hwdef-FET_7135.h

#ifndef HWDEF_FET_7135_H
#define HWDEF_FET_7135_H

/* FET + 7135 driver layout
 *           ----
 *   Reset -|1  8|- VCC
 *     OTC -|2  7|- Voltage ADC
 *  Star 3 -|3  6|- PWM (FET)
 *     GND -|4  5|- PWM (1x7135)
 *           ----
 */

#define STAR2_PIN   PB0     // If this pin isn't used for ALT_PWM
#define STAR3_PIN   PB4     // pin 3

#define CAP_PIN     PB3     // pin 2, OTC
#define CAP_CHANNEL 0x03    // MUX 03 corresponds with PB3 (Star 4)
#define CAP_DIDR    ADC3D   // Digital input disable bit corresponding with PB3

#define PWM_PIN     PB1     // pin 6, FET PWM
#define PWM_LVL     OCR0B   // OCR0B is the output compare register for PB1
#define ALT_PWM_PIN PB0     // pin 5, 1x7135 PWM
#define ALT_PWM_LVL OCR0A   // OCR0A is the output compare register for PB0

#define VOLTAGE_PIN PB2     // pin 7, voltage ADC
#define ADC_CHANNEL 0x01    // MUX 01 corresponds with PB2
#define ADC_DIDR    ADC1D   // Digital input disable bit corresponding with PB2
#define ADC_PRSCL   0x06    // clk/64

//#define TEMP_DIDR   ADC4D
#define TEMP_CHANNEL 0b00001111

#define FAST 0xA3           // fast PWM both channels
#define PHASE 0xA1          // phase-correct PWM both channels

#define LAYOUT_DEFINED

#endif