nverter0_grid_rating_current Unknown

[ayubn]

i hv a voltronic based solar inverter and i am using the following code . i got all values but unable to read grid_rating_current

Enable time component to reset energy at midnight

https://esphome.io/components/time.html#home-assistant-time-source

uart:

• id: uart_0
  baud_rate: 2400
  tx_pin: ${tx_pin}
  rx_pin: ${rx_pin}
  debug:
  direction: BOTH

  dummy_receiver: false

  after:

  delimiter: "\r"

  sequence:

  - lambda: UARTDebug::log_string(direction, bytes);

pipsolar:
uart_id: uart_0
id: inverter0

sensor:

• platform: pipsolar
  pipsolar_id: inverter0

  QPIRI

grid_rating_voltage:

name: "${name} grid_rating_voltage"

grid_rating_current:

name: "${name} grid_current"

ac_output_rating_voltage:

name: "${name} ac_output_rating_voltage"

ac_output_rating_frequency:

name: "${name} ac_output_rating_frequency"

ac_output_rating_current:

name: "${name} ac_output_rating_current"

ac_output_rating_apparent_power:

name: "${name} ac_output_rating_apparent_power"

ac_output_rating_active_power:

name: "${name} ac_output_rating_active_power"

battery_rating_voltage:

name: "${name} battery_rating_voltage"

battery_recharge_voltage:

name: "${name} battery_recharge_voltage"

battery_under_voltage:

name: "${name} battery_under_voltage"

battery_bulk_voltage:

name: "${name} battery_bulk_voltage"

battery_float_voltage:

name: "${name} battery_float_voltage"

battery_type:

name: "${name} battery_type"

current_max_ac_charging_current:

name: "${name} current_max_ac_charging_current"

current_max_charging_current:

name: "${name} current_max_charging_current"

input_voltage_range:

name: "${name} input_voltage_range"

output_source_priority:

name: "${name} output_source_priority"

charger_source_priority:

name: "${name} charger_source_priority"

parallel_max_num:

name: "${name} parallel_max_num"

machine_type:

name: "${name} machine_type"

topology:

name: "${name} topology"

output_mode:

name: "${name} output_mode"

battery_redischarge_voltage:

name: "${name} battery_redischarge_voltage"

pv_ok_condition_for_parallel:

name: "${name} pv_ok_condition_for_parallel"

pv_power_balance:

name: "${name} pv_power_balance"

# QPIGS

grid_voltage:

name: "${name} grid_voltage"

grid_frequency:

name: "${name} grid_frequency"

grid_rating_voltage:
  id: inverter0_grid_rating_voltage
  name: inverter0_grid_rating_voltage
grid_rating_current:
  id: inverter0_grid_rating_current
  name: inverter0_grid_rating_current
grid_voltage:
  id: inverter0_grid_voltage
  name: inverter0_grid_voltage
grid_frequency:
  id: inverter0_grid_frequency
  name: inverter0_grid_frequency

input_voltage_range:
  name: "input_voltage_range"
ac_output_voltage:
  name: "${name} ac_output_voltage"
ac_output_frequency:
  name: "${name} ac_output_frequency"
ac_output_apparent_power:
  name: "${name} ac_output_apparent_power"
ac_output_active_power:
  name: "${name} ac_output_active_power"
output_load_percent:
  name: "${name} output_load_percent"
bus_voltage:
  name: "${name} bus_voltage"
battery_voltage:
  name: "${name} battery_voltage"
battery_charging_current:
  name: "${name} battery_charging_current"
battery_capacity_percent:
  name: "${name} battery_capacity_percent"
inverter_heat_sink_temperature:
  name: "${name} inverter_heat_sink_temperature"
pv_input_current_for_battery:
  name: "${name} pv_input_current_for_battery"
pv_input_voltage:
  name: "${name} pv_input_voltage"
battery_voltage_scc:
  name: "${name} battery_voltage_scc"
battery_discharge_current:
  name: "${name} battery_discharge_current"
battery_voltage_offset_for_fans_on:
  name: "${name} battery_voltage_offset_for_fans_on"
eeprom_version:
  name: "${name} eeprom_version"
pv_charging_power:
  name: "${name} pv_charging_power"

text_sensor:

• platform: pipsolar
  pipsolar_id: inverter0
  device_mode:
  name: "${name} device_mode"
  last_qpigs:
  name: "${name} last_qpigs"
  last_qpiri:
  name: "${name} last_qpiri"
  last_qmod:
  name: "${name} last_qmod"
  last_qflag:
  name: "${name} last_qflag"

binary_sensor:

• platform: pipsolar
  pipsolar_id: inverter0
  add_sbu_priority_version:
  name: "${name} add_sbu_priority_version"
  configuration_status:
  name: "${name} configuration_status"

scc_firmware_version:

name: "${name} scc_firmware_version"

load_status:
  name: "${name} load_status"
battery_voltage_to_steady_while_charging:
  name: "${name} battery_voltage_to_steady_while_charging"
charging_status:
  name: "${name} charging_status"
scc_charging_status:
  name: "${name} scc_charging_status"
ac_charging_status:
  name: "${name} ac_charging_status"
charging_to_floating_mode:
  name: "${name} charging_to_floating_mode"
switch_on:
  name: "${name} switch_on"

dustproof_installed:

name: "${name} dustproof_installed"

silence_buzzer_open_buzzer:
  name: "${name} silence_buzzer_open_buzzer"
overload_bypass_function:
  name: "${name} overload_bypass_function"
lcd_escape_to_default:
  name: "${name} lcd_escape_to_default"
overload_restart_function:
  name: "${name} overload_restart_function"
over_temperature_restart_function:
  name: "${name} over_temperature_restart_function"

backlight_on:

name: "${name} backlight_on"

switch:

• platform: pipsolar
  pipsolar_id: inverter0
  output_source_priority_utility:
  name: "${name} output_source_priority_utility"
  output_source_priority_solar:
  name: "${name} output_source_priority_solar"
  output_source_priority_battery:
  name: "${name} output_source_priority_battery"
  input_voltage_range:
  name: "${name} input_voltage_range"
  pv_ok_condition_for_parallel:
  name: "${name} pv_ok_condition_for_parallel"
  pv_power_balance:
  name: "${name} pv_power_balance"

output:

• platform: pipsolar
  pipsolar_id: inverter0
  battery_recharge_voltage:
  id: inverter0_battery_recharge_voltage_out

  i got all values but got error on

  inverter0_grid_rating_current
  Unavailable
  inverter0_grid_rating_voltage
  Unavailable