Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

mlxbf_gige: bring in latest 6.x upstream commits #7

Open
wants to merge 104 commits into
base: 24.04_linux-nvidia
Choose a base branch
from

Conversation

dthompso
Copy link
Contributor

@dthompso dthompso commented Jun 5, 2024

SRU Justification:

[Impact]

There are currently four upstream commits for Nvidia's mlxbf_gige driver
that are present in upstream, but not in the NV-Kernels 24.04 repo. These four
commits provide three fixes and one feature (display of pause frame counters).

[Fix]

Cherry pick the following four commits from upstream linux:
Linux 6.9.0 -> 09ba28e David Thompson mlxbf_gige: stop interface during shutdown
Linux 6.8.0 -> f7442a6 David Thompson mlxbf_gige: call request_irq() after NAPI initialized
Linux 6.8.0 -> d6c30c5 David Thompson mlxbf_gige: stop PHY during open() error paths
Linux 6.8.0 -> c223416 David Thompson mlxbf_gige: add support to display pause frame counters

[Test Cases]

  • Exercise reboot testing in a loop, verifying oob_net0 interface comes up
  • Enable kdump and verify that any triggered kernel dump does not crash mlxbf_gige driver
  • Exercise the new feature by running "ethtool -I -a oob_net0" before and
    after heavy traffic is sent into the oob_net0 interface.

ianmay81 and others added 30 commits May 30, 2024 11:34
…dversion"

This reverts commit 47d27f2.

We need to revert this to avoid regressing any modules used in Jammy.

Signed-off-by: Ian May <[email protected]>
Ignore: yes
Signed-off-by: Ian May <[email protected]>
Ignore: yes
Signed-off-by: Ian May <[email protected]>
Ignore: yes
Signed-off-by: Paolo Pisati <[email protected]>
Ignore: yes
Signed-off-by: Andrea Righi <[email protected]>
Ignore: yes
Signed-off-by: Andrea Righi <[email protected]>
Ignore: yes
Signed-off-by: Andrea Righi <[email protected]>
Ignore: yes
Signed-off-by: Andrea Righi <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2055128
Properties: no-test-build
Signed-off-by: Andrea Righi <[email protected]>
Ignore: yes
Signed-off-by: Andrea Righi <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Aug 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2073603

[ Upstream commit 769e6a1 ]

ui_browser__show() is capturing the input title that is stack allocated
memory in hist_browser__run().

Avoid a use after return by strdup-ing the string.

Committer notes:

Further explanation from Ian Rogers:

My command line using tui is:
$ sudo bash -c 'rm /tmp/asan.log*; export
ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a
sleep 1; /tmp/perf/perf mem report'
I then go to the perf annotate view and quit. This triggers the asan
error (from the log file):
```
==1254591==ERROR: AddressSanitizer: stack-use-after-return on address
0x7f2813331920 at pc 0x7f28180
65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10
READ of size 80 at 0x7f2813331920 thread T0
    #0 0x7f2818065990 in __interceptor_strlen
../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461
    #1 0x7f2817698251 in SLsmg_write_wrapped_string
(/lib/x86_64-linux-gnu/libslang.so.2+0x98251)
    #2 0x7f28176984b9 in SLsmg_write_nstring
(/lib/x86_64-linux-gnu/libslang.so.2+0x984b9)
    #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60
    #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266
    #5 0x55c94045c776 in ui_browser__show ui/browser.c:288
    #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206
    #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458
    #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412
    #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527
    #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613
    #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661
    #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671
    #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141
    #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805
    #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374
    #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516
    #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350
    #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403
    #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447
    #20 0x55c9400e53ad in main tools/perf/perf.c:561
    #21 0x7f28170456c9 in __libc_start_call_main
../sysdeps/nptl/libc_start_call_main.h:58
    #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360
    #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId:
84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93)

Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame
    #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746

  This frame has 1 object(s):
    [32, 192) 'title' (line 747) <== Memory access at offset 32 is
inside this variable
HINT: this may be a false positive if your program uses some custom
stack unwind mechanism, swapcontext or vfork
```
hist_browser__run isn't on the stack so the asan error looks legit.
There's no clean init/exit on struct ui_browser so I may be trading a
use-after-return for a memory leak, but that seems look a good trade
anyway.

Fixes: 05e8b08 ("perf ui browser: Stop using 'self'")
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Portia Stephens <[email protected]>
Signed-off-by: Roxana Nicolescu <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Aug 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2073788

commit 9d274c1 upstream.

We have been seeing crashes on duplicate keys in
btrfs_set_item_key_safe():

  BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192)
  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/ctree.c:2620!
  invalid opcode: 0000 [#1] PREEMPT SMP PTI
  CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
  RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs]

With the following stack trace:

  #0  btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4)
  #1  btrfs_drop_extents (fs/btrfs/file.c:411:4)
  #2  log_one_extent (fs/btrfs/tree-log.c:4732:9)
  #3  btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9)
  #4  btrfs_log_inode (fs/btrfs/tree-log.c:6626:9)
  #5  btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8)
  #6  btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8)
  #7  btrfs_sync_file (fs/btrfs/file.c:1933:8)
  #8  vfs_fsync_range (fs/sync.c:188:9)
  #9  vfs_fsync (fs/sync.c:202:9)
  #10 do_fsync (fs/sync.c:212:9)
  #11 __do_sys_fdatasync (fs/sync.c:225:9)
  #12 __se_sys_fdatasync (fs/sync.c:223:1)
  #13 __x64_sys_fdatasync (fs/sync.c:223:1)
  #14 do_syscall_x64 (arch/x86/entry/common.c:52:14)
  #15 do_syscall_64 (arch/x86/entry/common.c:83:7)
  #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121)

So we're logging a changed extent from fsync, which is splitting an
extent in the log tree. But this split part already exists in the tree,
triggering the BUG().

This is the state of the log tree at the time of the crash, dumped with
drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py)
to get more details than btrfs_print_leaf() gives us:

  >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"])
  leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610
  leaf 33439744 flags 0x100000000000000
  fs uuid e5bd3946-400c-4223-8923-190ef1f18677
  chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da
          item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160
                  generation 7 transid 9 size 8192 nbytes 8473563889606862198
                  block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0
                  sequence 204 flags 0x10(PREALLOC)
                  atime 1716417703.220000000 (2024-05-22 15:41:43)
                  ctime 1716417704.983333333 (2024-05-22 15:41:44)
                  mtime 1716417704.983333333 (2024-05-22 15:41:44)
                  otime 17592186044416.000000000 (559444-03-08 01:40:16)
          item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13
                  index 195 namelen 3 name: 193
          item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37
                  location key (0 UNKNOWN.0 0) type XATTR
                  transid 7 data_len 1 name_len 6
                  name: user.a
                  data a
          item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53
                  generation 9 type 1 (regular)
                  extent data disk byte 303144960 nr 12288
                  extent data offset 0 nr 4096 ram 12288
                  extent compression 0 (none)
          item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53
                  generation 9 type 2 (prealloc)
                  prealloc data disk byte 303144960 nr 12288
                  prealloc data offset 4096 nr 8192
          item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53
                  generation 9 type 2 (prealloc)
                  prealloc data disk byte 303144960 nr 12288
                  prealloc data offset 8192 nr 4096
  ...

