qtbase_zh_CN.ts

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.0" language="zh_CN">
<context>
    <name>QWidget</name>
    <message>
        <source>*</source>
        <translation>+</translation>
    </message>
</context>
<context>
    <name>QShortcut</name>
    <message>
        <source>+</source>
        <translation>+</translation>
    </message>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
    <message>
        <source>Up</source>
        <translation>上键</translation>
    </message>
    <message>
        <source>Alt</source>
        <translation>Alt</translation>
    </message>
    <message>
        <source>F%1</source>
        <translation>F%1</translation>
    </message>
    <message>
        <source>Del</source>
        <translation>Del</translation>
    </message>
    <message>
        <source>End</source>
        <translation>End</translation>
    </message>
    <message>
        <source>Esc</source>
        <translation>Esc</translation>
    </message>
    <message>
        <source>Ins</source>
        <translation>Ins</translation>
    </message>
    <message>
        <source>Tab</source>
        <translation>Tab</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>返回</translation>
    </message>
    <message>
        <source>Call</source>
        <translation>呼叫</translation>
    </message>
    <message>
        <source>Ctrl</source>
        <translation>Ctrl</translation>
    </message>
    <message>
        <source>Down</source>
        <translation>下键</translation>
    </message>
    <message>
        <source>Flip</source>
        <translation>反转</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>说明</translation>
    </message>
    <message>
        <source>Home</source>
        <translation>Home</translation>
    </message>
    <message>
        <source>Left</source>
        <translation>左键</translation>
    </message>
    <message>
        <source>Menu</source>
        <translation>菜单</translation>
    </message>
    <message>
        <source>Meta</source>
        <translation>Meta</translation>
    </message>
    <message>
        <source>PgUp</source>
        <translation>PgUp</translation>
    </message>
    <message>
        <source>Stop</source>
        <translation>停止</translation>
    </message>
    <message>
        <source>Enter</source>
        <translation>Enter</translation>
    </message>
    <message>
        <source>Pause</source>
        <translation>Pause</translation>
    </message>
    <message>
        <source>Print</source>
        <translation>Print</translation>
    </message>
    <message>
        <source>Right</source>
        <translation>右键</translation>
    </message>
    <message>
        <source>Shift</source>
        <translation>Shift</translation>
    </message>
    <message>
        <source>Space</source>
        <translation>空格键</translation>
    </message>
    <message>
        <source>Media Record</source>
        <translation>媒体录音</translation>
    </message>
    <message>
        <source>Print Screen</source>
        <translation>打印屏幕</translation>
    </message>
    <message>
        <source>Treble Down</source>
        <translation>Treble Down</translation>
    </message>
    <message>
        <source>Scroll Lock</source>
        <translation>滚动条锁定</translation>
    </message>
    <message>
        <source>Volume Down</source>
        <translation>音量降低</translation>
    </message>
    <message>
        <source>Volume Mute</source>
        <translation>静音</translation>
    </message>
    <message>
        <source>Media Previous</source>
        <translation>媒体前一首</translation>
    </message>
    <message>
        <source>Home Page</source>
        <translation>首页</translation>
    </message>
    <message>
        <source>Volume Up</source>
        <translation>音量提高</translation>
    </message>
    <message>
        <source>Launch (6)</source>
        <translation>启动（6）</translation>
    </message>
    <message>
        <source>Launch (7)</source>
        <translation>启动（7）</translation>
    </message>
    <message>
        <source>Launch (8)</source>
        <translation>启动（8）</translation>
    </message>
    <message>
        <source>Launch (9)</source>
        <translation>启动（9）</translation>
    </message>
    <message>
        <source>Launch (2)</source>
        <translation>启动（2）</translation>
    </message>
    <message>
        <source>Launch (3)</source>
        <translation>启动（3）</translation>
    </message>
    <message>
        <source>Launch (4)</source>
        <translation>启动（4）</translation>
    </message>
    <message>
        <source>Launch (5)</source>
        <translation>启动（5）</translation>
    </message>
    <message>
        <source>Launch (0)</source>
        <translation>启动（0）</translation>
    </message>
    <message>
