Problem with ESPHome 2024.10

[jasonxcool]

Hello, I have a problem compiling on ESPHome 2024.10, can you possibly help me?
I have "JBD UP16S015" BMS
The error only occurs with ESPHome 2024.10, before that it always worked.
I have also already done "clean build files".
The YAML has not been changed before.

substitutions:
  name: jbd-bms-uart
  device_description: "Monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART"
  external_components_source: github://syssi/esphome-jbd-bms@main
  tx_pin: GPIO16
  rx_pin: GPIO17
  rx_timeout: 150ms

esphome:
  name: ${name}
  comment: ${device_description}
  min_version: 2024.6.0
  project:
    name: "syssi.esphome-jbd-bms"
    version: 2.0.0

esp32:
  board: wemos_d1_mini32
  framework:
    type: esp-idf

logger:
  level: DEBUG

ota:
  platform: esphome
  password: "**********"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  ap:
    ssid: "Jbd-Bms-Uart Fallback Hotspot"
    password: "***********"

web_server:
  port: 80
  
captive_portal:

external_components:
  - source: ${external_components_source}
    refresh: 0s

api:
  encryption:
    key:  "*******************"

uart:
  - id: uart_0
    baud_rate: 9600
    tx_pin: ${tx_pin}
    rx_pin: ${rx_pin}

jbd_bms:
  - id: bms0
    update_interval: 15s
    rx_timeout: ${rx_timeout}

binary_sensor:
  - platform: jbd_bms
    jbd_bms_id: bms0
    balancing:
      name: "${name} balancing"
    charging:
      name: "${name} charging"
    discharging:
      name: "${name} discharging"
    online_status:
      name: "${name} online status"

sensor:
  - platform: jbd_bms
    jbd_bms_id: bms0
    battery_strings:
      name: "${name} battery strings"
    current:
      name: "${name} current"
    power:
      name: "${name} power"
    charging_power:
      name: "${name} charging power"
    discharging_power:
      name: "${name} discharging power"
    state_of_charge:
      name: "${name} state of charge"
    nominal_capacity:
      name: "${name} nominal capacity"
    charging_cycles:
      name: "${name} charging cycles"
    capacity_remaining:
      name: "${name} capacity remaining"
    battery_cycle_capacity:
      name: "${name} battery cycle capacity"
    total_voltage:
      name: "${name} total voltage"
    average_cell_voltage:
      name: "${name} average cell voltage"
    delta_cell_voltage:
      name: "${name} delta cell voltage"
    min_cell_voltage:
      name: "${name} min cell voltage"
    max_cell_voltage:
      name: "${name} max cell voltage"
    min_voltage_cell:
      name: "${name} min voltage cell"
    max_voltage_cell:
      name: "${name} max voltage cell"
    temperature_1:
      name: "${name} temperature 1"
    temperature_2:
      name: "${name} temperature 2"
    temperature_3:
      name: "${name} temperature 3"
    temperature_4:
      name: "${name} temperature 4"
    temperature_5:
      name: "${name} temperature 5"
    temperature_6:
      name: "${name} temperature 6"
    cell_voltage_1:
      name: "${name} cell voltage 1"
    cell_voltage_2:
      name: "${name} cell voltage 2"
    cell_voltage_3:
      name: "${name} cell voltage 3"
    cell_voltage_4:
      name: "${name} cell voltage 4"
    cell_voltage_5:
      name: "${name} cell voltage 5"
    cell_voltage_6:
      name: "${name} cell voltage 6"
    cell_voltage_7:
      name: "${name} cell voltage 7"
    cell_voltage_8:
      name: "${name} cell voltage 8"
    cell_voltage_9:
      name: "${name} cell voltage 9"
    cell_voltage_10:
      name: "${name} cell voltage 10"
    cell_voltage_11:
      name: "${name} cell voltage 11"
    cell_voltage_12:
      name: "${name} cell voltage 12"
    cell_voltage_13:
      name: "${name} cell voltage 13"
    cell_voltage_14:
      name: "${name} cell voltage 14"
    cell_voltage_15:
      name: "${name} cell voltage 15"
    cell_voltage_16:
      name: "${name} cell voltage 16"
    operation_status_bitmask:
      name: "${name} operation status bitmask"
    errors_bitmask:
      name: "${name} errors bitmask"
    balancer_status_bitmask:
      name: "${name} balancer status bitmask"
    software_version:
      name: "${name} software version"