So the real problem happened earlier: notice that items 4 (4k-12k) and 5
(8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and
item 5 starts at i_size.

Here is the state of the filesystem tree at the time of the crash:

  >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root
  >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0))
  >>> print_extent_buffer(nodes[0])
  leaf 30425088 level 0 items 184 generation 9 owner 5
  leaf 30425088 flags 0x100000000000000
  fs uuid e5bd3946-400c-4223-8923-190ef1f18677
  chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da
  	...
          item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160
                  generation 7 transid 7 size 4096 nbytes 12288
                  block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0
                  sequence 6 flags 0x10(PREALLOC)
                  atime 1716417703.220000000 (2024-05-22 15:41:43)
                  ctime 1716417703.220000000 (2024-05-22 15:41:43)
                  mtime 1716417703.220000000 (2024-05-22 15:41:43)
                  otime 1716417703.220000000 (2024-05-22 15:41:43)
          item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13
                  index 195 namelen 3 name: 193
          item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37
                  location key (0 UNKNOWN.0 0) type XATTR
                  transid 7 data_len 1 name_len 6
                  name: user.a
                  data a
          item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53
                  generation 9 type 1 (regular)
                  extent data disk byte 303144960 nr 12288
                  extent data offset 0 nr 8192 ram 12288
                  extent compression 0 (none)
          item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53
                  generation 9 type 2 (prealloc)
                  prealloc data disk byte 303144960 nr 12288
                  prealloc data offset 8192 nr 4096

Item 5 in the log tree corresponds to item 183 in the filesystem tree,
but nothing matches item 4. Furthermore, item 183 is the last item in
the leaf.

btrfs_log_prealloc_extents() is responsible for logging prealloc extents
beyond i_size. It first truncates any previously logged prealloc extents
that start beyond i_size. Then, it walks the filesystem tree and copies
the prealloc extent items to the log tree.

If it hits the end of a leaf, then it calls btrfs_next_leaf(), which
unlocks the tree and does another search. However, while the filesystem
tree is unlocked, an ordered extent completion may modify the tree. In
particular, it may insert an extent item that overlaps with an extent
item that was already copied to the log tree.

This may manifest in several ways depending on the exact scenario,
including an EEXIST error that is silently translated to a full sync,
overlapping items in the log tree, or this crash. This particular crash
is triggered by the following sequence of events:

- Initially, the file has i_size=4k, a regular extent from 0-4k, and a
  prealloc extent beyond i_size from 4k-12k. The prealloc extent item is
  the last item in its B-tree leaf.
- The file is fsync'd, which copies its inode item and both extent items
  to the log tree.
- An xattr is set on the file, which sets the
  BTRFS_INODE_COPY_EVERYTHING flag.
- The range 4k-8k in the file is written using direct I/O. i_size is
  extended to 8k, but the ordered extent is still in flight.
- The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this
  calls copy_inode_items_to_log(), which calls
  btrfs_log_prealloc_extents().
- btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the
  filesystem tree. Since it starts before i_size, it skips it. Since it
  is the last item in its B-tree leaf, it calls btrfs_next_leaf().
- btrfs_next_leaf() unlocks the path.
- The ordered extent completion runs, which converts the 4k-8k part of
  the prealloc extent to written and inserts the remaining prealloc part
  from 8k-12k.
- btrfs_next_leaf() does a search and finds the new prealloc extent
  8k-12k.
- btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into
  the log tree. Note that it overlaps with the 4k-12k prealloc extent
  that was copied to the log tree by the first fsync.
- fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k
  extent that was written.
- This tries to drop the range 4k-8k in the log tree, which requires
  adjusting the start of the 4k-12k prealloc extent in the log tree to
  8k.
- btrfs_set_item_key_safe() sees that there is already an extent
  starting at 8k in the log tree and calls BUG().

Fix this by detecting when we're about to insert an overlapping file
extent item in the log tree and truncating the part that would overlap.

CC: [email protected] # 6.1+
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Portia Stephens <[email protected]>
Signed-off-by: Roxana Nicolescu <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Aug 17, 2024
…PLES event"

BugLink: https://bugs.launchpad.net/bugs/2073788

commit 5b3cde1 upstream.

This reverts commit 7d1405c.

This causes segfaults in some cases, as reported by Milian:

  ```
  sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e
  raw_syscalls:sys_enter ls
  ...
  [ perf record: Woken up 3 times to write data ]
  malloc(): invalid next size (unsorted)
  Aborted
  ```

  Backtrace with GDB + debuginfod:

  ```
  malloc(): invalid next size (unsorted)

  Thread 1 "perf" received signal SIGABRT, Aborted.
  __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6,
  no_tid=no_tid@entry=0) at pthread_kill.c:44
  Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c
  44            return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO
  (ret) : 0;
  (gdb) bt
  #0  __pthread_kill_implementation (threadid=<optimized out>,
  signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44
  #1  0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>,
  signo=6) at pthread_kill.c:78
  #2  0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/
  raise.c:26
  #3  0x00007ffff6e384c3 in __GI_abort () at abort.c:79
  #4  0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea
  "%s\n") at ../sysdeps/posix/libc_fatal.c:132
  #5  0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850
  "malloc(): invalid next size (unsorted)") at malloc.c:5772
  #6  0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0
  <main_arena>, bytes=bytes@entry=368) at malloc.c:4081
  #7  0x00007ffff6eb877e in __libc_calloc (n=<optimized out>,
  elem_size=<optimized out>) at malloc.c:3754
  #8  0x000055555569bdb6 in perf_session.do_write_header ()
  #9  0x00005555555a373a in __cmd_record.constprop.0 ()
  #10 0x00005555555a6846 in cmd_record ()
  #11 0x000055555564db7f in run_builtin ()
  #12 0x000055555558ed77 in main ()
  ```

