Releases: Filipowicz251/mijia-1080P-hacks
0.8.7 RTSP working back (Tested)
- Resolved some issues with the RTSP Server
- Upgrading to 158 should be safe now
Install Instructions
- Copy the content (unzip) of the release to the root of the sdcard.
- Downgrade to firmware 0099 coping the file https://github.com/Filipowicz251/mijia-1080P-hacks/releases/download/0.8.1/tf_recovery.img into the root of the sdcard.
- Power on the camera.
- The camera will downgrade to 099 and the Tools will be installed (This could take a minute, the led will blink orange in the process)
- (Optinal/Test) When the camera is back on, check the Tools/hack is working using SSH.
- Using Xiaomi Mi Home app, upgrade to the latest version.
- (Optinal/Test) When the camera is back on, check the Tools/hack is working using SSH.
Note: The camera needs to be linked to your WIFI network before applying any hack.
If not, press the reset button and follow the instructions of paring the device.
Configure (After following instructions section)
- Check when powering on the camera the led blinks for 5 seconds yellow and blue.
- Power off the camera.
- Edit the configuration file, midgard.ini in the root of the sdcard, to enable the different services.
- Power on the camera and test SSH.
For RTSP
In midgard.ini set RTSP_ENABLED=1
Use any Streamer player with RTSP support, like VLC
Address: rtsp://CAMERA_IP/live/ch00_0
Issue Reporting
- Attached the log files in the camera and in the log folder
Known Issues
When flashing firmware 99 from the recovery image, the Camera stop streaming video. If for any reason is desired to stuck with that version, use release <0.8.X
0.8.6
- Resolved some issues with the RTSP Server
- Upgrading to 158 should be safe now
Install Instructions
- Copy the content (unzip) of the release to the root of the sdcard.
- Downgrade to firmware 0099 coping the file https://github.com/Filipowicz251/mijia-1080P-hacks/releases/download/0.8.1/tf_recovery.img into the root of the sdcard.
- Power on the camera.
- The camera will downgrade to 099 and the Tools will be installed (This could take a minute, the led will blink orange in the process)
- When the camera is back on, using Xiaomi Mi Home app, upgrade to the latest version.
Note: The camera needs to be linked to your WIFI network before applying any hack.
Issue Reporting
- Attached the log files in the camera and in the log folder
Configure (After following instructions section)
- Check powering on the camera the led blinks for 5 second yellow and blue.
- Power off the camera.
- Edit the configuration file, midgard.ini, to enable the different service.
- Power on the camera and test SSH or directly RTSP if enabled.
#For RTSP
use any Streamer player with RTSP support, like VLC
Address: rtsp://CAMERA_IP/live/ch00_0
0.8.5 New version
- Resolved some issues
- Upgrading to 158 should be safe now
Install Instructions
Copy the content of the release to the root of the sdcard.
Copy the file https://github.com/Filipowicz251/mijia-1080P-hacks/releases/download/0.8.1/tf_recovery.img into the root of the sdcard.
Power on the camera.
The camera will downgrade to 099 and the Tools will be installed (This could take a minute, the led will blink orange in the process)
When the camera is back on, using Xiaomi Mi Home app, upgrade to the latest version.
#Configure
Check powering on the camera the led blinks for 5 second yellow and blue.
Power off the camera.
Edit the configuration file, midgard.ini, to enable the different service.
Power on the camera and test SSH or directly RTSP if enabled.
For RTSP, use any Streamer player with RTSP support, like VLC
Address: rtsp://CAMERA_IP/live/ch00_0
Experimental (download at your own risk)
It might now work..... probably no... sometimes works...
Experimental (Do not download)
0.8.2 Experimental changes to avoid the toolset to be removed when RTSP is …
Fixing tool (do not download yet)
New Services (Experimental)
Changes
- Added SMB Protocol to connect to the Camera (a long SFTP)
- Added a lightweight HTTP server (in progress to provide some services)
- Added an experimental code to close rtsp when upgrading.
