uprava kolecka #265

ThunderFly-aerospace · Nov 13, 2019 · b6c3893 · b6c3893
1 parent a6ff2c9
commit b6c3893
Showing 1 changed file with 32 additions and 6 deletions.
diff --git a/src/888_2022.scad b/src/888_2022.scad
@@ -1,7 +1,30 @@
 //========== VIDLICE TVARU H ==========//
 
 include <../parameters.scad>
+use <888_2011.scad>
+use <888_2012.scad>
+use <888_2021.scad>
+
+module wheel_tiere(){
+     rotate([90, 0, 0]){
+        rotate_extrude($fn=$preview?30:200)
+        hull(){
+            translate([wheel_inner_diameter/2, -wheel_inner_thickness/2+wheel_disc_upper_thickness, 0])
+                square([4, wheel_inner_thickness-wheel_disc_upper_thickness*2]);
+            translate([19+wheel_outer_diameter/2 - wheel_inner_thickness, 0, 0])
+            scale([0.7, 1.3]) circle(wheel_inner_thickness/2, $fn=100);
+        }
+    }
+}
 
+module wheel() {
+    wheel_tiere();
+    //rotate([90, 0, 0]) cylinder(h = 20, d = 110);
+    translate([0, wheel_inner_thickness/2+4.6, 0]) rotate([90, 0, 0]) 888_2011(true);
+    translate([0, -wheel_inner_thickness/2-4.6, 0]) rotate([-90, 0, 0]) 888_2011(false);
+    translate([0, wheel_inner_thickness/2+6.8, 0]) rotate([90, 0, 0]) 888_2012();
+    translate([0, -wheel_inner_thickness/2-6.8, 0]) rotate([-90, 0, 0]) 888_2012();
+}
 
 wheel_screw_diameter = M4_screw_diameter;
 wheel_nut_diameter = M4_nut_diameter;
@@ -18,12 +41,7 @@ connector_width = 25;
 wheel_screw_overhang = 8;
 
 front_fork_length = 120;
-piston_mount_offset = -15;
-
-module 888_2022(wheel=false) {
-    translate([0, 0, 0]) {
-    if(wheel) {
-        union() {
+        *union() {
             translate([-fork_wheel_width*1/3/2, -front_fork_length, 0])
                 rotate([0, -90, 0])
                     cylinder(d2=wheel_diameter-30, d1=wheel_diameter, h=fork_wheel_width*1/3, $fn=50);
@@ -34,6 +52,14 @@ module 888_2022(wheel=false) {
                 rotate([0, 90, 0])
                     cylinder(d=wheel_diameter, h=fork_wheel_width*1/3, center=true, $fn=50);
         }
+piston_mount_offset = -15;
+
+module 888_2022(set_wheel=false) {
+    translate([0, 0, 0]) {
+    if(set_wheel) {
+        translate([0, -front_fork_length, 0])
+            rotate([0, 0, 90])
+                wheel();
     }