diff --git a/revdep/README.md b/revdep/README.md
new file mode 100644
index 0000000000..ffd7adfde8
--- /dev/null
+++ b/revdep/README.md
@@ -0,0 +1,163 @@
+# Revdeps
+
+## Failed to check (72)
+
+|package |version |error |warning |note |
+|:----------------------------------|:-------|:------|:-------|:----|
+|accept |? | | | |
+|afmToolkit |? | | | |
+|anomaly |? | | | |
+|ANOVAShiny |? | | | |
+|archivist |? | | | |
+|arena2r |? | | | |
+|arkdb |? | | | |
+|asremlPlus |? | | | |
+|auctestr |? | | | |
+|bayesplot |? | | | |
+|beats |? | | | |
+|bestSDP |? | | | |
+|bfw |? | | | |
+|bggum |? | | | |
+|BGPhazard |? | | | |
+|bioinactivation |? | | | |
+|butcher |? | | | |
+|CB2 |? | | | |
+|cbar |? | | | |
+|[CCAMLRGIS](failures.md#ccamlrgis) |3.0.3 |__+1__ | | |
+|CLUSTShiny |? | | | |
+|CollapsABEL |? | | | |
+|DemografixeR |? | | | |
+|DepthProc |? | | | |
+|diceR |? | | | |
+|Distance |1.0.0 |1 | | |
+|DiversityOccupancy |? | | | |
+|ESTER |? | | | |
+|EstimateGroupNetwork |? | | | |
+|EventStudy |0.36 |1 | | |
+|FedData |? | | | |
+|fingertipscharts |0.0.10 |1 | | |
+|gastempt |0.5.0 |1 | | |
+|GeneBook |1.0 |1 | | |
+|GenomicMating |? | | | |
+|GetLattesData |? | | | |
+|GetQuandlData |? | | | |
+|GPSCDF |? | | | |
+|HURDAT |? | | | |
+|IETD |? | | | |
+|IncucyteDRC |? | | | |
+|JacobiEigen |? | | | |
+|jstor |? | | | |
+|MarketMatching |? | | | |
+|MazamaSpatialUtils |? | | | |
+|MBNMAtime |? | | | |
+|MetaboList |? | | | |
+|MixMatrix |? | | | |
+|MLRShiny |? | | | |
+|nesRdata |0.3.1 |1 | | |
+|NetworkExtinction |? | | | |
+|OncoBayes2 |? | | | |
+|PAutilities |? | | | |
+|PKNCA |? | | | |
+|PKPDmisc |? | | | |
+|PML |? | | | |
+|PupilPre |? | | | |
+|R2019nCoV |? | | | |
+|RClickhouse |? | | | |
+|RCzechia |? | | | |
+|rdflib |0.2.3 |1 | | |
+|RDML |1.0 |1 | | |
+|SDLfilter |2.0.0 |1 | | |
+|SimDesign |? | | | |
+|SupMZ |? | | | |
+|Tcomp |? | | | |
+|trackdf |? | | | |
+|trackr |? | | | |
+|TrafficBDE |? | | | |
+|UniprotR |? | | | |
+|VarSelLCM |? | | | |
+|wrswoR |? | | | |
+
+## New problems (79)
+
+|package |version |error |warning |note |
+|:--------------------------------------------------|:-------|:------|:-------|:----|
+|[amt](problems.md#amt) |0.1.1 |__+1__ | | |
+|[anomalize](problems.md#anomalize) |0.2.0 |__+2__ | | |
+|[applicable](problems.md#applicable) |0.0.1 |__+1__ | | |
+|[bdl](problems.md#bdl) |1.0.2 |__+1__ | | |
+|[BMRSr](problems.md#bmrsr) |1.0.1 |__+1__ | | |
+|[cattonum](problems.md#cattonum) |0.0.4 |__+1__ | | |
+|[codebook](problems.md#codebook) |0.8.2 |__+1__ | |2 |
+|[CollapseLevels](problems.md#collapselevels) |0.2.0 |__+1__ | | |
+|[correlationfunnel](problems.md#correlationfunnel) |0.1.0 |__+1__ | |2 |
+|[cutpointr](problems.md#cutpointr) |1.0.2 |__+1__ | | |
+|[ddpcr](problems.md#ddpcr) |1.14 | |__+1__ | |
+|[disk.frame](problems.md#diskframe) |0.3.5 |__+1__ |__+1__ | |
+|[docxtools](problems.md#docxtools) |0.2.1 |__+2__ | | |
+|[driftR](problems.md#driftr) |1.1.0 |__+1__ | | |
+|[DSpoty](problems.md#dspoty) |0.1.0 | |__+1__ | |
+|[easyr](problems.md#easyr) |0.3-1 |__+1__ | | |
+|[eda4treeR](problems.md#eda4treer) |0.2.0 |__+1__ | |1 |
+|[egor](problems.md#egor) |0.20.03 | |__+1__ | |
+|[episheet](problems.md#episheet) |0.4.0 |__+2__ | | |
+|[expstudies](problems.md#expstudies) |0.0.5 |__+1__ | | |
+|[fable](problems.md#fable) |0.2.0 |__+2__ | | |
+|[fabletools](problems.md#fabletools) |0.1.3 |__+2__ | | |
+|[finalfit](problems.md#finalfit) |1.0.1 |__+1__ | | |
+|[foieGras](problems.md#foiegras) |0.4.0 |__+2__ | |1 |
+|[geometr](problems.md#geometr) |0.2.4 |__+1__ | |1 |
+|[getTBinR](problems.md#gettbinr) |0.7.0 |__+1__ | | |
+|[ggedit](problems.md#ggedit) |0.3.0 |__+1__ | |1 |
+|[gratia](problems.md#gratia) |0.3.1 |__+1__ | | |
+|[healthcareai](problems.md#healthcareai) |2.4.0 |__+1__ | | |
+|[idmodelr](problems.md#idmodelr) |0.3.1 |__+1__ | | |
+|[immunarch](problems.md#immunarch) |0.6.4 |__+1__ | |2 |
+|[infer](problems.md#infer) |0.5.1 |__+1__ | |1 |
+|[jpndistrict](problems.md#jpndistrict) |0.3.6 |__+1__ | |1 |
+|[keyATM](problems.md#keyatm) |0.2.0 |__+1__ | |2 |
+|[lpirfs](problems.md#lpirfs) |0.1.7 |__+1__ | |1 |
+|[mason](problems.md#mason) |0.2.6 |__+1__ | |1 |
+|[mcp](problems.md#mcp) |0.2.0 |__+1__ | |1 |
+|[metamicrobiomeR](problems.md#metamicrobiomer) |1.1 |__+1__ | |1 |
+|[mmetrics](problems.md#mmetrics) |0.3.0 |__+1__ | |1 |
+|[neuropsychology](problems.md#neuropsychology) |0.5.0 |__+1__ | |1 |
+|[opentripplanner](problems.md#opentripplanner) |0.2.1.0 |__+1__ | |1 |
+|[pammtools](problems.md#pammtools) |0.2.3 | |__+1__ | |
+|[panelr](problems.md#panelr) |0.7.2 |__+2__ | |1 |
+|[patternize](problems.md#patternize) |0.0.2 | |__+1__ | |
+|[photosynthesis](problems.md#photosynthesis) |1.0.0 |__+1__ | |1 |
+|[pmdplyr](problems.md#pmdplyr) |0.3.1.1 |__+2__ |__+1__ | |
+|[ptstem](problems.md#ptstem) |0.0.7 |__+1__ | |1 |
+|[purrrogress](problems.md#purrrogress) |0.1.1 |__+1__ | |1 |
+|[rabhit](problems.md#rabhit) |0.1.4 |__+1__ | | |
+|[rainette](problems.md#rainette) |0.1.1 |__+1__ | | |
+|[ratPASTA](problems.md#ratpasta) |0.1.0 |__+1__ | |1 |
+|[RCMIP5](problems.md#rcmip5) |1.2.0 |__+1__ | | |
+|[rcv](problems.md#rcv) |0.2.1 |__+1__ | |1 |
+|[rsample](problems.md#rsample) |0.0.6 |__+1__ | | |
+|[RTL](problems.md#rtl) |0.1.1 |__+1__ | |2 |
+|[rules](problems.md#rules) |0.0.1 |__+1__ | | |
+|[saotd](problems.md#saotd) |0.2.0 |__+1__ | |1 |
+|[sergeant](problems.md#sergeant) |0.5.2 | |__+1__ | |
+|[sf](problems.md#sf) |0.9-3 |__+2__ | |1 |
+|[simglm](problems.md#simglm) |0.7.4 |__+1__ | | |
+|[simplevis](problems.md#simplevis) |1.1.3 |__+1__ | |1 |
+|[SIRItoGTFS](problems.md#siritogtfs) |0.2.4 |__+1__ | | |
+|[sistec](problems.md#sistec) |0.0.2 |__+1__ | | |
+|[skynet](problems.md#skynet) |1.3.0 |__+1__ | |1 |
+|[strapgod](problems.md#strapgod) |0.0.4 |__+1__ | | |
+|[StratigrapheR](problems.md#stratigrapher) |1.0.1 |__+1__ | | |
+|[sugarbag](problems.md#sugarbag) |0.1.2 |__+1__ | |1 |
+|[tidyjson](problems.md#tidyjson) |0.3.0 |__+2__ | | |
+|[tidyRSS](problems.md#tidyrss) |2.0.1 |__+1__ | | |
+|[tidystats](problems.md#tidystats) |0.4 |__+1__ | |2 |
+|[tidystopwords](problems.md#tidystopwords) |0.9.0 |__+1__ | |1 |
+|[timetk](problems.md#timetk) |1.0.0 |__+1__ | |2 |
+|[tree.bins](problems.md#treebins) |0.1.1 |__+1__ | |1 |
+|[treeplyr](problems.md#treeplyr) |0.1.7 |__+1__ | | |
+|[tsibble](problems.md#tsibble) |0.8.6 |__+2__ | |1 |
+|[TSstudio](problems.md#tsstudio) |0.1.6 |__+1__ | |1 |
+|[vcfR](problems.md#vcfr) |1.10.0 |__+2__ | |1 |
+|[vpc](problems.md#vpc) |1.2.0 |__+2__ | | |
+|[yamlet](problems.md#yamlet) |0.4.7 | |__+1__ |-1 |
+
diff --git a/revdep/failures.md b/revdep/failures.md
new file mode 100644
index 0000000000..cde810e6dc
--- /dev/null
+++ b/revdep/failures.md
@@ -0,0 +1,6665 @@
+# accept
+
+
+
+* Version: 0.7.1
+* Source code: https://github.com/cran/accept
+* Date/Publication: 2020-03-18 22:00:02 UTC
+* Number of recursive dependencies: 77
+
+Run `cloud_details(, "accept")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/accept/new/accept.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘accept/DESCRIPTION’ ... OK
+* this is package ‘accept’ version ‘0.7.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘accept’ can be installed ... ERROR
+Installation failed.
+See ‘/tmp/workdir/accept/new/accept.Rcheck/00install.out’ for details.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/accept/old/accept.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘accept/DESCRIPTION’ ... OK
+* this is package ‘accept’ version ‘0.7.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘accept’ can be installed ... ERROR
+Installation failed.
