| layout | title |
|---|---|
toc |
PgBouncer command-line usage |
pgbouncer [-d][-R][-v][-u user] <pgbouncer.ini>
pgbouncer -V|-h
On Windows, the options are:
pgbouncer.exe [-v][-u user] <pgbouncer.ini>
pgbouncer.exe -V|-h
Additional options for setting up a Windows service:
pgbouncer.exe --regservice <pgbouncer.ini>
pgbouncer.exe --unregservice <pgbouncer.ini>
pgbouncer is a PostgreSQL connection pooler. Any target application can be connected to pgbouncer as if it were a PostgreSQL server, and pgbouncer will create a connection to the actual server, or it will reuse one of its existing connections.
The aim of pgbouncer is to lower the performance impact of opening new connections to PostgreSQL.
In order not to compromise transaction semantics for connection pooling, pgbouncer supports several types of pooling when rotating connections:
Session pooling
: Most polite method. When a client connects, a server connection will be assigned to it for the whole duration the client stays connected. When the client disconnects, the server connection will be put back into the pool. This is the default method.
Transaction pooling
: A server connection is assigned to a client only during a transaction. When PgBouncer notices that transaction is over, the server connection will be put back into the pool.
Statement pooling
: Most aggressive method. The server connection will be put back into the pool immediately after a query completes. Multi-statement transactions are disallowed in this mode as they would break.
The administration interface of pgbouncer consists of some new
SHOW commands available when connected to a special "virtual"
database pgbouncer.
Basic setup and usage is as follows.
-
Create a pgbouncer.ini file. Details in pgbouncer(5). Simple example:
[databases] template1 = host=localhost port=5432 dbname=template1 [pgbouncer] listen_port = 6432 listen_addr = localhost auth_type = md5 auth_file = userlist.txt logfile = pgbouncer.log pidfile = pgbouncer.pid admin_users = someuser -
Create a
userlist.txtfile that contains the users allowed in:"someuser" "same_password_as_in_server" -
Launch pgbouncer:
$ pgbouncer -d pgbouncer.ini -
Have your application (or the psql client) connect to pgbouncer instead of directly to the PostgreSQL server:
$ psql -p 6432 -U someuser template1 -
Manage pgbouncer by connecting to the special administration database pgbouncer and issuing
SHOW HELP;to begin:$ psql -p 6432 -U someuser pgbouncer pgbouncer=# SHOW HELP; NOTICE: Console usage DETAIL: SHOW [HELP|CONFIG|DATABASES|FDS|POOLS|CLIENTS|SERVERS|SOCKETS|LISTS|VERSION|...] SET key = arg RELOAD PAUSE SUSPEND RESUME SHUTDOWN [...] -
If you made changes to the pgbouncer.ini file, you can reload it with:
pgbouncer=# RELOAD;
-d, --daemon
: Run in the background. Without it, the process will run in the foreground.
In daemon mode, setting `pidfile` as well as `logfile` or `syslog`
is required. No log messages will be written to stderr after
going into the background.
Note: Does not work on Windows; **pgbouncer** need to run as service there.
-R, --reboot
: DEPRECATED: Instead of this option use a rolling restart with multiple
pgbouncer processes listening on the same port using so_reuseport instead
Do an online restart. That means connecting to the running process,
loading the open sockets from it, and then using them. If there
is no active process, boot normally.
Note: Works only if OS supports Unix sockets and the unix_socket_dir
is not disabled in configuration. Does not work on Windows.
Does not work with TLS connections, they are dropped.
-u USERNAME, --user=USERNAME
: Switch to the given user on startup.
-v, --verbose
: Increase verbosity. Can be used multiple times.
-q, --quiet
: Be quiet: do not log to stderr. This does not affect
logging verbosity, only that stderr is not to be used.
For use in init.d scripts.
-V, --version
: Show version.
-h, --help
: Show short help.
--regservice
: Win32: Register pgbouncer to run as Windows service. The service_name
configuration parameter value is used as the name to register under.
--unregservice
: Win32: Unregister Windows service.
The console is available by connecting as normal to the database pgbouncer:
$ psql -p 6432 pgbouncer
Only users listed in the configuration parameters admin_users or stats_users
are allowed to log in to the console. (Except when auth_type=any, then
any user is allowed in as a stats_user.)
Additionally, the user name pgbouncer is allowed to log in without password, if the login comes via the Unix socket and the client has same Unix user UID as the running process.
The admin console currently only supports the simple query protocol. Some drivers use the extended query protocol for all commands; these drivers will not work for this.
The SHOW commands output information. Each command is described below.
