Sleep As Android custom integration

This integration will allow you to get events from your SleepAsAndroid application in a form of the sensor states and events in Home assistant.

Installation & configuration

Requirements

You will need:

• Home Assistant with configured MQTT integration
  example of configuration.yaml:

  mqtt:
    broker: mqtt.myserver
    port: 1883
    username: ha_user
    discovery: true 

• Sleep As android application
  • go to Settings -> Services -> Automatization -> MQTT
  • enable and configure MQTT

Installation

• go to HACS -> Integrations
• press + Explore & Add repositories button
• type Sleep As Android in search field and click at integration name
• press Install this repository to HACS button
• press Install button (if you have outdated version of Home Assistant -- check integration version in Wiki )
• restart Home Assistant
• go to Home Assistant Settings -> Integrations -> Add Integration (right bottom conner)
• type Sleep As Android in search field and click at integration name. Clean browser cache if nothing found.

Configuration

Component configuration

• Name: name of the device/sensor and a prefix for the events. Will be used as a default prefix for devices and events.
• Topic template: template for MQTT topic where Sleep as Android will publish event. %%%device%%% may be used in template to point to device name position. Examples:
  • SleepAsAndroid/igor - no %%%device%%% in template just one device will be tracked and one device will be created for HomeAssistant
  • SleepAsAndroid/%%%device%%% - all sub topics in SleepAsAndroid/ will be recognized as devices
  • devices/%%%device%%%/SleepAsAndroidData - all subtopic in devices/ will be used as devices, data will be taken from /SleepAsAndroidData for every device, ie devices/igor/SleepAsAndroidData for device igor
• QOS: quality of service for MQTT

Application configuration

To configure Sleep As Android for working with this integration:

1. Go to application settings
2. Find Services in integration section
3. Go to Automation
4. Find MQTT section

Then:

• Enable it
• URL is a URL for your MQTT server. It should look like tcp://mqtt_user:mqtt_password@mqtt_host:mqtt_port
• Topic is a topic name where the application will publish events. See Topic template section of component configuration for details. Application settings MUST NOT have %%%device%%% macro. Use desired device name at position of %%%device%%% of integration configuration. Examples related to integration configuration above: SleepAsAndroid/igor or devices/igor/SleepAsAndroidData. Device name will be "igor" in both cases.
• Client ID is any ID. It is not used by integration and is not published to MQTT (now).

More details in Wiki.

Usage

blueprint (recommended)

1. import blueprint:
   1. Got to Home Assistant settings
   2. blueprints
   3. import blueprint button
   4. put blueprint URL
   5. press preview button
   6. press import button
2. create automatization based on blueprint:
   • person and state is using to run actions only if person in state (to avoid run home automatization related to sleep tracking while vacation in Siberia, for example)
   • add actions for evens

on device event

1. select Device in automatization trigger and use SleepAsAndroid device;
2. select trigger from a list.

events will be fired up for every MQTT message

on sensor state change

<name> is an integration name in lower case without spaces from the Settings dialog. <device> is a device name List of events is available at Sleep As Android documentation page

State of sensor sensor.<name>_<device> will contain the recent event name, that got published by the application.

on event

<name> is an integration name in lower case without spaces from the Settings dialog. If application publishes a new event, then integration fires <name> event with payload:

{
  "event": "<event_name_from_application>"
}

events will be fired up for every MQTT message

Attributes

Sensor have additional attributes:

• timestamp -- value1 from application event. It is usually timestamp of something. Meaning is depended on event. Please check Sleep As Android events documentation for more details;
• label -- value2 from application event. It is usually alarm label. You can use this attribute to tell one alarm from another.

If event have no value<N> field, then attribute will be set to unknown.

Troubleshooting

configuration.yaml:

logger:
  default: warning
  logs:
    custom_components.sleep_as_android: debug