Change made through this commit:
- Include copy of flog as a seperate tree.
- Modify the makefile to add and compile flog code.

Signed-off-by: prakritigoyal19 <[email protected]>

CID 302713 (checkpoint-restore#1 of 1): Missing varargs init or cleanup (VARARGS)
 va_end was not called for argptr.

Signed-off-by: Adrian Reber <[email protected]>

Separate commit for easier criu-dev <-> master transfer.

Acked-by: Mike Rapoport <[email protected]>
Signed-off-by: Adrian Reber <[email protected]>

It is mapped, not maped. Same applies for mmap I guess.

Found by codespell, except it wants to change it to mapped,
which will make it less specific.

Signed-off-by: Kir Kolyshkin <[email protected]>

Brought to you by

    codespell -w

(using codespell v2.1.0).

[v2: use "make indent" on the result]

Signed-off-by: Kir Kolyshkin <[email protected]>

Fixes: checkpoint-restore#2121

Signed-off-by: Pengda Yang <[email protected]>

The TOS(type of service) field in the ip header allows you specify the
priority of the socket data.

Signed-off-by: Suraj Shirvankar <[email protected]>

Signed-off-by: Suraj Shirvankar <[email protected]>

The pipe_size type is unsigned int, when the fcntl call fails and
return -1, it will cause a negative rollover problem.

Signed-off-by: zhoujie <[email protected]>

Newer Intel CPUs (Sapphire Rapids) have a much larger xsave area than
before. Looking at older CPUs I see 2440 bytes.

    # cpuid -1 -l 0xd -s 0
    ...
        bytes required by XSAVE/XRSTOR area     = 0x00000988 (2440)

On newer CPUs (Sapphire Rapids) it grows to 11008 bytes.

    # cpuid -1 -l 0xd -s 0
    ...
        bytes required by XSAVE/XRSTOR area     = 0x00002b00 (11008)

This increase the xsave area from one page to four pages.

Without this patch the fpu03 test fails, with this patch it works again.

Signed-off-by: Adrian Reber <[email protected]>

Signed-off-by: Adrian Reber <[email protected]>

Signed-off-by: Adrian Reber <[email protected]>

Using the fact that we know criu_pid and criu is a parent of restored
process we can create pidfile with pid on caller pidns level.

We need to move mount namespace creation to child so that criu-ns can
see caller pidns proc.

Signed-off-by: Pavel Tikhomirov <[email protected]>

By default, the file name 'amdgpu_plugin.txt' is used also as the name
for the corresponding man page (`man amdgpu_plugin`). However, when
this man page is installed system-wide it would be more appropriate
to have a prefix 'criu-' (e.g., `man criu-amdgpu-plugin`).

Signed-off-by: Radostin Stoyanov <[email protected]>

crun wants to set empty_ns and this interface is missing from the
library. This adds it to libcriu.

Signed-off-by: Adrian Reber <[email protected]>

--criu-binary argument provides a way to supply the CRIU binary
location to run_criu().

Related to: checkpoint-restore#1909

Signed-off-by: Dhanuka Warusadura <[email protected]>

These changes remove and update the changes introduced in
7177938 in favor of the
Python version in CI.

os.waitstatus_to_exitcode() function appeared in Python 3.9

Related to: checkpoint-restore#1909

Signed-off-by: Dhanuka Warusadura <[email protected]>

These changes add test implementations for criu-ns script.

Fixes: checkpoint-restore#1909

Signed-off-by: Dhanuka Warusadura <[email protected]>

These changes fix the `ImportError: No module named pathlib`
error when executing criu-ns tests located at criu/test/others/criu-ns

Signed-off-by: Dhanuka Warusadura <[email protected]>

CentOS 7 CI environment uses Python 2. To execute criu-ns
script in CentOS 7 changing the current shebang line to
python is required.

This reverse the changes made in a15a63f

Signed-off-by: Dhanuka Warusadura <[email protected]>

This is a patch proposed by Thomas here:
https://lore.kernel.org/all/87ilczc7d9.ffs@tglx/

It removes (created id > desired id) "sanity" check and adds proper
checking that ids start at zero and increment by one each time when we
create/delete a posix timer.

First purpose of it is to fix infinite looping in create_posix_timers on
old pre 3.11 kernels.

