Wifi trouble

[FireFly3390]

Hi community,

thanks for this awesome tool. I want to use it to send data from my B2A20S20P to ioBroker via mqtt.
Here's my yaml:

substitutions:
  name: jk-bms
  device_description: "Monitor and control a JK-BMS via bluetooth"
  external_components_source: github://syssi/esphome-jk-bms@main
  mac_address: [redacted]
  # Please use "JK02_24S" if you own a old JK-BMS < hardware version 11.0 (hardware version >= 6.0 and < 11.0)
  # Please use "JK02_32S" if you own a new JK-BMS >= hardware version 11.0 (f.e. JK-B2A8S20P hw 11.XW, sw 11.26)
  # Please use "JK04" if you have some old JK-BMS <= hardware version 3.0 (f.e. JK-B2A16S hw 3.0, sw. 3.3.0)
  protocol_version: JK02_32S

esphome:
  name: ${name}
  comment: ${device_description}
  min_version: 2024.6.0
  project:
    name: "syssi.esphome-jk-bms"
    version: 2.1.0

esp32:
  board: esp32doit-devkit-v1
  framework:
    type: arduino

external_components:
  - source: ${external_components_source}
    refresh: 0s

wifi:
  ssid: "HanfNET-Satellite1"
  password: "[redacted]"

ota:
  platform: esphome
  on_begin:
    then:
      - switch.turn_off: ble_client_switch0
      - logger.log: "BLE connection suspended for OTA update"

logger:
  level: DEBUG
  logs:
    esp32_ble_tracker: INFO
    esp32_ble_client: INFO

# If you don't use Home Assistant please remove this `api` section and uncomment the `mqtt` component!
# api:

mqtt:
   broker: 192.168.188.65
#   username: !secret mqtt_username
#   password: !secret mqtt_password
   id: mqtt_client
   discovery: false

esp32_ble_tracker:
  scan_parameters:
    active: false
  on_ble_advertise:
    then:
      - lambda: |-
          if (x.get_name().rfind("JK-", 0) == 0 || x.get_name().rfind("JK_", 0) == 0) {
            ESP_LOGI("ble_adv", "New JK-BMS found");
            ESP_LOGI("ble_adv", "  Name: %s", x.get_name().c_str());
            ESP_LOGI("ble_adv", "  MAC address: %s", x.address_str().c_str());
            ESP_LOGD("ble_adv", "  Advertised service UUIDs:");
            for (auto uuid : x.get_service_uuids()) {
              ESP_LOGD("ble_adv", "    - %s", uuid.to_string().c_str());
            }
          }

ble_client:
  - mac_address: ${mac_address}
    id: client0

jk_bms_ble:
  - ble_client_id: client0
    protocol_version: ${protocol_version}
    throttle: 5s
    id: bms0

binary_sensor:
  - platform: jk_bms_ble
    balancing:
      name: "${name} balancing"
    charging:
      name: "${name} charging"
    discharging:
      name: "${name} discharging"
    heating:
      name: "${name} heating"
    online_status:
      name: "${name} online status"

button:
  - platform: jk_bms_ble
    retrieve_settings:
      name: "${name} retrieve settings"
    retrieve_device_info:
      name: "${name} retrieve device info"

number:
  - platform: jk_bms_ble
    jk_bms_ble_id: bms0
    # balance_trigger_voltage:
      # name: "${name} balance trigger voltage"
    cell_count:
      name: "${name} cell count"
    total_battery_capacity:
      name: "${name} total battery capacity"
    # cell_voltage_overvoltage_protection:
      # name: "${name} cell voltage overvoltage protection"
    # cell_voltage_overvoltage_recovery:
      # name: "${name} cell voltage overvoltage recovery"
    # cell_voltage_undervoltage_protection:
      # name: "${name} cell voltage undervoltage protection"
    # cell_voltage_undervoltage_recovery:
      # name: "${name} cell voltage undervoltage recovery"
    # balance_starting_voltage:
      # name: "${name} balance starting voltage"
    # voltage_calibration:
      # name: "${name} voltage calibration"
    # current_calibration:
      # name: "${name} current calibration"
    # power_off_voltage:
      # name: "${name} power off voltage"
    # max_balance_current:
      # name: "${name} max balance current"
    max_charge_current:
      name: "${name} max charge current"
    # max_discharge_current:
      # name: "${name} max discharge current"
    # charge_overcurrent_protection_delay:
      # name: "${name} charge overcurrent protection delay"
    # charge_overcurrent_protection_recovery_time:
      # name: "${name} charge overcurrent protection recovery time"
    # discharge_overcurrent_protection_delay:
      # name: "${name} discharge overcurrent protection delay"
    # discharge_overcurrent_protection_recovery_time:
      # name: "${name} discharge overcurrent protection recovery time"
    # short_circuit_protection_delay:
      # name: "${name} short circuit protection delay"
    # short_circuit_protection_recovery_time:
      # name: "${name} short circuit protection recovery time"
    # charge_overtemperature_protection:
      # name: "${name} charge overtemperature protection"
    # charge_overtemperature_protection_recovery:
      # name: "${name} charge overtemperature protection recovery"
    # discharge_overtemperature_protection:
      # name: "${name} discharge overtemperature protection"
    # discharge_overtemperature_protection_recovery:
      # name: "${name} discharge overtemperature protection recovery"
    # charge_undertemperature_protection:
      # name: "${name} charge undertemperature protection"
    # charge_undertemperature_protection_recovery:
      # name: "${name} charge undertemperature protection recovery"
    # power_tube_overtemperature_protection:
      # name: "${name} power tube overtemperature protection"
    # power_tube_overtemperature_protection_recovery:
      # name: "${name} power tube overtemperature protection recovery"