        <source>Launch (1)</source>
        <translation>启动（1）</translation>
    </message>
    <message>
        <source>Launch (F)</source>
        <translation>启动（F）</translation>
    </message>
    <message>
        <source>Launch (B)</source>
        <translation>启动（B）</translation>
    </message>
    <message>
        <source>Launch (C)</source>
        <translation>启动（C）</translation>
    </message>
    <message>
        <source>Launch (D)</source>
        <translation>启动（D）</translation>
    </message>
    <message>
        <source>Launch (E)</source>
        <translation>启动（E）</translation>
    </message>
    <message>
        <source>Launch (A)</source>
        <translation>启动（A）</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Escape</source>
        <translation>Escape</translation>
    </message>
    <message>
        <source>Hangup</source>
        <translation>挂断</translation>
    </message>
    <message>
        <source>Insert</source>
        <translation>插入</translation>
    </message>
    <message>
        <source>Bass Boost</source>
        <translation>重低音</translation>
    </message>
    <message>
        <source>PgDown</source>
        <translation>PgDown</translation>
    </message>
    <message>
        <source>Return</source>
        <translation>Return</translation>
    </message>
    <message>
        <source>Search</source>
        <translation>搜寻</translation>
    </message>
    <message>
        <source>Select</source>
        <translation>选择</translation>
    </message>
    <message>
        <source>SysReq</source>
        <translation>SysReq</translation>
    </message>
    <message>
        <source>NumLock</source>
        <translation>数字锁定</translation>
    </message>
    <message>
        <source>ScrollLock</source>
        <translation>滚动条锁定</translation>
    </message>
    <message>
        <source>Context1</source>
        <translation>内文1</translation>
    </message>
    <message>
        <source>Context2</source>
        <translation>内文2</translation>
    </message>
    <message>
        <source>Context3</source>
        <translation>内文3</translation>
    </message>
    <message>
        <source>Context4</source>
        <translation>内文4</translation>
    </message>
    <message>
        <source>Page Up</source>
        <translation>往上一页</translation>
    </message>
    <message>
        <source>Open URL</source>
        <translation>开启网址</translation>
    </message>
    <message>
        <source>Caps Lock</source>
        <translation>大写锁定</translation>
    </message>
    <message>
        <source>System Request</source>
        <translation>系统要求 SysRq</translation>
    </message>
    <message>
        <source>CapsLock</source>
        <translation>大写锁定</translation>
    </message>
    <message>
        <source>Backtab</source>
        <translation>Backtab</translation>
    </message>
    <message>
        <source>Bass Up</source>
        <translation>Bass Up</translation>
    </message>
    <message>
        <source>Refresh</source>
        <translation>刷新</translation>
    </message>
    <message>
        <source>Launch Mail</source>
        <translation>启动邮件程序</translation>
    </message>
    <message>
        <source>Backspace</source>
        <translation>Backspace</translation>
    </message>
    <message>
        <source>Bass Down</source>
        <translation>Bass Down</translation>
    </message>
    <message>
        <source>Standby</source>
        <translation>待命</translation>
    </message>
    <message>
        <source>Treble Up</source>
        <translation>Treble Up</translation>
    </message>
    <message>
        <source>Num Lock</source>
        <translation>数字锁定</translation>
    </message>
    <message>
        <source>Number Lock</source>
        <translation>数字锁定</translation>
    </message>
    <message>
        <source>Favorites</source>
        <translation>我的最爱</translation>
    </message>
    <message>
        <source>Forward</source>
        <translation>往前</translation>
    </message>
    <message>
        <source>Page Down</source>
        <translation>往下一页</translation>
    </message>
    <message>
        <source>Media Play</source>
        <translation>媒体播放</translation>
    </message>
    <message>
        <source>Media Stop</source>
        <translation>媒体停止</translation>
    </message>
    <message>
        <source>Media Next</source>
        <translation>媒体下一首</translation>
    </message>
    <message>
        <source>Launch Media</source>
        <translation>启动媒体程序</translation>
    </message>
</context>
<context>
    <name>QPrintDialog</name>
    <message>
        <source>A0</source>
        <translation>A0</translation>
    </message>
    <message>
        <source>A1</source>
        <translation>A1</translation>
    </message>
    <message>
        <source>A2</source>
