Running "npm install" #152

jhernancanom · 2023-02-20T04:06:01Z

Hello, friends.

When I run npm install, I am getting the errs show in the image.
I aso attach the .log.

How should I proceed?

2023-02-20T03_33_47_630Z-debug-0.log

The text was updated successfully, but these errors were encountered:

ookamiiixd · 2023-02-20T14:55:32Z

I'm not sure, have you tried searching solution in the internet?

netrixken · 2023-02-21T05:20:38Z

can confirm this. also after npm install success & running npm build got error:

> [email protected] build
> tsc

src/controllers/chat.ts:16:12 - error TS7006: Parameter 'c' implicitly has an 'any' type.

16     ).map((c) => serializePrisma(c));
              ~

src/controllers/chat.ts:42:12 - error TS7006: Parameter 'm' implicitly has an 'any' type.

42     ).map((m) => serializePrisma(m));
              ~

src/controllers/message.ts:20:12 - error TS7006: Parameter 'm' implicitly has an 'any' type.

20     ).map((m) => serializePrisma(m));
              ~

src/shared.ts:1:10 - error TS2305: Module '"@prisma/client"' has no exported member 'PrismaClient'.

1 import { PrismaClient } from '@prisma/client';
           ~~~~~~~~~~~~


Found 4 errors in 3 files.

Errors  Files
     2  src/controllers/chat.ts:16
     1  src/controllers/message.ts:20
     1  src/shared.ts:1

ookamiiixd · 2023-02-22T01:39:01Z

@netrixken, actually, i've never used npm anymore, i always use yarn instead. I'll take a look into this later

kampit · 2023-02-25T08:09:47Z

You can disable the TypeScript compiler from checking for implicit any types by adding the following line to your tsconfig.json file:

{
  "compilerOptions": {
    "noImplicitAny": false
  }
}

ookamiiixd · 2023-02-26T15:24:41Z

@netrixken i just realized that your error is most likely caused because you haven't setup your database before build. I'm sorry, this is my fault because of the wrong step in the guide

The correct step is actually after the step 3 of Installation, you have to do the Setup step before going into step 4. I'll update the guide asap

jhernancanom · 2023-03-03T03:55:28Z

Thanks, ookamiiixd.

I see that the error message is refering to git.

Dispite I don't see instructions saying that git is needed, nor how to install git, i'll try to get git installed.

jhernancanom · 2023-03-03T06:12:57Z

Hi, friends.
How should I proceed?

jhernancanom · 2023-03-05T03:11:31Z

My tryings in this week.
See attached PDF for my asking this time.

I used some .BAT files for guiding myself to run the different commands; I attach them.

When I used CHECKING.BAT I discovered that I had KAWIX and KODNET with an older version of NodeJs, and --for what I see and understand-- this could be disturbing my installing of Baileys. Then I proceed to deactivate KodNet.

Thanks

Procedimiento-2023-03-04.pdf

imagenes.zip

BAT-files.zip

jhernancanom · 2023-03-07T13:55:34Z

Does the

"activeProvider": "mysql",

also needs to be changed in

.........\node_modules\.prisma\client\index.js

in line 301?

and/or in

.........\node_modules\.prisma\client\schema.prisma

????

jhernancanom · 2023-03-11T05:19:48Z

I am installing from scratch (ever and ever) (I wrote several .BAT files that help me to do it).

But when I got the Prisma-step, I am receiving a bunch of errors (I put text because it seems on GitHub we cannot put images); the errors start with (and go until line 160):


_**npx prisma db push**_

Environment variables loaded from .env

Prisma schema loaded from prisma\schema.prisma

Datasource "db": SQLite database "EMPRESA.db3" at "file:E:/baileys-waza/FACTURACION/EMPRESA.db3"

Error: P1012

error: Native type VarChar is not supported for sqlite connector.
  -->  schema.prisma:15
   |
14 |   pkId                      Int      @id @default(autoincrement())
15 |   sessionId                 String   @db.VarChar(128)
   |
error: Native type VarChar is not supported for sqlite connector.
  -->  schema.prisma:20
   |
19 |   createdAt                 BigInt?
20 |   createdBy                 String?  @db.VarChar(128)
   |
error: Native type VarChar is not supported for sqlite connector.
  -->  schema.prisma:21
   |
20 |   createdBy                 String?  @db.VarChar(128)
21 |   description               String?  @db.VarChar(255)
   |

jhernancanom · 2023-03-11T06:13:44Z

I am seeing in README main page that

Prisma supported databases (click here). Tested on MySQL and PostgreSQL.