sensor:
  - platform: jk_bms_ble
    jk_bms_ble_id: bms0
    min_cell_voltage:
      name: "${name} min cell voltage"
    max_cell_voltage:
      name: "${name} max cell voltage"
    min_voltage_cell:
      name: "${name} min voltage cell"
    max_voltage_cell:
      name: "${name} max voltage cell"
    delta_cell_voltage:
      name: "${name} delta cell voltage"
    # average_cell_voltage:
      # name: "${name} average cell voltage"
    cell_voltage_1:
      name: "${name} cell voltage 1"
    cell_voltage_2:
      name: "${name} cell voltage 2"
    cell_voltage_3:
      name: "${name} cell voltage 3"
    cell_voltage_4:
      name: "${name} cell voltage 4"
    cell_voltage_5:
      name: "${name} cell voltage 5"
    cell_voltage_6:
      name: "${name} cell voltage 6"
    cell_voltage_7:
      name: "${name} cell voltage 7"
    cell_voltage_8:
      name: "${name} cell voltage 8"
    cell_voltage_9:
      name: "${name} cell voltage 9"
    cell_voltage_10:
      name: "${name} cell voltage 10"
    cell_voltage_11:
      name: "${name} cell voltage 11"
    cell_voltage_12:
      name: "${name} cell voltage 12"
    cell_voltage_13:
      name: "${name} cell voltage 13"
    cell_voltage_14:
      name: "${name} cell voltage 14"
    cell_voltage_15:
      name: "${name} cell voltage 15"
    cell_voltage_16:
      name: "${name} cell voltage 16"
    # cell_voltage_17:
      # name: "${name} cell voltage 17"
    # cell_voltage_18:
      # name: "${name} cell voltage 18"
    # cell_voltage_19:
      # name: "${name} cell voltage 19"
    # cell_voltage_20:
      # name: "${name} cell voltage 20"
    # cell_voltage_21:
      # name: "${name} cell voltage 21"
    # cell_voltage_22:
      # name: "${name} cell voltage 22"
    # cell_voltage_23:
      # name: "${name} cell voltage 23"
    # cell_voltage_24:
      # name: "${name} cell voltage 24"
    # cell_resistance_1:
      # name: "${name} cell resistance 1"
    # cell_resistance_2:
      # name: "${name} cell resistance 2"
    # cell_resistance_3:
      # name: "${name} cell resistance 3"
    # cell_resistance_4:
      # name: "${name} cell resistance 4"
    # cell_resistance_5:
      # name: "${name} cell resistance 5"
    # cell_resistance_6:
      # name: "${name} cell resistance 6"
    # cell_resistance_7:
      # name: "${name} cell resistance 7"
    # cell_resistance_8:
      # name: "${name} cell resistance 8"
    # cell_resistance_9:
      # name: "${name} cell resistance 9"
    # cell_resistance_10:
      # name: "${name} cell resistance 10"
    # cell_resistance_11:
      # name: "${name} cell resistance 11"
    # cell_resistance_12:
      # name: "${name} cell resistance 12"
    # cell_resistance_13:
      # name: "${name} cell resistance 13"
    # cell_resistance_14:
      # name: "${name} cell resistance 14"
    # cell_resistance_15:
      # name: "${name} cell resistance 15"
    # cell_resistance_16:
      # name: "${name} cell resistance 16"
    # cell_resistance_17:
      # name: "${name} cell resistance 17"
    # cell_resistance_18:
      # name: "${name} cell resistance 18"
    # cell_resistance_19:
      # name: "${name} cell resistance 19"
    # cell_resistance_20:
      # name: "${name} cell resistance 20"
    # cell_resistance_21:
      # name: "${name} cell resistance 21"
    # cell_resistance_22:
      # name: "${name} cell resistance 22"
    # cell_resistance_23:
      # name: "${name} cell resistance 23"
    # cell_resistance_24:
      # name: "${name} cell resistance 24"
    total_voltage:
      name: "${name} total voltage"
    current:
      name: "${name} current"
    # heating_current:
      # name: "${name} heating current"
    power:
      name: "${name} power"
    charging_power:
      name: "${name} charging power"
    discharging_power:
      name: "${name} discharging power"
    temperature_sensor_1:
      name: "${name} temperature sensor 1"
    temperature_sensor_2:
      name: "${name} temperature sensor 2"
    # temperature_sensor_3:
    #   name: "${name} temperature sensor 3"
    # temperature_sensor_4:
    #   name: "${name} temperature sensor 4"
    power_tube_temperature:
      name: "${name} power tube temperature"
    balancing:
      name: "${name} balancing"
    state_of_charge:
          name: "${name} state of charge"
    capacity_remaining:
      name: "${name} capacity remaining"
    total_battery_capacity_setting:
      name: "${name} total battery capacity setting"
    charging_cycles:
      name: "${name} charging cycles"
    total_charging_cycle_capacity:
      name: "${name} total charging cycle capacity"
    total_runtime:
      name: "${name} total runtime"
    balancing_current:
      name: "${name} balancing current"
    errors_bitmask:
      name: "${name} errors bitmask"

switch:
  - platform: jk_bms_ble
    charging:
      name: "${name} charging"
    discharging:
      name: "${name} discharging"
    balancer:
      name: "${name} balancer"

  - platform: ble_client
    ble_client_id: client0
    id: ble_client_switch0
    name: "${name} enable bluetooth connection"

text_sensor:
  - platform: jk_bms_ble
    errors:
      name: "${name} errors"
    total_runtime_formatted:
      name: "${name} total runtime formatted"

For some reasons, the wifi connection just doesn't want to work propperly (log below). Sometimes it connects for a short period, but most of the time it just fails with 'Authentication Failed'. Also there a lots of reboots that seems to occur when working on wifi stuff.
I have several other ESP32 on the same network and they never had an issue connecting to this SSID. Also I tried 3 different boards with the above yaml compiled to rule out any HW issue. So for me this sounds like a SW issue... any ideas?