Known Issues
- Disabling CLOUD is not working as designed yet.
Notes
Streaming using Xiaomi Cloud Service and the RTSP will produce artifacts in the image and some frame drops.
Instructions
Copy the content of the release to the sdcard which needs to be in the camera all the time.
Important
Users with Firmware newer than X.138 without the toolset already working, you will have to downgrade to a previous version copying tf_recovery.img to the root of your sdcard. The the file can be found in the release 0.3 after renamin-it from tf_recovery.img.bak
- After powering the camera up, tf_recovery.img (Mijia 1080 only) will be loaded and the camera will be flashed with the release 0099
- Then, with this release already in the root of the SDCARD the tools will be automatically loaded and it is safe to upgrade to the latest release using the MiHome application ( use the default midgard.ini configuration, everything disabled except Xiaomi Streaming and Xiaomi Cloud)
Configure
After checking the camera restart and the blue and yellow leds blink for 5 seconds before turning fix blue, edit the configuration file, midgard.ini, to enable the different service.
For RTSP, use any Streamer player with RTSP support, like VLC
Address: rtsp://CAMERA_IP/live/ch00_0
0.7.1 Minor fixes
Changes
- Fixed the RTSP server not been loaded.
- Fixed (again) the change to English Audio for Wifi configuration
Known Issues
- Disabling CLOUD is not working as designed yet.
Instructions
Copy the content of the release to the sdcard which needs to be in the camera all the time.
Note
Users with Firmware newer than X.138 without the toolset already working, you will have to downgrade to a previous version copying tf_recovery.img to the root of your sdcard. The the file can be found in the release 0.3 after renamin-it from tf_recovery.img.bak
- After powering the camera up, tf_recovery.img (Mijia 1080 only) will be loaded and the camera will be flashed with the release 0099
- Then, with this release already in the root of the SDCARD the tools will be automatically loaded and it is safe to upgrade to the latest release using the MiHome application.
RTSP Use
Any Streamer player with RTSP support, like VLC
rtsp://CAMERA_IP/live/ch00_0
0.7 Fixes
Changes
- Resolved the issue to disable CLOUD Streaming (this improve drastically RTSP streaming)
Both streaming are not recommended - Resolved OTA issues after upgrading 139
Known Issues
- Disabling CLOUD is not working as designed yet.
Instructions
Copy the content of the release to the sdcard which needs to be in the camera all the time.
Note
Users with Firmware .139 without the toolset already working, you will have to downgrade to a previous version as well renaming the file tf_recovery.img.bak in the release 0.3 to tf_recovery.img and copy it to the root of your sdcard.
- After powering the camera up, tf_recovery.img (Mijia 1080 only) will be loaded and the camera will be flashed with the release 0099
- Then, the tools will be automatically loaded and it is safe to upgrade to the latest release using the MiHome application.
- If after upgrading the firmware the Tooling stop been accessible, try deleting the FT folder from the SDCARD
RTSP Use
Any Streamer player with RTSP support, like VLC
rtsp://CAMERA_IP/live/ch00_0
0.6c RTSP Server Optimized -- Extra Logging
Changes
- Added Extra logging when upgrading FW
- Added option to change type of bitrate (Experimental)
- Fixed a problem using the configuration file to change resolution
- RTSP server code cleaned a little more.
Instructions
Copy the content of the release to the sdcard which needs to be in the camera all the time.
Note
Users with Firmware .139 without the toolset already working, you will have to downgrade to a previous version as well renaming the file tf_recovery.img.bak in the release 0.3 to tf_recovery.img and copy it to the root of your sdcard.
- After powering the camera up, tf_recovery.img (Mijia 1080 only) will be loaded and the camera will be flashed with the release 0099
- Then, the tools will be automatically loaded and it is safe to upgrade to the latest release using the MiHome application.
- If after upgrading the firmware the Tooling stop been accessible, try deleting the FT folder from the SDCARD
RTSP Use
Any Streamer player with RTSP support, like VLC
rtsp://CAMERA_IP/live/ch00_0