text_sensor:
  - platform: jbd_bms
    jbd_bms_id: bms0
    errors:
      name: "${name} errors"
    operation_status:
      name: "${name} operation status"
    device_model:
      name: "${name} device model"

switch:
  - platform: jbd_bms
    jbd_bms_id: bms0
    charging:
      name: "${name} charging"
    discharging:
      name: "${name} discharging" 

I get this message when compiling!

 INFO ESPHome 2024.10.2
 INFO Reading configuration /config/esphome/jbd-bms-uart.yaml...
 INFO Updating https://github.com/syssi/esphome-jbd-bms.git@main
 INFO Generating C++ source...
 INFO Compiling app...
 Processing jbd-bms-uart (board: wemos_d1_mini32; framework: espidf; platform: platformio/[email protected])
 --------------------------------------------------------------------------------
 MissingPackageManifestError: Could not find one of 'package.json' manifest files in the package

[syssi]

I cannot reproduce the issue:

INFO ESPHome 2024.10.2
INFO Reading configuration esp32-example-faker.yaml...
INFO Generating C++ source...
INFO Compiling app...
Processing jbd-bms-uart (board: wemos_d1_mini32; framework: espidf; platform: platformio/[email protected])
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Tool Manager: Installing platformio/framework-espidf @ ~3.40408.0
INFO Installing platformio/framework-espidf @ ~3.40408.0
Downloading  [####################################]  100%          
Unpacking  [####################################]  100%          
Tool Manager: [email protected] has been installed!
INFO [email protected] has been installed!
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
 - framework-espidf @ 3.40408.0 (4.4.8) 
 - tool-cmake @ 3.16.4 
 - tool-ninja @ 1.7.1 
 - toolchain-esp32ulp @ 2.35.0-20220830 
 - toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
Creating a new virtual environment for IDF Python dependencies
Installing ESP-IDF's Python dependencies
Collecting urllib3<2
  Downloading urllib3-1.26.20-py2.py3-none-any.whl (144 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 144.2/144.2 kB 4.3 MB/s eta 0:00:00
Collecting cryptography<35.0.0,>=2.1.4
  Using cached cryptography-3.4.8-cp36-abi3-manylinux_2_24_x86_64.whl (3.0 MB)
Collecting future>=0.18.3
  Using cached future-1.0.0-py3-none-any.whl (491 kB)
Collecting pyparsing<2.4.0,>=2.0.3
  Using cached pyparsing-2.3.1-py2.py3-none-any.whl (61 kB)
Collecting kconfiglib~=13.7.1
  Using cached kconfiglib-13.7.1-py2.py3-none-any.whl (145 kB)
Collecting idf-component-manager~=1.0
  Downloading idf_component_manager-1.5.3-py2.py3-none-any.whl (161 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 161.3/161.3 kB 7.1 MB/s eta 0:00:00
Collecting cffi>=1.12
  Downloading cffi-1.17.1-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (467 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 467.2/467.2 kB 5.8 MB/s eta 0:00:00
Collecting packaging
  Using cached packaging-24.1-py3-none-any.whl (53 kB)
Collecting requests<3
  Using cached requests-2.32.3-py3-none-any.whl (64 kB)
Collecting requests-file<2
  Using cached requests_file-1.5.1-py2.py3-none-any.whl (3.7 kB)
Collecting requests-toolbelt
  Using cached requests_toolbelt-1.0.0-py2.py3-none-any.whl (54 kB)
Collecting schema<=0.7.5
  Using cached schema-0.7.5-py2.py3-none-any.whl (17 kB)
Collecting six
  Using cached six-1.16.0-py2.py3-none-any.whl (11 kB)
Collecting tqdm<5
  Downloading tqdm-4.66.5-py3-none-any.whl (78 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 78.4/78.4 kB 5.9 MB/s eta 0:00:00