        <translation>A2</translation>
    </message>
    <message>
        <source>A3</source>
        <translation>A3</translation>
    </message>
    <message>
        <source>A4</source>
        <translation>A4</translation>
    </message>
    <message>
        <source>A5</source>
        <translation>A5</translation>
    </message>
    <message>
        <source>A6</source>
        <translation>A6</translation>
    </message>
    <message>
        <source>A7</source>
        <translation>A7</translation>
    </message>
    <message>
        <source>A8</source>
        <translation>A8</translation>
    </message>
    <message>
        <source>A9</source>
        <translation>A9</translation>
    </message>
    <message>
        <source>B0</source>
        <translation>B0</translation>
    </message>
    <message>
        <source>B1</source>
        <translation>B1</translation>
    </message>
    <message>
        <source>B2</source>
        <translation>B2</translation>
    </message>
    <message>
        <source>B3</source>
        <translation>B3</translation>
    </message>
    <message>
        <source>B4</source>
        <translation>B4</translation>
    </message>
    <message>
        <source>B5</source>
        <translation>B5</translation>
    </message>
    <message>
        <source>B6</source>
        <translation>B6</translation>
    </message>
    <message>
        <source>B7</source>
        <translation>B7</translation>
    </message>
    <message>
        <source>B8</source>
        <translation>B8</translation>
    </message>
    <message>
        <source>B9</source>
        <translation>B9</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>B10</source>
        <translation>B10</translation>
    </message>
    <message>
        <source>C5E</source>
        <translation>C5E</translation>
    </message>
    <message>
        <source>DLE</source>
        <translation>DLE</translation>
    </message>
    <message>
        <source>A6 (105 x 148 mm)</source>
        <translation>A6 (105 x 148 mm)</translation>
    </message>
    <message>
        <source>Legal (8.5 x 14 inches, 216 x 356 mm)</source>
        <translation>Legal (8.5 x 14 英吋, 216 x 356 mm)</translation>
    </message>
    <message>
        <source>Folio</source>
        <translation>Folio</translation>
    </message>
    <message>
        <source>Legal</source>
        <translation>Legal</translation>
    </message>
    <message>
        <source>Print all</source>
        <translation>全部打印</translation>
    </message>
    <message>
        <source>Print</source>
        <translation>打印</translation>
    </message>
    <message>
        <source>&amp;Options &lt;&lt;</source>
        <translation>操作 (&amp;O) &lt;&lt;</translation>
    </message>
    <message>
        <source>&amp;Options &gt;&gt;</source>
        <translation>操作 (&amp;O) &gt;&gt;</translation>
    </message>
    <message>
        <source>B6 (125 x 176 mm)</source>
        <translation>B6 (125 x 176 mm)</translation>
    </message>
    <message>
        <source>B8 (62 x 88 mm)</source>
        <translation>B8 (62 x 88 mm)</translation>
    </message>
    <message>
        <source>A8 (52 x 74 mm)</source>
        <translation>A8 (52 x 74 mm)</translation>
    </message>
    <message>
        <source>B9 (44 x 62 mm)</source>
        <translation>B9 (44 x 62 mm)</translation>
    </message>
    <message>
        <source>A9 (37 x 52 mm)</source>
        <translation>A9 (37 x 52 mm)</translation>
    </message>
    <message>
        <source>B0 (1000 x 1414 mm)</source>
        <translation>B0 (1000 x 1414 mm)</translation>
    </message>
    <message>
        <source>A5 (148 x 210 mm)</source>
        <translation>A5 (148 x 210 mm)</translation>
    </message>
    <message>
        <source>Tabloid (279 x 432 mm)</source>
        <translation>Tabloid (279 x 432 mm)</translation>
    </message>
    <message>
        <source>B10 (31 x 44 mm)</source>
        <translation>B10 (31 x 44 mm)</translation>
    </message>
    <message>
        <source>B2 (500 x 707 mm)</source>
        <translation>B2 (500 x 707 mm)</translation>
    </message>
    <message>
        <source>&amp;Print</source>
        <translation>打印(&amp;P)</translation>
    </message>
    <message>
        <source>A3 (297 x 420 mm)</source>
        <translation>A3 (297 x 420 mm)</translation>
    </message>
    <message>
        <source>Print selection</source>
        <translation>打印选择区</translation>
    </message>
    <message>
        <source>Print to File (Postscript)</source>
        <translation>打印到文件（Postscript）</translation>
    </message>
    <message>
        <source>B4 (250 x 353 mm)</source>
        <translation>B4 (250 x 353 mm)</translation>
    </message>
    <message>
        <source>%1 already exists.