Second purpose is to allow kernel interface of creating posix timers
with desired id change from iterating with predictable next id to just
setting next id directly. And at the same time removing predictable next
id so that criu with this patch would not get to infinite loop in
create_posix_timers if this happens.

Thanks a lot to Thomas!

Signed-off-by: Pavel Tikhomirov <[email protected]>

This hook allows to start image streamer process from an action script.

Signed-off-by: Radostin Stoyanov <[email protected]>

…tions

This does cgroup namespace creation separately from joining task
cgroups. This makes the code more logical, because creating cgroup
namespace also involves joining cgroups but these cgroups can be
different to task's cgroups as they are cgroup namespace roots
(cgns_prefix), and mixing all of them together may lead to
misunderstanding.

Another positive thing is that we consolidate !item->parent checks in
one place in restore_task_with_children.

Signed-off-by: Valeriy Vdovin <[email protected]>
Signed-off-by: Pavel Tikhomirov <[email protected]>

4.15-based kernels don't allow F_*SEAL for memfds created with MFD_HUGETLB.
Since seals are not possible in this case, fake F_GETSEALS result as if it
was queried for a non-sealing-enabled memfd.

Signed-off-by: Michał Mirosław <[email protected]>

Linux 4.15 doesn't like empty string for cgroup2 mount options.
Pass NULL then to satisfy the kernel check. Log the options for
easier debugging.

Signed-off-by: Michał Mirosław <[email protected]>

The original commit added saving THP_DISABLED flag value, but missed
restoring it. There is restoring code, but used only when --lazy_pages
mode is enabled. Restore the prctl flag always. While at it, rename the
`has_thp_enabled` -> `!thp_disabled` for consistency.

Fixes: bbbd597 (2017-06-28 "mem: add dump state of THP_DISABLED prctl")
Signed-off-by: Michał Mirosław <[email protected]>

If prctl(SET_THP_DISABLE) is not used due to bad semantics, log it
for easier debugging.

Signed-off-by: Michał Mirosław <[email protected]>

While at it, don't carry over stale errno to the fail() message.

Signed-off-by: Michał Mirosław <[email protected]>

Signed-off-by: Michał Mirosław <[email protected]>

Add a sanity check for THP_DISABLE. This discovered a broken commit
in Google's kernel tree.

Signed-off-by: Michał Mirosław <[email protected]>

Apparently Skylake uses init-optimization when saving FPU state, and ptrace()
returns XSTATE_BV[0] = 0 meaning FPU was not used by a task (in init state).
Since CRIU restore uses sigreturn to restore registers, FPU state is always
restored. Fill the state with default values on dump to make restore happy.

Signed-off-by: Michał Mirosław <[email protected]>

This commit revises the error handling in the fdspy test. Previously,
a failure case could have been incorrectly reported as successful because
of a specific check `pass != 0`, leading to potential false positives
when `check_pipe_ends()` returned `-1` due to a read/write pipe error.

To improve this, we've adjusted the error handling to return `0` in case
of any error. As such, the final success condition remains unchanged. This
approach will help accurately differentiate between successful and failed
cases, ensuring the output "All OK" is printed for success, and "Something
went WRONG" for any failure.

Fixes: 5364ca3 ("compel/test: Fix warn_unused_result")

Signed-off-by: Haorong Lu <[email protected]>

Signed-off-by: Michał Mirosław <[email protected]>

Signed-off-by: Michał Mirosław <[email protected]>

Signed-off-by: Michał Mirosław <[email protected]>

Use $TMPDIR for tests_root as the host's /tmp might not have enough
features or space.

Signed-off-by: Michał Mirosław <[email protected]>

Extend ability to limit time taken to all CRIU invocations.

Signed-off-by: Michał Mirosław <[email protected]>

We don't want test framework to change its behaviour on whether we
run a single or multiple tests in a run. When we shard the test suite
it can result in some shards having a single test to run and
unexpectedly change the test output format.

Signed-off-by: Michał Mirosław <[email protected]>

Allow to split test suite into predictable sets to parallelize runs on
multiple machines or VMs.

Signed-off-by: Michał Mirosław <[email protected]>

Make it clear that the option numbers are indexes not the option
identifiers ("names"). Also show the value change that prompted test
failure.

