Marionette

Looking for a co-maintainer for Marionette. If interested just respond in the issue titled "Looking for a co-maintainer".

Marionette is a one-size-fits-all approach to WebDriver adapters. It works with most all web driver implementations, including:

Chrome
Chromium
Firefox
Safari
Edge
Internet Explorer
Opera
PhantomJS
Webkit GTK
WPE Webkit
Android

Installation

Make sure you have Crystal installed. This is a Crystal project and Crystal is required for usage. If you don't have it installed, see https://crystal-lang.org.

Add Marionette to an existing project by adding the dependency to your shard.yml

dependencies:
  marionette:
    github: watzon/marionette
    branch: master

Run shards install to download and install Marionette as a dependency.
Download and have installed at least one WebDriver. See the #webdriver section below for links to various downloads.

WebDriver

WebDriver is a protocol which allows browser implementations to be remote controlled via a common interface. It's because of this functionality that frameworks like Marionette are possible. To use the protocol you first have to have installed one of the many WebDriver implementations, here are some of those:

Firefox

GeckoDriver is implemented and supported by Mozilla directly.

Downloads
Documentation

Chrome

ChromeDriver is implemented and supported by the Chromium Project.

Downloads
Documentation

Opera

OperaChromiumDriver is implemented and supported by Opera Software.

Downloads
Documentation

Safari

SafariDriver is implemented and supported directy by Apple. It comes pre-installed with Safari and Safari Technology Preview.

Documentation

Edge

Microsoft is implementing and maintaining the Microsoft Edge WebDriver.

Downloads
Documentation

Internet Explorer

Only version 11 is supported, and it requires additional configuration.

Note: Marionette specific configuration instructions coming soon.

Getting Started

The goal of Marionette is simplicity, which is why it's written in Crystal. Once you have a webdriver installed and sitting comfortably on your path, using it couldn't be easier:

require "marionette"

session = Marionette::WebDriver.create_session(:chrome)

# Navigate to crystal-lang.org
session.navigate("https://crystal-lang.org")

# Start an action chain and perform it
session.perform_actions do
  # Click the "INSTALL" link
  click ".main-actions a:nth-child(1)"
end

sleep 5
session.close

Driver Capabilities

Different drivers have different capabilities available to them. To make setting them a little easier, there's the DriverOptions module which is extended by Marionette itself. Take, for instance, Chrome:

# Make this instance headless
options = Marionette.chrome_options(args: ["headless"])

# Create a Chrome session
session = Marionette::WebDriver.create_session(:chrome, capabilities: options)

args in this case are arguments to be passed to the browser itself rather than the driver. If you wish to pass arguments to the driver you can use the args parameter in the create_session method.

Browser Manipulation

As shown above, you can initialize a new driver session for whatever driver you want using Marionette::WebDriver.create_session, the first and most important argument to which is :browser. Browser can be any of :chrome, :firefox, :opera, :safari, :edge, :internet_explorer, :webkit_gtk, :wpe_webkit, or :android.

If the driver for the chosen browser is installed under its usual name that should be all you need to do, if not you may need to provide the binary location via the :exe_path argument. Other notable arguments are:

:port - sets the port you want the driver to listen on
:env - a hash of environment variables for the driver to be aware of
:args - a string array of arguments to pass to the webdriver process
:options - a JSON compatible structure containing browser options. see here for some nice helpers.

Navigation

`#navigate`

The first thing you will want to do after launching a browser is to open your website. This can be achieved in a single line:

session.navigate("https://crystal-lang.org")

`#current_url`

You can read the current URL from the browser’s address bar using:

session.current_url
# => https://crystal-lang.org

`#back`

Pressing the browser’s back button:

session.back

`#forward`

Pressing the browser’s forward button:

session.forward

`#refresh`

Refresh the current page:

session.refresh

`#title`

You can read the current page title from the browser:

session.title
# => Crystal | The Crystal Programming Language

Windows and Tabs

WebDriver does not make the distinction between windows and tabs. If your site opens a new tab or window, Marionette will let you work with it using a window handle. Each window has a unique identifier which remains persistent in a single session.

`#current_window`

You can get the currently active window using:

session.current_window

This returns a Window instance containing a handle and allowing certain functions to be performed directly on the window instance.

`#windows`

You can get an array of all currently opened windows using:

session.windows

`#new_window`

You can create a new window or tab using:

session.new_window(:window) # default
session.new_window(:tab)

# Or using the Window object

Marionette::Window.new(:window) # default
Marionette::Window.new(:tab)

`#switch_to_window`

To interact with other windows you have to switch to them, this can be done with:

session.switch_to_window(window)

# Or using the Window object

window.switch

`#close_window`

When you are finished with a window or tab and it is not the last window or tab open in your browser, you should close it and switch back to the window you were using previously:

session.close_window(window)

# Or using the Window object

window.close

`#close_current_window`

Think of this is a shortcut to #close_window but for the currently active window:

session.close_current_window

`#stop`

When you are finished with the browser session you should call stop, instead of close:

session.stop

Stop will:

Close all the windows and tabs associated with that WebDriver session
Close the browser process
Close the background driver process

Stop will be automatically closed on process exit.