+See ‘/tmp/workdir/accept/old/accept.Rcheck/00install.out’ for details.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# afmToolkit
+
+
+
+* Version: 0.0.1
+* Source code: https://github.com/cran/afmToolkit
+* Date/Publication: 2017-04-03 15:30:48 UTC
+* Number of recursive dependencies: 54
+
+Run `cloud_details(, "afmToolkit")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/afmToolkit/new/afmToolkit.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘afmToolkit/DESCRIPTION’ ... OK
+* this is package ‘afmToolkit’ version ‘0.0.1’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/afmToolkit/old/afmToolkit.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘afmToolkit/DESCRIPTION’ ... OK
+* this is package ‘afmToolkit’ version ‘0.0.1’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# anomaly
+
+
+
+* Version: 3.0.1
+* Source code: https://github.com/cran/anomaly
+* Date/Publication: 2020-04-06 12:42:07 UTC
+* Number of recursive dependencies: 84
+
+Run `cloud_details(, "anomaly")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/anomaly/new/anomaly.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘anomaly/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘anomaly’ version ‘3.0.1’
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘anomaly’ can be installed ... OK
+* checking installed package size ... NOTE
+ installed size is 8.1Mb
+ sub-directories of 1Mb or more:
+ data 4.1Mb
+ libs 3.6Mb
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking line endings in C/C++/Fortran sources/headers ... OK
+* checking line endings in Makefiles ... OK
+* checking compilation flags in Makevars ... OK
+* checking for GNU extensions in Makefiles ... OK
+* checking for portable use of $(BLAS_LIBS) and $(LAPACK_LIBS) ... OK
+* checking compiled code ... OK
+* checking examples ... OK
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/anomaly/old/anomaly.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘anomaly/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘anomaly’ version ‘3.0.1’
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘anomaly’ can be installed ... OK
+* checking installed package size ... NOTE
+ installed size is 8.1Mb
+ sub-directories of 1Mb or more:
+ data 4.1Mb
+ libs 3.6Mb
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking line endings in C/C++/Fortran sources/headers ... OK
+* checking line endings in Makefiles ... OK
+* checking compilation flags in Makevars ... OK
+* checking for GNU extensions in Makefiles ... OK
+* checking for portable use of $(BLAS_LIBS) and $(LAPACK_LIBS) ... OK
+* checking compiled code ... OK
+* checking examples ... OK
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+# ANOVAShiny
+
+
+
+* Version: 0.1.0
+* Source code: https://github.com/cran/ANOVAShiny
+* Date/Publication: 2019-05-01 07:00:03 UTC
+* Number of recursive dependencies: 107
+
+Run `cloud_details(, "ANOVAShiny")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/ANOVAShiny/new/ANOVAShiny.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘ANOVAShiny/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘ANOVAShiny’ version ‘0.1.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘ANOVAShiny’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... NOTE
+Namespaces in Imports field not imported from:
+ ‘DescTools’ ‘HH’ ‘datasets’ ‘dplyr’ ‘rhandsontable’ ‘shiny’
+ All declared Imports should be used.
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking examples ... OK
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/ANOVAShiny/old/ANOVAShiny.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘ANOVAShiny/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘ANOVAShiny’ version ‘0.1.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘ANOVAShiny’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... NOTE
+Namespaces in Imports field not imported from:
+ ‘DescTools’ ‘HH’ ‘datasets’ ‘dplyr’ ‘rhandsontable’ ‘shiny’
+ All declared Imports should be used.
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking examples ... OK
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+# archivist
+
+
+
+* Version: 2.3.4
+* Source code: https://github.com/cran/archivist
+* URL: https://pbiecek.github.io/archivist/
+* BugReports: https://github.com/pbiecek/archivist/issues
+* Date/Publication: 2019-08-31 10:50:06 UTC
+* Number of recursive dependencies: 108
+
+Run `cloud_details(, "archivist")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/archivist/new/archivist.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘archivist/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘archivist’ version ‘2.3.4’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘ggplot2’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/archivist/old/archivist.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘archivist/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘archivist’ version ‘2.3.4’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘ggplot2’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# arena2r
+
+
+
+* Version: 1.0.0
+* Source code: https://github.com/cran/arena2r
+* URL: https://github.com/pedroliman/arena2r
+* BugReports: https://github.com/pedroliman/arena2r/issues
+* Date/Publication: 2018-10-19 15:30:03 UTC
+* Number of recursive dependencies: 83
+
+Run `cloud_details(, "arena2r")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/arena2r/new/arena2r.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘arena2r/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘arena2r’ version ‘1.0.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Packages required but not available: 'shiny', 'ggplot2'
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/arena2r/old/arena2r.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘arena2r/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘arena2r’ version ‘1.0.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Packages required but not available: 'shiny', 'ggplot2'
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# arkdb
+
+
+
+* Version: 0.0.5
+* Source code: https://github.com/cran/arkdb
+* URL: https://github.com/ropensci/arkdb
+* BugReports: https://github.com/ropensci/arkdb/issues
+* Date/Publication: 2018-10-31 21:10:03 UTC
+* Number of recursive dependencies: 75
+
+Run `cloud_details(, "arkdb")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/arkdb/new/arkdb.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘arkdb/DESCRIPTION’ ... OK
+* this is package ‘arkdb’ version ‘0.0.5’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘DBI’
+
+Packages suggested but not available:
+ 'dbplyr', 'fs', 'RSQLite', 'MonetDBLite'
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/arkdb/old/arkdb.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘arkdb/DESCRIPTION’ ... OK
+* this is package ‘arkdb’ version ‘0.0.5’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘DBI’
+
+Packages suggested but not available:
+ 'dbplyr', 'fs', 'RSQLite', 'MonetDBLite'
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# asremlPlus
+
+
+
+* Version: 4.2-18
+* Source code: https://github.com/cran/asremlPlus
+* URL: http://chris.brien.name
+* Date/Publication: 2020-03-16 16:50:02 UTC
+* Number of recursive dependencies: 78
+
+Run `cloud_details(, "asremlPlus")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/asremlPlus/new/asremlPlus.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘asremlPlus/DESCRIPTION’ ... OK
+* this is package ‘asremlPlus’ version ‘4.2-18’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+Package which this enhances but not available for checking: ‘asreml’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/asremlPlus/old/asremlPlus.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘asremlPlus/DESCRIPTION’ ... OK
+* this is package ‘asremlPlus’ version ‘4.2-18’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+Package which this enhances but not available for checking: ‘asreml’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# auctestr
+
+
+
+* Version: 1.0.0
+* Source code: https://github.com/cran/auctestr
+* Date/Publication: 2017-11-13 09:46:18 UTC
+* Number of recursive dependencies: 50
+
+Run `cloud_details(, "auctestr")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/auctestr/new/auctestr.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘auctestr/DESCRIPTION’ ... OK
+* this is package ‘auctestr’ version ‘1.0.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘auctestr’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... WARNING
+Error: package or namespace load failed for ‘auctestr’:
+ .onLoad failed in loadNamespace() for 'pillar', details:
+ call: loadNamespace(name)
+ error: there is no package called ‘crayon’
+Execution halted
+
+It looks like this package has a loading problem when not on .libPaths:
+see the messages for details.
+* checking dependencies in R code ... NOTE
+Namespace in Imports field not imported from: ‘tidyr’
+ All declared Imports should be used.
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘basic-auctestr-vignette.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: 1 WARNING, 1 NOTE
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/auctestr/old/auctestr.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘auctestr/DESCRIPTION’ ... OK
+* this is package ‘auctestr’ version ‘1.0.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘auctestr’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... WARNING
+Error: package or namespace load failed for ‘auctestr’:
+ .onLoad failed in loadNamespace() for 'pillar', details:
+ call: loadNamespace(name)
+ error: there is no package called ‘crayon’
+Execution halted
+
+It looks like this package has a loading problem when not on .libPaths:
+see the messages for details.
+* checking dependencies in R code ... NOTE
+Namespace in Imports field not imported from: ‘tidyr’
+ All declared Imports should be used.
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘basic-auctestr-vignette.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: 1 WARNING, 1 NOTE
+
+
+
+
+
+
+```
+# bayesplot
+
+
+
+* Version: 1.7.2
+* Source code: https://github.com/cran/bayesplot
+* URL: https://mc-stan.org/bayesplot
+* BugReports: https://github.com/stan-dev/bayesplot/issues/
+* Date/Publication: 2020-05-28 05:20:07 UTC
+* Number of recursive dependencies: 143
+
+Run `cloud_details(, "bayesplot")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/bayesplot/new/bayesplot.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘bayesplot/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘bayesplot’ version ‘1.7.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘bayesplot’ can be installed ... OK
+* checking installed package size ... NOTE
+ installed size is 5.9Mb
+ sub-directories of 1Mb or more:
+ R 1.8Mb
+ doc 3.5Mb
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking R/sysdata.rda ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘graphical-ppcs.Rmd’using ‘UTF-8’... OK
+ ‘plotting-mcmc-draws.Rmd’using ‘UTF-8’... OK
+ ‘visual-mcmc-diagnostics.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/bayesplot/old/bayesplot.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘bayesplot/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘bayesplot’ version ‘1.7.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘bayesplot’ can be installed ... OK
+* checking installed package size ... NOTE
+ installed size is 5.9Mb
+ sub-directories of 1Mb or more:
+ R 1.8Mb
+ doc 3.5Mb
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking R/sysdata.rda ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘graphical-ppcs.Rmd’using ‘UTF-8’... OK
+ ‘plotting-mcmc-draws.Rmd’using ‘UTF-8’... OK
+ ‘visual-mcmc-diagnostics.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+# beats
+
+
+
+* Version: 0.1.1
+* Source code: https://github.com/cran/beats
+* URL: https://github.com/FlukeAndFeather/beats
+* BugReports: https://github.com/FlukeAndFeather/beats/issues
+* Date/Publication: 2020-02-28 10:40:02 UTC
+* Number of recursive dependencies: 88
+
+Run `cloud_details(, "beats")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/beats/new/beats.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘beats/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘beats’ version ‘0.1.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/beats/old/beats.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘beats/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘beats’ version ‘0.1.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# bestSDP
+
+
+
+* Version: 0.1.2
+* Source code: https://github.com/cran/bestSDP
+* Date/Publication: 2019-12-13 13:10:06 UTC
+* Number of recursive dependencies: 82
+
+Run `cloud_details(, "bestSDP")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/bestSDP/new/bestSDP.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘bestSDP/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘bestSDP’ version ‘0.1.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘bestSDP’ can be installed ... ERROR
+Installation failed.
+See ‘/tmp/workdir/bestSDP/new/bestSDP.Rcheck/00install.out’ for details.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/bestSDP/old/bestSDP.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘bestSDP/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘bestSDP’ version ‘0.1.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘bestSDP’ can be installed ... ERROR
+Installation failed.