Shows statistics. In this and related commands, the total figures are
since process start, the averages are updated every stats_period.
database : Statistics are presented per database.
total_xact_count : Total number of SQL transactions pooled by pgbouncer.
total_query_count : Total number of SQL commands pooled by pgbouncer.
total_server_assignment_count : Total times a server was assigned to a client
total_received : Total volume in bytes of network traffic received by pgbouncer.
total_sent : Total volume in bytes of network traffic sent by pgbouncer.
total_xact_time : Total number of microseconds spent by pgbouncer when connected to PostgreSQL in a transaction, either idle in transaction or executing queries.
total_query_time : Total number of microseconds spent by pgbouncer when actively connected to PostgreSQL, executing queries.
total_wait_time : Time spent by clients waiting for a server, in microseconds. Updated when a client connection is assigned a backend connection.
avg_xact_count : Average transactions per second in last stat period.
avg_query_count : Average queries per second in last stat period.
avg_server_assignment_count : Average number of times a server as assigned to a client per second in the last stat period.
avg_recv : Average received (from clients) bytes per second.
avg_sent : Average sent (to clients) bytes per second.
avg_xact_time : Average transaction duration, in microseconds.
avg_query_time : Average query duration, in microseconds.
avg_wait_time
: Time spent by clients waiting for a server, in microseconds (average
of the wait times for clients assigned a backend during the current
stats_period).
Subset of SHOW STATS showing the total values (total_).
Subset of SHOW STATS showing the average values (avg_).
Like SHOW STATS but aggregated across all databases.
type : S, for server.
user : User name pgbouncer uses to connect to server.
database : Database name.
replication : If server connection uses replication. Can be none, logical or physical.
state : State of the pgbouncer server connection, one of active, idle, used, tested, new, active_cancel, being_canceled.
addr : IP address of PostgreSQL server.
port : Port of PostgreSQL server.
local_addr : Connection start address on local machine.
local_port : Connection start port on local machine.
connect_time : When the connection was made.
request_time : When last request was issued.
wait : Not used for server connections.
wait_us : Not used for server connections.
close_needed : 1 if the connection will be closed as soon as possible, because a configuration file reload or DNS update changed the connection information or RECONNECT was issued.
ptr : Address of internal object for this connection. Used as unique ID.
link : Address of client connection the server is paired with.
remote_pid : PID of backend server process. In case connection is made over Unix socket and OS supports getting process ID info, its OS PID. Otherwise it's extracted from cancel packet the server sent, which should be the PID in case the server is PostgreSQL, but it's a random number in case the server it is another PgBouncer.
tls : A string with TLS connection information, or empty if not using TLS.
application_name
: A string containing the application_name set on the linked client connection,
or empty if this is not set, or if there is no linked connection.
prepared_statements
: The amount of prepared statements that are prepared on the server. This
number is limited by the max_prepared_statements setting.
type : C, for client.
user : Client connected user.
database : Database name.
replication : If client connection uses replication. Can be none, logical or physical.
state : State of the client connection, one of active, waiting, active_cancel_req, or waiting_cancel_req.
addr : IP address of client.
port : Source port of client.
local_addr : Connection end address on local machine.
local_port : Connection end port on local machine.
connect_time : Timestamp of connect time.
request_time : Timestamp of latest client request.
wait : Current waiting time in seconds.
wait_us : Microsecond part of the current waiting time.
close_needed : not used for clients
ptr : Address of internal object for this connection. Used as unique ID.
link : Address of server connection the client is paired with.
remote_pid : Process ID, in case client connects over Unix socket and OS supports getting it.
tls : A string with TLS connection information, or empty if not using TLS.
application_name
: A string containing the application_name set by the client
for this connection, or empty if this was not set.
prepared_statements : The amount of prepared statements that the client has prepared
A new pool entry is made for each couple of (database, user).
database : Database name.
user : User name.
cl_active : Client connections that are either linked to server connections or are idle with no queries waiting to be processed.
cl_waiting : Client connections that have sent queries but have not yet got a server connection.
cl_active_cancel_req : Client connections that have forwarded query cancellations to the server and are waiting for the server response.
cl_waiting_cancel_req : Client connections that have not forwarded query cancellations to the server yet.
sv_active : Server connections that are linked to a client.
sv_active_cancel : Server connections that are currently forwarding a cancel request.
sv_being_canceled : Servers that normally could become idle but are waiting to do so until all in-flight cancel requests have completed that were sent to cancel a query on this server.
sv_idle : Server connections that are unused and immediately usable for client queries.
sv_used
: Server connections that have been idle for more than server_check_delay,
so they need server_check_query to run on them before they can be used again.
sv_tested
: Server connections that are currently running either server_reset_query
or server_check_query.
sv_login : Server connections currently in the process of logging in.
maxwait : How long the first (oldest) client in the queue has waited, in seconds. If this starts increasing, then the current pool of servers does not handle requests quickly enough. The reason may be either an overloaded server or just too small of a pool_size setting.
maxwait_us : Microsecond part of the maximum waiting time.
pool_mode : The pooling mode in use.