  Valgrind memcheck:
  ```
  ==45136== Invalid write of size 8
  ==45136==    at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf)
  ==45136==    by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==  Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd
  ==45136==    at 0x4849BF3: calloc (vg_replace_malloc.c:1675)
  ==45136==    by 0x3574AB: zalloc (in /usr/bin/perf)
  ==45136==    by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==
  ==45136== Syscall param write(buf) points to unaddressable byte(s)
  ==45136==    at 0x575953D: __libc_write (write.c:26)
  ==45136==    by 0x575953D: write (write.c:24)
  ==45136==    by 0x35761F: ion (in /usr/bin/perf)
  ==45136==    by 0x357778: writen (in /usr/bin/perf)
  ==45136==    by 0x1548F7: record__write (in /usr/bin/perf)
  ==45136==    by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==  Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd
  ==45136==    at 0x4849BF3: calloc (vg_replace_malloc.c:1675)
  ==45136==    by 0x3574AB: zalloc (in /usr/bin/perf)
  ==45136==    by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==
 -----

Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/
Reported-by: Milian Wolff <[email protected]>
Tested-by: Milian Wolff <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected] # 6.8+
Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Portia Stephens <[email protected]>
Signed-off-by: Roxana Nicolescu <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Aug 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2075154

[ Upstream commit f1e197a ]

trace_drop_common() is called with preemption disabled, and it acquires
a spin_lock. This is problematic for RT kernels because spin_locks are
sleeping locks in this configuration, which causes the following splat:

BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 2
5 locks held by rcuc/47/449:
 #0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210
 #1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130
 #2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210
 #3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70
 #4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290
irq event stamp: 139909
hardirqs last  enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80
hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290
softirqs last  enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170
softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0
Preemption disabled at:
[<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0
CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ #7
Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022
Call Trace:
 <TASK>
 dump_stack_lvl+0x8c/0xd0
 dump_stack+0x14/0x20
 __might_resched+0x21e/0x2f0
 rt_spin_lock+0x5e/0x130
 ? trace_drop_common.constprop.0+0xb5/0x290
 ? skb_queue_purge_reason.part.0+0x1bf/0x230
 trace_drop_common.constprop.0+0xb5/0x290
 ? preempt_count_sub+0x1c/0xd0
 ? _raw_spin_unlock_irqrestore+0x4a/0x80
 ? __pfx_trace_drop_common.constprop.0+0x10/0x10
 ? rt_mutex_slowunlock+0x26a/0x2e0
 ? skb_queue_purge_reason.part.0+0x1bf/0x230
 ? __pfx_rt_mutex_slowunlock+0x10/0x10
 ? skb_queue_purge_reason.part.0+0x1bf/0x230
 trace_kfree_skb_hit+0x15/0x20
 trace_kfree_skb+0xe9/0x150
 kfree_skb_reason+0x7b/0x110
 skb_queue_purge_reason.part.0+0x1bf/0x230
 ? __pfx_skb_queue_purge_reason.part.0+0x10/0x10
 ? mark_lock.part.0+0x8a/0x520
...

trace_drop_common() also disables interrupts, but this is a minor issue
because we could easily replace it with a local_lock.

Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic
context.

Signed-off-by: Wander Lairson Costa <[email protected]>
Reported-by: Hu Chunyu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Manuel Diewald <[email protected]>
Signed-off-by: Stefan Bader <[email protected]>
Signed-off-by: Roxana Nicolescu <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Sep 6, 2024
Ethtool callbacks can be executed while reset is in progress and try to
access deleted resources, e.g. getting coalesce settings can result in a
NULL pointer dereference seen below.

Reproduction steps:
Once the driver is fully initialized, trigger reset:
	# echo 1 > /sys/class/net/<interface>/device/reset
when reset is in progress try to get coalesce settings using ethtool:
	# ethtool -c <interface>

BUG: kernel NULL pointer dereference, address: 0000000000000020
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 11 PID: 19713 Comm: ethtool Tainted: G S                 6.10.0-rc7+ #7
RIP: 0010:ice_get_q_coalesce+0x2e/0xa0 [ice]
RSP: 0018:ffffbab1e9bcf6a8 EFLAGS: 00010206
RAX: 000000000000000c RBX: ffff94512305b028 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9451c3f2e588 RDI: ffff9451c3f2e588
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff9451c3f2e580 R11: 000000000000001f R12: ffff945121fa9000
R13: ffffbab1e9bcf760 R14: 0000000000000013 R15: ffffffff9e65dd40
FS:  00007faee5fbe740(0000) GS:ffff94546fd80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000020 CR3: 0000000106c2e005 CR4: 00000000001706f0
Call Trace:
<TASK>
ice_get_coalesce+0x17/0x30 [ice]
coalesce_prepare_data+0x61/0x80
ethnl_default_doit+0xde/0x340
genl_family_rcv_msg_doit+0xf2/0x150
genl_rcv_msg+0x1b3/0x2c0
netlink_rcv_skb+0x5b/0x110
genl_rcv+0x28/0x40
netlink_unicast+0x19c/0x290
netlink_sendmsg+0x222/0x490
__sys_sendto+0x1df/0x1f0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x82/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7faee60d8e27

Calling netif_device_detach() before reset makes the net core not call
the driver when ethtool command is issued, the attempt to execute an
ethtool command during reset will result in the following message:

    netlink error: No such device

instead of NULL pointer dereference. Once reset is done and
ice_rebuild() is executing, the netif_device_attach() is called to allow
for ethtool operations to occur again in a safe manner.

Fixes: fcea6f3 ("ice: Add stats and ethtool support")
Suggested-by: Jakub Kicinski <[email protected]>
Reviewed-by: Igor Bagnucki <[email protected]>
Signed-off-by: Dawid Osuchowski <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Reviewed-by: Michal Schmidt <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Sep 23, 2024
iter_finish_branch_entry() doesn't put the branch_info from/to map
elements creating memory leaks. This can be seen with:

```
$ perf record -e cycles -b perf test -w noploop
$ perf report -D
...
Direct leak of 984344 byte(s) in 123043 object(s) allocated from:
    #0 0x7fb2654f3bd7 in malloc libsanitizer/asan/asan_malloc_linux.cpp:69
    #1 0x564d3400d10b in map__get util/map.h:186
    #2 0x564d3400d10b in ip__resolve_ams util/machine.c:1981
    #3 0x564d34014d81 in sample__resolve_bstack util/machine.c:2151
    #4 0x564d34094790 in iter_prepare_branch_entry util/hist.c:898
    #5 0x564d34098fa4 in hist_entry_iter__add util/hist.c:1238
    #6 0x564d33d1f0c7 in process_sample_event tools/perf/builtin-report.c:334
    #7 0x564d34031eb7 in perf_session__deliver_event util/session.c:1655
    #8 0x564d3403ba52 in do_flush util/ordered-events.c:245
    #9 0x564d3403ba52 in __ordered_events__flush util/ordered-events.c:324
    #10 0x564d3402d32e in perf_session__process_user_event util/session.c:1708
    #11 0x564d34032480 in perf_session__process_event util/session.c:1877
    #12 0x564d340336ad in reader__read_event util/session.c:2399
    #13 0x564d34033fdc in reader__process_events util/session.c:2448
    #14 0x564d34033fdc in __perf_session__process_events util/session.c:2495
    #15 0x564d34033fdc in perf_session__process_events util/session.c:2661
    #16 0x564d33d27113 in __cmd_report tools/perf/builtin-report.c:1065
    #17 0x564d33d27113 in cmd_report tools/perf/builtin-report.c:1805
    #18 0x564d33e0ccb7 in run_builtin tools/perf/perf.c:350
    #19 0x564d33e0d45e in handle_internal_command tools/perf/perf.c:403
    #20 0x564d33cdd827 in run_argv tools/perf/perf.c:447
    #21 0x564d33cdd827 in main tools/perf/perf.c:561
...
```

Clearing up the map_symbols properly creates maps reference count
issues so resolve those. Resolving this issue doesn't improve peak
heap consumption for the test above.

Committer testing:

  $ sudo dnf install libasan
  $ make -k CORESIGHT=1 EXTRA_CFLAGS="-fsanitize=address" CC=clang O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin

Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Yanteng Si <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Sep 23, 2024
AddressSanitizer found a use-after-free bug in the symbol code which
manifested as 'perf top' segfaulting.

  ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80
  READ of size 1 at 0x60b00c48844b thread T193
      #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310
      #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286
      #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614
      #3 0x5650d804568f in __hists__add_entry util/hist.c:754
      #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772
      #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997
      #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242
      #7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845
      #8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208
      #9 0x5650d7fdb51b in do_flush util/ordered-events.c:245
      #10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324
      #11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120
      #12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442
      #13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81

When updating hist maps it's also necessary to update the hist symbol
reference because the old one gets freed in map__put().

While this bug was probably introduced with 5c24b67 ("perf
tools: Replace map->referenced & maps->removed_maps with map->refcnt"),
the symbol objects were leaked until c087e94 ("perf machine:
Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so
the bug was masked.

Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL")
Reported-by: Yunzhao Li <[email protected]>
Signed-off-by: Matt Fleming (Cloudflare) <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: [email protected]
Cc: Namhyung Kim <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: [email protected] # v5.13+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Sep 23, 2024
The fields in the hist_entry are filled on-demand which means they only
have meaningful values when relevant sort keys are used.

So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in
the hist entry can be garbage.  So it shouldn't access it
unconditionally.

I got a segfault, when I wanted to see cgroup profiles.

  $ sudo perf record -a --all-cgroups --synth=cgroup true

  $ sudo perf report -s cgroup

  Program received signal SIGSEGV, Segmentation fault.
  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  48		return RC_CHK_ACCESS(map)->dso;
  (gdb) bt
  #0  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  #1  0x00005555557aa39b in map__load (map=0x0) at util/map.c:344
  #2  0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385
  #3  0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true)
      at util/hist.c:644
  #4  0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761
  #5  0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779
  #6  0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015
  #7  0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0)
      at util/hist.c:1260
  #8  0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0,
      machine=0x5555560388e8) at builtin-report.c:334
  #9  0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232
  #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271
  #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0,
      file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354
  #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132
  #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245
  #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324
  #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342
  #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60)
      at util/session.c:780
  #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688,
      file_path=0x555556038ff0 "perf.data") at util/session.c:1406

As you can see the entry->ms.map was NULL even if he->ms.map has a
value.  This is because 'sym' sort key is not given, so it cannot assume
whether he->ms.sym and entry->ms.sym is the same.  I only checked the
'sym' sort key here as it implies 'dso' behavior (so maps are the same).

Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps")
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Sep 29, 2024
Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock
on x86 due to a chain of locks and SRCU synchronizations.  Translating the
below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on
CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the
fairness of r/w semaphores).

    CPU0                     CPU1                     CPU2
1   lock(&kvm->slots_lock);
2                                                     lock(&vcpu->mutex);
3                                                     lock(&kvm->srcu);
4                            lock(cpu_hotplug_lock);
5                            lock(kvm_lock);
6                            lock(&kvm->slots_lock);
7                                                     lock(cpu_hotplug_lock);
8   sync(&kvm->srcu);

Note, there are likely more potential deadlocks in KVM x86, e.g. the same
pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with
__kvmclock_cpufreq_notifier():

  cpuhp_cpufreq_online()
  |
  -> cpufreq_online()
     |
     -> cpufreq_gov_performance_limits()
        |
        -> __cpufreq_driver_target()
           |
           -> __target_index()
              |
              -> cpufreq_freq_transition_begin()
                 |
                 -> cpufreq_notify_transition()
                    |
                    -> ... __kvmclock_cpufreq_notifier()

But, actually triggering such deadlocks is beyond rare due to the
combination of dependencies and timings involved.  E.g. the cpufreq
notifier is only used on older CPUs without a constant TSC, mucking with
the NX hugepage mitigation while VMs are running is very uncommon, and
doing so while also onlining/offlining a CPU (necessary to generate
contention on cpu_hotplug_lock) would be even more unusual.

The most robust solution to the general cpu_hotplug_lock issue is likely
to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq
notifier doesn't to take kvm_lock.  For now, settle for fixing the most
blatant deadlock, as switching to an RCU-protected list is a much more
involved change, but add a comment in locking.rst to call out that care
