upd docs

ReadMe.md

@@ -61,7 +61,7 @@
 	- **Hold right in received signal list to delete selected signal**
 	- **Custom buttons for Keeloq / Alutech AT4N / Nice Flor S / Somfy Telis / Security+ 2.0 / CAME Atomo** - now you can use arrow buttons to send signal with different button code
 	-   `Add manually` menu extended with new protocols
-	- FAAC SLH, BFT Mitto / Somfy Telis / Nice Flor S / CAME Atomo, etc.. manual creation with programming new remote into receiver (use button 0xF for BFT Mitto, 0x8 (Prog) on Somfy Telis)
+	- FAAC SLH, BFT Mitto / Somfy Telis / Nice Flor S / CAME Atomo, etc.. manual creation with programming new remote into receiver (use button 0xF for BFT Mitto, 0x8 (Prog) on Somfy Telis, (right arrow button for other protocols))
 	- Debug mode counter increase settings (+1 -> +5, +10, default: +1)
 	- Debug PIN output settings for protocol development
 

documentation/SubGHzRemoteProg.md

@@ -29,6 +29,13 @@ SEED -> Your seed from the remote button you got earlier
 8. Flipper will act as new remote, press Send button couple times near the receiver to register new remote
 9. Done!
 
+## Dea Mio
+1. Create new remote with randomly generated serial: Go to SubGHz -> Add Manually -> Dea Mio 433Mhz
+2. Open your new remote file
+3. Right arrow button on the flipper simulates press of hidden button in original remote
+4. Send button simulates one of basic buttons of the remote, can be programmed into the receiver
+5. Follow manufacturer instructions on new remotes programming
+
 ## AN-Motors AT4
 
 **This instruction for older boards, if your has no** `Learn` **button but has buttons** `F`, `CL`, `+`, `-` **read instruction from Alutech AT4N**