[17:17:57][I][logger:156]: Log initialized
[17:17:57][C][safe_mode:079]: There have been 3 suspected unsuccessful boot attempts
[17:17:57][D][esp32.preferences:114]: Saving 1 preferences to flash...
[17:17:57][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed
[17:17:57][I][app:029]: Running through setup()...
[17:17:57][C][esp32_ble:032]: Setting up BLE...
[17:17:57][C][wifi:048]: Setting up WiFi...
[17:17:57][C][wifi:061]: Starting WiFi...
[17:17:57][C][wifi:062]:   Local MAC: B0:A7:32:82:19:D4
[17:17:57][D][wifi:482]: Starting scan...
[17:17:57][W][jk_bms_ble:240]: [C8:47:80:13:A3:24] Not connected
[17:17:57][W][component:157]: Component wifi set Warning flag: scanning for networks
[17:17:57][D][esp32_ble:284]: Enabling BLE...
[17:17:57][I][esp32_ble_client:067]: [0] [C8:47:80:13:A3:24] 0x00 Attempting BLE connection
[17:17:58][I][esp32_ble_client:227]: [0] [C8:47:80:13:A3:24] Connected
[17:17:58][D][switch:055]: 'jk-bms enable bluetooth connection': Sending state ON
[17:17:58][I][jk_bms_ble:216]: Request device info
[17:17:58][D][jk_bms_ble:1463]: Write register: AA.55.90.EB.97.00.00.00.00.00.00.00.00.00.00.00.00.00.00.11 (20)
[17:17:58][D][ble_client:058]: All clients established, services released
[17:17:59][D][wifi:497]: Found networks:
[17:17:59][I][wifi:541]: - 'HanfNET-Satellite1' (0C:72:74:E5:43:69) [redacted]▂▄▆█
[17:17:59][D][wifi:542]:     Channel: 1
[17:17:59][D][wifi:543]:     RSSI: -45 dB
[17:17:59][I][wifi:313]: WiFi Connecting to 'HanfNET-Satellite1'...
[17:17:59][D][binary_sensor:036]: 'jk-bms online status': Sending state ON
[17:17:59][I][jk_bms_ble:1171]: Device info frame (300 bytes) received
[17:17:59][I][jk_bms_ble:1245]:   Vendor ID: JK_B2A20S20P
[17:17:59][I][jk_bms_ble:1248]:   Hardware version: 11.XA
[17:17:59][I][jk_bms_ble:1251]:   Software version: 11.48
[17:17:59][I][jk_bms_ble:1254]:   Uptime: 13500 s
[17:17:59][I][jk_bms_ble:1257]:   Power on count: 10
[17:17:59][I][jk_bms_ble:1260]:   Device name: JK_B2A20S20P
[17:17:59][I][jk_bms_ble:1263]:   Device passcode: 1234
[17:17:59][I][jk_bms_ble:1266]:   Manufacturing date: 240831
[17:17:59][I][jk_bms_ble:1269]:   Serial number: 403292D0165
[17:17:59][I][jk_bms_ble:1272]:   Passcode: 
[17:17:59][I][jk_bms_ble:1275]:   User data: Input Userdata
[17:17:59][I][jk_bms_ble:1278]:   Setup passcode: [redacted]
[17:17:59][I][jk_bms_ble:1334]:   UART1 Protocol: 0
[17:17:59][I][jk_bms_ble:1336]:   CAN Protocol: 0
[17:17:59][I][jk_bms_ble:1370]:   UART2 Protocol: 0
[17:17:59][I][jk_bms_ble:1399]:   RCV Time: 0.0 h
[17:17:59][I][jk_bms_ble:1403]:   RFV Time: 0.0 h
[17:17:59][I][wifi:617]: WiFi Connected!
[17:17:59][C][wifi:428]:   Local MAC: B0:A7:32:82:19:D4
[17:17:59][C][wifi:433]:   SSID: 'HanfNET-Satellite1'[redacted]
[17:17:59][C][wifi:436]:   IP Address: 192.168.188.35
[17:17:59][C][wifi:440]:   BSSID: 0C:72:74:E5:43:69[redacted]
[17:17:59][C][wifi:441]:   Hostname: 'jk-bms'
[17:17:59][C][wifi:443]:   Signal strength: -47 dB ▂▄▆█
[17:17:59][C][wifi:447]:   Channel: 1
[17:17:59][C][wifi:448]:   Subnet: 255.255.255.0
[17:17:59][C][wifi:449]:   Gateway: 192.168.188.1
[17:18:00][C][wifi:450]:   DNS1: 192.168.188.49
[17:18:00][C][wifi:451]:   DNS2: 0.0.0.0
[17:18:00][C][mqtt:037]: Setting up MQTT...
[17:18:00][W][component:157]: Component mqtt set Warning flag: unspecified
[17:18:00][I][mqtt:244]: Connecting to MQTT...
[17:18:00][W][component:170]: Component wifi cleared Warning flag
[17:18:00][W][component:170]: Component mqtt cleared Warning flag
[17:18:00][I][mqtt:284]: MQTT Connected!
[17:18:00][I][app:062]: setup() finished successfully!
[17:18:00][I][app:100]: ESPHome version 2024.8.3 compiled on Sep  5 2024, 18:12:26
[17:18:00][I][app:102]: Project syssi.esphome-jk-bms version 2.1.0
[17:18:00][C][wifi:600]: WiFi:
[17:18:00][C][wifi:428]:   Local MAC: B0:A7:32:82:19:D4
[17:18:00][C][wifi:433]:   SSID: 'HanfNET-Satellite1'[redacted]
[17:18:00][C][wifi:436]:   IP Address: 192.168.188.35
[17:18:00][C][wifi:440]:   BSSID: 0C:72:74:E5:43:69[redacted]
[17:18:00][C][wifi:441]:   Hostname: 'jk-bms'
[17:18:00][C][wifi:443]:   Signal strength: -47 dB ▂▄▆█
[17:18:00][C][wifi:447]:   Channel: 1
[17:18:00][C][wifi:448]:   Subnet: 255.255.255.0
[17:18:00][C][wifi:449]:   Gateway: 192.168.188.1
[17:18:00][C][wifi:450]:   DNS1: 192.168.188.49
[17:18:05]
[17:18:05]abort() was called at PC 0x401ffba7 on core 0
[17:18:05]
[17:18:05]
[17:18:05]Backtrace:0x400836fd:0x3ffe7bb00x400930ad:0x3ffe7bd0 0x40098525:0x3ffe7bf0 0x401ffba7:0x3ffe7c70 0x401ffbee:0x3ffe7c90 0x401ffb4f:0x3ffe7cb0 0x401fe81e:0x3ffe7cd0 0x400d46f5:0x3ffe7cf0 0x4012153d:0x3ffe7d10 0x401487ed:0x3ffe7d30 0x4014a663:0x3ffe7d50 
[17:18:05]
[17:18:05]
[17:18:05]
[17:18:05]
[17:18:05]ELF file SHA256: 0000000000000000
[17:18:05]
[17:18:05]Rebooting...
[17:18:05]ets Jul 29 2019 12:21:46
[17:18:05]
[17:18:05]rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
[17:18:05]configsip: 0, SPIWP:0xee
[17:18:05]clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
[17:18:05]mode:DIO, clock div:2
[17:18:05]load:0x3fff0030,len:1184
[17:18:05]load:0x40078000,len:13132
[17:18:05]load:0x40080400,len:3036
[17:18:05]entry 0x400805e4
[17:18:05][I][logger:156]: Log initialized
[17:18:05][C][safe_mode:079]: There have been 4 suspected unsuccessful boot attempts
[17:18:05][D][esp32.preferences:114]: Saving 1 preferences to flash...
[17:18:05][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed
[17:18:05][I][app:029]: Running through setup()...
[17:18:05][C][esp32_ble:032]: Setting up BLE...
[17:18:05][C][wifi:048]: Setting up WiFi...
[17:18:06][C][wifi:061]: Starting WiFi...
[17:18:06][C][wifi:062]:   Local MAC: B0:A7:32:82:19:D4
[17:18:06][D][wifi:482]: Starting scan...
[17:18:06][W][jk_bms_ble:240]: [C8:47:80:13:A3:24] Not connected
[17:18:06][W][component:157]: Component wifi set Warning flag: scanning for networks
[17:18:06][D][esp32_ble:284]: Enabling BLE...
[17:18:09][D][wifi:497]: Found networks:
[17:18:09][I][wifi:541]: - 'HanfNET-Satellite1' (0C:72:74:E5:43:69) [redacted]▂▄▆█
[17:18:09][D][wifi:542]:     Channel: 1
[17:18:09][D][wifi:543]:     RSSI: -47 dB
[17:18:09][I][wifi:313]: WiFi Connecting to 'HanfNET-Satellite1'...
[17:18:09][W][jk_bms_ble:240]: [C8:47:80:13:A3:24] Not connected
[17:18:09][W][wifi_esp32:532][arduino_events]: Event: Disconnected ssid='HanfNET-Satellite1' bssid=0C:72:74:E5:43:69[redacted] reason='Authentication Failed'
[17:18:09][W][wifi:674]: WiFi Unknown connection status 0
[17:18:09][I][wifi:313]: WiFi Connecting to 'HanfNET-Satellite1'...
[17:18:09][W][wifi_esp32:532][arduino_events]: Event: Disconnected ssid='HanfNET-Satellite1' bssid=0C:72:74:E5:43:69[redacted] reason='Association Failed'
[17:18:09][D][wifi:697]: Retrying with hidden networks...
[17:18:13][I][esp32_ble_client:067]: [0] [C8:47:80:13:A3:24] 0x00 Attempting BLE connection
[17:18:14][W][jk_bms_ble:240]: [C8:47:80:13:A3:24] Not connected
[17:18:14][I][esp32_ble_client:227]: [0] [C8:47:80:13:A3:24] Connected
[17:18:14][D][switch:055]: 'jk-bms enable bluetooth connection': Sending state ON
[17:18:14][I][jk_bms_ble:216]: Request device info
[17:18:14][D][jk_bms_ble:1463]: Write register: AA.55.90.EB.97.00.00.00.00.00.00.00.00.00.00.00.00.00.00.11 (20)
[17:18:14][D][ble_client:058]: All clients established, services released
[17:18:14][D][binary_sensor:036]: 'jk-bms online status': Sending state ON
[17:18:14][I][jk_bms_ble:1171]: Device info frame (300 bytes) received
[17:18:14][I][jk_bms_ble:1245]:   Vendor ID: JK_B2A20S20P
[17:18:14][I][jk_bms_ble:1248]:   Hardware version: 11.XA
[17:18:14][I][jk_bms_ble:1251]:   Software version: 11.48
[17:18:14][I][jk_bms_ble:1254]:   Uptime: 13500 s
[17:18:14][I][jk_bms_ble:1257]:   Power on count: 10
[17:18:14][I][jk_bms_ble:1260]:   Device name: JK_B2A20S20P
[17:18:14][I][jk_bms_ble:1263]:   Device passcode: 1234
[17:18:14][I][jk_bms_ble:1266]:   Manufacturing date: 240831
[17:18:14][I][jk_bms_ble:1269]:   Serial number: 403292D0165
[17:18:14][I][jk_bms_ble:1272]:   Passcode: 
[17:18:14][I][jk_bms_ble:1275]:   User data: Input Userdata
[17:18:14][I][jk_bms_ble:1278]:   Setup passcode: [redacted]
[17:18:14][I][jk_bms_ble:1334]:   UART1 Protocol: 0
[17:18:14][I][jk_bms_ble:1336]:   CAN Protocol: 0
[17:18:14][I][jk_bms_ble:1370]:   UART2 Protocol: 0
[17:18:14][I][jk_bms_ble:1399]:   RCV Time: 0.0 h
[17:18:14][I][jk_bms_ble:1403]:   RFV Time: 0.0 h
[17:18:14][I][wifi:313]: WiFi Connecting to 'HanfNET-Satellite1'...
[17:18:14][W][wifi:669]: Connecting to WiFi network failed. Are the credentials wrong?
[17:18:14][I][wifi:313]: WiFi Connecting to 'HanfNET-Satellite1'...
[17:18:14][W][wifi:669]: Connecting to WiFi network failed. Are the credentials wrong?