Do you want to overwrite it?</source>
        <translation>%1 已存在。
您要覆写它吗?</translation>
    </message>
    <message>
        <source>A1 (594 x 841 mm)</source>
        <translation>A1 (594 x 841 mm)</translation>
    </message>
    <message>
        <source>Custom</source>
        <translation>自定义</translation>
    </message>
    <message>
        <source>B1 (707 x 1000 mm)</source>
        <translation>B1 (707 x 1000 mm)</translation>
    </message>
    <message>
        <source>Folio (210 x 330 mm)</source>
        <translation>对开 (210 x 330 mm)</translation>
    </message>
    <message>
        <source>Ledger</source>
        <translation>Ledger</translation>
    </message>
    <message>
        <source>Letter</source>
        <translation>Letter</translation>
    </message>
    <message>
        <source>DLE (110 x 220 mm)</source>
        <translation>DLE (110 x 220 mm)</translation>
    </message>
    <message>
        <source>C5E (163 x 229 mm)</source>
        <translation>C5E (163 x 229 mm)</translation>
    </message>
    <message>
        <source>B5 (176 x 250 mm, 6.93 x 9.84 inches)</source>
        <translation>B5 (176 x 250 mm, 6.93 x 9.84 英吋)</translation>
    </message>
    <message>
        <source>Print range</source>
        <translation>打印范围</translation>
    </message>
    <message>
        <source>File exists</source>
        <translation>文件已存在</translation>
    </message>
    <message>
        <source>Write %1 file</source>
        <translation>写入 %1 文件</translation>
    </message>
    <message>
        <source>A0 (841 x 1189 mm)</source>
        <translation>A0 (841 x 1189 mm)</translation>
    </message>
    <message>
        <source>Local file</source>
        <translation>本地端文件</translation>
    </message>
    <message>
        <source>locally connected</source>
        <translation>本地连接</translation>
    </message>
    <message>
        <source>Ledger (432 x 279 mm)</source>
        <translation>Ledger (432 x 279 mm)</translation>
    </message>
    <message>
        <source>Aliases: %1</source>
        <translation>别名：%1</translation>
    </message>
    <message>
        <source>Print to File (PDF)</source>
        <translation>打印到文件（PDF）</translation>
    </message>
    <message>
        <source>Print To File ...</source>
        <translation>打印到文件...</translation>
    </message>
    <message>
        <source>US Common #10 Envelope (105 x 241 mm)</source>
        <translation>US 常用 10 号信封 (105x241 mm)</translation>
    </message>
    <message>
        <source>Tabloid</source>
        <translation>Tabloid</translation>
    </message>
    <message>
        <source>A4 (210 x 297 mm, 8.26 x 11.7 inches)</source>
        <translation>A4 (210 x 297 mm, 8.26 x 11.7 英吋)</translation>
    </message>
    <message>
        <source>Executive</source>
        <translation>Executive</translation>
    </message>
    <message>
        <source>unknown</source>
        <translation>未知</translation>
    </message>
    <message>
        <source>&lt;qt&gt;Do you want to overwrite it?&lt;/qt&gt;</source>
        <translation>&lt;qt&gt;您要覆写它吗？&lt;/qt&gt;</translation>
    </message>
    <message>
        <source>Executive (7.5 x 10 inches, 191 x 254 mm)</source>
        <translation>Executive (7.5 x 10 英吋, 191 x 254 mm)</translation>
    </message>
    <message>
        <source>Letter (8.5 x 11 inches, 216 x 279 mm)</source>
        <translation>Letter (8.5 x 11 英吋, 216 x 279 mm)</translation>
    </message>
    <message>
        <source>The &apos;From&apos; value cannot be greater than the &apos;To&apos; value.</source>
        <translation>起始数值不能大于结束数值。</translation>
    </message>
    <message>
        <source>US Common #10 Envelope</source>
        <translation>US Common #10 Envelope</translation>
    </message>
    <message>
        <source>%1 is a directory.
Please choose a different file name.</source>
        <translation>%1 是一个目录。
请选择其他档名。</translation>
    </message>
    <message>
        <source>File %1 is not writable.