+See ‘/tmp/workdir/bestSDP/old/bestSDP.Rcheck/00install.out’ for details.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# bfw
+
+
+
+* Version: 0.4.1
+* Source code: https://github.com/cran/bfw
+* URL: https://github.com/oeysan/bfw/
+* BugReports: https://github.com/oeysan/bfw/issues/
+* Date/Publication: 2019-11-25 09:20:10 UTC
+* Number of recursive dependencies: 92
+
+Run `cloud_details(, "bfw")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/bfw/new/bfw.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘bfw/DESCRIPTION’ ... OK
+* this is package ‘bfw’ version ‘0.4.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘rvg’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/bfw/old/bfw.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘bfw/DESCRIPTION’ ... OK
+* this is package ‘bfw’ version ‘0.4.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘rvg’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# bggum
+
+
+
+* Version: 1.0.2
+* Source code: https://github.com/cran/bggum
+* URL: https://github.com/duckmayr/bggum
+* BugReports: https://github.com/duckmayr/bggum/issues
+* Date/Publication: 2020-01-19 08:40:02 UTC
+* Number of recursive dependencies: 84
+
+Run `cloud_details(, "bggum")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/bggum/new/bggum.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘bggum/DESCRIPTION’ ... OK
+* this is package ‘bggum’ version ‘1.0.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘tidyr’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/bggum/old/bggum.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘bggum/DESCRIPTION’ ... OK
+* this is package ‘bggum’ version ‘1.0.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘tidyr’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# BGPhazard
+
+
+
+* Version: 2.0.0
+* Source code: https://github.com/cran/BGPhazard
+* Date/Publication: 2020-01-13 09:20:22 UTC
+* Number of recursive dependencies: 59
+
+Run `cloud_details(, "BGPhazard")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/BGPhazard/new/BGPhazard.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘BGPhazard/DESCRIPTION’ ... OK
+* this is package ‘BGPhazard’ version ‘2.0.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/BGPhazard/old/BGPhazard.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘BGPhazard/DESCRIPTION’ ... OK
+* this is package ‘BGPhazard’ version ‘2.0.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# bioinactivation
+
+
+
+* Version: 1.2.3
+* Source code: https://github.com/cran/bioinactivation
+* Date/Publication: 2019-08-01 16:40:15 UTC
+* Number of recursive dependencies: 71
+
+Run `cloud_details(, "bioinactivation")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/bioinactivation/new/bioinactivation.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘bioinactivation/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘bioinactivation’ version ‘1.2.3’
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘bioinactivation’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘inactivation.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: OK
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/bioinactivation/old/bioinactivation.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘bioinactivation/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘bioinactivation’ version ‘1.2.3’
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘bioinactivation’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘inactivation.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: OK
+
+
+
+
+
+
+```
+# butcher
+
+
+
+* Version: 0.1.2
+* Source code: https://github.com/cran/butcher
+* URL: https://tidymodels.github.io/butcher, https://github.com/tidymodels/butcher
+* BugReports: https://github.com/tidymodels/butcher/issues
+* Date/Publication: 2020-01-23 22:40:02 UTC
+* Number of recursive dependencies: 181
+
+Run `cloud_details(, "butcher")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/butcher/new/butcher.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘butcher/DESCRIPTION’ ... OK
+* this is package ‘butcher’ version ‘0.1.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘NMF’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/butcher/old/butcher.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘butcher/DESCRIPTION’ ... OK
+* this is package ‘butcher’ version ‘0.1.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘NMF’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# CB2
+
+
+
+* Version: 1.3.3
+* Source code: https://github.com/cran/CB2
+* Date/Publication: 2020-05-26 11:00:21 UTC
+* Number of recursive dependencies: 96
+
+Run `cloud_details(, "CB2")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/CB2/new/CB2.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘CB2/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘CB2’ version ‘1.3.3’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘metap’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/CB2/old/CB2.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘CB2/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘CB2’ version ‘1.3.3’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘metap’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# cbar
+
+
+
+* Version: 0.1.3
+* Source code: https://github.com/cran/cbar
+* URL: https://github.com/zedoul/cbar
+* BugReports: https://github.com/zedoul/cbar/issues
+* Date/Publication: 2017-10-24 13:20:22 UTC
+* Number of recursive dependencies: 64
+
+Run `cloud_details(, "cbar")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/cbar/new/cbar.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘cbar/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘cbar’ version ‘0.1.3’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Packages required but not available: 'Boom', 'bsts'
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/cbar/old/cbar.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘cbar/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘cbar’ version ‘0.1.3’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Packages required but not available: 'Boom', 'bsts'
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# CCAMLRGIS
+
+
+
+* Version: 3.0.3
+* Source code: https://github.com/cran/CCAMLRGIS
+* URL: https://github.com/ccamlr/CCAMLRGIS
+* Date/Publication: 2020-03-23 05:20:02 UTC
+* Number of recursive dependencies: 42
+
+Run `cloud_details(, "CCAMLRGIS")` for more info
+
+
+
+## Newly broken
+
+* checking whether package ‘CCAMLRGIS’ can be installed ... ERROR
+ ```
+ Installation failed.
+ See ‘/tmp/workdir/CCAMLRGIS/new/CCAMLRGIS.Rcheck/00install.out’ for details.
+ ```
+
+## Installation
+
+### Devel
+
+```
+* installing *source* package ‘CCAMLRGIS’ ...
+** package ‘CCAMLRGIS’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** data
+*** moving datasets to lazyload DB
+** inst
+** byte-compile and prepare package for lazy loading
+Error: package or namespace load failed for ‘raster’ in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]):
+ there is no package called ‘Rcpp’
+Error: package ‘raster’ could not be loaded
+Execution halted
+ERROR: lazy loading failed for package ‘CCAMLRGIS’
+* removing ‘/tmp/workdir/CCAMLRGIS/new/CCAMLRGIS.Rcheck/CCAMLRGIS’
+
+```
+### CRAN
+
+```
+* installing *source* package ‘CCAMLRGIS’ ...
+** package ‘CCAMLRGIS’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** data
+*** moving datasets to lazyload DB
+** inst
+** byte-compile and prepare package for lazy loading
+** help
+*** installing help indices
+** building package indices
+** installing vignettes
+** testing if installed package can be loaded from temporary location
+** testing if installed package can be loaded from final location
+** testing if installed package keeps a record of temporary installation path
+* DONE (CCAMLRGIS)
+
+```
+# CLUSTShiny
+
+
+
+* Version: 0.1.0
+* Source code: https://github.com/cran/CLUSTShiny
+* Date/Publication: 2019-04-28 07:10:06 UTC
+* Number of recursive dependencies: 99
+
+Run `cloud_details(, "CLUSTShiny")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/CLUSTShiny/new/CLUSTShiny.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘CLUSTShiny/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘CLUSTShiny’ version ‘0.1.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘CLUSTShiny’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... NOTE
+Namespaces in Imports field not imported from:
+ ‘MASS’ ‘cluster’ ‘datasets’ ‘dplyr’ ‘klaR’ ‘psycho’ ‘shiny’
+ All declared Imports should be used.
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking examples ... OK
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/CLUSTShiny/old/CLUSTShiny.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘CLUSTShiny/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘CLUSTShiny’ version ‘0.1.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘CLUSTShiny’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... NOTE
+Namespaces in Imports field not imported from:
+ ‘MASS’ ‘cluster’ ‘datasets’ ‘dplyr’ ‘klaR’ ‘psycho’ ‘shiny’
+ All declared Imports should be used.
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking examples ... OK
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+# CollapsABEL
+
+
+
+* Version: 0.10.11
+* Source code: https://github.com/cran/CollapsABEL
+* URL: https://bitbucket.org/kindlychung/collapsabel2/overview
+* BugReports: https://bitbucket.org/kindlychung/collapsabel2/issues
+* Date/Publication: 2016-12-11 20:35:07
+* Number of recursive dependencies: 108
+
+Run `cloud_details(, "CollapsABEL")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/CollapsABEL/new/CollapsABEL.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘CollapsABEL/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘CollapsABEL’ version ‘0.10.11’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/CollapsABEL/old/CollapsABEL.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘CollapsABEL/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘CollapsABEL’ version ‘0.10.11’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# DemografixeR
+
+
+
+* Version: 0.1.1
+* Source code: https://github.com/cran/DemografixeR
+* URL: https://matbmeijer.github.io/DemografixeR, https://github.com/matbmeijer/DemografixeR
+* BugReports: https://github.com/matbmeijer/DemografixeR/issues
+* Date/Publication: 2020-05-06 12:50:22 UTC
+* Number of recursive dependencies: 57
+
+Run `cloud_details(, "DemografixeR")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+
+
+
+
+
+
+```
+### CRAN
+
+```
+
+
+
+
+
+
+```
+# DepthProc
+
+
+
+* Version: 2.1.3
+* Source code: https://github.com/cran/DepthProc
+* URL: https://www.depthproc.zstat.pl/, https://github.com/zzawadz/DepthProc
+* BugReports: https://github.com/zzawadz/DepthProc/issues
+* Date/Publication: 2020-02-19 21:00:03 UTC
+* Number of recursive dependencies: 115
+
+Run `cloud_details(, "DepthProc")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/DepthProc/new/DepthProc.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘DepthProc/DESCRIPTION’ ... OK
+* this is package ‘DepthProc’ version ‘2.1.3’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘DepthProc’ can be installed ... OK
+* checking installed package size ... NOTE
+ installed size is 7.3Mb
+ sub-directories of 1Mb or more:
+ libs 6.3Mb
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking line endings in C/C++/Fortran sources/headers ... OK
+* checking line endings in Makefiles ... OK
+* checking compilation flags in Makevars ... OK
+* checking for GNU extensions in Makefiles ... OK
+* checking for portable use of $(BLAS_LIBS) and $(LAPACK_LIBS) ... OK
+* checking compiled code ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/DepthProc/old/DepthProc.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘DepthProc/DESCRIPTION’ ... OK
+* this is package ‘DepthProc’ version ‘2.1.3’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘DepthProc’ can be installed ... OK
+* checking installed package size ... NOTE
+ installed size is 7.3Mb
+ sub-directories of 1Mb or more:
+ libs 6.3Mb
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking line endings in C/C++/Fortran sources/headers ... OK
+* checking line endings in Makefiles ... OK
+* checking compilation flags in Makevars ... OK
+* checking for GNU extensions in Makefiles ... OK
+* checking for portable use of $(BLAS_LIBS) and $(LAPACK_LIBS) ... OK
+* checking compiled code ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+# diceR
+
+
+
+* Version: 0.6.0
+* Source code: https://github.com/cran/diceR
+* URL: https://github.com/AlineTalhouk/diceR, https://alinetalhouk.github.io/diceR
+* BugReports: https://github.com/AlineTalhouk/diceR/issues
+* Date/Publication: 2019-07-25 20:30:02 UTC
+* Number of recursive dependencies: 173
+
+Run `cloud_details(, "diceR")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/diceR/new/diceR.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘diceR/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘diceR’ version ‘0.6.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘NMF’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/diceR/old/diceR.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘diceR/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘diceR’ version ‘0.6.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘NMF’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# Distance
+
+
+
+* Version: 1.0.0
+* Source code: https://github.com/cran/Distance
+* URL: http://github.com/DistanceDevelopment/Distance/
+* BugReports: https://github.com/DistanceDevelopment/Distance/issues
+* Date/Publication: 2020-01-31 13:20:17 UTC
+* Number of recursive dependencies: 45
+
+Run `cloud_details(, "Distance")` for more info
+
+
+
+## In both
+
+* checking whether package ‘Distance’ can be installed ... ERROR
+ ```
+ Installation failed.
+ See ‘/tmp/workdir/Distance/new/Distance.Rcheck/00install.out’ for details.
+ ```
+
+## Installation
+
+### Devel
+
+```
+* installing *source* package ‘Distance’ ...
+** package ‘Distance’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** data
+** inst
+** byte-compile and prepare package for lazy loading
+Error: package or namespace load failed for ‘mrds’ in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]):
+ there is no package called ‘Rsolnp’
+Error: package ‘mrds’ could not be loaded
+Execution halted
+ERROR: lazy loading failed for package ‘Distance’
+* removing ‘/tmp/workdir/Distance/new/Distance.Rcheck/Distance’
+
+```
+### CRAN
+
+```
+* installing *source* package ‘Distance’ ...