[syssi]

Could you provide any details about your ESP32 module? Which ESP32 type exactly do you use? Is it a single or dual core version?

[FireFly3390]

Thanks for editing @syssi and the fast answer. Sorry for the mess, still new and trying to improve.
I'm using some generic devboards from china (see picture below).
When uploading, the command line tells me it's a ESP32-D0WD-V3 (revision v3.1), Dual Core with 4 MB.

[FireFly3390]

Found an old Wemos Lolin32 and Wifi works just fine on these. Still strange to me, because other software on the devices above also works fine (tested with WLED).
Anyway there are some bugs left as it seems. I reduced the yaml a bit so that less data is sent, but still the log says Component esp32_ble took a long time for an operation (591 ms). Also Can't convert '' to number! appears several times.
Could you give me a hint as to where they're coming from?
Further questions: is the BMS supposed to beep everytime data is requested via BLE?
log (shortend) below.

[19:10:14]ets Jun  8 2016 00:22:57
[19:10:15]
[19:10:15]rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
[19:10:15]configsip: 0, SPIWP:0xee
[19:10:15]clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
[19:10:15]mode:DIO, clock div:2
[19:10:15]load:0x3fff0030,len:1184
[19:10:15]load:0x40078000,len:13132
[19:10:15]load:0x40080400,len:3036
[19:10:15]entry 0x400805e4
[19:10:15][I][logger:156]: Log initialized
[19:10:15][C][safe_mode:079]: There have been 3 suspected unsuccessful boot attempts
[19:10:15][D][esp32.preferences:114]: Saving 1 preferences to flash...
[19:10:15][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed
[19:10:15][I][app:029]: Running through setup()...
[19:10:15][C][esp32_ble:032]: Setting up BLE...
[19:10:15][C][wifi:048]: Setting up WiFi...
[19:10:15][C][wifi:061]: Starting WiFi...
[19:10:15][C][wifi:062]:   Local MAC: 24:6F:28:A6:86:EC
[19:10:15][D][wifi:482]: Starting scan...
[19:10:15][W][jk_bms_ble:240]: [C8:47:80:13:A3:24] Not connected
[19:10:15][W][component:157]: Component wifi set Warning flag: scanning for networks
[19:10:15][D][esp32_ble:284]: Enabling BLE...
[19:10:17][D][wifi:497]: Found networks:
[19:10:17][I][wifi:541]: - 'HanfNET-Satellite1' (0C:72:74:E5:43:69) [redacted]▂▄▆█
[19:10:17][D][wifi:542]:     Channel: 1
[19:10:17][D][wifi:543]:     RSSI: -50 dB
[19:10:17][D][wifi:546]: - 'TP-LINK_A691B6'[redacted] (A4:2B:B0:A6:91:B6) [redacted]▂▄▆█
[19:10:17][D][wifi:546]: - 'WLAN1-FB82BA'[redacted] (CC:CE:1E:CA:F8:42) [redacted]▂▄▆█
[19:10:17][I][wifi:313]: WiFi Connecting to 'HanfNET-Satellite1'...
[19:10:18][I][wifi:617]: WiFi Connected!
[19:10:18][C][wifi:428]:   Local MAC: 24:6F:28:A6:86:EC
[19:10:18][C][wifi:433]:   SSID: 'HanfNET-Satellite1'[redacted]
[19:10:18][C][wifi:436]:   IP Address: 192.168.188.78
[19:10:18][C][wifi:440]:   BSSID: 0C:72:74:E5:43:69[redacted]
[19:10:18][C][wifi:441]:   Hostname: 'jk-bms'
[19:10:18][C][wifi:443]:   Signal strength: -42 dB ▂▄▆█
[19:10:18][C][wifi:447]:   Channel: 1
[19:10:18][C][wifi:448]:   Subnet: 255.255.255.0
[19:10:18][C][wifi:449]:   Gateway: 192.168.188.1
[19:10:18][C][wifi:450]:   DNS1: 192.168.188.49
[19:10:18][C][wifi:451]:   DNS2: 0.0.0.0
[19:10:18][C][mqtt:037]: Setting up MQTT...
[19:10:18][W][component:157]: Component mqtt set Warning flag: unspecified
[19:10:18][I][mqtt:244]: Connecting to MQTT...
[19:10:18][W][component:170]: Component wifi cleared Warning flag
[19:10:18][W][component:170]: Component mqtt cleared Warning flag
[19:10:18][I][mqtt:284]: MQTT Connected!
[19:10:18][I][app:062]: setup() finished successfully!
[19:10:18][I][app:100]: ESPHome version 2024.8.3 compiled on Sep  9 2024, 19:08:36
[19:10:18][I][app:102]: Project syssi.esphome-jk-bms version 2.1.0
[19:10:18][C][wifi:600]: WiFi:
[19:10:18][C][wifi:428]:   Local MAC: 24:6F:28:A6:86:EC
[19:10:18][C][wifi:433]:   SSID: 'HanfNET-Satellite1'[redacted]
[19:10:18][C][wifi:436]:   IP Address: 192.168.188.78
[19:10:18][C][wifi:440]:   BSSID: 0C:72:74:E5:43:69[redacted]
[19:10:18][C][wifi:441]:   Hostname: 'jk-bms'
[19:10:18][C][wifi:443]:   Signal strength: -40 dB ▂▄▆█
[19:10:18][C][wifi:447]:   Channel: 1
[19:10:18][C][wifi:448]:   Subnet: 255.255.255.0
[19:10:18][C][wifi:449]:   Gateway: 192.168.188.1
[19:10:18][C][wifi:450]:   DNS1: 192.168.188.49
[19:10:18][C][wifi:451]:   DNS2: 0.0.0.0
[19:10:18][C][logger:185]: Logger:
[19:10:18][C][logger:186]:   Level: DEBUG
[19:10:18][C][logger:188]:   Log Baud Rate: 115200
[19:10:18][C][logger:189]:   Hardware UART: UART0
[19:10:18][C][logger:193]:   Level for 'esp32_ble_tracker': INFO
[19:10:18][C][logger:193]:   Level for 'esp32_ble_client': INFO
[19:10:18][C][jk_bms_ble:055]: JkBmsBle
[19:10:18][C][jk_bms_ble:056]: Minimum Cell Voltage 'jk-bms min cell voltage'
[19:10:18][C][jk_bms_ble:056]:   Device Class: 'voltage'
[19:10:18][C][jk_bms_ble:056]:   State Class: 'measurement'
[19:10:18][C][jk_bms_ble:056]:   Unit of Measurement: 'V'
[19:10:18][C][jk_bms_ble:056]:   Accuracy Decimals: 3
[19:10:18][C][jk_bms_ble:057]: Maximum Cell Voltage 'jk-bms max cell voltage'
[19:10:18][C][jk_bms_ble:057]:   Device Class: 'voltage'
[19:10:18][C][jk_bms_ble:057]:   State Class: 'measurement'
[19:10:18][C][jk_bms_ble:057]:   Unit of Measurement: 'V'
[19:10:18][C][jk_bms_ble:057]:   Accuracy Decimals: 3
[19:10:18][C][jk_bms_ble:058]: Minimum Voltage Cell 'jk-bms min voltage cell'
[19:10:18][C][jk_bms_ble:058]:   State Class: 'measurement'
[19:10:18][C][jk_bms_ble:058]:   Unit of Measurement: ''
[19:10:18][C][jk_bms_ble:058]:   Accuracy Decimals: 0
[19:10:18][C][jk_bms_ble:058]:   Icon: 'mdi:battery-minus-outline'
[19:10:18][C][jk_bms_ble:059]: Maximum Voltage Cell 'jk-bms max voltage cell'
[19:10:18][C][jk_bms_ble:059]:   State Class: 'measurement'
[19:10:18][C][jk_bms_ble:059]:   Unit of Measurement: ''
[19:10:18][C][jk_bms_ble:059]:   Accuracy Decimals: 0
[19:10:18][C][jk_bms_ble:059]:   Icon: 'mdi:battery-plus-outline'
[19:10:18][C][jk_bms_ble:060]: Delta Cell Voltage 'jk-bms delta cell voltage'
[19:10:18][C][jk_bms_ble:060]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:060]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:060]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:060]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:062]: Cell Voltage 1 'jk-bms cell voltage 1'
[19:10:19][C][jk_bms_ble:062]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:062]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:062]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:062]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:063]: Cell Voltage 2 'jk-bms cell voltage 2'
[19:10:19][C][jk_bms_ble:063]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:063]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:063]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:063]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:064]: Cell Voltage 3 'jk-bms cell voltage 3'
[19:10:19][C][jk_bms_ble:064]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:064]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:064]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:064]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:065]: Cell Voltage 4 'jk-bms cell voltage 4'
