Diablo II character file parser

D2s is a binary parser written in Go that's used to parse .d2s files. This is the binary format that the game Diablo II uses to save all information about a certain character.

Motivation

This package was built for a private server of Diablo II called Slash Diablo to build an Armory for all characters on the server. Where anyone could see everything about a particular character at any given point in time. Here's a few examples.

• nokkasorc
• bluntakira
• freremort

Install

$ go get github.com/nokka/d2s

Usage

package main

import (
	"fmt"
	"log"
	"os"

	"github.com/nokka/d2s"
)

func main() {
	path := "nokka.d2s"
	file, err := os.Open(path)
	if err != nil {
		log.Fatal("Error while opening .d2s file", err)
	}

	defer file.Close()

	char, err := d2s.Parse(file)
	if err != nil {
		log.Fatal(err)
	}

	// Prints character name and class.
	fmt.Println(char.Header.Name)
	fmt.Println(char.Header.Class)
}

Binary layout

Header

The header is 765 byte long struct containing most of the character meta data.

Offset	Bytes	Description
0	4	Identifier
4	4	Version ID
8	4	File size
12	4	Checksum
16	4	Active weapon
20	16	Character Name
36	1	Character Status
37	1	Character progression
38	2	Unknown
40	1	Character Class
41	2	Unknown
43	1	Character Level
44	4	Unknown
48	4	Last played
52	4	Unknown
56	64	Assigned skills
120	4	Left mouse button skill ID
124	4	Right mouse button skill ID
128	4	Left swap mouse button skill ID
132	4	Right swap mouse button skill ID
136	32	Character menu appearance
168	3	Difficulty
171	4	Map ID
175	2	Unknown
177	2	Mercenary dead
179	4	Mercenary ID
183	2	Mercenary Name ID
185	2	Mercenary type
187	4	Mercenary experience
191	144	Unknown
335	298	Quests
633	81	Waypoints
714	51	NPC Introductions

Character name

Character names are storted as a [16]byte which will contain the name, one letter per byte. The name can be 16 characters long, and a name that's shorter will have padded 0x00's behind the name until we reach 16 bytes.

• Must be 2-15 in length
• Must begin with a letter
• May contain up to one - or _.

Character status

Character status is a byte where different bits will be set, depending on the status of the character. Still haven't figured them all out, but here's the most important ones.

Bit position

7	6	5	4	3	2	1	0
?	?	Expansion	?	Died	Hardcore	?	?

Character progression

Not implemented yet.

The value is incremented every time you kill an act boss.

Classic

Value	Standard	Hardcore
0-3	-	-
4-7	Sir/Dame	Count/Countess
8-11	Lord/Lady	Duke/Duchess
12	Baron/Baroness	King/Queen

Expansion

Value	Expansion	Expansion hardcore
0-3	-	-
5-8	Slayer	Destroyer
10-13	Champion	Conqueror
15	Patriarch/Matriarch	Guardian

Character class

Character class is a byte where different values represent a class.

Class	Value
Amazon	0x00
Sorceress	0x01
Necromancer	0x02
Paladin	0x03
Barbarian	0x04
Druid	0x05
Assassin	0x06

Last played

Last played is saved as a unit32 unix timestamp e.g 1495882861.

Assigned skills

Assigned skills section is a an array of 16 skill ids, each a 4 byte integer (uint32). If no skill is assigned the value is 0x00.

Quests

The quests struct is 298 byte section that describes all quests in the game but also contains data about act traveling and NPC introductions. Each quest is 2 byte long.

Header

Offset	Bytes	Content
335	4	Woo!
339	6	Unknown

Quest structs

A quest is 2 byte long, I've created a general quest struct that holds the most important data of a quest, if it's completed or not. Each quest has a lot of unique bits set depending on different milestones of the quest. For example if you've consumed the Scroll of Resistance from the quest "Prison of Ice" or not.

General

Bit	Description
0	Quest completed

Prison of Ice

Prison of Ice is the only quest I bothered to implement, because I needed to know if the character has increased resistances from the scroll or not.

Bit	Description
0	Quest completed
7	Consumed scroll

Quest structure

This structure repeats it self 3 times, once for Normal, Nightmare and Hell. The offset is the offset into the quest struct.