Please choose a different file name.</source>
        <translation>文件 %1 无法写入。
请选择其它档名。</translation>
    </message>
    <message>
        <source>B3 (353 x 500 mm)</source>
        <translation>B3 (353 x 500 mm)</translation>
    </message>
    <message>
        <source>A7 (74 x 105 mm)</source>
        <translation>A7 (74 x 105 mm)</translation>
    </message>
    <message>
        <source>A2 (420 x 594 mm)</source>
        <translation>A2 (420 x 594 mm)</translation>
    </message>
    <message>
        <source>B7 (88 x 125 mm)</source>
        <translation>B7 (88 x 125 mm)</translation>
    </message>
</context>
<context>
    <name>QDateTimeEdit</name>
    <message>
        <source>AM</source>
        <translation>AM</translation>
    </message>
    <message>
        <source>PM</source>
        <translation>PM</translation>
    </message>
    <message>
        <source>am</source>
        <translation>am</translation>
    </message>
    <message>
        <source>pm</source>
        <translation>pm</translation>
    </message>
</context>
<context>
    <name>Q3TabDialog</name>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>说明</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>套用</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Defaults</source>
        <translation>默认</translation>
    </message>
</context>
<context>
    <name>QAxSelect</name>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>COM &amp;Object:</source>
        <translation>COM &amp;物件:</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation>&amp;取消</translation>
    </message>
    <message>
        <source>Select ActiveX Control</source>
        <translation>选择 ActiveX 控制</translation>
    </message>
</context>
<context>
    <name>QDialogButtonBox</name>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation>&amp;确定</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation>&amp;否</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation>&amp;是</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>说明</translation>
    </message>
    <message>
        <source>Open</source>
        <translation>开启</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation>&amp;保存</translation>
    </message>
    <message>
        <source>Abort</source>
        <translation>中止</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>套用</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Reset</source>
        <translation>重置</translation>
    </message>
    <message>
        <source>Retry</source>
        <translation>重试</translation>
    </message>
    <message>
        <source>Restore Defaults</source>
        <translation>回复默认值</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation>&amp;关闭</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Ignore</source>
        <translation>忽略</translation>
    </message>
    <message>
        <source>Close without Saving</source>
        <translation>关闭而不保存</translation>
    </message>
    <message>
        <source>N&amp;o to All</source>
        <translation>全部&amp;回答否</translation>
    </message>
    <message>
        <source>Save All</source>
        <translation>全部保存</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation>&amp;取消</translation>
    </message>
    <message>
        <source>Discard</source>
        <translation>丢弃</translation>
    </message>
    <message>
        <source>Yes to &amp;All</source>
        <translation>全部&amp;回答是</translation>
    </message>
    <message>
        <source>Don&apos;t Save</source>
        <translation>不要&apos;保存</translation>
    </message>
</context>
<context>
    <name>QMessageBox</name>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>说明</translation>
    </message>
    <message>
        <source>Show Details...</source>
        <translation>显示详情...</translation>
    </message>
    <message>
        <source>&lt;p&gt;This program uses Qt Open Source Edition version %1.&lt;/p&gt;&lt;p&gt;Qt Open Source Edition is intended for the development of Open Source applications. You need a commercial Qt license for development of proprietary (closed source) applications.&lt;/p&gt;&lt;p&gt;Please see &lt;a href=&quot;http://qtsoftware.com/company/model/&quot;&gt;qtsoftware.com/company/model/&lt;/a&gt; for an overview of Qt licensing.&lt;/p&gt;</source>
        <translation>&lt;p&gt;这个程序使用了 Qt 开放源码版本 %1。&lt;/p&gt;&lt;p&gt;Qt 开放源码版本是专门为了开发开放源码应用程序使用的版本。若是您要开发专利私有（封闭）软件，您需要 Qt 的商业授权。&lt;/p&gt;&lt;p&gt;Qt 的授权概要请参考 &lt;a href=&quot;http://qtsoftware.com/company/model/&quot;&gt;qtsoftware.com/company/model/&lt;/a&gt;。&lt;/p&gt;</translation>
    </message>
    <message>
        <source>About Qt</source>
        <translation>关于 Qt</translation>
    </message>
    <message>
        <source>Hide Details...</source>
        <translation>隐藏详情...</translation>
    </message>
    <message>