+** package ‘Distance’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** data
+** inst
+** byte-compile and prepare package for lazy loading
+Error: package or namespace load failed for ‘mrds’ in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]):
+ there is no package called ‘Rsolnp’
+Error: package ‘mrds’ could not be loaded
+Execution halted
+ERROR: lazy loading failed for package ‘Distance’
+* removing ‘/tmp/workdir/Distance/old/Distance.Rcheck/Distance’
+
+```
+# DiversityOccupancy
+
+
+
+* Version: 1.0.6
+* Source code: https://github.com/cran/DiversityOccupancy
+* Date/Publication: 2017-03-02 18:32:36
+* Number of recursive dependencies: 96
+
+Run `cloud_details(, "DiversityOccupancy")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/DiversityOccupancy/new/DiversityOccupancy.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘DiversityOccupancy/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘DiversityOccupancy’ version ‘1.0.6’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/DiversityOccupancy/old/DiversityOccupancy.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘DiversityOccupancy/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘DiversityOccupancy’ version ‘1.0.6’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# ESTER
+
+
+
+* Version: 0.2.0
+* Source code: https://github.com/cran/ESTER
+* URL: https://github.com/lnalborczyk/ESTER
+* BugReports: https://github.com/lnalborczyk/ESTER/issues
+* Date/Publication: 2017-12-10 14:21:14 UTC
+* Number of recursive dependencies: 127
+
+Run `cloud_details(, "ESTER")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/ESTER/new/ESTER.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘ESTER/DESCRIPTION’ ... OK
+* this is package ‘ESTER’ version ‘0.2.0’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Packages required but not available: 'brms', 'ggplot2'
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/ESTER/old/ESTER.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘ESTER/DESCRIPTION’ ... OK
+* this is package ‘ESTER’ version ‘0.2.0’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Packages required but not available: 'brms', 'ggplot2'
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# EstimateGroupNetwork
+
+
+
+* Version: 0.2.2
+* Source code: https://github.com/cran/EstimateGroupNetwork
+* Date/Publication: 2020-01-08 08:20:02 UTC
+* Number of recursive dependencies: 111
+
+Run `cloud_details(, "EstimateGroupNetwork")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/EstimateGroupNetwork/new/EstimateGroupNetwork.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘EstimateGroupNetwork/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘EstimateGroupNetwork’ version ‘0.2.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/EstimateGroupNetwork/old/EstimateGroupNetwork.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘EstimateGroupNetwork/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘EstimateGroupNetwork’ version ‘0.2.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# EventStudy
+
+
+
+* Version: 0.36
+* Source code: https://github.com/cran/EventStudy
+* URL: http://eventstudytools.com
+* BugReports: https://github.com/EventStudyTools/api-wrapper.r/issues
+* Date/Publication: 2019-03-14 12:13:31 UTC
+* Number of recursive dependencies: 135
+
+Run `cloud_details(, "EventStudy")` for more info
+
+
+
+## In both
+
+* checking whether package ‘EventStudy’ can be installed ... ERROR
+ ```
+ Installation failed.
+ See ‘/tmp/workdir/EventStudy/new/EventStudy.Rcheck/00install.out’ for details.
+ ```
+
+## Installation
+
+### Devel
+
+```
+* installing *source* package ‘EventStudy’ ...
+** package ‘EventStudy’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** inst
+** byte-compile and prepare package for lazy loading
+Error in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]) :
+ there is no package called ‘mime’
+Calls: ... loadNamespace -> withRestarts -> withOneRestart -> doWithOneRestart
+Execution halted
+ERROR: lazy loading failed for package ‘EventStudy’
+* removing ‘/tmp/workdir/EventStudy/new/EventStudy.Rcheck/EventStudy’
+
+```
+### CRAN
+
+```
+* installing *source* package ‘EventStudy’ ...
+** package ‘EventStudy’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** inst
+** byte-compile and prepare package for lazy loading
+Error in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]) :
+ there is no package called ‘mime’
+Calls: ... loadNamespace -> withRestarts -> withOneRestart -> doWithOneRestart
+Execution halted
+ERROR: lazy loading failed for package ‘EventStudy’
+* removing ‘/tmp/workdir/EventStudy/old/EventStudy.Rcheck/EventStudy’
+
+```
+# FedData
+
+
+
+* Version: 2.5.7
+* Source code: https://github.com/cran/FedData
+* URL: https://github.com/ropensci/FedData
+* BugReports: https://github.com/ropensci/FedData/issues
+* Date/Publication: 2019-04-22 13:40:03 UTC
+* Number of recursive dependencies: 130
+
+Run `cloud_details(, "FedData")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/FedData/new/FedData.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘FedData/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘FedData’ version ‘2.5.7’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘FedData’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking R/sysdata.rda ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* DONE
+Status: OK
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/FedData/old/FedData.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘FedData/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘FedData’ version ‘2.5.7’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘FedData’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking R/sysdata.rda ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* DONE
+Status: OK
+
+
+
+
+
+
+```
+# fingertipscharts
+
+
+
+* Version: 0.0.10
+* Source code: https://github.com/cran/fingertipscharts
+* BugReports: https://github.com/PublicHealthEngland/fingertipscharts/issues
+* Date/Publication: 2019-10-07 15:00:03 UTC
+* Number of recursive dependencies: 142
+
+Run `cloud_details(, "fingertipscharts")` for more info
+
+
+
+## In both
+
+* checking whether package ‘fingertipscharts’ can be installed ... ERROR
+ ```
+ Installation failed.
+ See ‘/tmp/workdir/fingertipscharts/new/fingertipscharts.Rcheck/00install.out’ for details.
+ ```
+
+## Installation
+
+### Devel
+
+```
+* installing *source* package ‘fingertipscharts’ ...
+** package ‘fingertipscharts’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** data
+*** moving datasets to lazyload DB
+** inst
+** byte-compile and prepare package for lazy loading
+Error in dyn.load(file, DLLpath = DLLpath, ...) :
+ unable to load shared object '/opt/R/3.6.3/lib/R/library/jqr/libs/jqr.so':
+ libjq.so.1: cannot open shared object file: No such file or directory
+Calls: ... asNamespace -> loadNamespace -> library.dynam -> dyn.load
+Execution halted
+ERROR: lazy loading failed for package ‘fingertipscharts’
+* removing ‘/tmp/workdir/fingertipscharts/new/fingertipscharts.Rcheck/fingertipscharts’
+
+```
+### CRAN
+
+```
+* installing *source* package ‘fingertipscharts’ ...
+** package ‘fingertipscharts’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** data
+*** moving datasets to lazyload DB
+** inst
+** byte-compile and prepare package for lazy loading
+Error in dyn.load(file, DLLpath = DLLpath, ...) :
+ unable to load shared object '/opt/R/3.6.3/lib/R/library/jqr/libs/jqr.so':
+ libjq.so.1: cannot open shared object file: No such file or directory
+Calls: ... asNamespace -> loadNamespace -> library.dynam -> dyn.load
+Execution halted
+ERROR: lazy loading failed for package ‘fingertipscharts’
+* removing ‘/tmp/workdir/fingertipscharts/old/fingertipscharts.Rcheck/fingertipscharts’
+
+```
+# gastempt
+
+
+
+* Version: 0.5.0
+* Source code: https://github.com/cran/gastempt
+* URL: http://github.com/dmenne/gastempt
+* BugReports: http://github.com/dmenne/gastempt/issues
+* Date/Publication: 2020-05-01 10:10:02 UTC
+* Number of recursive dependencies: 88
+
+Run `cloud_details(, "gastempt")` for more info
+
+
+
+## In both
+
+* checking whether package ‘gastempt’ can be installed ... ERROR
+ ```
+ Installation failed.
+ See ‘/tmp/workdir/gastempt/new/gastempt.Rcheck/00install.out’ for details.
+ ```
+
+## Installation
+
+### Devel
+
+```
+* installing *source* package ‘gastempt’ ...
+** package ‘gastempt’ successfully unpacked and MD5 sums checked
+** using staged installation
+Error in loadNamespace(name) : there is no package called ‘rstantools’
+Calls: :: ... loadNamespace -> withRestarts -> withOneRestart -> doWithOneRestart
+Execution halted
+ERROR: configuration failed for package ‘gastempt’
+* removing ‘/tmp/workdir/gastempt/new/gastempt.Rcheck/gastempt’
+
+```
+### CRAN
+
+```
+* installing *source* package ‘gastempt’ ...
+** package ‘gastempt’ successfully unpacked and MD5 sums checked
+** using staged installation
+Error in loadNamespace(name) : there is no package called ‘rstantools’
+Calls: :: ... loadNamespace -> withRestarts -> withOneRestart -> doWithOneRestart
+Execution halted
+ERROR: configuration failed for package ‘gastempt’
+* removing ‘/tmp/workdir/gastempt/old/gastempt.Rcheck/gastempt’
+
+```
+# GeneBook
+
+
+
+* Version: 1.0
+* Source code: https://github.com/cran/GeneBook
+* Date/Publication: 2019-08-01 13:30:05 UTC
+* Number of recursive dependencies: 41
+
+Run `cloud_details(, "GeneBook")` for more info
+
+
+
+## In both
+
+* checking whether package ‘GeneBook’ can be installed ... ERROR
+ ```
+ Installation failed.
+ See ‘/tmp/workdir/GeneBook/new/GeneBook.Rcheck/00install.out’ for details.
+ ```
+
+## Installation
+
+### Devel
+
+```
+* installing *source* package ‘GeneBook’ ...
+** package ‘GeneBook’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** byte-compile and prepare package for lazy loading
+Failed with error: ‘there is no package called ‘R.utils’’
+Error in loadNamespace(j <- i[[1L]], c(lib.loc, .libPaths()), versionCheck = vI[[j]]) :
+ there is no package called ‘R.utils’
+Error: unable to load R code in package ‘GeneBook’
+Execution halted
+ERROR: lazy loading failed for package ‘GeneBook’
+* removing ‘/tmp/workdir/GeneBook/new/GeneBook.Rcheck/GeneBook’
+
+```
+### CRAN
+
+```
+* installing *source* package ‘GeneBook’ ...
+** package ‘GeneBook’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** byte-compile and prepare package for lazy loading
+Failed with error: ‘there is no package called ‘R.utils’’
+Error in loadNamespace(j <- i[[1L]], c(lib.loc, .libPaths()), versionCheck = vI[[j]]) :
+ there is no package called ‘R.utils’
+Error: unable to load R code in package ‘GeneBook’
+Execution halted
+ERROR: lazy loading failed for package ‘GeneBook’
+* removing ‘/tmp/workdir/GeneBook/old/GeneBook.Rcheck/GeneBook’
+
+```
+# GenomicMating
+
+
+
+* Version: 2.0
+* Source code: https://github.com/cran/GenomicMating
+* Date/Publication: 2018-07-01 23:00:03 UTC
+* Number of recursive dependencies: 92
+
+Run `cloud_details(, "GenomicMating")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/GenomicMating/new/GenomicMating.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘GenomicMating/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘GenomicMating’ version ‘2.0’
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘GenomicMating’ can be installed ... ERROR
+Installation failed.
+See ‘/tmp/workdir/GenomicMating/new/GenomicMating.Rcheck/00install.out’ for details.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/GenomicMating/old/GenomicMating.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘GenomicMating/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘GenomicMating’ version ‘2.0’
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘GenomicMating’ can be installed ... ERROR
+Installation failed.