SQLite is included in Prisma, but not in Baileys-API.

I'll wait for SQLite in Baileys-API.

What if do not wanna use a db?

What do I need to do in .ENV file to accomplish this?

jhernancanom · 2023-04-08T20:03:21Z

Hi, friends.
I decided to get MySQL installed for trying to give an opportunity to new-Baileys version.

I run my scripts from zero, and I only receive the errs shown in imagen-01, when npm-run-build.

The last scripts are shown un imagen-02, and they show ok.

I transcript what images say, because here in GitHub I have discovered you cannot see images.

Dos the err in image-01 means that I am going to have any problem?

I am stuck in reading the QR imagen. But I do not know how to get the QR image appears..... after many tryings it appears and when I try to read it, I got an err about "The image could not been read".

If I use a JSON like { "id": "mensajes", "isLegacy":"false" }
I got { "msg": "Invalid value", "param": "sessionId", "location": "body" } .

If I use a JSON like { "sessionId": "mensajes", "isLegacy":"false" }
I got the same err { "msg": "Invalid value", "param": "sessionId", "location": "body" } .

========================================

From IMAGE-01:

E:\baileys-waza\baileys-api-master>2-npm-run-build.bat
......
2-npm-run-build.bat
......

E:\baileys-waza\baileys-api-master>call E:\node-waza\2022-12-10\node-v18.12.1-win-x64\npm run build

[email protected] build
tsc

src/controllers/chat.ts:16:12 - error TS7006: Parameter 'c' implicitly has an 'any' type.

16 ).map((c) => serializePrisma(c));
~

src/controllers/chat.ts:42:12 - error TS7006: Parameter 'm' implicitly has an 'any' type.

42 ).map((m) => serializePrisma(m));
~

src/controllers/message.ts:20:12 - error TS7006: Parameter 'm' implicitly has an 'any' type.

20 ).map((m) => serializePrisma(m));
~

Found 3 errors in 2 files.

Errors Files
2 src/controllers/chat.ts:16
1 src/controllers/message.ts:20
npm notice
npm notice New major version of npm available! 8.19.2 -> 9.6.4
npm notice Changelog: https://github.com/npm/cli/releases/tag/v9.6.4
npm notice Run npm install -g [email protected] to update!
npm notice
Presione una tecla para continuar . . .

========================================

From IMAGE-02:

E:\baileys-waza\baileys-api-master>3-npx-prisma-db.bat
......
3-npx-prisma-db.bat
......
npx prisma db push

E:\baileys-waza\baileys-api-master>call npx prisma db push

Environment variables loaded from .env
Prisma schema loaded from prisma\schema.prisma
Datasource "db": MySQL database "baileys_api" at "localhost:3306"

Your database is now in sync with your Prisma schema. Done in 8.43s

? Generated Prisma Client (4.11.0 | library) to .\node_modules@prisma\client in 1.80s

Presione una tecla para continuar . . .

E:\baileys-waza\baileys-api-master>4-npm-run-start.bat
......
4-npm-run-start.bat
......
E:\node-waza\2022-12-10\node-v18.12.1-win-x64\npm run start

E:\baileys-waza\baileys-api-master>call E:\node-waza\2022-12-10\node-v18.12.1-win-x64\npm run start

[email protected] start
node .

imports from "@prisma/client/runtime" are deprecated.
Use "@prisma/client/runtime/library", "@prisma/client/runtime/data-proxy" or "@prisma/client/runtime/binary"
Server is listening on http://localhost:3000