        <source>&lt;h3&gt;About Qt&lt;/h3&gt;%1&lt;p&gt;Qt is a C++ toolkit for cross-platform application development.&lt;/p&gt;&lt;p&gt;Qt provides single-source portability across MS&amp;nbsp;Windows, Mac&amp;nbsp;OS&amp;nbsp;X, Linux, and all major commercial Unix variants. Qt is also available for embedded devices as Qt for Embedded Linux and Qt for Windows CE.&lt;/p&gt;&lt;p&gt;Qt is a Nokia product. See &lt;a href=&quot;http://qtsoftware.com/qt/&quot;&gt;qtsoftware.com/qt/&lt;/a&gt; for more information.&lt;/p&gt;</source>
        <translation>&lt;h3&gt;关于 Qt&lt;/h3&gt;%1&lt;p&gt;Qt 为一个跨平台的 C++ 开发工具。&lt;/p&gt;&lt;p&gt;Qt 提供各平台兼容机制，只要写一份程序码，就可以在 MS&amp;nbsp;Windows、Mac&amp;nbsp;OS&amp;nbsp;X、Linux 与各主要的商业 Unix 平台上编译。Qt 也有用于嵌入式 Linux 与 Windows CE 的版本。&lt;/p&gt;&lt;p&gt;Qt 为 Nokia 的产品。详情请参考 &lt;a href=&quot;http://qtsoftware.com/qt/&quot;&gt;qtsoftware.com/qt/&lt;/a&gt;。&lt;/p&gt;</translation>
    </message>
    <message>
        <source>&lt;p&gt;This program uses Qt version %1.&lt;/p&gt;</source>
        <translation>&lt;p&gt; 这个程序使用 Qt 版本 %1&lt;/p&gt;</translation>
    </message>
</context>
<context>
    <name>QSql</name>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Insert</source>
        <translation>插入</translation>
    </message>
    <message>
        <source>Update</source>
        <translation>更新</translation>
    </message>
    <message>
        <source>Delete this record?</source>
        <translation>要删除这笔纪录吗?</translation>
    </message>
    <message>
        <source>Save edits?</source>
        <translation>要保存编辑过的内容吗?</translation>
    </message>
    <message>
        <source>Confirm</source>
        <translation>确认</translation>
    </message>
    <message>
        <source>Cancel your edits?</source>
        <translation>要取消编辑吗?</translation>
    </message>
</context>
<context>
    <name>QPrintSettingsOutput</name>
    <message>
        <source>to</source>
        <translation>到</translation>
    </message>
    <message>
        <source>Form</source>
        <translation>窗体</translation>
    </message>
    <message>
        <source>None</source>
        <translation>无</translation>
    </message>
    <message>
        <source>Color</source>
        <translation>颜色</translation>
    </message>
    <message>
        <source>Print all</source>
        <translation>全部打印</translation>
    </message>
    <message>
        <source>Selection</source>
        <translation>选择区</translation>
    </message>
    <message>
        <source>Long side</source>
        <translation>长边</translation>
    </message>
    <message>
        <source>Copies</source>
        <translation>份数</translation>
    </message>
    <message>
        <source>Print range</source>
        <translation>打印范围</translation>
    </message>
    <message>
        <source>Color Mode</source>
        <translation>颜色模式</translation>
    </message>
    <message>
        <source>Options</source>
        <translation>选项</translation>
    </message>
    <message>
        <source>Output Settings</source>
        <translation>输出设置</translation>
    </message>
    <message>
        <source>Reverse</source>
        <translation>反向</translation>
    </message>
    <message>
        <source>Grayscale</source>
        <translation>灰阶</translation>
    </message>
    <message>
        <source>Short side</source>
        <translation>短边</translation>
    </message>
    <message>
        <source>Collate</source>
        <translation>校对</translation>
    </message>
    <message>
        <source>Copies:</source>
        <translation>份数:</translation>
    </message>
    <message>
        <source>Pages from</source>
        <translation>指定页面：从</translation>
    </message>
    <message>
        <source>Duplex Printing</source>
        <translation>双工打印</translation>
    </message>
</context>
<context>
    <name>QPrintPreviewDialog</name>
    <message>
        <source>%1%</source>
        <translation>%1%</translation>
    </message>
    <message>
        <source>Print Preview</source>
        <translation>打印预览</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Print</source>
        <translation>打印</translation>
    </message>
    <message>
        <source>Fit page</source>
        <translation>符合页面</translation>
    </message>
    <message>
        <source>Zoom in</source>
        <translation>放大</translation>
    </message>
    <message>
        <source>Landscape</source>
        <translation>横向</translation>
    </message>
    <message>
        <source>Zoom out</source>
        <translation>缩小</translation>
    </message>
    <message>
        <source>Fit width</source>
        <translation>符合宽度</translation>
    </message>
    <message>
        <source>Portrait</source>
        <translation>纵向</translation>
    </message>
    <message>
        <source>Page Setup</source>
        <translation>页面设置</translation>
    </message>
    <message>
        <source>Page setup</source>
        <translation>打印设置</translation>
    </message>
    <message>
        <source>Show overview of all pages</source>
        <translation>显示所有页面预览</translation>
    </message>
    <message>
        <source>First page</source>
        <translation>第一页</translation>
    </message>