+See ‘/tmp/workdir/GenomicMating/old/GenomicMating.Rcheck/00install.out’ for details.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# GetLattesData
+
+
+
+* Version: 1.4
+* Source code: https://github.com/cran/GetLattesData
+* URL: https://github.com/msperlin/GetLattesData/
+* BugReports: https://github.com/msperlin/GetLattesData/issues
+* Date/Publication: 2020-03-07 15:30:02 UTC
+* Number of recursive dependencies: 70
+
+Run `cloud_details(, "GetLattesData")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/GetLattesData/new/GetLattesData.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘GetLattesData/DESCRIPTION’ ... OK
+* this is package ‘GetLattesData’ version ‘1.4’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘stringdist’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/GetLattesData/old/GetLattesData.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘GetLattesData/DESCRIPTION’ ... OK
+* this is package ‘GetLattesData’ version ‘1.4’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘stringdist’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# GetQuandlData
+
+
+
+* Version: 0.1.0
+* Source code: https://github.com/cran/GetQuandlData
+* URL: https://github.com/msperlin/GetQuandlData/
+* BugReports: https://github.com/msperlin/GetQuandlData/issues
+* Date/Publication: 2019-10-20 11:30:02 UTC
+* Number of recursive dependencies: 96
+
+Run `cloud_details(, "GetQuandlData")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/GetQuandlData/new/GetQuandlData.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘GetQuandlData/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘GetQuandlData’ version ‘0.1.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘ggplot2’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/GetQuandlData/old/GetQuandlData.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘GetQuandlData/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘GetQuandlData’ version ‘0.1.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘ggplot2’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# GPSCDF
+
+
+
+* Version: 0.1.1
+* Source code: https://github.com/cran/GPSCDF
+* Date/Publication: 2019-03-05 15:20:18 UTC
+* Number of recursive dependencies: 80
+
+Run `cloud_details(, "GPSCDF")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/GPSCDF/new/GPSCDF.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘GPSCDF/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘GPSCDF’ version ‘0.1.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘GPSCDF’ can be installed ... ERROR
+Installation failed.
+See ‘/tmp/workdir/GPSCDF/new/GPSCDF.Rcheck/00install.out’ for details.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/GPSCDF/old/GPSCDF.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘GPSCDF/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘GPSCDF’ version ‘0.1.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘GPSCDF’ can be installed ... ERROR
+Installation failed.
+See ‘/tmp/workdir/GPSCDF/old/GPSCDF.Rcheck/00install.out’ for details.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# HURDAT
+
+
+
+* Version: 0.2.3.1
+* Source code: https://github.com/cran/HURDAT
+* URL: https://github.com/timtrice/HURDAT
+* BugReports: https://github.com/timtrice/HURDAT/issues
+* Date/Publication: 2020-01-28 14:20:11 UTC
+* Number of recursive dependencies: 86
+
+Run `cloud_details(, "HURDAT")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/HURDAT/new/HURDAT.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘HURDAT/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘HURDAT’ version ‘0.2.3.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘HURDAT’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... NOTE
+Namespaces in Imports field not imported from:
+ ‘rvest’ ‘xml2’
+ All declared Imports should be used.
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘hurdat.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/HURDAT/old/HURDAT.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘HURDAT/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘HURDAT’ version ‘0.2.3.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘HURDAT’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... NOTE
+Namespaces in Imports field not imported from:
+ ‘rvest’ ‘xml2’
+ All declared Imports should be used.
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘hurdat.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+# IETD
+
+
+
+* Version: 1.0.0
+* Source code: https://github.com/cran/IETD
+* Date/Publication: 2020-03-10 08:50:06 UTC
+* Number of recursive dependencies: 62
+
+Run `cloud_details(, "IETD")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/IETD/new/IETD.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘IETD/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘IETD’ version ‘1.0.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘IETD’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... NOTE
+Namespace in Imports field not imported from: ‘Rdpack’
+ All declared Imports should be used.
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/IETD/old/IETD.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘IETD/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘IETD’ version ‘1.0.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘IETD’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... NOTE
+Namespace in Imports field not imported from: ‘Rdpack’
+ All declared Imports should be used.
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+# IncucyteDRC
+
+
+
+* Version: 0.5.4
+* Source code: https://github.com/cran/IncucyteDRC
+* URL: https://github.com/chapmandu2/IncucyteDRC
+* BugReports: https://github.com/chapmandu2/IncucyteDRC/issues
+* Date/Publication: 2016-04-23 14:21:03
+* Number of recursive dependencies: 119
+
+Run `cloud_details(, "IncucyteDRC")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/IncucyteDRC/new/IncucyteDRC.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘IncucyteDRC/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘IncucyteDRC’ version ‘0.5.4’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/IncucyteDRC/old/IncucyteDRC.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘IncucyteDRC/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘IncucyteDRC’ version ‘0.5.4’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# JacobiEigen
+
+
+
+* Version: 0.3-3
+* Source code: https://github.com/cran/JacobiEigen
+* Date/Publication: 2019-03-10 07:12:44 UTC
+* Number of recursive dependencies: 61
+
+Run `cloud_details(, "JacobiEigen")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/JacobiEigen/new/JacobiEigen.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘JacobiEigen/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘JacobiEigen’ version ‘0.3-3’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘ggplot2’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/JacobiEigen/old/JacobiEigen.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘JacobiEigen/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘JacobiEigen’ version ‘0.3-3’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘ggplot2’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# jstor
+
+
+
+* Version: 0.3.8
+* Source code: https://github.com/cran/jstor
+* URL: https://github.com/ropensci/jstor, https://docs.ropensci.org/jstor
+* BugReports: https://github.com/ropensci/jstor/issues
+* Date/Publication: 2020-04-03 14:10:23 UTC
+* Number of recursive dependencies: 68
+
+Run `cloud_details(, "jstor")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/jstor/old/jstor.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘jstor/DESCRIPTION’ ... OK
+* this is package ‘jstor’ version ‘0.3.8’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘jstor’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking R/sysdata.rda ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ...
+
+
+
+
+
+```
+# MarketMatching
+
+
+
+* Version: 1.1.2
+* Source code: https://github.com/cran/MarketMatching
+* Date/Publication: 2019-07-03 17:10:03 UTC
+* Number of recursive dependencies: 79
+
+Run `cloud_details(, "MarketMatching")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/MarketMatching/new/MarketMatching.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘MarketMatching/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘MarketMatching’ version ‘1.1.2’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘bsts’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/MarketMatching/old/MarketMatching.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘MarketMatching/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘MarketMatching’ version ‘1.1.2’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘bsts’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# MazamaSpatialUtils
+
+
+
+* Version: 0.6.4
+* Source code: https://github.com/cran/MazamaSpatialUtils
+* URL: https://github.com/MazamaScience/MazamaSpatialUtils
+* BugReports: https://github.com/MazamaScience/MazamaSpatialUtils/issues
+* Date/Publication: 2019-09-28 19:40:03 UTC
+* Number of recursive dependencies: 98
+
+Run `cloud_details(, "MazamaSpatialUtils")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/MazamaSpatialUtils/new/MazamaSpatialUtils.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘MazamaSpatialUtils/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘MazamaSpatialUtils’ version ‘0.6.4’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘rmapshaper’
+
+Package suggested but not available: ‘readr’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/MazamaSpatialUtils/old/MazamaSpatialUtils.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘MazamaSpatialUtils/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘MazamaSpatialUtils’ version ‘0.6.4’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘rmapshaper’
+
+Package suggested but not available: ‘readr’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# MBNMAtime
+
+
+
+* Version: 0.1.3
+* Source code: https://github.com/cran/MBNMAtime
+* URL: https://doi.org/10.1002/jrsm.1351
+* Date/Publication: 2020-03-04 15:50:06 UTC
+* Number of recursive dependencies: 81
+
+Run `cloud_details(, "MBNMAtime")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/MBNMAtime/new/MBNMAtime.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘MBNMAtime/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘MBNMAtime’ version ‘0.1.3’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘ggplot2’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/MBNMAtime/old/MBNMAtime.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘MBNMAtime/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘MBNMAtime’ version ‘0.1.3’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘ggplot2’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# MetaboList
+
+
+
+* Version: 2.0
+* Source code: https://github.com/cran/MetaboList
+* Date/Publication: 2019-08-22 16:40:02 UTC
+* Number of recursive dependencies: 65
+
+Run `cloud_details(, "MetaboList")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+
+
+
+
+
+
+```
+### CRAN
+
+```
+
+
+
+
+
+
+```
+# MixMatrix
+
+
+
+* Version: 0.2.4
+* Source code: https://github.com/cran/MixMatrix
+* URL: http://github.com/gzt/MixMatrix/, https://gzt.github.io/MixMatrix/
+* BugReports: http://github.com/gzt/MixMatrix/issues
+* Date/Publication: 2019-11-14 22:30:03 UTC
+* Number of recursive dependencies: 78
+
+Run `cloud_details(, "MixMatrix")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/MixMatrix/new/MixMatrix.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘MixMatrix/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘MixMatrix’ version ‘0.2.4’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘MixMatrix’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking line endings in C/C++/Fortran sources/headers ... OK
+* checking line endings in Makefiles ... OK
+* checking compilation flags in Makevars ... OK
+* checking for GNU extensions in Makefiles ... OK
+* checking for portable use of $(BLAS_LIBS) and $(LAPACK_LIBS) ... OK
+* checking compiled code ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘discriminant-analysis.Rmd’using ‘UTF-8’... OK
+ ‘matrix-t-estimation.Rmd’using ‘UTF-8’... OK
+ ‘matrixnormal.Rmd’using ‘UTF-8’... OK
+ ‘mixturemodel.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: OK
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/MixMatrix/old/MixMatrix.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘MixMatrix/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘MixMatrix’ version ‘0.2.4’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘MixMatrix’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking line endings in C/C++/Fortran sources/headers ... OK
+* checking line endings in Makefiles ... OK
+* checking compilation flags in Makevars ... OK
+* checking for GNU extensions in Makefiles ... OK
+* checking for portable use of $(BLAS_LIBS) and $(LAPACK_LIBS) ... OK
+* checking compiled code ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘discriminant-analysis.Rmd’using ‘UTF-8’... OK
+ ‘matrix-t-estimation.Rmd’using ‘UTF-8’... OK
+ ‘matrixnormal.Rmd’using ‘UTF-8’... OK
+ ‘mixturemodel.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: OK
+
+
+
+
+
+
+```
+# MLRShiny
+
+
+
+* Version: 0.1.0
+* Source code: https://github.com/cran/MLRShiny
+* Date/Publication: 2019-04-22 19:20:03 UTC
+* Number of recursive dependencies: 99
+
+Run `cloud_details(, "MLRShiny")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/MLRShiny/new/MLRShiny.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘MLRShiny/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘MLRShiny’ version ‘0.1.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘MLRShiny’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... NOTE
+Namespaces in Imports field not imported from:
+ ‘QuantPsyc’ ‘corrgram’ ‘dplyr’ ‘forecast’ ‘psych’ ‘shinyAce’
+ All declared Imports should be used.
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking examples ... OK
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/MLRShiny/old/MLRShiny.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘MLRShiny/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘MLRShiny’ version ‘0.1.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘MLRShiny’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... NOTE
+Namespaces in Imports field not imported from:
+ ‘QuantPsyc’ ‘corrgram’ ‘dplyr’ ‘forecast’ ‘psych’ ‘shinyAce’
+ All declared Imports should be used.
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking examples ... OK
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+
+```
+# nesRdata
+
+
+
+* Version: 0.3.1
+* Source code: https://github.com/cran/nesRdata
+* URL: https://github.com/jsta/nesRdata
+* BugReports: https://github.com/jsta/nesRdata/issues
+* Date/Publication: 2020-04-30 17:20:02 UTC
+* Number of recursive dependencies: 66
+
+Run `cloud_details(, "nesRdata")` for more info
+
+
+
+## In both
+
+* checking whether package ‘nesRdata’ can be installed ... ERROR
+ ```
+ Installation failed.
+ See ‘/tmp/workdir/nesRdata/new/nesRdata.Rcheck/00install.out’ for details.
+ ```
+
+## Installation
+
+### Devel
+
+```
+* installing *source* package ‘nesRdata’ ...