needs to be taken when walking holding kvm_lock and walking vm_list.

  ======================================================
  WARNING: possible circular locking dependency detected
  6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S         O
  ------------------------------------------------------
  tee/35048 is trying to acquire lock:
  ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm]

  but task is already holding lock:
  ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm]

  which lock already depends on the new lock.

   the existing dependency chain (in reverse order) is:

  -> #3 (kvm_lock){+.+.}-{3:3}:
         __mutex_lock+0x6a/0xb40
         mutex_lock_nested+0x1f/0x30
         kvm_dev_ioctl+0x4fb/0xe50 [kvm]
         __se_sys_ioctl+0x7b/0xd0
         __x64_sys_ioctl+0x21/0x30
         x64_sys_call+0x15d0/0x2e60
         do_syscall_64+0x83/0x160
         entry_SYSCALL_64_after_hwframe+0x76/0x7e

  -> #2 (cpu_hotplug_lock){++++}-{0:0}:
         cpus_read_lock+0x2e/0xb0
         static_key_slow_inc+0x16/0x30
         kvm_lapic_set_base+0x6a/0x1c0 [kvm]
         kvm_set_apic_base+0x8f/0xe0 [kvm]
         kvm_set_msr_common+0x9ae/0xf80 [kvm]
         vmx_set_msr+0xa54/0xbe0 [kvm_intel]
         __kvm_set_msr+0xb6/0x1a0 [kvm]
         kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm]
         kvm_vcpu_ioctl+0x485/0x5b0 [kvm]
         __se_sys_ioctl+0x7b/0xd0
         __x64_sys_ioctl+0x21/0x30
         x64_sys_call+0x15d0/0x2e60
         do_syscall_64+0x83/0x160
         entry_SYSCALL_64_after_hwframe+0x76/0x7e

  -> #1 (&kvm->srcu){.+.+}-{0:0}:
         __synchronize_srcu+0x44/0x1a0
         synchronize_srcu_expedited+0x21/0x30
         kvm_swap_active_memslots+0x110/0x1c0 [kvm]
         kvm_set_memslot+0x360/0x620 [kvm]
         __kvm_set_memory_region+0x27b/0x300 [kvm]
         kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm]
         kvm_vm_ioctl+0x295/0x650 [kvm]
         __se_sys_ioctl+0x7b/0xd0
         __x64_sys_ioctl+0x21/0x30
         x64_sys_call+0x15d0/0x2e60
         do_syscall_64+0x83/0x160
         entry_SYSCALL_64_after_hwframe+0x76/0x7e

  -> #0 (&kvm->slots_lock){+.+.}-{3:3}:
         __lock_acquire+0x15ef/0x2e30
         lock_acquire+0xe0/0x260
         __mutex_lock+0x6a/0xb40
         mutex_lock_nested+0x1f/0x30
         set_nx_huge_pages+0x179/0x1e0 [kvm]
         param_attr_store+0x93/0x100
         module_attr_store+0x22/0x40
         sysfs_kf_write+0x81/0xb0
         kernfs_fop_write_iter+0x133/0x1d0
         vfs_write+0x28d/0x380
         ksys_write+0x70/0xe0
         __x64_sys_write+0x1f/0x30
         x64_sys_call+0x281b/0x2e60
         do_syscall_64+0x83/0x160
         entry_SYSCALL_64_after_hwframe+0x76/0x7e

Cc: Chao Gao <[email protected]>
Fixes: 0bf5049 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock")
Cc: [email protected]
Reviewed-by: Kai Huang <[email protected]>
Acked-by: Kai Huang <[email protected]>
Tested-by: Farrah Chen <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
@nvidia-bfigg nvidia-bfigg force-pushed the 24.04_linux-nvidia branch 2 times, most recently from 5325aaa to d1895f3 Compare October 7, 2024 15:00
nvidia-bfigg pushed a commit that referenced this pull request Oct 7, 2024
BugLink: https://bugs.launchpad.net/bugs/2076435

commit be346c1 upstream.

The code in ocfs2_dio_end_io_write() estimates number of necessary
transaction credits using ocfs2_calc_extend_credits().  This however does
not take into account that the IO could be arbitrarily large and can
contain arbitrary number of extents.

Extent tree manipulations do often extend the current transaction but not
in all of the cases.  For example if we have only single block extents in
the tree, ocfs2_mark_extent_written() will end up calling
ocfs2_replace_extent_rec() all the time and we will never extend the
current transaction and eventually exhaust all the transaction credits if
the IO contains many single block extents.  Once that happens a
WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in
jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to
this error.  This was actually triggered by one of our customers on a
heavily fragmented OCFS2 filesystem.

To fix the issue make sure the transaction always has enough credits for
one extent insert before each call of ocfs2_mark_extent_written().

Heming Zhao said:

------
PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error"

PID: xxx  TASK: xxxx  CPU: 5  COMMAND: "SubmitThread-CA"
  #0 machine_kexec at ffffffff8c069932
  #1 __crash_kexec at ffffffff8c1338fa
  #2 panic at ffffffff8c1d69b9
  #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2]
  #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2]
  #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2]
  #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2]
  #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2]
  #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2]
  #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2]
#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2]
#11 dio_complete at ffffffff8c2b9fa7
#12 do_blockdev_direct_IO at ffffffff8c2bc09f
#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2]
#14 generic_file_direct_write at ffffffff8c1dcf14
#15 __generic_file_write_iter at ffffffff8c1dd07b
#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2]
#17 aio_write at ffffffff8c2cc72e
#18 kmem_cache_alloc at ffffffff8c248dde
#19 do_io_submit at ffffffff8c2ccada
#20 do_syscall_64 at ffffffff8c004984
#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba

Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io")
Signed-off-by: Jan Kara <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Reviewed-by: Heming Zhao <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Changwei Ge <[email protected]>
Cc: Gang He <[email protected]>
Cc: Jun Piao <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Portia Stephens <[email protected]>
Signed-off-by: Roxana Nicolescu <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Oct 12, 2024
On the node of an NFS client, some files saved in the mountpoint of the
NFS server were copied to another location of the same NFS server.
Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference
crash with the following syslog:

[232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116
[232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116
[232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
[232066.588586] Mem abort info:
[232066.588701]   ESR = 0x0000000096000007
[232066.588862]   EC = 0x25: DABT (current EL), IL = 32 bits
[232066.589084]   SET = 0, FnV = 0
[232066.589216]   EA = 0, S1PTW = 0
[232066.589340]   FSC = 0x07: level 3 translation fault
[232066.589559] Data abort info:
[232066.589683]   ISV = 0, ISS = 0x00000007
[232066.589842]   CM = 0, WnR = 0
[232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400
[232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000
[232066.590757] Internal error: Oops: 96000007 [#1] SMP
[232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2
[232066.591052]  vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs
[232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1
[232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06
[232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4]
[232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4]
[232066.598595] sp : ffff8000f568fc70
[232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000
[232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001
[232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050
[232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000
[232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000
[232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6
[232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828
[232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a
[232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058
[232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000
[232066.601636] Call trace:
[232066.601749]  nfs4_reclaim_open_state+0x220/0x800 [nfsv4]
[232066.601998]  nfs4_do_reclaim+0x1b8/0x28c [nfsv4]
[232066.602218]  nfs4_state_manager+0x928/0x10f0 [nfsv4]
[232066.602455]  nfs4_run_state_manager+0x78/0x1b0 [nfsv4]
[232066.602690]  kthread+0x110/0x114
[232066.602830]  ret_from_fork+0x10/0x20
[232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00)
