make sure to update CMAKE_MODULE_PATH env variable (otheriwse, find_package won't find arpack-ng cmake file).

FAQ

• Where can I find ARPACK user's guide?

  http://li.mit.edu/Archive/Activities/Archive/CourseWork/Ju_Li/MITCourses/18.335/Doc/ARPACK/Lehoucq97.pdf

• Calling arpack's aupd methods returns info = -9 - Starting vector is zero.: why?

  Residuals are null. Try to set resid to small values (like epsilon machine magnitude) but not exactly zero. Residuals resid = A*v - lamdba*v target exactly the zero vector. When resid is close enough to zero, the iterative procedure stops.

• Say I have an estimate of an eigen value, how to give this information to arpack?

  You need to shift of an amount of about this estimate of lambda. Grep backTransform in arpackSolver.hpp to see an example. For more informations, checkout "NUMERICAL METHODS FOR LARGE EIGENVALUE PROBLEMS" by Yousef Saad: https://www-users.cse.umn.edu/~saad/eig_book_2ndEd.pdf (paragraph 4.1.2. and section 4.1.).

• Say I have an estimate of an eigen vector, how to give this information to arpack?

  You need to copy this eigen vector estimate in v (not resid) and set info to 1 before calling aupd methods. The v vector targets a non-null vector such that resid = 0, that is, such that A*v = lambda*v.

• Using PARPACK, I get incorrect eigen values.

  Make sure each MPI processor handles a subpart of the eigen system (matrices) only. ARPACK handles and solves the whole eigen problem (matrices) at once. PARPACK doesn't: each MPI processor must handle and solve a subpart of the eigen system (matrices) only (independently from the other processors). See examples for Fortran in folder PARPACK/EXAMPLES/MPI, and for C/C++ examples in PARPACK/TESTS/MPI/icb_parpack_c.c and PARPACK/TESTS/MPI/icb_parpack_cpp.cpp

Using MKL instead of BLAS / LAPACK

How to use arpack-ng with Intel MKL:

• Let autotools/cmake find MKL for you based on pkg-config files (setting PKG_CONFIG_PATH) or cmake options (BLA_VENDOR=Intel).
• Refers to the Intel Link Advisor: https://www.intel.com/content/www/us/en/developer/tools/oneapi/onemkl-link-line-advisor.html.

Good luck and enjoy 🎊