+** package ‘nesRdata’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** data
+*** moving datasets to lazyload DB
+** inst
+** byte-compile and prepare package for lazy loading
+Error in dyn.load(file, DLLpath = DLLpath, ...) :
+ unable to load shared object '/opt/R/3.6.3/lib/R/library/redland/libs/redland.so':
+ librdf.so.0: cannot open shared object file: No such file or directory
+Calls: ... namespaceImport -> loadNamespace -> library.dynam -> dyn.load
+Execution halted
+ERROR: lazy loading failed for package ‘nesRdata’
+* removing ‘/tmp/workdir/nesRdata/new/nesRdata.Rcheck/nesRdata’
+
+```
+### CRAN
+
+```
+* installing *source* package ‘nesRdata’ ...
+** package ‘nesRdata’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** data
+*** moving datasets to lazyload DB
+** inst
+** byte-compile and prepare package for lazy loading
+Error in dyn.load(file, DLLpath = DLLpath, ...) :
+ unable to load shared object '/opt/R/3.6.3/lib/R/library/redland/libs/redland.so':
+ librdf.so.0: cannot open shared object file: No such file or directory
+Calls: ... namespaceImport -> loadNamespace -> library.dynam -> dyn.load
+Execution halted
+ERROR: lazy loading failed for package ‘nesRdata’
+* removing ‘/tmp/workdir/nesRdata/old/nesRdata.Rcheck/nesRdata’
+
+```
+# NetworkExtinction
+
+
+
+* Version: 0.1.1
+* Source code: https://github.com/cran/NetworkExtinction
+* URL: https://derek-corcoran-barrios.github.io/NetworkExtintion/
+* Date/Publication: 2019-10-27 22:20:02 UTC
+* Number of recursive dependencies: 85
+
+Run `cloud_details(, "NetworkExtinction")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/NetworkExtinction/new/NetworkExtinction.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘NetworkExtinction/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘NetworkExtinction’ version ‘0.1.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/NetworkExtinction/old/NetworkExtinction.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘NetworkExtinction/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘NetworkExtinction’ version ‘0.1.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# OncoBayes2
+
+
+
+* Version: 0.6-5
+* Source code: https://github.com/cran/OncoBayes2
+* Date/Publication: 2020-05-07 14:50:02 UTC
+* Number of recursive dependencies: 82
+
+Run `cloud_details(, "OncoBayes2")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/OncoBayes2/new/OncoBayes2.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘OncoBayes2/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘OncoBayes2’ version ‘0.6-5’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘OncoBayes2’ can be installed ... OK
+* checking installed package size ... NOTE
+ installed size is 42.7Mb
+ sub-directories of 1Mb or more:
+ libs 41.7Mb
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... WARNING
+Loading required package: Rcpp
+Error: package or namespace load failed for ‘OncoBayes2’ in loadNamespace(j <- i[[1L]], c(lib.loc, .libPaths()), versionCheck = vI[[j]]):
+ there is no package called ‘cli’
+Execution halted
+
+It looks like this package has a loading problem when not on .libPaths:
+see the messages for details.
+* checking dependencies in R code ... NOTE
+Namespaces in Imports field not imported from:
+ ‘bayesplot’ ‘ggplot2’
+ All declared Imports should be used.
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking R/sysdata.rda ... OK
+* checking line endings in shell scripts ... OK
+* checking line endings in C/C++/Fortran sources/headers ... OK
+* checking line endings in Makefiles ... OK
+* checking compilation flags in Makevars ... OK
+* checking for GNU extensions in Makefiles ... NOTE
+GNU make is a SystemRequirements.
+* checking for portable use of $(BLAS_LIBS) and $(LAPACK_LIBS) ... OK
+* checking compiled code ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... ERROR
+Running examples in ‘OncoBayes2-Ex.R’ failed
+The error most likely occurred in:
+
+> ### Name: posterior_predict.blrmfit
+> ### Title: Posterior of predictive
+> ### Aliases: posterior_predict.blrmfit posterior_predict
+>
+> ### ** Examples
+>
+> ## Setting up dummy sampling for fast execution of example
+> ## Please use 4 chains and 100x more warmup & iter in practice
+> .user_mc_options <- options(OncoBayes2.MC.warmup=10, OncoBayes2.MC.iter=20, OncoBayes2.MC.chains=1)
+>
+>
+> example_model("single_agent")
+Running single_agent example:
+
+ ## Example from Neuenschwander, B., et al. (2009). Stats in Medicine
+
+ num_comp <- 1 # one investigational drug
+ num_inter <- 0 # no drug-drug interactions need to be modeled
+ num_groups <- nlevels(hist_SA$group_id) # no stratification needed
+ num_strata <- 1 # no stratification needed
+
+
+ dref <- 50
+
+ ## Since there is no prior information the hierarchical model
+ ## is not used in this example by setting tau to (almost) 0.
+ blrmfit <- blrm_exnex(
+ cbind(num_toxicities, num_patients - num_toxicities) ~
+ 1 + log(drug_A / dref) |
+ 0 |
+ group_id,
+ data = hist_SA,
+ prior_EX_mu_mean_comp = matrix(
+ c(logit(1/2), # mean of intercept on logit scale
+ log(1)), # mean of log-slope on logit scale
+ nrow = num_comp,
+ ncol = 2
+ ),
+ prior_EX_mu_sd_comp = matrix(
+ c(2, # sd of intercept
+ 1), # sd of log-slope
+ nrow = num_comp,
+ ncol = 2
+ ),
+ ## Here we take tau as known and as zero.
+ ## This disables the hierarchical prior which is
+ ## not required in this example as we analyze a
+ ## single trial.
+ prior_EX_tau_mean_comp = matrix(
+ c(0, 0),
+ nrow = num_comp,
+ ncol = 2
+ ),
+ prior_EX_tau_sd_comp = matrix(
+ c(1, 1),
+ nrow = num_comp,
+ ncol = 2
+ ),
+ prior_EX_prob_comp = matrix(1, nrow = num_comp, ncol = 1),
+ prior_tau_dist = 0,
+ prior_PD = FALSE
+ )
+
+Warning: The largest R-hat is NA, indicating chains have not mixed.
+Running the chains for more iterations may help. See
+http://mc-stan.org/misc/warnings.html#r-hat
+Warning: Bulk Effective Samples Size (ESS) is too low, indicating posterior means and medians may be unreliable.
+Running the chains for more iterations may help. See
+http://mc-stan.org/misc/warnings.html#bulk-ess
+Warning: Tail Effective Samples Size (ESS) is too low, indicating posterior variances and tail quantiles may be unreliable.
+Running the chains for more iterations may help. See
+http://mc-stan.org/misc/warnings.html#tail-ess
+>
+> post_pred <- posterior_predict(blrmfit)
+> ## turn DLT counts into DLT rates
+> post_pred_rate <- sweep(post_pred, 2, hist_SA$num_patients, "/")
+>
+> library(bayesplot)
+This is bayesplot version 1.7.2
+- Online documentation and vignettes at mc-stan.org/bayesplot
+- bayesplot theme set to bayesplot::theme_default()
+ * Does _not_ affect other ggplot2 plots
+ * See ?bayesplot_theme_set for details on theme setting
+> library(ggplot2)
+>
+> ## compare posterior predictive of the model for the response rates
+> ## with observed data
+> with(hist_SA,
++ ppc_intervals(num_toxicities / num_patients, post_pred_rate, x=drug_A, prob_outer=0.95)) +
++ xlab("Dose [mg]")
+Error in loadNamespace(name) : there is no package called ‘labeling’
+Calls: ... loadNamespace -> withRestarts -> withOneRestart -> doWithOneRestart
+Execution halted
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘introduction.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: 1 ERROR, 1 WARNING, 3 NOTEs
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/OncoBayes2/old/OncoBayes2.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘OncoBayes2/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘OncoBayes2’ version ‘0.6-5’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘OncoBayes2’ can be installed ... OK
+* checking installed package size ... NOTE
+ installed size is 42.7Mb
+ sub-directories of 1Mb or more:
+ libs 41.7Mb
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... WARNING
+Loading required package: Rcpp
+Error: package or namespace load failed for ‘OncoBayes2’ in loadNamespace(j <- i[[1L]], c(lib.loc, .libPaths()), versionCheck = vI[[j]]):
+ there is no package called ‘cli’
+Execution halted
+
+It looks like this package has a loading problem when not on .libPaths:
+see the messages for details.
+* checking dependencies in R code ... NOTE
+Namespaces in Imports field not imported from:
+ ‘bayesplot’ ‘ggplot2’
+ All declared Imports should be used.
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking R/sysdata.rda ... OK
+* checking line endings in shell scripts ... OK
+* checking line endings in C/C++/Fortran sources/headers ... OK
+* checking line endings in Makefiles ... OK
+* checking compilation flags in Makevars ... OK
+* checking for GNU extensions in Makefiles ... NOTE
+GNU make is a SystemRequirements.
+* checking for portable use of $(BLAS_LIBS) and $(LAPACK_LIBS) ... OK
+* checking compiled code ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... ERROR
+Running examples in ‘OncoBayes2-Ex.R’ failed
+The error most likely occurred in:
+
+> ### Name: posterior_predict.blrmfit
+> ### Title: Posterior of predictive
+> ### Aliases: posterior_predict.blrmfit posterior_predict
+>
+> ### ** Examples
+>
+> ## Setting up dummy sampling for fast execution of example
+> ## Please use 4 chains and 100x more warmup & iter in practice
+> .user_mc_options <- options(OncoBayes2.MC.warmup=10, OncoBayes2.MC.iter=20, OncoBayes2.MC.chains=1)
+>
+>
+> example_model("single_agent")
+Running single_agent example:
+
+ ## Example from Neuenschwander, B., et al. (2009). Stats in Medicine
+
+ num_comp <- 1 # one investigational drug
+ num_inter <- 0 # no drug-drug interactions need to be modeled
+ num_groups <- nlevels(hist_SA$group_id) # no stratification needed
+ num_strata <- 1 # no stratification needed
+
+
+ dref <- 50
+
+ ## Since there is no prior information the hierarchical model
+ ## is not used in this example by setting tau to (almost) 0.
+ blrmfit <- blrm_exnex(
+ cbind(num_toxicities, num_patients - num_toxicities) ~
+ 1 + log(drug_A / dref) |
+ 0 |
+ group_id,
+ data = hist_SA,
+ prior_EX_mu_mean_comp = matrix(
+ c(logit(1/2), # mean of intercept on logit scale
+ log(1)), # mean of log-slope on logit scale
+ nrow = num_comp,
+ ncol = 2
+ ),
+ prior_EX_mu_sd_comp = matrix(
+ c(2, # sd of intercept
+ 1), # sd of log-slope
+ nrow = num_comp,
+ ncol = 2
+ ),
+ ## Here we take tau as known and as zero.
+ ## This disables the hierarchical prior which is
+ ## not required in this example as we analyze a
+ ## single trial.
+ prior_EX_tau_mean_comp = matrix(
+ c(0, 0),
+ nrow = num_comp,
+ ncol = 2
+ ),
+ prior_EX_tau_sd_comp = matrix(
+ c(1, 1),
+ nrow = num_comp,
+ ncol = 2
+ ),
+ prior_EX_prob_comp = matrix(1, nrow = num_comp, ncol = 1),
+ prior_tau_dist = 0,
+ prior_PD = FALSE
+ )
+
+Warning: The largest R-hat is NA, indicating chains have not mixed.
+Running the chains for more iterations may help. See
+http://mc-stan.org/misc/warnings.html#r-hat
+Warning: Bulk Effective Samples Size (ESS) is too low, indicating posterior means and medians may be unreliable.
+Running the chains for more iterations may help. See
+http://mc-stan.org/misc/warnings.html#bulk-ess
+Warning: Tail Effective Samples Size (ESS) is too low, indicating posterior variances and tail quantiles may be unreliable.