Collecting colorama
  Using cached colorama-0.4.6-py2.py3-none-any.whl (25 kB)
Collecting pyyaml>5.2
  Downloading PyYAML-6.0.2-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (762 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 763.0/763.0 kB 8.6 MB/s eta 0:00:00
Collecting cachecontrol[filecache]>0.12.6
  Using cached cachecontrol-0.14.0-py3-none-any.whl (22 kB)
Collecting contextlib2>0.6.0
  Using cached contextlib2-21.6.0-py2.py3-none-any.whl (13 kB)
Collecting click
  Using cached click-8.1.7-py3-none-any.whl (97 kB)
Collecting msgpack<2.0.0,>=0.5.2
  Downloading msgpack-1.1.0-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (403 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 403.7/403.7 kB 8.4 MB/s eta 0:00:00
Collecting filelock>=3.8.0
  Downloading filelock-3.16.1-py3-none-any.whl (16 kB)
Collecting pycparser
  Using cached pycparser-2.22-py3-none-any.whl (117 kB)
Collecting charset-normalizer<4,>=2
  Downloading charset_normalizer-3.4.0-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (142 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 142.6/142.6 kB 9.3 MB/s eta 0:00:00
Collecting idna<4,>=2.5
  Downloading idna-3.10-py3-none-any.whl (70 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 70.4/70.4 kB 8.8 MB/s eta 0:00:00
Collecting certifi>=2017.4.17
  Downloading certifi-2024.8.30-py3-none-any.whl (167 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 167.3/167.3 kB 7.7 MB/s eta 0:00:00
Installing collected packages: pyparsing, urllib3, tqdm, six, pyyaml, pycparser, packaging, msgpack, kconfiglib, idna, future, filelock, contextlib2, colorama, click, charset-normalizer, certifi, schema, requests, cffi, requests-toolbelt, requests-file, cryptography, cachecontrol, idf-component-manager
Successfully installed cachecontrol-0.14.0 certifi-2024.8.30 cffi-1.17.1 charset-normalizer-3.4.0 click-8.1.7 colorama-0.4.6 contextlib2-21.6.0 cryptography-3.4.8 filelock-3.16.1 future-1.0.0 idf-component-manager-1.5.3 idna-3.10 kconfiglib-13.7.1 msgpack-1.1.0 packaging-24.1 pycparser-2.22 pyparsing-2.3.1 pyyaml-6.0.2 requests-2.32.3 requests-file-1.5.1 requests-toolbelt-1.0.0 schema-0.7.5 six-1.16.0 tqdm-4.66.5 urllib3-1.26.20
Reading CMake configuration...
Generating assembly for certificate bundle...
Dependency Graph
|-- ArduinoJson @ 6.18.5
Compiling .pioenvs/jbd-bms-uart/src/esphome/components/binary_sensor/automation.o
Compiling .pioenvs/jbd-bms-uart/src/esphome/components/binary_sensor/binary_sensor.o
Compiling .pioenvs/jbd-bms-uart/src/esphome/components/binary_sensor/filter.o
Compiling .pioenvs/jbd-bms-uart/src/esphome/components/button/button.o
Compiling .pioenvs/jbd-bms-uart/src/esphome/components/esp32/core.o
Compiling .pioenvs/jbd-bms-uart/src/esphome/components/esp32/gpio.o
...

[jasonxcool]

Hello, I was able to solve the problem!

Something was obviously messed up during the update to HA core 2024.2.
Uninstalling ESPHome and reinstalling and re-uploading the yaml I had saved solved the problem!

The JBD UP16015 BMS is installed in a 5Kwh LiFePo storage device and appears to be one of the first to be delivered, as JBD sent me the appropriate JBDtools software and update files upon request

https://www.alibaba.com/product-detail/JiaBaiDa-New-UP16S015-Smart-BMS-15s_1600944181176.html

The battery storage has been running in my installation since January 2024 and has been integrated into HA since March 2024.