Importing a kicad_mod doesn't work when it's in a `<group />`

[seveibar]

e.g. this doesn't work

https://github.com/tscircuit/minimal-rp2040

import importedRp2040KicadMod from "./RP2040-QFN-56.kicad_mod";

export const Rp2040MinimalBoard = () => (
	<board routingDisabled pcbPack width="65mm" height="60mm">
		<group name="MCU">
			<chip
				name="U3"
				footprint={importedRp2040KicadMod}
				pinLabels={{
					pin1: "GPIO0",
					pin2: "GPIO1",
					pin3: "GPIO2",
					pin4: "GPIO3",
					pin5: "GPIO4",
					pin6: "GPIO5",
					pin7: "GPIO6",
					pin8: "GPIO7",
					pin9: "GPIO8",
					pin10: "GPIO9",
					pin11: "GPIO10",
					pin12: "GPIO11",
					pin13: "GPIO12",
					pin14: "GPIO13",
					pin15: "GPIO14",
					pin16: "GPIO15",
					pin17: "GPIO16",
					pin18: "GPIO17",
					pin19: "GPIO18",
					pin20: "GPIO19",
					pin21: "GPIO20",
					pin22: "GPIO21",
					pin23: "GPIO22",
					pin24: "GPIO23",
					pin25: "GPIO24",
					pin26: "GPIO25",
					pin27: "GPIO26_ADC0",
					pin28: "GPIO27_ADC1",
					pin29: "GPIO28_ADC2",
					pin30: "GPIO29_ADC3",

					pin31: "QSPI_SS",
					pin32: "QSPI_SD0",
					pin33: "QSPI_SD1",
					pin34: "QSPI_SD2",
					pin35: "QSPI_SD3",
					pin36: "QSPI_SCLK",

					pin37: "XIN",
					pin38: "XOUT",

					pin39: "RUN",
					pin40: "SWCLK",
					pin41: "SWD",

					pin42: "USB_DP",
					pin43: "USB_DM",

					pin44: "VREG_IN",
					pin45: "VREG_VOUT",
					pin46: "DVDD",
					pin47: "DVDD2",

					pin48: "IOVDD",
					pin49: "IOVDD2",
					pin50: "USB_VDD",
					pin51: "ADC_AVDD",
					pin52: "IOVDD3",
					pin53: "IOVDD4",
					pin54: "IOVDD5",

					pin55: "GND1",
					pin56: "GND2",
				}}
				connections={{
					// Supplies
					VREG_IN: "net.V3V3",
					VREG_VOUT: "net.V1V1",
					DVDD: "net.V1V1",
					DVDD2: "net.V1V1",

					IOVDD: "net.V3V3",
					IOVDD2: "net.V3V3",
					IOVDD3: "net.V3V3",
					IOVDD4: "net.V3V3",
					IOVDD5: "net.V3V3",
					USB_VDD: "net.V3V3",
					ADC_AVDD: "net.V3V3",

					GND1: "net.GND",
					GND2: "net.GND",

					// Clocks
					XIN: "net.XIN",
					XOUT: "net.XOUT",

					// Debug / reset
					RUN: "net.RUN",
					SWCLK: "net.SWCLK",
					SWD: "net.SWD",

					// QSPI flash
					QSPI_SS: "net.QSPI_SS",
					QSPI_SD0: "net.QSPI_SD0",
					QSPI_SD1: "net.QSPI_SD1",
					QSPI_SD2: "net.QSPI_SD2",
					QSPI_SD3: "net.QSPI_SD3",
					QSPI_SCLK: "net.QSPI_SCLK",

					// USB – internal side (before 27Ω series Rs)
					USB_DP: "net.USB_DP_INT",
					USB_DM: "net.USB_DM_INT",

					// GPIOs
					GPIO0: "net.GPIO0",
					GPIO1: "net.GPIO1",
					GPIO2: "net.GPIO2",
					GPIO3: "net.GPIO3",
					GPIO4: "net.GPIO4",
					GPIO5: "net.GPIO5",
					GPIO6: "net.GPIO6",
					GPIO7: "net.GPIO7",
					GPIO8: "net.GPIO8",
					GPIO9: "net.GPIO9",
					GPIO10: "net.GPIO10",
					GPIO11: "net.GPIO11",
					GPIO12: "net.GPIO12",
					GPIO13: "net.GPIO13",
					GPIO14: "net.GPIO14",
					GPIO15: "net.GPIO15",
					GPIO16: "net.GPIO16",
					GPIO17: "net.GPIO17",
					GPIO18: "net.GPIO18",
					GPIO19: "net.GPIO19",
					GPIO20: "net.GPIO20",
					GPIO21: "net.GPIO21",
					GPIO22: "net.GPIO22",
					GPIO23: "net.GPIO23",
					GPIO24: "net.GPIO24",
					GPIO25: "net.GPIO25",
					GPIO26_ADC0: "net.GPIO26_ADC0",
					GPIO27_ADC1: "net.GPIO27_ADC1",
					GPIO28_ADC2: "net.GPIO28_ADC2",
					GPIO29_ADC3: "net.GPIO29_ADC3",
				}}
			/>
		</group>
	</board>
);

but it works if you remove the group

[RaghavArora14]

can i give this a shot?