diff --git a/add-wifi-injection-4.14.patch b/add-wifi-injection-4.14.patch
deleted file mode 100644
index 0b872f83f3ca..000000000000
--- a/add-wifi-injection-4.14.patch
+++ /dev/null
@@ -1,130 +0,0 @@
---- a/net/mac80211/cfg.c
-+++ b/net/mac80211/cfg.c
-@@ -580,7 +580,8 @@ static int ieee80211_set_monitor_channel
- 			ret = ieee80211_vif_use_channel(sdata, chandef,
- 					IEEE80211_CHANCTX_EXCLUSIVE);
- 		}
--	} else if (local->open_count == local->monitors) {
-+       // Patch: Always allow channel change, even if a normal virtual interface is present
-+       } else /*if (local->open_count == local->monitors)*/ {
- 		local->_oper_chandef = *chandef;
- 		ieee80211_hw_config(local, 0);
- 	}
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -795,11 +795,19 @@ ieee80211_tx_h_sequence(struct ieee80211
- 
- 	/*
- 	 * Packet injection may want to control the sequence
--	 * number, if we have no matching interface then we
--	 * neither assign one ourselves nor ask the driver to.
-+	 * number, so if an injected packet is found, skip
-+	 * renumbering it. Also make the packet NO_ACK to avoid
-+	 * excessive retries (ACKing and retrying should be
-+	 * handled by the injecting application).
-+	 * FIXME This may break hostapd and some other injectors.
-+	 * This should be done using a radiotap flag.
- 	 */
--	if (unlikely(info->control.vif->type == NL80211_IFTYPE_MONITOR))
-+	if (unlikely((info->flags & IEEE80211_TX_CTL_INJECTED) &&
-+	   !(tx->sdata->u.mntr.flags & MONITOR_FLAG_COOK_FRAMES))) {
-+		if (!ieee80211_has_morefrags(hdr->frame_control))
-+			info->flags |= IEEE80211_TX_CTL_NO_ACK;
- 		return TX_CONTINUE;
-+	}
- 
- 	if (unlikely(ieee80211_is_ctl(hdr->frame_control)))
- 		return TX_CONTINUE;
-@@ -1659,7 +1667,10 @@ void ieee80211_xmit(struct ieee80211_sub
- 		}
- 	}
- 
--	ieee80211_set_qos_hdr(sdata, skb);
-+        // Don't overwrite QoS header in monitor mode
-+        if (likely(info->control.vif->type != NL80211_IFTYPE_MONITOR)) {
-+            ieee80211_set_qos_hdr(sdata, skb);
-+        }
- 	ieee80211_tx(sdata, sta, skb, false);
- }
- 
---- a/net/wireless/chan.c
-+++ b/net/wireless/chan.c
-@@ -857,8 +857,10 @@ int cfg80211_set_monitor_channel(struct
- {
- 	if (!rdev->ops->set_monitor_channel)
- 		return -EOPNOTSUPP;
--	if (!cfg80211_has_monitors_only(rdev))
--		return -EBUSY;
-+	// Always allow user to change channel, even if there is another normal
-+	// virtual interface using the device.
-+	//if (!cfg80211_has_monitors_only(rdev))
-+	//	return -EBUSY;
- 
- 	return rdev_set_monitor_channel(rdev, chandef);
- }
---- a/drivers/net/wireless/zydas/zd1211rw/zd_mac.c
-+++ b/drivers/net/wireless/zydas/zd1211rw/zd_mac.c
-@@ -242,14 +242,19 @@ void zd_mac_clear(struct zd_mac *mac)
- static int set_rx_filter(struct zd_mac *mac)
- {
- 	unsigned long flags;
--	u32 filter = STA_RX_FILTER;
-+	struct zd_ioreq32 ioreqs[] = {
-+		{CR_RX_FILTER, STA_RX_FILTER},
-+		{ CR_SNIFFER_ON, 0U },
-+	};
- 
- 	spin_lock_irqsave(&mac->lock, flags);
--	if (mac->pass_ctrl)
--		filter |= RX_FILTER_CTRL;
-+	if (mac->pass_ctrl) {
-+		ioreqs[0].value |= 0xFFFFFFFF;
-+		ioreqs[1].value = 0x1;
-+	}
- 	spin_unlock_irqrestore(&mac->lock, flags);
- 
--	return zd_iowrite32(&mac->chip, CR_RX_FILTER, filter);
-+	return zd_iowrite32a(&mac->chip, ioreqs, ARRAY_SIZE(ioreqs));
- }
- 
- static int set_mac_and_bssid(struct zd_mac *mac)
-@@ -1057,7 +1062,8 @@ int zd_mac_rx(struct ieee80211_hw *hw, c
- 	/* Caller has to ensure that length >= sizeof(struct rx_status). */
- 	status = (struct rx_status *)
- 		(buffer + (length - sizeof(struct rx_status)));
--	if (status->frame_status & ZD_RX_ERROR) {
-+	if ((status->frame_status & ZD_RX_ERROR) || 
-+		(status->frame_status & ~0x21)) {
- 		if (mac->pass_failed_fcs &&
- 				(status->frame_status & ZD_RX_CRC32_ERROR)) {
- 			stats.flag |= RX_FLAG_FAILED_FCS_CRC;
-@@ -1400,7 +1406,7 @@ struct ieee80211_hw *zd_mac_alloc_hw(str
- 	ieee80211_hw_set(hw, MFP_CAPABLE);
- 	ieee80211_hw_set(hw, HOST_BROADCAST_PS_BUFFERING);
- 	ieee80211_hw_set(hw, RX_INCLUDES_FCS);
--	ieee80211_hw_set(hw, SIGNAL_UNSPEC);
-+	ieee80211_hw_set(hw, SIGNAL_DBM);
- 
- 	hw->wiphy->interface_modes =
- 		BIT(NL80211_IFTYPE_MESH_POINT) |
---- a/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
-+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
-@@ -251,8 +251,17 @@ static void rtl8187_tx(struct ieee80211_
- 	flags |= RTL818X_TX_DESC_FLAG_NO_ENC;
- 
- 	flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24;
-+
-+	// When this flag is set the firmware waits untill ALL fragments have
-+	// reached the USB device. Then it sends the first fragment and waits
-+	// for ACKS's. Of course in monitor mode it won't detect these ACK's.
- 	if (ieee80211_has_morefrags(tx_hdr->frame_control))
--		flags |= RTL818X_TX_DESC_FLAG_MOREFRAG;
-+	{
-+		// If info->control.vif is NULL it's most likely in monitor mode
-+		if (likely(info->control.vif != NULL && info->control.vif->type != NL80211_IFTYPE_MONITOR)) {
-+			flags |= RTL818X_TX_DESC_FLAG_MOREFRAG;
-+		}
-+	}
- 
- 	/* HW will perform RTS-CTS when only RTS flags is set.
- 	 * HW will perform CTS-to-self when both RTS and CTS flags are set.