KiKit is now adding Fiducials/etc for mousebites to CPL file

[gcormier]

I think this is new as I never had this issue previously.

My CPL file now has

...
"D1","LED","LED_Cree-XP",20.8965,46.1991,-90.0000,top
"D1","LED","LED_Cree-XP",46.1965,46.1991,-90.0000,top
"D1","LED","LED_Cree-XP",71.4965,71.4991,-90.0000,top
"D1","LED","LED_Cree-XP",46.1965,20.8991,-90.0000,top
"D1","LED","LED_Cree-XP",71.4965,46.1991,-90.0000,top
"D1","LED","LED_Cree-XP",46.1965,71.4991,-90.0000,top
"KiKit_FID_B_1","Fiducial","Fiducial",15.0000,88.5483,0.0000,bottom
"KiKit_FID_B_2","Fiducial","Fiducial",77.3965,88.5483,0.0000,bottom
"KiKit_FID_B_3","Fiducial","Fiducial",15.0000,3.8500,0.0000,bottom
"KiKit_FID_B_4","Fiducial","Fiducial",77.3965,3.8500,0.0000,bottom
"KiKit_FID_T_1","Fiducial","Fiducial",15.0000,88.5483,0.0000,top
"KiKit_FID_T_2","Fiducial","Fiducial",77.3965,88.5483,0.0000,top
"KiKit_FID_T_3","Fiducial","Fiducial",15.0000,3.8500,0.0000,top
"KiKit_FID_T_4","Fiducial","Fiducial",77.3965,3.8500,0.0000,top
"KiKit_MB_1_5","NPTH","NPTH",9.8418,73.2797,0.0000,top
"KiKit_MB_1_6","NPTH","NPTH",10.0688,74.4500,0.0000,top
"KiKit_MB_1_3","NPTH","NPTH",9.7158,70.9034,0.0000,top
"KiKit_MB_1_2","NPTH","NPTH",9.8418,69.7185,0.0000,top
...

That said, it is my first time using mousebites instead of v-cuts. How do I tell KiKit not to add these to my position file?

[yaqwsx]

This was an intentional change as several fab houses require them (cfe7fa1). Based on the research, we found that it is pretty easy to just ignore them at the places that do not require them (e.g., JLC PCB) and they don't break the workflow.

Thus, there isn't an option to ignore them. Could you describe your use case where you mind them? It can help me to properly reflect it (and add suitable option to ignore them).

[gcormier]

JLC workflow no longer works. It notices the CPL file does not match the BOM file when you upload them.

[gcormier]

Opened an issue in hopes a future version will provide that option :) #609

[yaqwsx]

For future reference: Combination panelize by KiKit, and export by KiKit works as expected. The problem is when KiBot is used for export.