[232066.603284] SMP: stopping secondary CPUs
[232066.606936] Starting crashdump kernel...
[232066.607146] Bye!

Analysing the vmcore, we know that nfs4_copy_state listed by destination
nfs_server->ss_copies was added by the field copies in handle_async_copy(),
and we found a waiting copy process with the stack as:
PID: 3511963  TASK: ffff710028b47e00  CPU: 0   COMMAND: "cp"
 #0 [ffff8001116ef740] __switch_to at ffff8000081b92f4
 #1 [ffff8001116ef760] __schedule at ffff800008dd0650
 #2 [ffff8001116ef7c0] schedule at ffff800008dd0a00
 #3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0
 #4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c
 #5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898
 #6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4]
 #7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4]
 #8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4]
 #9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4]

The NULL-pointer dereference was due to nfs42_complete_copies() listed
the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state.
So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and
the data accessed through this pointer was also incorrect. Generally,
the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or
open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state().
When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED
and copies are not deleted in nfs_server->ss_copies, the source state
may be passed to the nfs42_complete_copies() process earlier, resulting
in this crash scene finally. To solve this issue, we add a list_head
nfs_server->ss_src_copies for a server-to-server copy specially.

Fixes: 0e65a32 ("NFS: handle source server reboot")
Signed-off-by: Yanjun Zhang <[email protected]>
Reviewed-by: Trond Myklebust <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Oct 18, 2024
…ation

When testing the XDP_REDIRECT function on the LS1028A platform, we
found a very reproducible issue that the Tx frames can no longer be
sent out even if XDP_REDIRECT is turned off. Specifically, if there
is a lot of traffic on Rx direction, when XDP_REDIRECT is turned on,
the console may display some warnings like "timeout for tx ring #6
clear", and all redirected frames will be dropped, the detailed log
is as follows.

root@ls1028ardb:~# ./xdp-bench redirect eno0 eno2
Redirecting from eno0 (ifindex 3; driver fsl_enetc) to eno2 (ifindex 4; driver fsl_enetc)
[203.849809] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #5 clear
[204.006051] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear
[204.161944] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear
eno0->eno2     1420505 rx/s       1420590 err,drop/s      0 xmit/s
  xmit eno0->eno2    0 xmit/s     1420590 drop/s     0 drv_err/s     15.71 bulk-avg
eno0->eno2     1420484 rx/s       1420485 err,drop/s      0 xmit/s
  xmit eno0->eno2    0 xmit/s     1420485 drop/s     0 drv_err/s     15.71 bulk-avg

By analyzing the XDP_REDIRECT implementation of enetc driver, the
driver will reconfigure Tx and Rx BD rings when a bpf program is
installed or uninstalled, but there is no mechanisms to block the
redirected frames when enetc driver reconfigures rings. Similarly,
XDP_TX verdicts on received frames can also lead to frames being
enqueued in the Tx rings. Because XDP ignores the state set by the
netif_tx_wake_queue() API, so introduce the ENETC_TX_DOWN flag to
suppress transmission of XDP frames.

Fixes: c33bfaf ("net: enetc: set up XDP program under enetc_reconfigure()")
Cc: [email protected]
Signed-off-by: Wei Fang <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Oct 18, 2024
The Tx BD rings are disabled first in enetc_stop() and the driver
waits for them to become empty. This operation is not safe while
the ring is actively transmitting frames, and will cause the ring
to not be empty and hardware exception. As described in the NETC
block guide, software should only disable an active Tx ring after
all pending ring entries have been consumed (i.e. when PI = CI).
Disabling a transmit ring that is actively processing BDs risks
a HW-SW race hazard whereby a hardware resource becomes assigned
to work on one or more ring entries only to have those entries be
removed due to the ring becoming disabled.

When testing XDP_REDIRECT feautre, although all frames were blocked
from being put into Tx rings during ring reconfiguration, the similar
warning log was still encountered:

fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear
fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear

The reason is that when there are still unsent frames in the Tx ring,
disabling the Tx ring causes the remaining frames to be unable to be
sent out. And the Tx ring cannot be restored, which means that even
if the xdp program is uninstalled, the Tx frames cannot be sent out
anymore. Therefore, correct the operation order in enect_start() and
enect_stop().

Fixes: ff58fda ("net: enetc: prioritize ability to go down over packet processing")
Cc: [email protected]
Signed-off-by: Wei Fang <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Nov 26, 2024
Patch series "Improve the copy of task comm", v8.

Using {memcpy,strncpy,strcpy,kstrdup} to copy the task comm relies on the
length of task comm.  Changes in the task comm could result in a
destination string that is overflow.  Therefore, we should explicitly
ensure the destination string is always NUL-terminated, regardless of the
task comm.  This approach will facilitate future extensions to the task
comm.

As suggested by Linus [0], we can identify all relevant code with the
following git grep command:

  git grep 'memcpy.*->comm\>'
  git grep 'kstrdup.*->comm\>'
  git grep 'strncpy.*->comm\>'
  git grep 'strcpy.*->comm\>'

PATCH #2~#4:   memcpy
PATCH #5~#6:   kstrdup
PATCH #7:      strcpy

Please note that strncpy() is not included in this series as it is being
tracked by another effort. [1]


This patch (of 7):

We want to eliminate the use of __get_task_comm() for the following
reasons:

- The task_lock() is unnecessary
  Quoted from Linus [0]:
  : Since user space can randomly change their names anyway, using locking
  : was always wrong for readers (for writers it probably does make sense
  : to have some lock - although practically speaking nobody cares there
  : either, but at least for a writer some kind of race could have
  : long-term mixed results

Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lore.kernel.org/all/CAHk-=wivfrF0_zvf+oj6==Sh=-npJooP8chLPEfaFV0oNYTTBA@mail.gmail.com [0]
Link: https://lore.kernel.org/all/CAHk-=whWtUC-AjmGJveAETKOMeMFSTwKwu99v7+b6AyHMmaDFA@mail.gmail.com/
Link: https://lore.kernel.org/all/CAHk-=wjAmmHUg6vho1KjzQi2=psR30+CogFd4aXrThr2gsiS4g@mail.gmail.com/ [0]
Link: KSPP/linux#90 [1]
Signed-off-by: Yafang Shao <[email protected]>
Suggested-by: Linus Torvalds <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Matus Jokay <[email protected]>
Cc: Alejandro Colomar <[email protected]>
Cc: "Serge E. Hallyn" <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Justin Stitt <[email protected]>
Cc: Steven Rostedt (Google) <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Eric Paris <[email protected]>
Cc: James Morris <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Ondrej Mosnacek <[email protected]>
Cc: Paul Moore <[email protected]>
Cc: Quentin Monnet <[email protected]>
Cc: Simon Horman <[email protected]>
Cc: Stephen Smalley <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Dec 1, 2024
BUG: KASAN: slab-use-after-free in tcp_write_timer_handler+0x156/0x3e0
Read of size 1 at addr ffff888111f322cd by task swapper/0/0

CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc4-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1
Call Trace:
 <IRQ>
 dump_stack_lvl+0x68/0xa0
 print_address_description.constprop.0+0x2c/0x3d0
 print_report+0xb4/0x270
 kasan_report+0xbd/0xf0
 tcp_write_timer_handler+0x156/0x3e0
 tcp_write_timer+0x66/0x170
 call_timer_fn+0xfb/0x1d0
 __run_timers+0x3f8/0x480
 run_timer_softirq+0x9b/0x100
 handle_softirqs+0x153/0x390
 __irq_exit_rcu+0x103/0x120
 irq_exit_rcu+0xe/0x20
 sysvec_apic_timer_interrupt+0x76/0x90
 </IRQ>
 <TASK>
 asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:default_idle+0xf/0x20
Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90
 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 33 f8 25 00 fb f4 <fa> c3 cc cc cc
 cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90
