Skip to content

Latest commit

 

History

History
35 lines (25 loc) · 1.72 KB

README.md

File metadata and controls

35 lines (25 loc) · 1.72 KB
Raw

STM32F407_MCUDriverDevelopment

STM32F407 MCU - Discovery Development Board Follow along with the development from scratch and other projects at: https://chicgeek.blogspot.com/

Creating Device header file, peripheral header files (GPIO, I2C, SPI, UART) and an application from scratch to understand MCU driver development

stm32f407xx.h/.c: Device driver

Contains register addresses and macros - derived from the User Manual

stm32f407xx_gpio_driver.h/.c: GPIO Peripheral driver

Contains macros and definitions to use the GPIO - derived from the User Manual.

001_LED_Toggle.c

Test Project to validate drivers by flashing the onboard LED via Pullup/Pulldown Output Type Test Project to validate drivers by flashing the onboard LED via Open Drain Output Type and external Pullup Resistor

002_LED_Btn.c

Test Project to validate drivers by reading input pin button state, and toggling LED accordingly.

003_Ext_LED_Btn.c

Test Project to validate drivers by reading input pin button state, and toggling LED accordingly from External components

004_Interrupt_Btn.c

Test Project to validate drivers reading input state of a button, generating an interrupt, and handling it to toggle an LED.

005_Interrupt_Btn2.c

Test Project to validate drivers generating an interrupt on button press, and handling it to toggle an LED - using configured GPIO settings.

006_SPI_TxData.c

Test Project to validate drivers for SPI communications. Send 'Hello World'

007_SPI_Arduino_SL

Test project using the STM32407 as the SPI Master, and an Arduino as the SPI Slave. And snickering at the 007/SPI puns. SPI in full duplex, DFF=0, SSM=0, SCLK = 2MHz, fclk = 16MHz. Arduino does not return data -> MISO not required. In progress