+Running the chains for more iterations may help. See
+http://mc-stan.org/misc/warnings.html#tail-ess
+>
+> post_pred <- posterior_predict(blrmfit)
+> ## turn DLT counts into DLT rates
+> post_pred_rate <- sweep(post_pred, 2, hist_SA$num_patients, "/")
+>
+> library(bayesplot)
+This is bayesplot version 1.7.2
+- Online documentation and vignettes at mc-stan.org/bayesplot
+- bayesplot theme set to bayesplot::theme_default()
+ * Does _not_ affect other ggplot2 plots
+ * See ?bayesplot_theme_set for details on theme setting
+> library(ggplot2)
+>
+> ## compare posterior predictive of the model for the response rates
+> ## with observed data
+> with(hist_SA,
++ ppc_intervals(num_toxicities / num_patients, post_pred_rate, x=drug_A, prob_outer=0.95)) +
++ xlab("Dose [mg]")
+Error in loadNamespace(name) : there is no package called ‘labeling’
+Calls: ... loadNamespace -> withRestarts -> withOneRestart -> doWithOneRestart
+Execution halted
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘introduction.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: 1 ERROR, 1 WARNING, 3 NOTEs
+
+
+
+
+
+
+```
+# PAutilities
+
+
+
+* Version: 1.0.1
+* Source code: https://github.com/cran/PAutilities
+* URL: https://github.com/paulhibbing/PAutilities
+* BugReports: https://github.com/paulhibbing/PAutilities/issues
+* Date/Publication: 2020-05-17 05:00:27 UTC
+* Number of recursive dependencies: 86
+
+Run `cloud_details(, "PAutilities")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/PAutilities/new/PAutilities.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘PAutilities/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘PAutilities’ version ‘1.0.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘PAutilities’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking R/sysdata.rda ... OK
+* checking line endings in C/C++/Fortran sources/headers ... OK
+* checking compiled code ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘tpm.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: OK
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/PAutilities/old/PAutilities.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘PAutilities/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘PAutilities’ version ‘1.0.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘PAutilities’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking R/sysdata.rda ... OK
+* checking line endings in C/C++/Fortran sources/headers ... OK
+* checking compiled code ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘tpm.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: OK
+
+
+
+
+
+
+```
+# PKNCA
+
+
+
+* Version: 0.9.3
+* Source code: https://github.com/cran/PKNCA
+* URL: https://github.com/billdenney/pknca
+* BugReports: https://github.com/billdenney/pknca/issues
+* Date/Publication: 2020-04-12 20:00:02 UTC
+* Number of recursive dependencies: 74
+
+Run `cloud_details(, "PKNCA")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/PKNCA/new/PKNCA.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘PKNCA/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘PKNCA’ version ‘0.9.3’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Packages suggested but not available: 'ggplot2', 'rmarkdown'
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/PKNCA/old/PKNCA.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘PKNCA/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘PKNCA’ version ‘0.9.3’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Packages suggested but not available: 'ggplot2', 'rmarkdown'
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# PKPDmisc
+
+
+
+* Version: 2.1.2
+* Source code: https://github.com/cran/PKPDmisc
+* URL: https://github.com/metrumresearchgroup/PKPDmisc
+* BugReports: https://github.com/metrumresearchgroup/PKPDmisc/issues
+* Date/Publication: 2020-04-07 15:40:16 UTC
+* Number of recursive dependencies: 70
+
+Run `cloud_details(, "PKPDmisc")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+
+
+
+
+
+
+```
+### CRAN
+
+```
+
+
+
+
+
+
+```
+# PML
+
+
+
+* Version: 1.2
+* Source code: https://github.com/cran/PML
+* URL: https://github.com/xinyue-L/PML
+* BugReports: https://github.com/xinyue-L/PML/issues
+* Date/Publication: 2020-02-11 12:20:02 UTC
+* Number of recursive dependencies: 78
+
+Run `cloud_details(, "PML")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/PML/new/PML.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘PML/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘PML’ version ‘1.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘rbokeh’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/PML/old/PML.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘PML/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘PML’ version ‘1.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘rbokeh’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# PupilPre
+
+
+
+* Version: 0.6.2
+* Source code: https://github.com/cran/PupilPre
+* Date/Publication: 2020-03-10 05:20:02 UTC
+* Number of recursive dependencies: 78
+
+Run `cloud_details(, "PupilPre")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/PupilPre/new/PupilPre.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘PupilPre/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘PupilPre’ version ‘0.6.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/PupilPre/old/PupilPre.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘PupilPre/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘PupilPre’ version ‘0.6.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# R2019nCoV
+
+
+
+* Version: 0.1.0
+* Source code: https://github.com/cran/R2019nCoV
+* Date/Publication: 2020-02-29 13:40:09 UTC
+* Number of recursive dependencies: 72
+
+Run `cloud_details(, "R2019nCoV")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+
+
+
+
+
+
+```
+### CRAN
+
+```
+
+
+
+
+
+
+```
+# RClickhouse
+
+
+
+* Version: 0.5.2
+* Source code: https://github.com/cran/RClickhouse
+* URL: https://github.com/IMSMWU/RClickhouse
+* BugReports: https://github.com/IMSMWU/RClickhouse/issues
+* Date/Publication: 2020-03-06 15:30:02 UTC
+* Number of recursive dependencies: 41
+
+Run `cloud_details(, "RClickhouse")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/RClickhouse/new/RClickhouse.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘RClickhouse/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘RClickhouse’ version ‘0.5.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘dbplyr’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/RClickhouse/old/RClickhouse.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘RClickhouse/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘RClickhouse’ version ‘0.5.2’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘dbplyr’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# RCzechia
+
+
+
+* Version: 1.5.0
+* Source code: https://github.com/cran/RCzechia
+* URL: https://github.com/jlacko/RCzechia
+* BugReports: https://github.com/jlacko/RCzechia/issues
+* Date/Publication: 2020-05-04 11:40:12 UTC
+* Number of recursive dependencies: 111
+
+Run `cloud_details(, "RCzechia")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/RCzechia/new/RCzechia.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘RCzechia/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘RCzechia’ version ‘1.5.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘ggplot2’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/RCzechia/old/RCzechia.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘RCzechia/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘RCzechia’ version ‘1.5.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘ggplot2’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# rdflib
+
+
+
+* Version: 0.2.3
+* Source code: https://github.com/cran/rdflib
+* URL: https://github.com/ropensci/rdflib
+* BugReports: https://github.com/ropensci/rdflib/issues
+* Date/Publication: 2020-01-10 04:10:02 UTC
+* Number of recursive dependencies: 80
+
+Run `cloud_details(, "rdflib")` for more info
+
+
+
+## In both
+
+* checking whether package ‘rdflib’ can be installed ... ERROR
+ ```
+ Installation failed.
+ See ‘/tmp/workdir/rdflib/new/rdflib.Rcheck/00install.out’ for details.
+ ```
+
+## Installation
+
+### Devel
+
+```
+* installing *source* package ‘rdflib’ ...
+** package ‘rdflib’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** inst
+** byte-compile and prepare package for lazy loading
+Error in dyn.load(file, DLLpath = DLLpath, ...) :
+ unable to load shared object '/opt/R/3.6.3/lib/R/library/redland/libs/redland.so':
+ librdf.so.0: cannot open shared object file: No such file or directory
+Calls: ... asNamespace -> loadNamespace -> library.dynam -> dyn.load
+Execution halted
+ERROR: lazy loading failed for package ‘rdflib’
+* removing ‘/tmp/workdir/rdflib/new/rdflib.Rcheck/rdflib’
+
+```
+### CRAN
+
+```
+* installing *source* package ‘rdflib’ ...
+** package ‘rdflib’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** inst
+** byte-compile and prepare package for lazy loading
+Error in dyn.load(file, DLLpath = DLLpath, ...) :
+ unable to load shared object '/opt/R/3.6.3/lib/R/library/redland/libs/redland.so':
+ librdf.so.0: cannot open shared object file: No such file or directory
+Calls: ... asNamespace -> loadNamespace -> library.dynam -> dyn.load
+Execution halted
+ERROR: lazy loading failed for package ‘rdflib’
+* removing ‘/tmp/workdir/rdflib/old/rdflib.Rcheck/rdflib’
+
+```
+# RDML
+
+
+
+* Version: 1.0
+* Source code: https://github.com/cran/RDML
+* URL: https://github.com/kablag/RDML
+* Date/Publication: 2019-06-25 11:40:10 UTC
+* Number of recursive dependencies: 122
+
+Run `cloud_details(, "RDML")` for more info
+
+
+
+## In both
+
+* checking whether package ‘RDML’ can be installed ... ERROR
+ ```
+ Installation failed.
+ See ‘/tmp/workdir/RDML/new/RDML.Rcheck/00install.out’ for details.
+ ```
+
+## Installation
+
+### Devel
+
+```
+* installing *source* package ‘RDML’ ...
+** package ‘RDML’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** inst
+** byte-compile and prepare package for lazy loading
+Error in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]) :
+ there is no package called ‘stringi’
+Calls: ... loadNamespace -> withRestarts -> withOneRestart -> doWithOneRestart
+Execution halted
+ERROR: lazy loading failed for package ‘RDML’
+* removing ‘/tmp/workdir/RDML/new/RDML.Rcheck/RDML’
+
+```
+### CRAN
+
+```
+* installing *source* package ‘RDML’ ...
+** package ‘RDML’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** inst
+** byte-compile and prepare package for lazy loading
+Error in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]) :
+ there is no package called ‘stringi’
+Calls: ... loadNamespace -> withRestarts -> withOneRestart -> doWithOneRestart
+Execution halted
+ERROR: lazy loading failed for package ‘RDML’
+* removing ‘/tmp/workdir/RDML/old/RDML.Rcheck/RDML’
+
+```
+# SDLfilter
+
+
+
+* Version: 2.0.0
+* Source code: https://github.com/cran/SDLfilter
+* URL: https://github.com/TakahiroShimada/SDLfilter
+* BugReports: https://github.com/TakahiroShimada/SDLfilter/issues
+* Date/Publication: 2020-05-04 13:40:06 UTC
+* Number of recursive dependencies: 116
+
+Run `cloud_details(, "SDLfilter")` for more info
+
+
+
+## In both
+
+* checking whether package ‘SDLfilter’ can be installed ... ERROR
+ ```
+ Installation failed.
+ See ‘/tmp/workdir/SDLfilter/new/SDLfilter.Rcheck/00install.out’ for details.
+ ```
+
+## Installation
+
+### Devel
+
+```
+* installing *source* package ‘SDLfilter’ ...
+** package ‘SDLfilter’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** data
+*** moving datasets to lazyload DB
+** inst
+** byte-compile and prepare package for lazy loading
+Error in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]) :
+ there is no package called ‘FNN’
+Calls: ... loadNamespace -> withRestarts -> withOneRestart -> doWithOneRestart
+Execution halted
+ERROR: lazy loading failed for package ‘SDLfilter’
+* removing ‘/tmp/workdir/SDLfilter/new/SDLfilter.Rcheck/SDLfilter’
+
+```
+### CRAN
+
+```
+* installing *source* package ‘SDLfilter’ ...