RSP: 0018:ffffffffa2007e28 EFLAGS: 00000242
RAX: 00000000000f3b31 RBX: 1ffffffff4400fc7 RCX: ffffffffa09c3196
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff9f00590f
RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed102360835d
R10: ffff88811b041aeb R11: 0000000000000001 R12: 0000000000000000
R13: ffffffffa202d7c0 R14: 0000000000000000 R15: 00000000000147d0
 default_idle_call+0x6b/0xa0
 cpuidle_idle_call+0x1af/0x1f0
 do_idle+0xbc/0x130
 cpu_startup_entry+0x33/0x40
 rest_init+0x11f/0x210
 start_kernel+0x39a/0x420
 x86_64_start_reservations+0x18/0x30
 x86_64_start_kernel+0x97/0xa0
 common_startup_64+0x13e/0x141
 </TASK>

Allocated by task 595:
 kasan_save_stack+0x24/0x50
 kasan_save_track+0x14/0x30
 __kasan_slab_alloc+0x87/0x90
 kmem_cache_alloc_noprof+0x12b/0x3f0
 copy_net_ns+0x94/0x380
 create_new_namespaces+0x24c/0x500
 unshare_nsproxy_namespaces+0x75/0xf0
 ksys_unshare+0x24e/0x4f0
 __x64_sys_unshare+0x1f/0x30
 do_syscall_64+0x70/0x180
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

Freed by task 100:
 kasan_save_stack+0x24/0x50
 kasan_save_track+0x14/0x30
 kasan_save_free_info+0x3b/0x60
 __kasan_slab_free+0x54/0x70
 kmem_cache_free+0x156/0x5d0
 cleanup_net+0x5d3/0x670
 process_one_work+0x776/0xa90
 worker_thread+0x2e2/0x560
 kthread+0x1a8/0x1f0
 ret_from_fork+0x34/0x60
 ret_from_fork_asm+0x1a/0x30

Reproduction script:

mkdir -p /mnt/nfsshare
mkdir -p /mnt/nfs/netns_1
mkfs.ext4 /dev/sdb
mount /dev/sdb /mnt/nfsshare
systemctl restart nfs-server
chmod 777 /mnt/nfsshare
exportfs -i -o rw,no_root_squash *:/mnt/nfsshare

ip netns add netns_1
ip link add name veth_1_peer type veth peer veth_1
ifconfig veth_1_peer 11.11.0.254 up
ip link set veth_1 netns netns_1
ip netns exec netns_1 ifconfig veth_1 11.11.0.1

ip netns exec netns_1 /root/iptables -A OUTPUT -d 11.11.0.254 -p tcp \
	--tcp-flags FIN FIN  -j DROP

(note: In my environment, a DESTROY_CLIENTID operation is always sent
 immediately, breaking the nfs tcp connection.)
ip netns exec netns_1 timeout -s 9 300 mount -t nfs -o proto=tcp,vers=4.1 \
	11.11.0.254:/mnt/nfsshare /mnt/nfs/netns_1

ip netns del netns_1

The reason here is that the tcp socket in netns_1 (nfs side) has been
shutdown and closed (done in xs_destroy), but the FIN message (with ack)
is discarded, and the nfsd side keeps sending retransmission messages.
As a result, when the tcp sock in netns_1 processes the received message,
it sends the message (FIN message) in the sending queue, and the tcp timer
is re-established. When the network namespace is deleted, the net structure
accessed by tcp's timer handler function causes problems.

To fix this problem, let's hold netns refcnt for the tcp kernel socket as
done in other modules. This is an ugly hack which can easily be backported
to earlier kernels. A proper fix which cleans up the interfaces will
follow, but may not be so easy to backport.

Fixes: 26abe14 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Signed-off-by: Liu Jian <[email protected]>
Acked-by: Jeff Layton <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Dec 6, 2024
syzkaller reported a use-after-free of UDP kernel socket
in cleanup_bearer() without repro. [0][1]

When bearer_disable() calls tipc_udp_disable(), cleanup
of the UDP kernel socket is deferred by work calling
cleanup_bearer().

tipc_net_stop() waits for such works to finish by checking
tipc_net(net)->wq_count.  However, the work decrements the
count too early before releasing the kernel socket,
unblocking cleanup_net() and resulting in use-after-free.

Let's move the decrement after releasing the socket in
cleanup_bearer().

[0]:
ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at
     sk_alloc+0x438/0x608
     inet_create+0x4c8/0xcb0
     __sock_create+0x350/0x6b8
     sock_create_kern+0x58/0x78
     udp_sock_create4+0x68/0x398
     udp_sock_create+0x88/0xc8
     tipc_udp_enable+0x5e8/0x848
     __tipc_nl_bearer_enable+0x84c/0xed8
     tipc_nl_bearer_enable+0x38/0x60
     genl_family_rcv_msg_doit+0x170/0x248
     genl_rcv_msg+0x400/0x5b0
     netlink_rcv_skb+0x1dc/0x398
     genl_rcv+0x44/0x68
     netlink_unicast+0x678/0x8b0
     netlink_sendmsg+0x5e4/0x898
     ____sys_sendmsg+0x500/0x830

[1]:
BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline]
BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
 udp_hashslot include/net/udp.h:85 [inline]
 udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
 sk_common_release+0xaf/0x3f0 net/core/sock.c:3820
 inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437
 inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489
 __sock_release net/socket.c:658 [inline]
 sock_release+0xa0/0x210 net/socket.c:686
 cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
 kthread+0x531/0x6b0 kernel/kthread.c:389
 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244

Uninit was created at:
 slab_free_hook mm/slub.c:2269 [inline]
 slab_free mm/slub.c:4580 [inline]
 kmem_cache_free+0x207/0xc40 mm/slub.c:4682
 net_free net/core/net_namespace.c:454 [inline]
 cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
 kthread+0x531/0x6b0 kernel/kthread.c:389
 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244

CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c #7 91723d6f74857f70725e1583cba3cf4adc716cfa
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: events cleanup_bearer

Fixes: 26abe14 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Reported-by: syzkaller <[email protected]>
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Dec 7, 2024
Hou Tao says:

====================
This patch set fixes several issues for LPM trie. These issues were
found during adding new test cases or were reported by syzbot.

The patch set is structured as follows:

Patch #1~#2 are clean-ups for lpm_trie_update_elem().
Patch #3 handles BPF_EXIST and BPF_NOEXIST correctly for LPM trie.
Patch #4 fixes the accounting of n_entries when doing in-place update.
Patch #5 fixes the exact match condition in trie_get_next_key() and it
may skip keys when the passed key is not found in the map.
Patch #6~#7 switch from kmalloc() to bpf memory allocator for LPM trie
to fix several lock order warnings reported by syzbot. It also enables
raw_spinlock_t for LPM trie again. After these changes, the LPM trie will
be closer to being usable in any context (though the reentrance check of
trie->lock is still missing, but it is on my todo list).
Patch #8: move test_lpm_map to map_tests to make it run regularly.
Patch #9: add test cases for the issues fixed by patch #3~#5.

Please see individual patches for more details. Comments are always
welcome.

Change Log:
v3:
  * patch #2: remove the unnecessary NULL-init for im_node
  * patch #6: alloc the leaf node before disabling IRQ to low
    the possibility of -ENOMEM when leaf_size is large; Free
    these nodes outside the trie lock (Suggested by Alexei)
  * collect review and ack tags (Thanks for Toke & Daniel)

v2: https://lore.kernel.org/bpf/[email protected]/
  * collect review tags (Thanks for Toke)
  * drop "Add bpf_mem_cache_is_mergeable() helper" patch
  * patch #3~#4: add fix tag
  * patch #4: rename the helper to trie_check_add_elem() and increase
    n_entries in it.
  * patch #6: use one bpf mem allocator and update commit message to
    clarify that using bpf mem allocator is more appropriate.
  * patch #7: update commit message to add the possible max running time
    for update operation.
  * patch #9: update commit message to specify the purpose of these test
    cases.

v1: https://lore.kernel.org/bpf/[email protected]/
====================

Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Alexei Starovoitov <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Dec 8, 2024
Kernel will hang on destroy admin_q while we create ctrl failed, such
as following calltrace:

PID: 23644    TASK: ff2d52b40f439fc0  CPU: 2    COMMAND: "nvme"
 #0 [ff61d23de260fb78] __schedule at ffffffff8323bc15
 #1 [ff61d23de260fc08] schedule at ffffffff8323c014
 #2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1
 #3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a
 #4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006
 #5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce
 #6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced
 #7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b
 #8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362