A new peer_pool entry is made for each configured peer.
database : ID of the configured peer entry.
cl_active_cancel_req : Client connections that have forwarded query cancellations to the server and are waiting for the server response.
cl_waiting_cancel_req : Client connections that have not forwarded query cancellations to the server yet.
sv_active_cancel : Server connections that are currently forwarding a cancel request.
sv_login : Server connections currently in the process of logging in.
Show following internal information, in columns (not rows):
databases : Count of databases.
users : Count of users.
pools : Count of pools.
free_clients : Count of free clients. These are clients that are disconnected, but PgBouncer keeps the memory around that was allocated for them so it can be reused for a future clients to avoid allocations.
used_clients : Count of used clients.
login_clients : Count of clients in login state.
free_servers : Count of free servers. These are servers that are disconnected, but PgBouncer keeps the memory around that was allocated for them so it can be reused for a future servers to avoid allocations.
used_servers : Count of used servers.
dns_names : Count of DNS names in the cache.
dns_zones : Count of DNS zones in the cache.
dns_queries : Count of in-flight DNS queries.
dns_pending : not used
name : The user name
pool_size : The user's override pool_size. or NULL if not set.
pool_mode : The user's override pool_mode, or NULL if not set.
max_user_connections : The user's max_user_connections setting. If this setting is not set for this specific user, then the default value will be displayed.
current_connections : Current number of connections that this user has open to all servers.
name : Name of configured database entry.
host : Host pgbouncer connects to.
port : Port pgbouncer connects to.
database : Actual database name pgbouncer connects to.
force_user : When the user is part of the connection string, the connection between pgbouncer and PostgreSQL is forced to the given user, whatever the client user.
pool_size : Maximum number of server connections.
min_pool_size : Minimum number of server connections.
reserve_pool : Maximum number of additional connections for this database.
server_lifetime : The maximum lifetime of a server connection for this database
pool_mode : The database's override pool_mode, or NULL if the default will be used instead.
max_connections : Maximum number of allowed connections for this database, as set by max_db_connections, either globally or per database.
current_connections : Current number of connections for this database.
paused : 1 if this database is currently paused, else 0.
disabled : 1 if this database is currently disabled, else 0.
peer_id : ID of the configured peer entry.
host : Host pgbouncer connects to.
port : Port pgbouncer connects to.
pool_size : Maximum number of server connections that can be made to this peer
Internal command - shows list of file descriptors in use with internal state attached to them.
When the connected user has the user name "pgbouncer", connects through the Unix socket and has same the UID as the running process, the actual FDs are passed over the connection. This mechanism is used to do an online restart. Note: This does not work on Windows.
This command also blocks the internal event loop, so it should not be used while PgBouncer is in use.
fd : File descriptor numeric value.
task : One of pooler, client or server.
user : User of the connection using the FD.
database : Database of the connection using the FD.
addr : IP address of the connection using the FD, unix if a Unix socket is used.
port : Port used by the connection using the FD.
cancel : Cancel key for this connection.
link : fd for corresponding server/client. NULL if idle.
Shows low-level information about sockets or only active sockets. This includes the information shown under SHOW CLIENTS and SHOW SERVERS as well as other more low-level information.
Show the current configuration settings, one per row, with the following columns:
key : Configuration variable name
value : Configuration value
default : Configuration default value
changeable : Either yes or no, shows if the variable can be changed while running. If no, the variable can be changed only at boot time. Use SET to change a variable at run time.
Shows low-level information about the current sizes of various internal memory allocations. The information presented is subject to change.
Show host names in DNS cache.
hostname : Host name.
ttl : How many seconds until next lookup.
addrs : Comma separated list of addresses.
Show DNS zones in cache.
zonename : Zone name.
serial : Current serial.
count : Host names belonging to this zone.
Show the PgBouncer version string.
Show the PgBouncer state settings. Current states are active, paused and suspended.
PgBouncer tries to disconnect from all servers. Disconnecting each server connection waits for that server connection to be released according to the server pool's pooling mode (in transaction pooling mode, the transaction must complete, in statement mode, the statement must complete, and in session pooling mode the client must disconnect). The command will not return before all server connections have been disconnected. To be used at the time of database restart.
If database name is given, only that database will be paused.
New client connections to a paused database will wait until RESUME is called.
Reject all new client connections on the given database.
Allow new client connections after a previous DISABLE command.