+** package ‘SDLfilter’ successfully unpacked and MD5 sums checked
+** using staged installation
+** R
+** data
+*** moving datasets to lazyload DB
+** inst
+** byte-compile and prepare package for lazy loading
+Error in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]) :
+ there is no package called ‘FNN’
+Calls: ... loadNamespace -> withRestarts -> withOneRestart -> doWithOneRestart
+Execution halted
+ERROR: lazy loading failed for package ‘SDLfilter’
+* removing ‘/tmp/workdir/SDLfilter/old/SDLfilter.Rcheck/SDLfilter’
+
+```
+# SimDesign
+
+
+
+* Version: 2.0.1
+* Source code: https://github.com/cran/SimDesign
+* URL: https://github.com/philchalmers/SimDesign, https://github.com/philchalmers/SimDesign/wiki
+* Date/Publication: 2020-01-20 19:00:02 UTC
+* Number of recursive dependencies: 88
+
+Run `cloud_details(, "SimDesign")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/SimDesign/new/SimDesign.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘SimDesign/DESCRIPTION’ ... OK
+* this is package ‘SimDesign’ version ‘2.0.1’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘doMPI’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/SimDesign/old/SimDesign.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘SimDesign/DESCRIPTION’ ... OK
+* this is package ‘SimDesign’ version ‘2.0.1’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘doMPI’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# SupMZ
+
+
+
+* Version: 0.2.0
+* Source code: https://github.com/cran/SupMZ
+* URL: https://github.com/myaseen208/SupMZ, https://myaseen208.github.io/SupMZ/
+* Date/Publication: 2020-01-16 15:40:02 UTC
+* Number of recursive dependencies: 36
+
+Run `cloud_details(, "SupMZ")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/SupMZ/new/SupMZ.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘SupMZ/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘SupMZ’ version ‘0.2.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘SupMZ’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking examples ... OK
+* DONE
+Status: OK
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/SupMZ/old/SupMZ.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘SupMZ/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘SupMZ’ version ‘0.2.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘SupMZ’ can be installed ... OK
+* checking installed package size ... OK
+* checking package directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... WARNING
+Error: package or namespace load failed for ‘SupMZ’ in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]):
+ there is no package called ‘lifecycle’
+Execution halted
+
+It looks like this package has a loading problem when not on .libPaths:
+see the messages for details.
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking examples ... OK
+* DONE
+Status: 1 WARNING
+
+
+
+
+
+
+```
+# Tcomp
+
+
+
+* Version: 1.0.1
+* Source code: https://github.com/cran/Tcomp
+* BugReports: https://github.com/ellisp/Tcomp-r-package/issues
+* Date/Publication: 2018-06-05 22:40:16 UTC
+* Number of recursive dependencies: 80
+
+Run `cloud_details(, "Tcomp")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/Tcomp/new/Tcomp.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘Tcomp/DESCRIPTION’ ... OK
+* this is package ‘Tcomp’ version ‘1.0.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘Tcomp’ can be installed ... ERROR
+Installation failed.
+See ‘/tmp/workdir/Tcomp/new/Tcomp.Rcheck/00install.out’ for details.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/Tcomp/old/Tcomp.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘Tcomp/DESCRIPTION’ ... OK
+* this is package ‘Tcomp’ version ‘1.0.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘Tcomp’ can be installed ... ERROR
+Installation failed.
+See ‘/tmp/workdir/Tcomp/old/Tcomp.Rcheck/00install.out’ for details.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# trackdf
+
+
+
+* Version: 0.2.1
+* Source code: https://github.com/cran/trackdf
+* URL: https://swarm-lab.github.io/trackdf/, https://github.com/swarm-lab/trackdf
+* BugReports: https://github.com/swarm-lab/trackdf/issues
+* Date/Publication: 2019-08-04 14:20:02 UTC
+* Number of recursive dependencies: 130
+
+Run `cloud_details(, "trackdf")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/trackdf/new/trackdf.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘trackdf/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘trackdf’ version ‘0.2.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘moveVis’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/trackdf/old/trackdf.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘trackdf/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘trackdf’ version ‘0.2.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘moveVis’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# trackr
+
+
+
+* Version: 0.10.6
+* Source code: https://github.com/cran/trackr
+* Date/Publication: 2020-02-29 05:40:07 UTC
+* Number of recursive dependencies: 106
+
+Run `cloud_details(, "trackr")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/trackr/new/trackr.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘trackr/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘trackr’ version ‘0.10.6’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Packages required but not available:
+ 'histry', 'CodeDepends', 'rsolr', 'roprov'
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/trackr/old/trackr.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘trackr/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘trackr’ version ‘0.10.6’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Packages required but not available:
+ 'histry', 'CodeDepends', 'rsolr', 'roprov'
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# TrafficBDE
+
+
+
+* Version: 0.1.0
+* Source code: https://github.com/cran/TrafficBDE
+* URL: https://github.com/okgreece/TrafficBDE
+* BugReports: https://github.com/okgreece/TrafficBDE/issues
+* Date/Publication: 2018-03-01 16:23:44 UTC
+* Number of recursive dependencies: 94
+
+Run `cloud_details(, "TrafficBDE")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/TrafficBDE/new/TrafficBDE.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘TrafficBDE/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘TrafficBDE’ version ‘0.1.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘ggplot2’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/TrafficBDE/old/TrafficBDE.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘TrafficBDE/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘TrafficBDE’ version ‘0.1.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘ggplot2’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# UniprotR
+
+
+
+* Version: 1.3.0
+* Source code: https://github.com/cran/UniprotR
+* URL: https://github.com/Proteomicslab57357/UniprotR
+* BugReports: https://github.com/Proteomicslab57357/UniprotR/issues
+* Date/Publication: 2020-05-26 22:40:08 UTC
+* Number of recursive dependencies: 135
+
+Run `cloud_details(, "UniprotR")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/UniprotR/new/UniprotR.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘UniprotR/DESCRIPTION’ ... OK
+* this is package ‘UniprotR’ version ‘1.3.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/UniprotR/old/UniprotR.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘UniprotR/DESCRIPTION’ ... OK
+* this is package ‘UniprotR’ version ‘1.3.0’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package required but not available: ‘ggplot2’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+# VarSelLCM
+
+
+
+* Version: 2.1.3
+* Source code: https://github.com/cran/VarSelLCM
+* URL: http://varsellcm.r-forge.r-project.org/
+* Date/Publication: 2018-08-29 10:24:28 UTC
+* Number of recursive dependencies: 73
+
+Run `cloud_details(, "VarSelLCM")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/VarSelLCM/new/VarSelLCM.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘VarSelLCM/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘VarSelLCM’ version ‘2.1.3’
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘VarSelLCM’ can be installed ... OK
+* checking installed package size ... NOTE
+ installed size is 16.5Mb
+ sub-directories of 1Mb or more:
+ libs 15.7Mb
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking line endings in C/C++/Fortran sources/headers ... NOTE
+Found the following sources/headers not terminated with a newline:
+ inst/include/Algorithm.h
+ inst/include/AlgorithmCategorical.h
+ inst/include/AlgorithmContinuous.h
+ inst/include/AlgorithmInteger.h
+ inst/include/AlgorithmMixed.h
+ inst/include/Data.h
+ inst/include/DataCategorical.h
+ inst/include/DataContinuous.h
+ inst/include/DataInteger.h
+ inst/include/DataMixed.h
+ inst/include/Param.h
+ inst/include/ParamCategorical.h
+ inst/include/ParamContinuous.h
+ inst/include/ParamInteger.h
+ inst/include/ParamMixed.h
+ inst/include/XEM.h
+ inst/include/XEMCategorical.h
+ inst/include/XEMContinuous.h
+ inst/include/XEMInteger.h
+ inst/include/XEMMixed.h
+ inst/include/XEMPen.h
+Some compilers warn on such files.
+* checking line endings in Makefiles ... OK
+* checking compilation flags in Makevars ... OK
+* checking for GNU extensions in Makefiles ... OK
+* checking for portable use of $(BLAS_LIBS) and $(LAPACK_LIBS) ... OK
+* checking compiled code ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘VarSelLCM.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: 2 NOTEs
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/VarSelLCM/old/VarSelLCM.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘VarSelLCM/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘VarSelLCM’ version ‘2.1.3’
+* checking package namespace information ... OK
+* checking package dependencies ... OK
+* checking if this is a source package ... OK
+* checking if there is a namespace ... OK
+* checking for executable files ... OK
+* checking for hidden files and directories ... OK
+* checking for portable file names ... OK
+* checking for sufficient/correct file permissions ... OK
+* checking whether package ‘VarSelLCM’ can be installed ... OK
+* checking installed package size ... NOTE
+ installed size is 16.5Mb
+ sub-directories of 1Mb or more:
+ libs 15.7Mb
+* checking package directory ... OK
+* checking ‘build’ directory ... OK
+* checking DESCRIPTION meta-information ... OK
+* checking top-level files ... OK
+* checking for left-over files ... OK
+* checking index information ... OK
+* checking package subdirectories ... OK
+* checking R files for non-ASCII characters ... OK
+* checking R files for syntax errors ... OK
+* checking whether the package can be loaded ... OK
+* checking whether the package can be loaded with stated dependencies ... OK
+* checking whether the package can be unloaded cleanly ... OK
+* checking whether the namespace can be loaded with stated dependencies ... OK
+* checking whether the namespace can be unloaded cleanly ... OK
+* checking loading without being on the library search path ... OK
+* checking dependencies in R code ... OK
+* checking S3 generic/method consistency ... OK
+* checking replacement functions ... OK
+* checking foreign function calls ... OK
+* checking R code for possible problems ... OK
+* checking Rd files ... OK
+* checking Rd metadata ... OK
+* checking Rd cross-references ... OK
+* checking for missing documentation entries ... OK
+* checking for code/documentation mismatches ... OK
+* checking Rd \usage sections ... OK
+* checking Rd contents ... OK
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking line endings in C/C++/Fortran sources/headers ... NOTE
+Found the following sources/headers not terminated with a newline:
+ inst/include/Algorithm.h
+ inst/include/AlgorithmCategorical.h
+ inst/include/AlgorithmContinuous.h
+ inst/include/AlgorithmInteger.h
+ inst/include/AlgorithmMixed.h
+ inst/include/Data.h
+ inst/include/DataCategorical.h
+ inst/include/DataContinuous.h
+ inst/include/DataInteger.h
+ inst/include/DataMixed.h
+ inst/include/Param.h
+ inst/include/ParamCategorical.h
+ inst/include/ParamContinuous.h
+ inst/include/ParamInteger.h
+ inst/include/ParamMixed.h
+ inst/include/XEM.h
+ inst/include/XEMCategorical.h
+ inst/include/XEMContinuous.h
+ inst/include/XEMInteger.h
+ inst/include/XEMMixed.h
+ inst/include/XEMPen.h
+Some compilers warn on such files.
+* checking line endings in Makefiles ... OK
+* checking compilation flags in Makevars ... OK
+* checking for GNU extensions in Makefiles ... OK
+* checking for portable use of $(BLAS_LIBS) and $(LAPACK_LIBS) ... OK
+* checking compiled code ... OK
+* checking installed files from ‘inst/doc’ ... OK
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘VarSelLCM.Rmd’using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: 2 NOTEs
+
+
+
+
+
+
+```
+# wrswoR
+
+
+
+* Version: 1.1
+* Source code: https://github.com/cran/wrswoR
+* URL: http://krlmlr.github.io/wrswoR
+* BugReports: https://github.com/krlmlr/wrswoR/issues
+* Date/Publication: 2018-02-02 18:26:36 UTC
+* Number of recursive dependencies: 125
+
+Run `cloud_details(, "wrswoR")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/wrswoR/new/wrswoR.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘wrswoR/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘wrswoR’ version ‘1.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘metap’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/wrswoR/old/wrswoR.Rcheck’
+* using R version 3.6.3 (2020-02-29)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘wrswoR/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘wrswoR’ version ‘1.1’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Package suggested but not available: ‘metap’
+
+The suggested packages are required for a complete check.
+Checking can be attempted without them by setting the environment
+variable _R_CHECK_FORCE_SUGGESTS_ to a false value.
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+
+```
diff --git a/revdep/problems.md b/revdep/problems.md
new file mode 100644
index 0000000000..141f319258
Binary files /dev/null and b/revdep/problems.md differ