R. Todd Evans (mailto:[email protected]) Bill Barth (mailto:[email protected])
John Hammond
The tacc_stats package provides the tools to monitor resource usage of HPC systems at multiple levels of resolution.
The package is split into an autotools-based monitor subpackage and a Python setuptools-based tacc_stats subpackage. monitor performs the online data collection and transmission in a production environment while tacc_stats performs the data curation and analysis in an offline environment.
Installing monitor will build and install an System V service, /etc/init.d/taccstats. This service launches a daemon with an overhead of 3-9% on a single core when configured to sample at a frequency of 1Hz. It is typically configured to sample at 10 minute intervals, with samples taken at the start and end of every job as well. tacc_stats sends the data directly to a RabbitMQ server over the administrative ethernet network. RabbitMQ must be installed and running on the server in order for the data to be received.
Installing the tacc_stats module will setup a Django-based web application along with tools for extracting the data from the RabbitMQ server and feeding them into a PostgreSQL database.
To get access to the tacc_stats source code clone this repository:
git clone https://github.com/TACC/tacc_stats
First ensure the RabbitMQ library and header file are installed on the build and compute nodes
librabbitmq-devel-0.5.2-1.el6.x86_64
./configure --enable-rabbitmq; make; make install will then successfully build the tacc_stats executable for many systems. If Xeon Phi coprocessors are present on your system they can be monitored with the --enable-mic flag. Additionally the configuration options, --disable-infiniband, --disable-lustre, --disable-hardware will disable infiniband, Lustre Filesystem, and Hardware Counter monitoring. Not enabling RabbitMQ will result in a legacy build of tacc_stats that relies on the shared filesystem to transmit data. This mode is not recommended. If libraries or header files are not found than add their paths to the include and library paths with the CPPFLAGS and/or LDFLAGS vars as usual.
There will be a configuration file, /etc/tacc_stats.conf, after installation. This file contains the fields
SERVER=localhost
QUEUE=default
PORT=5672
FREQ=600
SERVER should be set to the RabbitMQ server, QUEUE to the system name, PORT to the RabbitMQ port (5672 should be ok), and FREQ to the desired sampling frequency in seconds.
An RPM can be built for subpackage deployment using the tacc_statsd.spec file. The most straightforward approach to build this
is to setup your rpmbuild directory then
rpmbuild -ba tacc_statsd.spec --define 'rmqserver rabbitmqservername' --define 'system systemname'
where the rmqserver will be the RabbitMQ SERVER hostname and system will be the QUEUE in tacc_stats.conf.
After installation the executable /opt/tacc_statsd/tacc_stats, service /etc/init.d/taccstats, and config file /etc/tacc_stats.conf should exist. If the rpm was used for installation tacc_stats will be chkconfig'd to start at boot time and be running.
tacc_stats can be started, stopped, and restarted using taccstats start, taccstats stop, and taccstats restart.
In order to notify tacc_stats of a job beginning echo the job id into /var/run/TACC_jobid. It order to notify
it of a job ending echo - into /var/run/TACC_jobid. This can be accomplished in the job scheduler prolog and
epilog for example.
In order for tacc_stats to correcly label records with JOBIDs it is required that the job scheduler prolog and epilog contain the lines
echo $JOBID > jobid_file
and
echo - > jobid_file
To perform the pickling of this data it is also necessary to generate an accounting file that contains at least the JOBID and time range that the job ran. The pickling will currently work without modification on SGE job schedulers. It will also work on any accounting file with the format
Job ID ($JOBID) : User ID ($UID) : Project ID ($ACCOUNT) : Junk ($BATCH) : Start time ($START) : End time ($END) : Time job entered in queue ($SUBMIT) : SLURM partition ($PARTITION) : Requested Time ($LIMIT) : Job name ($JOBNAME) : Job completion status ($JOBSTATE) : Nodes ($NODECNT) : Cores ($PROCS)
for each record using the SLURM interface (set by the batch_system field in the site-specific configuration file). In addition to the accounting file, a directory of host-file logs (hosts belonging to a particular job) must be
generated. The host file directories should have the form
/year/month/day/hostlist.JOBID
with hostlist.JOBID listing the hosts allocated to the job in a single column.
The accounting file and host-file logs will be used to map JOBID's to time and node ranges so that the job-level data can be extracted from the raw data efficiently.
To install TACC Stats on the machine where data will be processed, analyzed, and the webserver hosted follow these steps:
- Download the package and setup the Python virtual environment.
$ virtualenv machinename --system-site-packages
$ cd machinename; source bin/activate
$ git clone https://github.com/TACC/tacc_stats
tacc_stats is a pure Python package. Dependencies should be automatically downloaded
and installed when installed via pip. The package must first be configured however.