Close each open server connection for the given database, or all databases, after it is released (according to the pooling mode), even if its lifetime is not up yet. New server connections can be made immediately and will connect as necessary according to the pool size settings.
This command is useful when the server connection setup has changed, for example to perform a gradual switchover to a new server. It is not necessary to run this command when the connection string in pgbouncer.ini has been changed and reloaded (see RELOAD) or when DNS resolution has changed, because then the equivalent of this command will be run automatically. This command is only necessary if something downstream of PgBouncer routes the connections.
After this command is run, there could be an extended period where some server connections go to an old destination and some server connections go to a new destination. This is likely only sensible when switching read-only traffic between read-only replicas, or when switching between nodes of a multimaster replication setup. If all connections need to be switched at the same time, PAUSE is recommended instead. To close server connections without waiting (for example, in emergency failover rather than gradual switchover scenarios), also consider KILL.
Immediately drop all client and server connections on given database.
New client connections to a killed database will wait until RESUME is called.
All socket buffers are flushed and PgBouncer stops listening for data on them. The command will not return before all buffers are empty. To be used at the time of PgBouncer online reboot.
New client connections to a suspended database will wait until RESUME is called.
Resume work from previous KILL, PAUSE, or SUSPEND command.
The PgBouncer process will exit.
Stop accepting new connections and shutdown after all servers are released. This is basically the same as issuing PAUSE and SHUTDOWN, except that this also stops accepting new connections while waiting for the PAUSE as well as eagerly disconnecting clients that are waiting to receive a server connection.
Stop accepting new connections and shutdown the process once all existing clients have disconnected. This command can be used to do zero-downtime rolling restart of two PgBouncer processes using the following procedure:
- Have two or more PgBouncer processes running on the same port using
so_reuseport(configuring peering is recommended, but not required). To achieve zero downtime when restarting we'll restart these processes one-by-one, thus leaving the others running to accept connections while one is being restarted. - Pick a process to restart first, let's call it A.
- Run
SHUTDOWN WAIT_FOR_CLIENTS(or sendSIGTERM) to process A. - Cause all clients to reconnect. Possibly by waiting some time until the
client side pooler causes reconnects due to its
server_idle_timeout(or similar config). Or if no client side pooler is used, possibly by restarting the clients. Once all clients have reconnected. Process A will exit automatically, because no clients are connected to it anymore. - Start process A again.
- Repeat step 3, 4 and 5 for each of the remaining processes, one-by-one until you restarted all processes.
The PgBouncer process will reload its configuration files and update
changeable settings. This includes the main configuration file as
well as the files specified by the settings auth_file and
auth_hba_file.
PgBouncer notices when a configuration file reload changes the connection parameters of a database definition. An existing server connection to the old destination will be closed when the server connection is next released (according to the pooling mode), and new server connections will immediately use the updated connection parameters.
Wait until all server connections, either of the specified database or of all databases, have cleared the "close_needed" state (see SHOW SERVERS). This can be called after a RECONNECT or RELOAD to wait until the respective configuration change has been fully activated, for example in switchover scripts.
Changes a configuration setting (see also SHOW CONFIG). For example:
SET log_connections = 1;
SET server_check_query = 'select 2';
(Note that this command is run on the PgBouncer admin console and sets PgBouncer settings. A SET command run on another database will be passed to the PostgreSQL backend like any other SQL command.)
SIGHUP : Reload config. Same as issuing the command RELOAD on the console.
SIGTERM : Super safe shutdown. Wait for all existing clients to disconnect, but don't accept new connections. This is the same as issuing SHUTDOWN WAIT_FOR_CLIENTS on the console. If this signal is received while there is already a shutdown in progress, then an "immediate shutdown" is triggered instead of a "super safe shutdown". In PgBouncer versions earlier than 1.23.0, this signal would cause an "immediate shutdown".
SIGINT : Safe shutdown. Same as issuing SHUTDOWN WAIT_FOR_SERVERS on the console. If this signal is received while there is already a shutdown in progress, then an "immediate shutdown" is triggered instead of a "safe shutdown".
SIGQUIT : Immediate shutdown. Same as issuing SHUTDOWN on the console.
SIGUSR1 : Same as issuing PAUSE on the console.
SIGUSR2 : Same as issuing RESUME on the console.
From the Libevent documentation:
It is possible to disable support for epoll, kqueue, devpoll, poll or select by setting the environment variable EVENT_NOEPOLL, EVENT_NOKQUEUE, EVENT_NODEVPOLL, EVENT_NOPOLL or EVENT_NOSELECT, respectively.
By setting the environment variable EVENT_SHOW_METHOD, libevent displays the kernel notification method that it uses.
pgbouncer(5) - man page of configuration settings descriptions