Would love a more in depth tutorial on how you built this!

[Defrogge]

Some schematics or maybe a video? I would love one of those SC1000s but they are far too expensive for me 😭

[anortesn]

Hi!, its been almost a year since I started this, so now that everything is stuffed inside the cage is a little bit difficult to get started with some schematics.

But some starting steps would be:

• Get the arduino code working, there it should be the PINs to connected both the Quadrature encoder and the fader.
• Once this code is uploaded to the arduino it should display both values.
• Then send these values via serial to the raspberry pi. Here I dont remeber the actual pins to make this work, but they should be available in the internet as those would be the serial pins on the rpi. (test_serial.py)
• Then get the rotary encoder connected to the rpi. (test_rotary.py). As always I can't recall the pins, but should be in the code.
• And last get the 2 buttons add on connected on the rpi.

Finally, just today I've made a final commit that fixes the most annoying bug remaining: when trying to scratch there was a lot of flutter and it didn't sound good at all. Now that is kind of fixed. :)

Hope this gets you started ;)
It is not that difficult.

Maybe you can come up with something better like the wow&flutter with a Hall Sensor and a motor to drive the platter.

Have a good one!