    <message>
        <source>Last page</source>
        <translation>最后一页</translation>
    </message>
    <message>
        <source>Show single page</source>
        <translation>显示单一页面</translation>
    </message>
    <message>
        <source>Export to PDF</source>
        <translation>汇出到 PDF 檔</translation>
    </message>
    <message>
        <source>Previous page</source>
        <translation>前一页</translation>
    </message>
    <message>
        <source>Next page</source>
        <translation>下一页</translation>
    </message>
    <message>
        <source>Show facing pages</source>
        <translation>显示封面</translation>
    </message>
    <message>
        <source>Export to PostScript</source>
        <translation>汇出到 PostScript 檔</translation>
    </message>
</context>
<context>
    <name>Q3FileDialog</name>
    <message>
        <source>&amp;OK</source>
        <translation>&amp;确定</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation>&amp;否</translation>
    </message>
    <message>
        <source>Dir</source>
        <translation>目录</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation>&amp;是</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>返回</translation>
    </message>
    <message>
        <source>Date</source>
        <translation>日期</translation>
    </message>
    <message>
        <source>File</source>
        <translation>文件</translation>
    </message>
    <message>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <source>Open</source>
        <translation>开启</translation>
    </message>
    <message>
        <source>Size</source>
        <translation>大小</translation>
    </message>
    <message>
        <source>Sort</source>
        <translation>排序</translation>
    </message>
    <message>
        <source>Type</source>
        <translation>型态</translation>
    </message>
    <message>
        <source>&amp;Open</source>
        <translation>&amp;开启</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation>&amp;保存</translation>
    </message>
    <message>
        <source>Error</source>
        <translation>错误</translation>
    </message>
    <message>
        <source>Open </source>
        <translation>开启 </translation>
    </message>
    <message>
        <source>Write: %1</source>
        <translation>写入：%1</translation>
    </message>
    <message>
        <source>Sort by &amp;Size</source>
        <translation>依大小&amp;排序</translation>
    </message>
    <message>
        <source>Sort by &amp;Date</source>
        <translation>依日期&amp;排序</translation>
    </message>
    <message>
        <source>Sort by &amp;Name</source>
        <translation>依名称&amp;排序</translation>
    </message>
    <message>
        <source>New Folder 1</source>
        <translation>新文件夹 1</translation>
    </message>
    <message>
        <source>the directory</source>
        <translation>此目录</translation>
    </message>
    <message>
        <source>File &amp;type:</source>
        <translation>文件&amp;型态:</translation>
    </message>
    <message>
        <source>File &amp;name:</source>
        <translation>檔&amp;名:</translation>
    </message>
    <message>
        <source>Delete %1</source>
        <translation>删除 %1</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>R&amp;eload</source>
        <translation>重&amp;新载入</translation>
    </message>
    <message>
        <source>New Folder</source>
        <translation>新文件夹</translation>
    </message>
    <message>
        <source>&amp;Unsorted</source>
        <translation>未&amp;排序</translation>
    </message>
    <message>
        <source>Look &amp;in:</source>
        <translation>寻找&amp;于:</translation>
    </message>
    <message>
        <source>Preview File Contents</source>
        <translation>预览文件内容</translation>
    </message>
    <message>
        <source>New Folder %1</source>
        <translation>新文件夹 %1</translation>
    </message>
    <message>
        <source>Read-write</source>
        <translation>可擦写</translation>
    </message>
    <message>
        <source>Read-only</source>
        <translation>只读</translation>
    </message>
    <message>
        <source>Copy or Move a File</source>
        <translation>复制或移动文件</translation>
    </message>
    <message>
        <source>&lt;qt&gt;Are you sure you wish to delete %1 &quot;%2&quot;?&lt;/qt&gt;</source>
        <translation>&lt;qt&gt;您确定要删除 %1 &quot;%2&quot; 吗？&lt;/qt&gt;</translation>
    </message>
    <message>
        <source>Find Directory</source>
        <translation>寻找目录</translation>
    </message>
    <message>
        <source>Attributes</source>
        <translation>属性</translation>
    </message>
    <message>
        <source>Show &amp;hidden files</source>
        <translation>显示&amp;隐藏档</translation>
    </message>
    <message>
        <source>Save As</source>
        <translation>另存新檔</translation>
    </message>
    <message>
        <source>Inaccessible</source>
        <translation>无法存取</translation>
    </message>
    <message>
        <source>%1
File not found.