 #9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25
    RIP: 00007fda7891d574  RSP: 00007ffe2ef06958  RFLAGS: 00000202
    RAX: ffffffffffffffda  RBX: 000055e8122a4d90  RCX: 00007fda7891d574
    RDX: 000000000000012b  RSI: 000055e8122a4d90  RDI: 0000000000000004
    RBP: 00007ffe2ef079c0   R8: 000000000000012b   R9: 000055e8122a4d90
    R10: 0000000000000000  R11: 0000000000000202  R12: 0000000000000004
    R13: 000055e8122923c0  R14: 000000000000012b  R15: 00007fda78a54500
    ORIG_RAX: 0000000000000001  CS: 0033  SS: 002b

This due to we have quiesced admi_q before cancel requests, but forgot
to unquiesce before destroy it, as a result we fail to drain the
pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here
try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and
simplify the code.

Fixes: 958dc1d ("nvme-rdma: add clean action for failed reconnection")
Reported-by: Yingfu.zhou <[email protected]>
Signed-off-by: Chunguang.xu <[email protected]>
Signed-off-by: Yue.zhao <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Dec 13, 2024
Its used from trace__run(), for the 'perf trace' live mode, i.e. its
strace-like, non-perf.data file processing mode, the most common one.

The trace__run() function will set trace->host using machine__new_host()
that is supposed to give a machine instance representing the running
machine, and since we'll use perf_env__arch_strerrno() to get the right
errno -> string table, we need to use machine->env, so initialize it in
machine__new_host().

Before the patch:

  (gdb) run trace --errno-summary -a sleep 1
  <SNIP>
   Summary of events:

   gvfs-afc-volume (3187), 2 events, 0.0%

     syscall            calls  errors  total       min       avg       max       stddev
                                       (msec)    (msec)    (msec)    (msec)        (%)
     --------------- --------  ------ -------- --------- --------- ---------     ------
     pselect6               1      0     0.000     0.000     0.000     0.000      0.00%

   GUsbEventThread (3519), 2 events, 0.0%

     syscall            calls  errors  total       min       avg       max       stddev
                                       (msec)    (msec)    (msec)    (msec)        (%)
     --------------- --------  ------ -------- --------- --------- ---------     ------
     poll                   1      0     0.000     0.000     0.000     0.000      0.00%
  <SNIP>
  Program received signal SIGSEGV, Segmentation fault.
  0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478
  478		if (env->arch_strerrno == NULL)
  (gdb) bt
  #0  0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478
  #1  0x00000000004b75d2 in thread__dump_stats (ttrace=0x14f58f0, trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4673
  #2  0x00000000004b78bf in trace__fprintf_thread (fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>, thread=0x10fa0b0, trace=0x7fffffffa5b0) at builtin-trace.c:4708
  #3  0x00000000004b7ad9 in trace__fprintf_thread_summary (trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4747
  #4  0x00000000004b656e in trace__run (trace=0x7fffffffa5b0, argc=2, argv=0x7fffffffde60) at builtin-trace.c:4456
  #5  0x00000000004ba43e in cmd_trace (argc=2, argv=0x7fffffffde60) at builtin-trace.c:5487
  #6  0x00000000004c0414 in run_builtin (p=0xec3068 <commands+648>, argc=5, argv=0x7fffffffde60) at perf.c:351
  #7  0x00000000004c06bb in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:404
  #8  0x00000000004c0814 in run_argv (argcp=0x7fffffffdc4c, argv=0x7fffffffdc40) at perf.c:448
  #9  0x00000000004c0b5d in main (argc=5, argv=0x7fffffffde60) at perf.c:560
  (gdb)

After:

  root@number:~# perf trace -a --errno-summary sleep 1
  <SNIP>
     pw-data-loop (2685), 1410 events, 16.0%

     syscall            calls  errors  total       min       avg       max       stddev
                                       (msec)    (msec)    (msec)    (msec)        (%)
     --------------- --------  ------ -------- --------- --------- ---------     ------
     epoll_wait           188      0   983.428     0.000     5.231    15.595      8.68%
     ioctl                 94      0     0.811     0.004     0.009     0.016      2.82%
     read                 188      0     0.322     0.001     0.002     0.006      5.15%
     write                141      0     0.280     0.001     0.002     0.018      8.39%
     timerfd_settime       94      0     0.138     0.001     0.001     0.007      6.47%

   gnome-control-c (179406), 1848 events, 20.9%

     syscall            calls  errors  total       min       avg       max       stddev
                                       (msec)    (msec)    (msec)    (msec)        (%)
     --------------- --------  ------ -------- --------- --------- ---------     ------
     poll                 222      0   959.577     0.000     4.322    21.414     11.40%
     recvmsg              150      0     0.539     0.001     0.004     0.013      5.12%
     write                300      0     0.442     0.001     0.001     0.007      3.29%
     read                 150      0     0.183     0.001     0.001     0.009      5.53%
     getpid               102      0     0.101     0.000     0.001     0.008      7.82%

  root@number:~#

Fixes: 54373b5 ("perf env: Introduce perf_env__arch_strerrno()")
Reported-by: Veronika Molnarova <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Veronika Molnarova <[email protected]>
Acked-by: Michael Petlan <[email protected]>
Tested-by: Michael Petlan <[email protected]>
Link: https://lore.kernel.org/r/Z0XffUgNSv_9OjOi@x1
Signed-off-by: Namhyung Kim <[email protected]>
nvidia-bfigg pushed a commit that referenced this pull request Dec 13, 2024
The 5760X (P7) chip's HW GRO/LRO interface is very similar to that of
the previous generation (5750X or P5).  However, the aggregation ID
fields in the completion structures on P7 have been redefined from
16 bits to 12 bits.  The freed up 4 bits are redefined for part of the
metadata such as the VLAN ID.  The aggregation ID mask was not modified
when adding support for P7 chips.  Including the extra 4 bits for the
aggregation ID can potentially cause the driver to store or fetch the
packet header of GRO/LRO packets in the wrong TPA buffer.  It may hit
the BUG() condition in __skb_pull() because the SKB contains no valid
packet header:

kernel BUG at include/linux/skbuff.h:2766!
Oops: invalid opcode: 0000 1 PREEMPT SMP NOPTI
CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Kdump: loaded Tainted: G           OE      6.12.0-rc2+ #7
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Dell Inc. PowerEdge R760/0VRV9X, BIOS 1.0.1 12/27/2022
RIP: 0010:eth_type_trans+0xda/0x140
Code: 80 00 00 00 eb c1 8b 47 70 2b 47 74 48 8b 97 d0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb a5 <0f> 0b b8 00 01 00 00 eb 9c 48 85 ff 74 eb 31 f6 b9 02 00 00 00 48
RSP: 0018:ff615003803fcc28 EFLAGS: 00010283
RAX: 00000000000022d2 RBX: 0000000000000003 RCX: ff2e8c25da334040
RDX: 0000000000000040 RSI: ff2e8c25c1ce8000 RDI: ff2e8c25869f9000
RBP: ff2e8c258c31c000 R08: ff2e8c25da334000 R09: 0000000000000001
R10: ff2e8c25da3342c0 R11: ff2e8c25c1ce89c0 R12: ff2e8c258e0990b0
R13: ff2e8c25bb120000 R14: ff2e8c25c1ce89c0 R15: ff2e8c25869f9000
FS:  0000000000000000(0000) GS:ff2e8c34be300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f05317e4c8 CR3: 000000108bac6006 CR4: 0000000000773ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <IRQ>
 ? die+0x33/0x90
 ? do_trap+0xd9/0x100
 ? eth_type_trans+0xda/0x140
 ? do_error_trap+0x65/0x80
 ? eth_type_trans+0xda/0x140
 ? exc_invalid_op+0x4e/0x70
 ? eth_type_trans+0xda/0x140
 ? asm_exc_invalid_op+0x16/0x20
 ? eth_type_trans+0xda/0x140
 bnxt_tpa_end+0x10b/0x6b0 [bnxt_en]
 ? bnxt_tpa_start+0x195/0x320 [bnxt_en]
 bnxt_rx_pkt+0x902/0xd90 [bnxt_en]
 ? __bnxt_tx_int.constprop.0+0x89/0x300 [bnxt_en]
 ? kmem_cache_free+0x343/0x440
 ? __bnxt_tx_int.constprop.0+0x24f/0x300 [bnxt_en]
 __bnxt_poll_work+0x193/0x370 [bnxt_en]
 bnxt_poll_p5+0x9a/0x300 [bnxt_en]
 ? try_to_wake_up+0x209/0x670
 __napi_poll+0x29/0x1b0

Fix it by redefining the aggregation ID mask for P5_PLUS chips to be
12 bits.  This will work because the maximum aggregation ID is less
than 4096 on all P5_PLUS chips.

Fixes: 13d2d3d ("bnxt_en: Add new P7 hardware interface definitions")
Reviewed-by: Damodharam Ammepalli <[email protected]>
Reviewed-by: Kalesh AP <[email protected]>
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

8 participants