Frames and IFrames

Frames are a now deprecated means of building a site layout from multiple documents on the same domain. You are unlikely to work with them unless you are working with an pre HTML5 webapp. Iframes allow the insertion of a document from an entirely different domain, and are still commonly used.

If you need to work with frames or iframes, WebDriver allows you to work with them in the same way. Consider a button within an iframe. If we inspect the element using the browser development tools, we might see the following:

<div id="modal">
  <iframe id="buttonframe" name="myframe"  src="https://watzon.github.io">
   <button>Click here</button>
 </iframe>
</div>

If it was not for the iframe we would expect to click on the button using something like:

session.find_element!("button").click

However, if there are no buttons outside of the iframe, you might instead get a no such element error. This happens because Marionette is only aware of the elements in the top level document. To interact with the button, we will need to first switch to the frame, in a similar way to how we switch windows. WebDriver offers three ways of switching to a frame.

`#switch_to_frame`

The switch_to_frame session method allows us to tell the WebDriver that we want to switch the page context to the given frame/iframe:

# Find the element
iframe = session.find_element!("#modal>iframe")

# Switch to the frame
session.switch_to_frame(iframe)

# Now we can click the button
session.find_element!("button").click

`#switch_to_parent_frame`

If you're in a nested set of frames you can switch back to the parent frame using:

session.switch_to_parent_frame

`#leave_frame`

When you're done inside a frame and want to get back to the normal document context you can use:

session.leave_frame

Window Management

Screen resolution can impact how your web application renders, so WebDriver provides mechanisms for moving and resizing the browser window.

`#size`

You can fetch window dimensions either collectively or individually:

# First get the current window
window = session.current_window

# Access dimensions individually
width = window.width
height = window.height

# Or collectively as a Size object
window.size
# => Size(width: 800.0, height: 600.0)

`#resize_to`

To resize the window:

window.resize_to(600, 800)

# Or using an existing Size object `size`

window.size = size

`#position`

You can fetch the coordinates of the top left corner of the browser window:

window.position
# => Location(x: 0.0, y: 0.0)

`#move_to`

You can also easily set the position of the window:

window.move_to(250, 250)

# Or using a Location object `location`

window.position = location

`#maximize`

To maximize the given window:

window.maximize

`#minimize`

To minimize the given window:

window.minimize

`#fullscreen`

To make the given window full screen:

window.fullscreen

Working with Elements

Element represents a DOM element. WebElements can be found by searching from the document root using a WebDriver instance, or by searching under another Element.

WebDriver API provides built-in methods to find the WebElements which are based on different properties like ID, Name, Class, XPath, CSS Selectors, link Text, etc.

`#active_element`

Get and return the active element:

session.active_element

`#find_element`

find_element and find_element! are used to find and store references to page elements. The only difference between the two is that find_element! will throw an exception if the element is not found and will not be nil, whereas find_element will return nil if the element is not found.

# Get the search box element by name
search_bar = session.find_element!("q", :name)

# Peform an action
search_bar.send_keys("Crystal programming language")

# Click the submit button (using the default :css option this time)
session.find_element!("button.submit").click

`#find_elements`

Used to find an array of elements matching the given selector:

# Get all elements with the tag name "p"
elements = session.find_elements("p", :tag_name)

elements.each do |el|
  puts el.text
end

`#find_child`

Used to find a child element within the context of parent element. Like find_element it has raising and non-raising varients:

# Find the search form
form = session.find_element!("form", :tag_name)

# Find the form's child search box
search_bar = form.find_child!("q", :name)

search_bar.send_keys("Crystal programming language")

`#find_children`

Just like find_elements and find_child:

element = session.find_element!("div", :tag_name)

paragraphs = element.find_children("p", :tag_name)

paragraphs.each do |para|
  puts para.text
end

Contributing

Fork it ( https://github.com/watzon/marionette/fork )
Create your feature branch (git checkout -b my-new-feature)
Commit your changes (git commit -am 'Add some feature')
Push to the branch (git push origin my-new-feature)
Create a new Pull Request

Contributors

This project exists thanks to all the people who contribute.

Files

README.md

Latest commit

History

README.md

File metadata and controls

Marionette

Table of Contents

Installation

WebDriver

Firefox

Chrome

Opera

Safari

Edge

Internet Explorer

Getting Started

Driver Capabilities

Browser Manipulation

Navigation

#navigate

#current_url

#back

#forward

#refresh

#title

Windows and Tabs

#current_window

#windows

#new_window

#switch_to_window

#close_window

#close_current_window

#stop

Frames and IFrames

#switch_to_frame

#switch_to_parent_frame

#leave_frame