2. The initialization file, tacc_stats.ini, controls all the configuration options and has
the following content and descriptions
## Basic configuration options - modify these
# machine = unique name of machine/queue
# server = database and rmq server hostname
# data_dir = where data is stored
[DEFAULT]
machine = ls5
data_dir = /hpc/tacc_stats_site/%(machine)s
server = tacc-stats02.tacc.utexas.edu
## RabbitMQ Configuration
# RMQ_SERVER = RMQ server
# RMQ_QUEUE = RMQ server
[RMQ]
rmq_server = %(server)s
rmq_queue = %(machine)s
## Configuration for Web Portal Support
[PORTAL]
acct_path = %(data_dir)s/accounting/tacc_jobs_completed
host_list_dir = %(data_dir)s/hostfile_logs
pickles_dir = %(data_dir)s/pickles
archive_dir = %(data_dir)s/archive
host_name_ext = %(machine)s.tacc.utexas.edu
batch_system = SLURM
Set these paths as needed. The raw stats data will be stored in the archive_dir and processed stats data in the pickles_dir. machine should match the system name used in the RabbitMQ server QUEUE field. This is the only field that needs to match
anything in the monitor subpackage.
3. Install tacc_stats
$ pip install tacc_stats/
- Start the RabbitMQ server reader in the background, e.g.
$ nohup listend.py > /tmp/listend.log
Raw stats files will now be generated in the archive_dir.
5. A PostgreSQL database must be setup on the host. To do this, after installation of PostgreSQL
and the tacc_stats Python module
$ sudo su - postgresql
$ psql
# CREATE DATABASE machinename_db;
# CREATE USER taccstats WITH PASSWORD 'taccstats';
# ALTER ROLE taccstats SET client_encoding TO 'utf8';
# ALTER ROLE taccstats SET default_transaction_isolation TO 'read committed';
# ALTER ROLE taccstats SET timezone TO 'UTC';
# GRANT ALL PRIVILEGES ON DATABASE machinename_db TO taccstats;
# \q
then
$ python manage.py migrate
This will generate a table named machinename_db in your database.
- Setup cron jobs to process raw data and ingest into database. Add the following to your cron file
*/15 * * * * source /home/rtevans/testing/bin/activate; job_pickles.py; update_db.py > /tmp/ls5_update.log 2>&1
- Next configure the Apache server (make sure it is installed and the
mod_wsgiApache module is installed) A sample configuration file,/etc/httpd/conf.d/ls5.conf, looks like
LoadModule wsgi_module modules/mod_wsgi.so
WSGISocketPrefix run/wsgi
<VirtualHost *:80>
ServerAdmin [email protected]
ServerName tacc-stats02.tacc.utexas.edu
ServerAlias ls5-stats.tacc.utexas.edu
WSGIDaemonProcess ls5 python-path=/usr/lib/python2.7/site-packages:/home/rtevans/tacc_stats
WSGIProcessGroup ls5
WSGIScriptAlias / /home/rtevans/tacc_stats/tacc_stats/site/tacc_stats_site/wsgi.py
WSGIApplicationGroup %{GLOBAL}
<Directory /home/rtevans/tacc_stats/tacc_stats/site/tacc_stats_site>
<Files wsgi.py>
Require all granted
</Files>
</Directory>
</VirtualHost>
- Start up Apache
job_pickles.py can be run manually by:
$ ./job_pickles.py [-start date_start] [-end date_end] [-dir directory] [-jobids id0 id1 ... idn]
where the 4 optional arguments have the following meaning
-dir: the directory to store pickled dictionaries-start: the start of the date range, e.g."2013-09-25 00:00:00"-end: the end of the date range, e.g."2013-09-26 00:00:00"jobids: individual jobids to pickle
No arguments results in all jobs from the previous day getting pickled and stored in the pickles_dir
defined in setup.cfg. On Stampede argumentless job_pickles.py is run every 24 hours as a cron job
set-up by the user
For pickling data with Intel Sandy Bridge core and uncore counters it is useful to
modify the event_map dictionaries in intel_snb.py to include whatever events you are counting.The dictionaries map a control register value to a Schema name.
You can have events in the event_map dictionaries that you are not counting,
but if missing an event it will be labeled in the Schema with it's control register
value.
Pickled stats data will be placed in the directory specified by
pickles_dir. The pickled data is contained in a nested python
dictionary with the following key layers:
job : 1st key Job ID
host : 2nd key Host node used by Job ID
type : 3rd key TYPE specified in tacc_stats
device : 4th key device belonging to type
For example, to access Job ID 101's stats data on host c560-901 for
TYPE intel_snb for device cpu number 0 from within a python script:
pickle_file = open('101','r')
jobid = pickle.load(pickle_file)
pickle_file.close()
jobid['c560-901']['intel_snb']['0']
The value accessed by this key is a 2D array, with rows corresponding to record times and columns to specific counters for the device. To view the names for each counter add
jobid.get_schema('intel_snb')
or for a short version
jobid.get_schema('intel_snb').desc
(C) 2011 University of Texas at Austin
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA