Skip to content

arduino-libraries/Arduino_Alvik

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

98 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Arduino_Alvik

Arduino Alvik library, code your Alvik


To use this library, you need an Arduino® Alvik robot.

Once the Arduino® Nano ESP32 of the robot is attached to the computer, select Arduino Nano ESP32 from Arduino IDE 2 to program it.


Color Calibration

Flash color_calibration sketch into Arduino Nano ESP32 mounted on Alvik and follow the instructions on serial monitor.

The white and black values will be written into ESP32 EEPROM.


How to update firmware of Arduino Alvik Carrier

Since this issue, Arduino® Alvik Carrier is not integrated yet into STM32duino's boards.


At the moment, it is possible to:
  • Open the Bridge example in the Arduino IDE by going to File > Examples > Arduino_Alvik > bridge_firmware_updater. (For this, the board's firmware must be reset to work in the Arduino IDE.) Bridge Firmware Updater
  • Open STM32 Cube Programmer.
  • Set the connection to UART mode, the Port to whichever port the board is connected to, and DTR to HIGH. You can now press Connect. Make sure the robot is ON. Settings for STMCube
  • Go to the Erasing & Programming tab and set the File path to the firmware (this will be a .bin file) you are trying to program. The updated releases can be found here. You can find the latest release here. You can now press Start Programming. Programming STM Cube

Useful links