[19:10:19][C][jk_bms_ble:065]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:065]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:065]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:065]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:066]: Cell Voltage 5 'jk-bms cell voltage 5'
[19:10:19][C][jk_bms_ble:066]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:066]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:066]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:066]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:067]: Cell Voltage 6 'jk-bms cell voltage 6'
[19:10:19][C][jk_bms_ble:067]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:067]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:067]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:067]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:068]: Cell Voltage 7 'jk-bms cell voltage 7'
[19:10:19][C][jk_bms_ble:068]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:068]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:068]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:068]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:069]: Cell Voltage 8 'jk-bms cell voltage 8'
[19:10:19][C][jk_bms_ble:069]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:069]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:069]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:069]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:070]: Cell Voltage 9 'jk-bms cell voltage 9'
[19:10:19][C][jk_bms_ble:070]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:070]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:070]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:070]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:071]: Cell Voltage 10 'jk-bms cell voltage 10'
[19:10:19][C][jk_bms_ble:071]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:071]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:071]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:071]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:072]: Cell Voltage 11 'jk-bms cell voltage 11'
[19:10:19][C][jk_bms_ble:072]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:072]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:072]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:072]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:073]: Cell Voltage 12 'jk-bms cell voltage 12'
[19:10:19][C][jk_bms_ble:073]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:073]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:073]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:073]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:074]: Cell Voltage 13 'jk-bms cell voltage 13'
[19:10:19][C][jk_bms_ble:074]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:074]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:074]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:074]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:075]: Cell Voltage 14 'jk-bms cell voltage 14'
[19:10:19][C][jk_bms_ble:075]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:075]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:075]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:075]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:076]: Cell Voltage 15 'jk-bms cell voltage 15'
[19:10:19][C][jk_bms_ble:076]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:076]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:076]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:076]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:077]: Cell Voltage 16 'jk-bms cell voltage 16'
[19:10:19][C][jk_bms_ble:077]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:077]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:077]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:077]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:110]: Total Voltage 'jk-bms total voltage'
[19:10:19][C][jk_bms_ble:110]:   Device Class: 'voltage'
[19:10:19][C][jk_bms_ble:110]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:110]:   Unit of Measurement: 'V'
[19:10:19][C][jk_bms_ble:110]:   Accuracy Decimals: 2
[19:10:19][C][jk_bms_ble:111]: Current 'jk-bms current'
[19:10:19][C][jk_bms_ble:111]:   Device Class: 'current'
[19:10:19][C][jk_bms_ble:111]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:111]:   Unit of Measurement: 'A'
[19:10:19][C][jk_bms_ble:111]:   Accuracy Decimals: 2
[19:10:19][C][jk_bms_ble:111]:   Icon: 'mdi:current-dc'
[19:10:19][C][jk_bms_ble:112]: Power 'jk-bms power'
[19:10:19][C][jk_bms_ble:112]:   Device Class: 'power'
[19:10:19][C][jk_bms_ble:112]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:112]:   Unit of Measurement: 'W'
[19:10:19][C][jk_bms_ble:112]:   Accuracy Decimals: 2
[19:10:19][C][jk_bms_ble:113]: Charging Power 'jk-bms charging power'
[19:10:19][C][jk_bms_ble:113]:   Device Class: 'power'
[19:10:19][C][jk_bms_ble:113]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:113]:   Unit of Measurement: 'W'
[19:10:19][C][jk_bms_ble:113]:   Accuracy Decimals: 2
[19:10:19][C][jk_bms_ble:114]: Discharging Power 'jk-bms discharging power'
[19:10:19][C][jk_bms_ble:114]:   Device Class: 'power'
[19:10:19][C][jk_bms_ble:114]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:114]:   Unit of Measurement: 'W'
[19:10:19][C][jk_bms_ble:114]:   Accuracy Decimals: 2
[19:10:19][C][jk_bms_ble:115]: Power Tube Temperature 'jk-bms power tube temperature'
[19:10:19][C][jk_bms_ble:115]:   Device Class: 'temperature'
[19:10:19][C][jk_bms_ble:115]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:115]:   Unit of Measurement: '°C'
[19:10:19][C][jk_bms_ble:115]:   Accuracy Decimals: 1
[19:10:19][C][jk_bms_ble:116]: Temperature Sensor 1 'jk-bms temperature sensor 1'
[19:10:19][C][jk_bms_ble:116]:   Device Class: 'temperature'
[19:10:19][C][jk_bms_ble:116]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:116]:   Unit of Measurement: '°C'
[19:10:19][C][jk_bms_ble:116]:   Accuracy Decimals: 1
[19:10:19][C][jk_bms_ble:117]: Temperature Sensor 2 'jk-bms temperature sensor 2'
[19:10:19][C][jk_bms_ble:117]:   Device Class: 'temperature'
[19:10:19][C][jk_bms_ble:117]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:117]:   Unit of Measurement: '°C'
[19:10:19][C][jk_bms_ble:117]:   Accuracy Decimals: 1
[19:10:19][C][jk_bms_ble:121]: Balacing 'jk-bms balancing'
[19:10:19][C][jk_bms_ble:121]:   Device Class: 'current'
[19:10:19][C][jk_bms_ble:121]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:121]:   Unit of Measurement: ''
[19:10:19][C][jk_bms_ble:121]:   Accuracy Decimals: 0
[19:10:19][C][jk_bms_ble:121]:   Icon: 'mdi:seesaw'
[19:10:19][C][jk_bms_ble:122]: State Of Charge 'jk-bms state of charge'
[19:10:19][C][jk_bms_ble:122]:   Device Class: 'battery'
[19:10:19][C][jk_bms_ble:122]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:122]:   Unit of Measurement: '%'
[19:10:19][C][jk_bms_ble:122]:   Accuracy Decimals: 0
[19:10:19][C][jk_bms_ble:123]: Capacity Remaining 'jk-bms capacity remaining'
[19:10:19][C][jk_bms_ble:123]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:123]:   Unit of Measurement: 'Ah'
[19:10:19][C][jk_bms_ble:123]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:123]:   Icon: 'mdi:battery-50'
[19:10:19][C][jk_bms_ble:124]: Total Battery Capacity Setting 'jk-bms total battery capacity setting'
[19:10:19][C][jk_bms_ble:124]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:124]:   Unit of Measurement: 'Ah'