{"level":50,"time":1680972584638,"pid":736,"hostname":"DESKTOP-IAEMJFA","err":{"type":"NotFoundError","message":"No Session found","stack":"NotFoundError: No Session found\n at E:\baileys-waza\baileys-api-master\node_modules\@prisma\client\runtime\library.js:164:6704\n at async E:\baileys-waza\baileys-api-master\node_modules\@prisma\client\runtime\library.js:164:6643\n at async read (E:\baileys-waza\baileys-api-master\node_modules\@ookamiiixd\baileys-store\dist\session.js:28:30)\n at async useSession (E:\baileys-waza\baileys-api-master\node_modules\@ookamiiixd\baileys-store\dist\session.js:50:20)\n at async createSession (E:\baileys-waza\baileys-api-master\dist\wa.js:154:34)","code":"P2025","clientVersion":"4.11.0","name":"NotFoundError"},"msg":"An error occured during session read"}

========================================

From IMAGE-03:

The data for running the web service:

Method: POST
URL : http://localhost:3000/sessions/add
JSON : { "id": "mensajes", "isLegacy":"false" }

JSON : { "sessionId": "mensajes", "isLegacy":"false" }

The response of the web service:

{ "errors": [ { "msg": "Invalid value", "param": "sessionId", "location": "body" },
{ "msg": "Invalid value", "param": "sessionId", "location": "body" }
]
}

jhernancanom · 2023-04-17T18:45:15Z

jhernancanom · 2023-04-17T19:01:57Z

Yesterday --after a new trying -- from scratch-- (following my own instructions written by myself since starting and documented ones) I got send several proof messages.

Unfortunatelly we need MySQL (I had to activate a minimalistic Apache server), but the main goal (send a message) was reached.

Just to say:

I had to repeat the trying a lot of times -- from scratch every one.
When I run http://localhost:3000/sessions/NAME_OF_MY_SESSION/qr, I received "URL not found".

I would like to say more, but.... (it is very large now).

Can be closed. Thanks for sharing.

ookamiiixd linked a pull request Mar 10, 2023 that will close this issue

Dev #162

Draft

jhernancanom closed this as completed Apr 17, 2023

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Running "npm install" #152

Running "npm install" #152

jhernancanom commented Feb 20, 2023

ookamiiixd commented Feb 20, 2023

netrixken commented Feb 21, 2023 •

edited

Loading

ookamiiixd commented Feb 22, 2023 •

edited

Loading

kampit commented Feb 25, 2023 •

edited

Loading

ookamiiixd commented Feb 26, 2023

jhernancanom commented Mar 3, 2023 •

edited

Loading

jhernancanom commented Mar 3, 2023

jhernancanom commented Mar 5, 2023 •

edited

Loading

jhernancanom commented Mar 7, 2023

jhernancanom commented Mar 11, 2023 •

edited

Loading

jhernancanom commented Mar 11, 2023 •

edited

Loading

jhernancanom commented Apr 8, 2023 •

edited

Loading

jhernancanom commented Apr 17, 2023

jhernancanom commented Apr 17, 2023

Running "npm install" #152

Running "npm install" #152

Comments

jhernancanom commented Feb 20, 2023

ookamiiixd commented Feb 20, 2023

netrixken commented Feb 21, 2023 • edited Loading

ookamiiixd commented Feb 22, 2023 • edited Loading

kampit commented Feb 25, 2023 • edited Loading

ookamiiixd commented Feb 26, 2023

jhernancanom commented Mar 3, 2023 • edited Loading

jhernancanom commented Mar 3, 2023

jhernancanom commented Mar 5, 2023 • edited Loading

jhernancanom commented Mar 7, 2023

jhernancanom commented Mar 11, 2023 • edited Loading

jhernancanom commented Mar 11, 2023 • edited Loading

What if do not wanna use a db?

jhernancanom commented Apr 8, 2023 • edited Loading

From IMAGE-01:

From IMAGE-02:

From IMAGE-03:

jhernancanom commented Apr 17, 2023

jhernancanom commented Apr 17, 2023

netrixken commented Feb 21, 2023 •

edited

Loading

ookamiiixd commented Feb 22, 2023 •

edited

Loading

kampit commented Feb 25, 2023 •

edited

Loading

jhernancanom commented Mar 3, 2023 •

edited

Loading

jhernancanom commented Mar 5, 2023 •

edited

Loading

jhernancanom commented Mar 11, 2023 •

edited

Loading

jhernancanom commented Mar 11, 2023 •

edited

Loading

jhernancanom commented Apr 8, 2023 •

edited

Loading