Description of all CMake Options that can be set for the TUM Open Infra Platform project.
A CMake Option is visible in the CMake GUI as a box that can be ticked (or not).
If you have made changes and want to return to the default values, you will have to delete the CMake cache and configure again.
Refer to CMake "Option" command.
The options that can be set for the TUM Open Infra Platform are grouped as project-specific options and external options (libraries and thirdparty software). For each, you will find a description of what each option does, what its default value is and where to find the source code where the option is set if you require more information or wish to make changes there. Click on the name below to jump to the respective section.
The following are options specific to the build of the TUM Open Infra Platform project. The options are grouped thematically. Click on the name below to jump to the respective section.
If you want to see information about external library and thirdparty software options instead, you can find them here.
| Option | Default | Description |
|---|---|---|
BUILD_COVERAGE |
OFF | Compile with gcov |
BUILD_SHARED_LIBS |
ON | Compile libcarve as shared |
BUILD_TESTING |
ON | Build the testing tree |
BUILD_TESTS |
ON | Deprecated, use BUILD_TESTING |
BUILD_UTILS |
ON | Build utilities |
BUILD_GMOCK |
ON | Build GoogleMock subproject |
The TUM Open Infra Platform uses doxygen to document its code. The CMake options listed below allow the user to adjust the outcome of the documentation by selecting which parts of the source code should be included in the generated documentation. For more information on how doxygen is used in the TUM Open Infra Platform, please refer to Doxygen Documentation.
| Option | Default | Description | Link to file |
|---|---|---|---|
DOXYGEN_GENERATE_DOCUMENTATION |
ON | This option needs to be selected to build documentation. If selected, CMake will automatically find the doxygen and dot executables and display the options below. | Go to file |
DOXYGEN_OPTIONAL_INCLUDE_COMMENTED_ONLY |
ON | If selected, only documentation for explicitly commented entities will be generated. Otherwise, doxygen will assume that all entities are documented, even if there is no documentation available. | Go to file |
DOXYGEN_OPTIONAL_INCLUDE_INTERNAL |
OFF | If selected, this will include all comments preceded by \internal. These are comments intended for developers only. So if the generated documentation is intended for external users, this option should not be selected. |
Go to file |
DOXYGEN_OPTIONAL_INCLUDE_EARLY_BINDING |
OFF | If selected (... and already built, see here), this will include the selected IFC schemas in the documentation. Otherwise, the schemas will not be included in the documentation, but this does not influence the selection of IFC schemas (see EarlyBinding). | Go to file |
DOXYGEN_OPTIONAL_AUTO_OPEN_DOCUMENTATION |
ON | If selected, the landing page of the documentation will open automatically within VS. If not selected, you will have to find and open the generated documentation manually. | Go to file |
These options allow you to select which IFC schemas should be parsed and C++ generated in the project.
For each change in the selection, you have to generate CMake again (see here).
The default value for the schemata are set here.
| Option | Default |
|---|---|
EARLYBINDING_WITH_IFC2X3 |
OFF |
EARLYBINDING_WITH_IFC4 |
OFF |
EARLYBINDING_WITH_IFC4X1 |
OFF |
EARLYBINDING_WITH_IFC4X2 |
OFF |
EARLYBINDING_WITH_IFC4X2_BIM4ROAD |
OFF |
EARLYBINDING_WITH_IFC4X2_DRAFT_1 |
OFF |
EARLYBINDING_WITH_IFC4X3_RC1 |
ON |
| Option | Default |
|---|---|
FETCHCONTENT_FULLY_DISCONNECTED |
OFF |
FETCHCONTENT_QUIET |
ON |
FETCHCONTENT_UPDATES_DISCONNECTED |
OFF |
FETCHCONTENT_UPDATES_DISCONNECTED_BLUE_FRAMEWORK |
OFF |
FETCHCONTENT_UPDATES_DISCONNECTED_DEP_GTEST |
OFF |
FETCHCONTENT_UPDATES_DISCONNECTED_EIGEN |
OFF |
FETCHCONTENT_UPDATES_DISCONNECTED_GLEW |
OFF |
FETCHCONTENT_UPDATES_DISCONNECTED_GTEST |
OFF |
FETCHCONTENT_UPDATES_DISCONNECTED_TCLAP |
OFF |
FETCHCONTENT_UPDATES_DISCONNECTED_TINYXML2 |
OFF |
FETCHCONTENT_UPDATES_DISCONNECTED_VISIT_STRUCT |
OFF |
FETCHCONTENT_UPDATES_VISIT_STRUCT_ZLIB |
OFF |
These options allow you to include specific modules to the TUM Open Infra Platform project. Currently, only the point cloud processing module is supported. These options are specified here.