[19:10:19][C][jk_bms_ble:124]:   Accuracy Decimals: 0
[19:10:19][C][jk_bms_ble:125]: Charging Cycles 'jk-bms charging cycles'
[19:10:19][C][jk_bms_ble:125]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:125]:   Unit of Measurement: ''
[19:10:19][C][jk_bms_ble:125]:   Accuracy Decimals: 0
[19:10:19][C][jk_bms_ble:125]:   Icon: 'mdi:battery-sync'
[19:10:19][C][jk_bms_ble:126]: Total Charging Cycle Capacity 'jk-bms total charging cycle capacity'
[19:10:19][C][jk_bms_ble:126]:   State Class: 'measurement'
[19:10:19][C][jk_bms_ble:126]:   Unit of Measurement: 'Ah'
[19:10:19][C][jk_bms_ble:126]:   Accuracy Decimals: 3
[19:10:19][C][jk_bms_ble:126]:   Icon: 'mdi:counter'
[19:10:19][C][jk_bms_ble:127]: Total Runtime 'jk-bms total runtime'
[19:10:19][C][jk_bms_ble:127]:   State Class: 'total_increasing'
[19:10:19][C][jk_bms_ble:127]:   Unit of Measurement: 's'
[19:10:19][C][jk_bms_ble:127]:   Accuracy Decimals: 0
[19:10:19][C][jk_bms_ble:127]:   Icon: 'mdi:timelapse'
[19:10:19][C][jk_bms_ble:130]: Total Runtime Formatted 'jk-bms total runtime formatted'
[19:10:19][C][jk_bms_ble:130]:   Icon: 'mdi:timelapse'
[19:10:19][C][jk_bms_ble:131]: Balancing 'jk-bms balancing'
[19:10:19][C][jk_bms_ble:133]: Charging 'jk-bms charging'
[19:10:19][C][jk_bms_ble:134]: Discharging 'jk-bms discharging'
[19:10:19][C][jk_bms_ble:135]: Heating 'jk-bms heating'
[19:10:19][W][jk_bms_ble:240]: [C8:47:80:13:A3:24] Not connected
[19:10:19][C][jk_bms_ble.button:010]: JkBmsBle Button 'jk-bms retrieve settings'
[19:10:19][C][jk_bms_ble.button:010]:   Icon: 'mdi:cog'
[19:10:19][C][jk_bms_ble.button:010]: JkBmsBle Button 'jk-bms retrieve device info'
[19:10:19][C][jk_bms_ble.button:010]:   Icon: 'mdi:information-variant'
[19:10:19][C][jk_bms_ble.number:009]: JkBmsBle Number 'jk-bms cell count'
[19:10:19][C][jk_bms_ble.number:009]: JkBmsBle Number 'jk-bms total battery capacity'
[19:10:19][C][jk_bms_ble.number:009]:   Unit of Measurement: 'Ah'
[19:10:19][C][jk_bms_ble.number:009]: JkBmsBle Number 'jk-bms max charge current'
[19:10:19][C][jk_bms_ble.number:009]:   Unit of Measurement: 'A'
[19:10:19][C][jk_bms_ble.switch:068]: JkBmsBle Switch 'jk-bms charging'
[19:10:20][C][jk_bms_ble.switch:070]:   Icon: 'mdi:battery-charging-50'
[19:10:20][C][jk_bms_ble.switch:091]:   Restore Mode: always OFF
[19:10:20][C][jk_bms_ble.switch:068]: JkBmsBle Switch 'jk-bms discharging'
[19:10:20][C][jk_bms_ble.switch:070]:   Icon: 'mdi:battery-charging-50'
[19:10:20][C][jk_bms_ble.switch:091]:   Restore Mode: always OFF
[19:10:20][C][jk_bms_ble.switch:068]: JkBmsBle Switch 'jk-bms balancer'
[19:10:20][C][jk_bms_ble.switch:070]:   Icon: 'mdi:seesaw'
[19:10:20][C][jk_bms_ble.switch:091]:   Restore Mode: always OFF
[19:10:20][C][ble_switch:068]: BLE Client Switch 'jk-bms enable bluetooth connection'
[19:10:20][C][ble_switch:070]:   Icon: 'mdi:bluetooth'
[19:10:20][C][ble_switch:091]:   Restore Mode: always OFF
[19:10:20][C][esp32_ble:391]: ESP32 BLE:
[19:10:20][C][esp32_ble:393]:   MAC address: 24:6F:28:A6:86:EE
[19:10:20][C][esp32_ble:394]:   IO Capability: none
[19:10:20][W][mqtt.button:023]: 'jk-bms retrieve settings': Received unknown status payload: 
[19:10:20][W][component:157]: Component mqtt set Warning flag: unspecified
[19:10:20][C][ble_client:027]: BLE Client:
[19:10:20][C][ble_client:028]:   Address: C8:47:80:13:A3:24
[19:10:20][C][ble_client:029]:   Auto-Connect: TRUE
[19:10:20][W][mqtt.button:023]: 'jk-bms retrieve device info': Received unknown status payload: 
[19:10:20][W][component:157]: Component mqtt set Warning flag: unspecified
[19:10:20][C][mdns:116]: mDNS:
[19:10:20][C][mdns:117]:   Hostname: jk-bms
[19:10:20][W][mqtt.number:022]: Can't convert '' to number!
[19:10:20][C][safe_mode:018]: Safe Mode:
[19:10:20][C][safe_mode:020]:   Boot considered successful after 60 seconds
[19:10:20][C][safe_mode:021]:   Invoke after 10 boot attempts
[19:10:20][C][safe_mode:023]:   Remain in safe mode for 300 seconds
[19:10:20][W][safe_mode:029]: Last reset occurred too quickly; safe mode will be invoked in 7 restarts
[19:10:20][W][mqtt.number:022]: Can't convert '' to number!
[19:10:20][C][mqtt:145]: MQTT:
[19:10:20][C][mqtt:147]:   Server Address: 192.168.188.65:1883 (192.168.188.65)
[19:10:20][C][mqtt:148]:   Username: ''[redacted]
[19:10:20][C][mqtt:149]:   Client ID: 'jk-bms-246f28a686ec'[redacted]
[19:10:20][C][mqtt:151]:   Discovery IP enabled
[19:10:20][C][mqtt:157]:   Topic Prefix: 'jk-bms'
[19:10:20][C][mqtt:159]:   Log Topic: 'jk-bms/debug'
[19:10:20][C][mqtt:162]:   Availability: 'jk-bms/status'
[19:10:20][W][mqtt.number:022]: Can't convert '' to number!
[19:10:20][C][esphome.ota:073]: Over-The-Air updates:
[19:10:20][C][esphome.ota:074]:   Address: jk-bms.local:3232
[19:10:20][C][esphome.ota:075]:   Version: 2
[19:10:20][W][mqtt.switch:032]: 'jk-bms charging': Received unknown status payload: 
[19:10:20][W][component:157]: Component mqtt set Warning flag: unspecified
[19:10:20][C][mqtt.binary_sensor:022]: MQTT Binary Sensor 'jk-bms charging':
[19:10:20][C][mqtt.binary_sensor:023]:   State Topic: 'jk-bms/binary_sensor/jk-bms_charging/state'
[19:10:20][W][mqtt.switch:032]: 'jk-bms discharging': Received unknown status payload: 
[19:10:20][W][component:157]: Component mqtt set Warning flag: unspecified
[19:10:20][C][mqtt.binary_sensor:022]: MQTT Binary Sensor 'jk-bms discharging':
[19:10:20][C][mqtt.binary_sensor:023]:   State Topic: 'jk-bms/binary_sensor/jk-bms_discharging/state'
[19:10:20][W][mqtt.switch:032]: 'jk-bms balancer': Received unknown status payload: 
[19:10:20][W][component:157]: Component mqtt set Warning flag: unspecified
[19:10:20][C][mqtt.binary_sensor:022]: MQTT Binary Sensor 'jk-bms balancing':
[19:10:20][C][mqtt.binary_sensor:023]:   State Topic: 'jk-bms/binary_sensor/jk-bms_balancing/state'
[19:10:20][W][mqtt.switch:032]: 'jk-bms enable bluetooth connection': Received unknown status payload: 
[19:10:20][W][component:157]: Component mqtt set Warning flag: unspecified
[19:10:20][C][mqtt.binary_sensor:022]: MQTT Binary Sensor 'jk-bms online status':
[19:10:20][C][mqtt.binary_sensor:023]:   State Topic: 'jk-bms/binary_sensor/jk-bms_online_status/state'
[19:10:20][C][mqtt.binary_sensor:022]: MQTT Binary Sensor 'jk-bms heating':
[19:10:20][C][mqtt.binary_sensor:023]:   State Topic: 'jk-bms/binary_sensor/jk-bms_heating/state'
[19:10:20][C][mqtt.button:029]: MQTT Button 'jk-bms retrieve settings': 
[19:10:20][C][mqtt.button:030]:   State Topic: 'jk-bms/button/jk-bms_retrieve_settings/state'
[19:10:20][C][mqtt.button:030]:   Command Topic: 'jk-bms/button/jk-bms_retrieve_settings/command'
[19:10:20][C][mqtt.button:029]: MQTT Button 'jk-bms retrieve device info': 
[19:10:20][C][mqtt.button:030]:   State Topic: 'jk-bms/button/jk-bms_retrieve_device_info/state'
[19:10:20][C][mqtt.button:030]:   Command Topic: 'jk-bms/button/jk-bms_retrieve_device_info/command'
[19:10:20][C][mqtt.number:033]: MQTT Number 'jk-bms cell count':
[19:10:20][C][mqtt.number:034]:   State Topic: 'jk-bms/number/jk-bms_cell_count/state'
[19:10:20][C][mqtt.number:033]: MQTT Number 'jk-bms total battery capacity':
[19:10:20][C][mqtt.number:034]:   State Topic: 'jk-bms/number/jk-bms_total_battery_capacity/state'
[19:10:20][C][mqtt.number:033]: MQTT Number 'jk-bms max charge current':
[19:10:20][C][mqtt.number:034]:   State Topic: 'jk-bms/number/jk-bms_max_charge_current/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 1':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_1/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 2':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_2/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 3':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_3/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 4':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_4/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 5':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_5/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 6':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_6/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 7':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_7/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 8':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_8/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 9':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_9/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 10':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_10/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 11':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_11/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 12':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_12/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 13':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_13/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 14':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_14/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 15':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_15/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms cell voltage 16':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_cell_voltage_16/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms temperature sensor 1':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_temperature_sensor_1/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms temperature sensor 2':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_temperature_sensor_2/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms balancing':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_balancing/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms min cell voltage':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_min_cell_voltage/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms max cell voltage':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_max_cell_voltage/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms min voltage cell':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_min_voltage_cell/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms max voltage cell':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_max_voltage_cell/state'
[19:10:20][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms delta cell voltage':
[19:10:20][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_delta_cell_voltage/state'
[19:10:21][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms total voltage':
[19:10:21][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_total_voltage/state'
[19:10:21][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms current':
[19:10:21][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_current/state'
[19:10:21][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms power':
[19:10:21][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_power/state'
[19:10:21][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms charging power':
[19:10:21][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_charging_power/state'
[19:10:21][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms discharging power':
[19:10:21][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_discharging_power/state'
[19:10:21][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms power tube temperature':
[19:10:21][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_power_tube_temperature/state'
[19:10:21][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms state of charge':
[19:10:21][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_state_of_charge/state'
[19:10:21][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms capacity remaining':
[19:10:21][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_capacity_remaining/state'
[19:10:21][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms total battery capacity setting':
[19:10:21][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_total_battery_capacity_setting/state'
[19:10:21][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms charging cycles':
[19:10:21][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_charging_cycles/state'
[19:10:21][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms total charging cycle capacity':
[19:10:21][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_total_charging_cycle_capacity/state'
[19:10:21][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms total runtime':
[19:10:21][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_total_runtime/state'
[19:10:21][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms balancing current':
[19:10:21][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_balancing_current/state'
[19:10:21][C][mqtt.sensor:028]: MQTT Sensor 'jk-bms errors bitmask':
[19:10:21][C][mqtt.sensor:032]:   State Topic: 'jk-bms/sensor/jk-bms_errors_bitmask/state'
[19:10:21][C][mqtt.switch:041]: MQTT Switch 'jk-bms charging': 
[19:10:21][C][mqtt.switch:042]:   State Topic: 'jk-bms/switch/jk-bms_charging/state'
[19:10:21][C][mqtt.switch:042]:   Command Topic: 'jk-bms/switch/jk-bms_charging/command'
[19:10:21][C][mqtt.switch:041]: MQTT Switch 'jk-bms discharging': 
[19:10:21][C][mqtt.switch:042]:   State Topic: 'jk-bms/switch/jk-bms_discharging/state'
[19:10:21][C][mqtt.switch:042]:   Command Topic: 'jk-bms/switch/jk-bms_discharging/command'
[19:10:21][W][mqtt.button:023]: 'jk-bms retrieve settings': Received unknown status payload: 
[19:10:21][C][mqtt.switch:041]: MQTT Switch 'jk-bms balancer': 
[19:10:21][C][mqtt.switch:042]:   State Topic: 'jk-bms/switch/jk-bms_balancer/state'
[19:10:21][C][mqtt.switch:042]:   Command Topic: 'jk-bms/switch/jk-bms_balancer/command'
[19:10:21][W][mqtt.button:023]: 'jk-bms retrieve device info': Received unknown status payload: 
[19:10:21][C][mqtt.switch:041]: MQTT Switch 'jk-bms enable bluetooth connection': 
[19:10:21][C][mqtt.switch:042]:   State Topic: 'jk-bms/switch/jk-bms_enable_bluetooth_connection/state'
[19:10:21][C][mqtt.switch:042]:   Command Topic: 'jk-bms/switch/jk-bms_enable_bluetooth_connection/command'
[19:10:21][C][mqtt.text_sensor:027]: MQTT Text Sensor 'jk-bms errors':
[19:10:21][C][mqtt.text_sensor:028]:   State Topic: 'jk-bms/sensor/jk-bms_errors/state'
[19:10:21][C][mqtt.text_sensor:027]: MQTT Text Sensor 'jk-bms total runtime formatted':
[19:10:21][C][mqtt.text_sensor:028]:   State Topic: 'jk-bms/sensor/jk-bms_total_runtime_formatted/state'
[19:10:21][W][mqtt.number:022]: Can't convert '' to number!
[19:10:21][W][mqtt.number:022]: Can't convert '' to number!
[19:10:21][W][mqtt.number:022]: Can't convert '' to number!
[19:10:22][W][mqtt.switch:032]: 'jk-bms charging': Received unknown status payload: 
[19:10:22][W][mqtt.switch:032]: 'jk-bms discharging': Received unknown status payload: 
[19:10:22][W][mqtt.switch:032]: 'jk-bms balancer': Received unknown status payload: 
[19:10:22][W][mqtt.switch:032]: 'jk-bms enable bluetooth connection': Received unknown status payload: 
[19:10:24][W][jk_bms_ble:240]: [C8:47:80:13:A3:24] Not connected
[19:10:24][I][esp32_ble_client:067]: [0] [C8:47:80:13:A3:24] 0x00 Attempting BLE connection
[19:10:25][I][esp32_ble_client:227]: [0] [C8:47:80:13:A3:24] Connected
[19:10:25][D][switch:055]: 'jk-bms enable bluetooth connection': Sending state ON
[19:10:25][I][jk_bms_ble:216]: Request device info
[19:10:26][D][jk_bms_ble:1463]: Write register: AA.55.90.EB.97.00.00.00.00.00.00.00.00.00.00.00.00.00.00.11 (20)
[19:10:26][D][ble_client:058]: All clients established, services released
[19:10:26][D][binary_sensor:036]: 'jk-bms online status': Sending state ON
[19:10:26][I][jk_bms_ble:1171]: Device info frame (300 bytes) received
[19:10:26][I][jk_bms_ble:1245]:   Vendor ID: JK_B2A20S20P
[19:10:26][I][jk_bms_ble:1248]:   Hardware version: 11.XA
[19:10:26][I][jk_bms_ble:1251]:   Software version: 11.48
[19:10:26][I][jk_bms_ble:1254]:   Uptime: 104700 s
[19:10:26][I][jk_bms_ble:1257]:   Power on count: 13
[19:10:26][I][jk_bms_ble:1260]:   Device name: JK_B2A20S20P
[19:10:26][I][jk_bms_ble:1263]:   Device passcode: 1234
[19:10:26][I][jk_bms_ble:1266]:   Manufacturing date: 240831
[19:10:26][I][jk_bms_ble:1269]:   Serial number: 403292D0165
[19:10:26][I][jk_bms_ble:1272]:   Passcode: 
[19:10:26][I][jk_bms_ble:1275]:   User data: Input Userdata
[19:10:26][I][jk_bms_ble:1278]:   Setup passcode: dodge
[19:10:26][I][jk_bms_ble:1334]:   UART1 Protocol: 0
[19:10:26][I][jk_bms_ble:1336]:   CAN Protocol: 0
[19:10:26][I][jk_bms_ble:1370]:   UART2 Protocol: 0
[19:10:26][I][jk_bms_ble:1399]:   RCV Time: 0.0 h
[19:10:26][I][jk_bms_ble:1403]:   RFV Time: 0.0 h
[19:10:26][W][component:237]: Component esp32_ble took a long time for an operation (98 ms).
[19:10:26][W][component:238]: Components should block for at most 30 ms.
[19:10:26][W][component:170]: Component mqtt cleared Warning flag
[19:10:26][W][component:170]: Component mqtt cleared Warning flag
[19:10:27][W][component:170]: Component mqtt cleared Warning flag
[19:10:27][W][component:170]: Component mqtt cleared Warning flag
[19:10:27][W][component:170]: Component mqtt cleared Warning flag
[19:10:27][W][component:170]: Component mqtt cleared Warning flag
[19:10:29][I][jk_bms_ble:245]: Request status notification
[19:10:29][D][jk_bms_ble:1463]: Write register: AA.55.90.EB.96.00.00.00.00.00.00.00.00.00.00.00.00.00.00.10 (20)
[19:10:29][I][jk_bms_ble:806]: Settings frame (300 bytes) received
[19:10:29][D][number:012]: 'jk-bms max charge current': Sending state 100.000008
[19:10:29][D][number:012]: 'jk-bms cell count': Sending state 16.000000
[19:10:29][D][switch:055]: 'jk-bms charging': Sending state OFF
[19:10:29][D][switch:055]: 'jk-bms discharging': Sending state OFF
[19:10:29][D][switch:055]: 'jk-bms balancer': Sending state ON
[19:10:29][D][number:012]: 'jk-bms total battery capacity': Sending state 280.000000
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 1: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 2: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 3: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 4: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 5: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 6: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 7: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 8: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 9: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 10: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 11: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 12: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 13: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 14: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 15: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 16: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 17: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 18: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 19: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 20: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 21: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 22: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 23: 0.000000 Ohm
[19:10:29][I][jk_bms_ble:1019]:   Con. wire resistance 24: 0.000000 Ohm
[19:10:30][I][jk_bms_ble:1019]:   Con. wire resistance 25: 0.000000 Ohm
[19:10:30][I][jk_bms_ble:1019]:   Con. wire resistance 26: 0.000000 Ohm
[19:10:30][I][jk_bms_ble:1019]:   Con. wire resistance 27: 0.000000 Ohm
[19:10:30][I][jk_bms_ble:1019]:   Con. wire resistance 28: 0.000000 Ohm
[19:10:30][I][jk_bms_ble:1019]:   Con. wire resistance 29: 0.000000 Ohm
[19:10:30][I][jk_bms_ble:1019]:   Con. wire resistance 30: 0.000000 Ohm
[19:10:30][I][jk_bms_ble:1019]:   Con. wire resistance 31: 0.000000 Ohm
[19:10:30][I][jk_bms_ble:1019]:   Con. wire resistance 32: 0.000000 Ohm
[19:10:30][I][jk_bms_ble:1027]:   Device address: 1
[19:10:30][I][jk_bms_ble:1029]:   Precharge time: 0 s
[19:10:30][I][jk_bms_ble:1049]:   Heating switch: OFF
[19:10:30][I][jk_bms_ble:1052]:   GPS Heartbeat: OFF
[19:10:30][I][jk_bms_ble:1053]:   Port switch: CAN
[19:10:30][I][jk_bms_ble:1055]:   Special charger: OFF
[19:10:30][I][jk_bms_ble:1063]:   Smart sleep: 24 h
[19:10:30][I][jk_bms_ble:1065]:   Data field enable control 0: 254
[19:10:30][I][jk_bms_ble:1171]: Device info frame (300 bytes) received
[19:10:30][I][jk_bms_ble:1245]:   Vendor ID: JK_B2A20S20P
[19:10:30][I][jk_bms_ble:1248]:   Hardware version: 11.XA
[19:10:30][I][jk_bms_ble:1251]:   Software version: 11.48
[19:10:30][I][jk_bms_ble:1254]:   Uptime: 104700 s
[19:10:30][I][jk_bms_ble:1257]:   Power on count: 13
[19:10:30][I][jk_bms_ble:1260]:   Device name: JK_B2A20S20P
[19:10:30][I][jk_bms_ble:1263]:   Device passcode: 1234
[19:10:30][I][jk_bms_ble:1266]:   Manufacturing date: 240831
[19:10:30][I][jk_bms_ble:1269]:   Serial number: 403292D0165
[19:10:30][I][jk_bms_ble:1272]:   Passcode: 
[19:10:30][I][jk_bms_ble:1275]:   User data: Input Userdata
[19:10:30][I][jk_bms_ble:1278]:   Setup passcode: dodge
[19:10:30][I][jk_bms_ble:1334]:   UART1 Protocol: 0
[19:10:30][I][jk_bms_ble:1336]:   CAN Protocol: 0
[19:10:30][I][jk_bms_ble:1370]:   UART2 Protocol: 0
[19:10:30][I][jk_bms_ble:1399]:   RCV Time: 0.0 h
[19:10:30][I][jk_bms_ble:1403]:   RFV Time: 0.0 h
[19:10:30][W][component:237]: Component esp32_ble took a long time for an operation (402 ms).
[19:10:30][W][component:238]: Components should block for at most 30 ms.

[syssi]

This warning is fine and can be ignored: Component esp32_ble took a long time for an operation (591 ms).

[syssi]

All three number entities are only populated if a settings frame is received. You can retrieve the settings frame using the retrieve settings button. It looks like the number entity implementation of the mqtt component is unable to handle the state NaN. This could be improved. Could you create an issue? Thanks in advance!

[syssi]

The BMS beeps on every write instruction (a established connection contains a write instruction too).