Signed-off-by: Michał Mirosław <[email protected]>

Make it possible to skip network lock to enable uses that break connections
anyway to work without iptables/nftables being present.

Signed-off-by: Michał Mirosław <[email protected]>

The fail() macro provides a new line character at the end of the
message. This patch fixes the following lint check that currently
fails in CI:

$ git --no-pager grep -E '^\s*\<(pr_perror|fail)\>.*\\n"'
test/zdtm/static/thp_disable.c:		fail("prctl(GET_THP_DISABLE) returned unexpected value: %d != 1\n", ret);
test/zdtm/static/thp_disable.c:		fail("Flags changed %lx -> %lx\n", orig_flags, new_flags);
test/zdtm/static/thp_disable.c:		fail("Madvs changed %lx -> %lx\n", orig_madv, new_madv);
test/zdtm/static/thp_disable.c:		fail("post-migration prctl(GET_THP_DISABLE) returned unexpected value: %d != 1\n", ret);
test/zdtm/static/thp_disable.c:		fail("Flags changed %lx -> %lx\n", orig_flags, new_flags);
test/zdtm/static/thp_disable.c:		fail("Madvs changed %lx -> %lx\n", orig_madv, new_madv);

Fixes: checkpoint-restore#2193

Signed-off-by: Radostin Stoyanov <[email protected]>

During dump, CRIU stores the structs representing sockets in a statically sized
hashmap of size 32. We have some (admittedly crazy) tasks that use tens of
thousands of sockets, and seem to spend most of the dump time iterating over
the linked lists of the map.

16K is chosen arbitrarily, so that it reduces the lengths of the chains to few
elements on average, while not introducing significant memory overhead.

From: Radosław Burny <[email protected]>
Signed-off-by: Michał Mirosław <[email protected]>

From: Piotr Figiel <[email protected]>
Signed-off-by: Michał Mirosław <[email protected]>

Try IPv6 if IPv4 sockets are not supported.

Signed-off-by: Michał Mirosław <[email protected]>

Signed-off-by: Michał Mirosław <[email protected]>

The test for HAS_MEMFD is empty and noit used. Remove it.

Fixes: 5ee1ac1 ("criu: remove FEATURE_TEST_MEMFD")
Change-Id: I43b8f0cfd50ce9bdf93dafb647377318df1deae8
Signed-off-by: Michał Mirosław <[email protected]>

`make` without `-s` option will normally show the commands executed. In
the case of detecting build environment features current makefile will
cause detected features to be seen as 'echo #define' commands, but not
detected ones will be silent. Change it so that all tried features can
be seen (outside of make's silent mode) regardless of detection result.

Signed-off-by: Michał Mirosław <[email protected]>

$LDFLAGS can contain `-Ldir`s that are required by '-lib's in $LIBS.
Reverse the order so that `-L` options make effect.

Signed-off-by: Michał Mirosław <[email protected]>

Make $(AR) used also for libzdtmtst build.

Signed-off-by: Michał Mirosław <[email protected]>

When trying to build CRIU with libbsd enabled the compilation fails due
to duplicate definition of __aligned macro. Other such definitions are
already wrapped with #ifndef make __aligned definition consistent and
make it easier in the future to use the libbsd features if needed.

Signed-off-by: Michał Mirosław <[email protected]>

nla_get_s32() was added to libnl 3.2.7 in 2015. Remove CRIU's definition
as it breaks build when statically linking the binary.

From: Uros Prestor <[email protected]>
Signed-off-by: Michał Mirosław <[email protected]>

Container runtimes commonly use CRIU with RPC. However, this prevents
the use of action-scripts set in a CRIU configuration file due to the
explicit scripts mode introduced with the following commit:

  ac78f13
  actions: Introduce explicit scripts mode

This patch enables container checkpoint/restore with action-scripts
specified via configuration file.

Signed-off-by: Radostin Stoyanov <[email protected]>

Signed-off-by: Radostin Stoyanov <[email protected]>

New 'query-ext-files' action for `criu dump` is sent after
freezing the process tree. This allows to defer gathering
the external file list when the process tree is in a stable
state and avoids race with the process creating and deleting
files.

Change-Id: Iae32149dc3992dea086f513ada52cf6863beaa1f
Signed-off-by: Michał Mirosław <[email protected]>

Google's RPC client process is in a different pidns and has more privileges --
CRIU can't open its /proc/<pid>/fd/<fd>.  For images_dir_fd to be useful here
it would need to refer to a passed or CRIU's fd.

From: Michał Cłapiński <[email protected]>
Change-Id: Icbfb5af6844b21939a15f6fbb5b02264c12341b1
Signed-off-by: Michał Mirosław <[email protected]>

If the error is ignored it is not important enough - make it a warning
instead.

From: Mian Luo <[email protected]>
Change-Id: If2641c3d4e0a4d57fdf04e4570c49be55f526535
Signed-off-by: Michał Mirosław <[email protected]>

kerndat_nsid() is not used outside kerndat.c. Make it static.

Change-Id: I52e518ecb7c627cc1866e373411b2be3f71a2c9d
Signed-off-by: Michał Mirosław <[email protected]>

If not dumping netns nor connections, nsid support is not used. Don't
fail the run as if the support is needed, the dumping process will fail
later.

Change-Id: I39a086756f6d520c73bb6b21eaf6d9fb49a18879
Signed-off-by: Michał Mirosław <[email protected]>

Instead of relying on chance of CLOCK_MONOTONIC reading being unique,
use pid namespace ID that combined with the process ID will make it
unique on the machine level.

If pidns is not enabled on a kernel we'll get ENOENT, but then CRIU's
pid will already be unique. If there is some other error, log it but
continue, as the socket clash (if it happens) will result in a failed
run anyway.

Fixes: 45e048d (2022-03-31 "criu: generate unique socket names")
Fixes: 408a7d8 (2022-02-12 "util: add an unique ID of the current criu run")
Change-Id: I111c006e1b5b1db8932232684c976a84f4256e49
Signed-off-by: Michał Mirosław <[email protected]>

With the parasite socket clash now guaranteed not to happen,
the comment becomes obsolete. netns is steel needed though, so
update the comment to point at the requirement.

Change-Id: I3cfb253cd5c53b91b955fcb001530b4aee5129f4
Signed-off-by: Michał Mirosław <[email protected]>

Instead of opening the image directly, the commit refactors the
asciinema image embedded link to redirect users to the corresponding
video.

Signed-off-by: Abhishek Guleri <[email protected]>

Signed-off-by: Radostin Stoyanov <[email protected]>

We have disabled CentOS 7 tests in CI. This patch reverts the
changes introduced in the following commit:

24bc083
ci: disable some tests on CentOS 7

Signed-off-by: Radostin Stoyanov <[email protected]>

This patch reverts changes introduced for Python 2 compatibility
in commits:

  1c866db (Add new files for running criu-coredump via python 2 or 3)

  3180d35 (Add support for python3 in criu-coredump).

Signed-off-by: Radostin Stoyanov <[email protected]>

This patch reverts changes introduced with the following commits:

4feb070
crit: enable python2 or python3 based crit

b78c4e0
test: fix crit test and extend it

Signed-off-by: Radostin Stoyanov <[email protected]>

When building with pip version 20.0.2 or older, the pip install
command creates a temporary directory and copies all files from
./crit. This results in the following error message:

    ModuleNotFoundError: No module named 'pycriu'

This error appears because the symlink 'pycriu' uses a relative path
that becomes invalid '../lib/py/'.

The '--no-build-isolation' option for pip install is needed to enable
the use of pre-installed dependencies (e.g., protobuf) during build.

The '--ignore-installed' option for pip is needed to avoid an error when
crit is already installed. For example, crit is installed in the GitHub
CI environment as part of the criu OBS package as a dependency for
podman.

Distributions such as Arch Linux have adopted an externally managed
python installation in compliance with PEP 668 [1] that prevents pip
from breaking the system by either installing packages to the system or
locally in the home folder. The '--break-system-packages' [2] option
allows pip to modify an externally managed Python installation.

[1] https://peps.python.org/pep-0668/
[2] https://pip.pypa.io/en/stable/cli/pip_uninstall/

Signed-off-by: Radostin Stoyanov <[email protected]>

This commit removes the dependency on the __future__ module, which was
used to enable Python 3 features in Python 2 code. With support for
Python 2 being dropped, it is no longer necessary to maintain backward
compatibility.