Offset	Bytes	Description
0	2	Set to 1 if you have been introduced to Warriv in Act I.
2	[6]quest	All six quests for Act I.
14	2	Set to 1 if you have traveled to Act II.
16	2	Set to 1 if you have been introduced to Jerhyn.
18	[6]quest	All six quests for Act II.
30	2	Set to 1 if you have traveled to Act III.
32	2	Set to 1 if you have been introduced to Hratli.
34	[6]quest	All six quests for Act III.
46	2	Set to 1 if you have traveled to Act IV.
48	2	Set to 1 if you have been introduced to Act IV. (which you have if you have traveled)
50	[6]quest	Act IV only has 3 quests, so the struct has 6 empty bytes here.
62	2	Set to 1 if you have traveled to Act V.
64	2	Seems to be set to 1 after completing Terror's End and talking to Cain in act IV.
66	4	Seems to be some kind of padding.
70	[6]quest	All six quests for Act V.
82	14	Some kind of padding after all the quest data.

Waypoints

Not implemented

NPC Introductions

Not implemented

Attributes

Following the header is the attributes section, this sections layout consists of an array of 9 bit attribute id, followed by a n bit length attribute value. The section is terminated by a 9 bit value of 0x1ff. It's worth mentioning that these fields are bit reversed. Basically if you find the bits 00100111 they are reversed into 11100100.

Attribute IDs

ID	Attribute
0	Strength
1	Energy
2	Dexterity
3	Vitality
4	Unused stats
5	Unused skills
6	Current HP
7	Max HP
8	Current mana
9	Max mana
10	Current stamina
11	Max stamina
12	Level
13	Experience
14	Gold
15	Stashed gold

Attribute bit lengths

Bit length	Attribute
10	Strength
10	Energy
10	Dexterity
10	Vitality
10	Unused stats
8	Unused skills
21	Current HP
21	Max HP
21	Current mana
21	Max mana
21	Current stamina
21	Max stamina
7	Level
32	Experience
25	Gold
25	Stashed gold

Example of the reading

for {
    // 1. read 9 bits id. (reverse them)
    // 2. if the id is 0x1ff, terminate the loop
    // 3. read bit length from attribute map for that id.
    // 4. read bit length nr of bits. 
}

3. Skills

Skills are a 32 byte section containing a 2 byte header with the value if and 30 byte of skill data. Each class has 30 skills available to them, so each skill get 1 byte each. The tricky part about the skill mapping is that each class has a different offset into the skill map where their class specific skills start, and then go 30 indexes into the map. So for example Assassin has an offset of 251. Which means Assassin skills are between the indexes of 251 and 281 which is exactly 30 indexes.

Layout

Type	Bytes	Value
Header	2	if
Skills	30	[30]skill

Skill offset map

Class	Offset
Amazon	6
Sorceress	36
Necromancer	66
Paladin	96
Barbarian	126
Druid	221
Assassin	251

4. Items

This is by far the most tricky part to read. The items section starts of with a 4 byte header, containing the value JM, and a uint16 value which is the item count your character currently has. Equipped, inventory, stash, cube and belt all included.

The byte length of the section is unknown before reading it in it's entirety, because the bit length of each item varies depending on its quality, number of sockets and magical attributes it possess.

Each item follows a certain pattern though, which is:

Simple items

Each item starts of with 111 bits of simple data, which all items contain. This is information like item type, if it's socketed, position id like equipped or stash and so on.

Each item also has a boolean called SimpleItem which is 1 bit long, if this is set to 1, the item contains no more bits, and the next item starts.

Advanced items

If the item is not a simple items, this means it will have tons of data following the initial 111 bits. A few examples of this is the rarity level, magical suffix, magical affix, if it's a runeword, personalized, part of a set, class specific and so on.

Last but not least if the item has will have lists of magical properties depending on if it's a runeword, magical, rare, crafted, unique part of set and so on.

These lists are similar to the attributes section where we will read:

1. 9 bit id
2. n bits of magical properties
3. 0x1ff terminator

When we hit the terminator 0x1ff the next item begins.

Magical properties

A magical property is a unique property that can occur on an item, each property has a different bit length, and the map is huge.

Example

This is the magical property with id 83 which contains 2 bit fields each 3 bits long.

83: {Bits: []uint{3, 3}, Name: "+{1} to {0} Skill Levels"},

All magical properties are mapped in the item.go file.

5. Corpse data

If your character is currently dead, and a corpse is on the ground when you enter a game, your equipped items will be in this item struct. It's a corpse header 16 bytes containing the header JM followed by an item count similar to the item list.

Reading the corpse items are done in the exact way as the previous section of items.

6. Expansion data

If your character is created in the expansion Lord of Destruction if will contain 2 more sections.

7. Mercenary items

The mercenary sections starts of with a 2 byte header with the value jf and is followed by a 4 byte item header containing the number of items the mercenary is currently wearing. The items are read like any other item list.

8. Golem

If your character is both a Necromancer and an expansion character, this section starts of with a 3 byte header, where the first two bytes are the header kf followed by a boolean called hasGolem, if this value is true, there's an item list with the length 1 following the header.

Contributing

Please see CONTRIBUTING.md.