Send_command and xiaomi_clean_zone not working

[suxarik]

First of all thanks for work you've done.
I've made this integration in my supervised docker home assistant system.

Problem
Every command seems to work (start, stop, return to base, pause,..) except for send_command and clean_zone.

What I expect
Send_command works

System
HomeAssistant supervised 0.110.5 on docker
nqkdev/home-assistant-vacuum-styj02ym latest

Symptoms
On send_command and clean_zone I get response timeout. It is strange since I can use all other commands.

2020-06-11 10:45:55 DEBUG (MainThread) [homeassistant.core] Service did not complete before timeout: <ServiceCall vacuum.send_command (c:ee4117629eef4f9099a2cd369c9a15e4): entity_id=['vacuum.vacuum_robot'], command=app_goto_target, params=[25500, 25500]>


2020-06-11 10:45:55 DEBUG (SyncWorker_4) [miio.miioprotocol] Retrying with incremented id, retries left: 2


2020-06-11 10:45:55 DEBUG (SyncWorker_4) [miio.protocol] Unable to decrypt, returning raw bytes: b''


2020-06-11 10:45:55 DEBUG (SyncWorker_4) [miio.miioprotocol] Got a response: Container: 

    data = Container: 


        data = b'' (total 0)


        value = b'' (total 0)


        offset1 = 32


        offset2 = 32


        length = 0


    header = Container: 


        data = b'!1\x00 \x00\x00\x00\x00\x12k\x16\x1f^\xe1\xe13' (total 16)


        value = Container: 


            length = 32


            unknown = 0


            device_id = b'\x12k\x16\x1f' (total 4)


            ts = 2020-06-11 07:45:55


        offset1 = 0


        offset2 = 16


        length = 16


    checksum = b'\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff' (total 16)

2020-06-11 10:45:55 DEBUG (SyncWorker_4) [miio.miioprotocol] Discovered 126b161f with ts: 2020-06-11 07:45:55, token: b'ffffffffffffffffffffffffffffffff'


2020-06-11 10:45:55 DEBUG (SyncWorker_4) [miio.miioprotocol] 192.168.10.179:54321 >>: {'id': 613, 'method': 'app_goto_target', 'params': [25500, 25500]}

Any idea what am I doing wrong? Thanks.

[nqkdev]

Hi there, there is no app_goto_target for styj02ym. If you have the coordinates, you can try xiaomi_clean_point with

{"point": [25500, 25500]}

or xiaomi_clean_zone with

{"zone" : [[x1, y2, x2, y1], [x1, y2, x2, y1]], "repeats": 1}

[suxarik]

Hi there, there is no app_goto_target for styj02ym. If you have the coordinates, you can try xiaomi_clean_point with

{"point": [25500, 25500]}

or xiaomi_clean_zone with

{"zone" : [[x1, y2, x2, y1], [x1, y2, x2, y1]], "repeats": 1}

Thanks. It's seems to be working. Are you planning to implement goto_target or segment_clean command?

[raress96]

Check #14, it may support what you need.

[suxarik]

Check #14, it may support what you need.

Thanks, will try.

[sheminasalam]

Hi there, there is no app_goto_target for styj02ym. If you have the coordinates, you can try xiaomi_clean_point with

{"point": [25500, 25500]}

or xiaomi_clean_zone with

{"zone" : [[x1, y2, x2, y1], [x1, y2, x2, y1]], "repeats": 1}

Thanks. It's seems to be working. Are you planning to implement goto_target or segment_clean command?

Can you advise me the best option to retrieve coordinates of different areas from styj02ym vacuum?