Signed-off-by: Radostin Stoyanov <[email protected]>

This commit removes the checks for the Python 2 binary in the makefile
and makes sure that ZDTM tests always use python3. Since support for
Python 2 has been dropped, these checks are no longer needed.

Signed-off-by: Radostin Stoyanov <[email protected]>

This patch is replacing the set_blocking() function with
os.set_blocking(). This function was introduced for compatibility with
Python 2 in commit 8094df8di (criu-ns: Add tests for criu-ns script).

Signed-off-by: Radostin Stoyanov <[email protected]>

This patch removes the code introduced for compatibility
with Python 2 in commits:

4c1ee3e
test/other: Resolve Py3 compatibility issues

6b615ca
test/others: Reuse setup_swrk()

Signed-off-by: Radostin Stoyanov <[email protected]>

This patch removes code introduced for compatibility with
Python 2 in commits:

  bf80fee (lib: correctly handle stdin/stdout (Python 3))

  b82f222 (lib: fix crit-recode fix for Python 2)

Signed-off-by: Radostin Stoyanov <[email protected]>

This patch removes the code for Python 2 compatibility introduced
with commit e65c7b5 (zdtm: Replace imp module with importlib).

Signed-off-by: Radostin Stoyanov <[email protected]>

This makes the error to mount cgroup hierarchy a bit less noisy:

Error (criu/cgroup.c:623): cg: Unable to mount cgroup2 : Invalid argument'

Instead of

Error (criu/cgroup.c:623): cg: Unable to mount cgroup2 : Invalid argument'
Error (criu/cgroup.c:715): cg: failed walking /proc/self/fd/-1/zdtmtst for empty cgroups: No such file or directory'

Signed-off-by: Michał Mirosław <[email protected]>

Log the mount and file that were the cause of failing a dump.

Signed-off-by: Michał Mirosław <[email protected]>

Signed-off-by: Michał Mirosław <[email protected]>

…socket.

Make debugging dump failures resulting in "sk unix: Can't dump half
of stream unix connection" errors easier.

Signed-off-by: Michał Mirosław <[email protected]>

Signed-off-by: Michał Mirosław <[email protected]>

Signed-off-by: Michał Mirosław <[email protected]>

Errors in early restore.log for status=1 from a subprocess are confusing,
esp. that they don't show what command failed. Since the result is
either ignored or logged anyway, mark the calls as "can fail".

Signed-off-by: Michał Mirosław <[email protected]>

Make logs about inaccessible mounts warnings, as the failures are
normally harmless (e.g. failure to read /dev/cgroup) and don't
make the CRIU run fail. (If it happens that the fsnotify can't
find a file, then to debug, full CRIU logs will be necessary anyway.)

Signed-off-by: Michał Mirosław <[email protected]>

These errors originate from the filesystem scanning in irmap.c and are mostly
benign. Nevertheless, if they do result in a failed irmap lookup, that failed
lookup is more interesting from an application perspective.

Signed-off-by: Michał Mirosław <[email protected]>

Fixes: checkpoint-restore#2222
Fixes: f1c8d38 ("kerndat: check if setsockopt IPV6_FREEBIND is supported")
Signed-off-by: Yan Evzman <[email protected]>
Signed-off-by: Andrei Vagin <[email protected]>

NR_fstat is a deprecated syscall, some
modern architectures such as riscv and
loongarch64 no longer support this syscall.
It is usually replaced by NR_statx.

NR_statx is supported since linux 4.10.

Signed-off-by: znley <[email protected]>

kerndat_has_ipv6_freebind creates a socket but doesn't close it.

Signed-off-by: Andrei Vagin <[email protected]>

Signed-off-by: Prajwal S N <[email protected]>

Signed-off-by: znley <[email protected]>

Signed-off-by: znley <[email protected]>

Signed-off-by: znley <[email protected]>

Signed-off-by: znley <[email protected]>

Signed-off-by: znley <[email protected]>

Signed-off-by: znley <[email protected]>

Add generic wrappers for fchown() and fchmod() that skip the calls if
no changes are needed. This will allow to unify places where we can
avoid errors when no-op requests are not permitted.

Signed-off-by: Michał Mirosław <[email protected]>

Note: This removes the difference in calling convention of
restore_file_perms() returning -errno that was the only call that did
this in the caller.

From: Radosław Burny <[email protected]>
Signed-off-by: Michał Mirosław <[email protected]>