| Option | Default |
|---|---|
OIP_WITH_POINT_CLOUD_PROCESSING |
OFF |
| Option | Default | Description | Link to file |
|---|---|---|---|
BLUEFRAMEWORK_USE_PREDEFINED_THIRDPARTY_PATH |
ON | ||
OIP_USE_PREDEFINED_THIRDPARTY_PATH |
ON | If selected, CMake tries to find Boost, Eigen3, Qt5 without user input. | Go to file |
ASMD64 |
OFF | ||
ASM686 |
OFF |
The following are options for external libraries and thirdparty software that are used in the TUM Open Infra Platform project that can be set for the build of the TUM Open Infra platform project. Click on the name below to jump to the respective section.
If you want to see information about project-specific options instead, you can find them here.
Refer to Carve to see what each option executes.
| Option | Default |
|---|---|
CARVE_DEBUG |
OFF |
CARVE_DEBUG_WRITE_PLY_DATA |
OFF |
CARVE_GTESTS_TESTS |
OFF |
CARVE_INTERSECT_GLU_TRIANGULATOR |
OFF |
CARVE_USE_EXACT_PREDICATES |
OFF |
CARVE_WITH_GUI |
OFF |
| Option | Default | Description | Link to file |
|---|---|---|---|
CMAKE_SKIP_INSTALL_RPATH |
OFF | Do not include RPATH-s in the install tree. |
|
CMAKE_SKIP_RPATH |
OFF | If this is set to true, then the RPATH information is not added to compiled executables. |
|
CMAKE_VERBOSE_MAKEFILE |
OFF | Get more verbose output from Makefile builds and show each command line as it is launched. |
| Option | Default |
|---|---|
CUDA_64_BIT_DEVICE_CODE |
ON |
CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE |
ON |
CUDA_BUILD_EMULATION |
OFF |
CUDA_CUDART_LIBRARY |
OFF |
CUDA_HOST_COMPILATION_CPP |
ON |
CUDA_PROPAGATE_HOST_FLAGS |
ON |
CUDA_SEPARABLE_COMPILATION |
OFF |
CUDA_VERBOSE_BUILD |
OFF |
Eigen is a C++ template library for linear algebra.
Refer to Eigen to see what each option executes.
| Option | Default |
|---|---|
EIGEN_DEBUG_ASSERTS |
OFF |
EIGEN_DEFAULT_TO_ROW_MAJOR |
OFF |
EIGEN_FAILTEST |
OFF |
EIGEN_INTERNAL_DOCUMENTATION |
OFF |
EIGEN_NO_ASSERTION_CHECKING |
OFF |
EIGEN_SPLIT_LARGE_TESTS |
ON |
EIGEN_TEST_32BIT |
OFF |
EIGEN_TEST_BUILD_DOCUMENTATION |
OFF |
EIGEN_TEST_CUDA |
OFF |
EIGEN_TEST_CUDA_CLANG |
OFF |
EIGEN_TEST_CXX1 |
OFF |
EIGEN_TEST_EIGEN2 |
OFF |
EIGEN_TEST_NOQT |
OFF |
EIGEN_TEST_NO_EXCEPTIONS |
OFF |
EIGEN_TEST_NO_EXPLICIT_ALIGNMENT |
OFF |
EIGEN_TEST_NO_EXPLICIT_VECTORIZATION |
OFF |
EIGEN_TEST_NO_OPENGL |
OFF |
EIGEN_TEST_OPENMP |
OFF |
EIGEN_TEST_SSE2 |
OFF |
EIGEN_TEST_SYCL |
OFF |
EIGEN_TESTX87 |
OFF |
| Option | Default |
|---|---|
GLEW_OSMESA |
OFF |
GLEW_REGAL |
OFF |
Googletest and Googlemock help writing C++ tests.
| Option | Default | Description | Link to file |
|---|---|---|---|
INSTALL_GTEST |
ON | Enables the installation of Gtest. |
Go to file |
BUILD_GMOCK |
ON | Builds the googlemock subproject. |
Go to file |
gtest_build_samples |
OFF | If selected, builds gtest's sample programs. |
Go to file |
gtest_build_tests |
OFF | If selected, builds all of gtest's own tests. |
Go to file |
gtest_disable_pthreads |
OFF | If selected, disables uses of pthreads in gtest. |
Go to file |
gtest_force_shared_crt |
OFF | If selected, uses shared (DLL) run-time lib even when Google Test is built as static lib. | Go to file |
gtest_hide_internal_symbols |
OFF | If selected, builds gtest with internal symbols hidden in shared libraries. | Go to file |
| Option | Default |
|---|---|
MPI_CXX_SKIP_MPICSS |
OFF |