Check path and filename.</source>
        <translation>%1
找不到文件。
请检查路径与文件名。</translation>
    </message>
    <message>
        <source>List View</source>
        <translation>列表检视</translation>
    </message>
    <message>
        <source>Special</source>
        <translation>特殊节点</translation>
    </message>
    <message>
        <source>Write-only</source>
        <translation>唯写</translation>
    </message>
    <message>
        <source>the symlink</source>
        <translation>此符号链接</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation>&amp;删除</translation>
    </message>
    <message>
        <source>All Files (*)</source>
        <translation>所有文件 (*)</translation>
    </message>
    <message>
        <source>Directories</source>
        <translation>目录</translation>
    </message>
    <message>
        <source>Symlink to Special</source>
        <translation>到特殊节点的符号链接</translation>
    </message>
    <message>
        <source>Select a Directory</source>
        <translation>请选择一个目录</translation>
    </message>
    <message>
        <source>All Files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <source>Read: %1</source>
        <translation>读取：%1</translation>
    </message>
    <message>
        <source>&amp;Rename</source>
        <translation>&amp;重新命名</translation>
    </message>
    <message>
        <source>Directory:</source>
        <translation>目录:</translation>
    </message>
    <message>
        <source>One directory up</source>
        <translation>往上一层目录</translation>
    </message>
    <message>
        <source>Preview File Info</source>
        <translation>预览文件信息</translation>
    </message>
    <message>
        <source>the file</source>
        <translation>此文件</translation>
    </message>
    <message>
        <source>Create New Folder</source>
        <translation>建立新文件夹</translation>
    </message>
    <message>
        <source>Symlink to File</source>
        <translation>到文件的符号链接</translation>
    </message>
    <message>
        <source>Symlink to Directory</source>
        <translation>到目录的符号链接</translation>
    </message>
    <message>
        <source>Detail View</source>
        <translation>详细检视</translation>
    </message>
</context>
<context>
    <name>QErrorMessage</name>
    <message>
        <source>&amp;OK</source>
        <translation>&amp;确定</translation>
    </message>
    <message>
        <source>Fatal Error:</source>
        <translation>严重错误:</translation>
    </message>
    <message>
        <source>&amp;Show this message again</source>
        <translation>&amp;再度显示此讯息</translation>
    </message>
    <message>
        <source>Debug Message:</source>
        <translation>调试讯息:</translation>
    </message>
    <message>
        <source>Warning:</source>
        <translation>警告:</translation>
    </message>
</context>
<context>
    <name>QPrintWidget</name>
    <message>
        <source>...</source>
        <translation>...</translation>
    </message>
    <message>
        <source>Form</source>
        <translation>窗体</translation>
    </message>
    <message>
        <source>Type:</source>
        <translation>型态:</translation>
    </message>
    <message>
        <source>&amp;Name:</source>
        <translation>&amp;名称:</translation>
    </message>
    <message>
        <source>Output &amp;file:</source>
        <translation>&amp;输出文件:</translation>
    </message>
    <message>
        <source>P&amp;roperties</source>
        <translation>属&amp;性</translation>
    </message>
    <message>
        <source>Preview</source>
        <translation>预览</translation>
    </message>
    <message>
        <source>Printer</source>
        <translation>打印机</translation>
    </message>
    <message>
        <source>Location:</source>
        <translation>位置:</translation>
    </message>
</context>
<context>
    <name>QFontDatabase</name>
    <message>
        <source>Any</source>
        <translation>任何</translation>
    </message>
    <message>
        <source>Lao</source>
        <translation>寮国</translation>
    </message>
    <message>
        <source>Bold</source>
        <translation>粗体</translation>
    </message>
    <message>
        <source>Demi</source>
        <translation>半体</translation>
    </message>
    <message>
        <source>Thai</source>
        <translation>泰语</translation>
    </message>
    <message>
        <source>Black</source>
        <translation>黑体</translation>
    </message>
    <message>
        <source>Greek</source>
        <translation>希腊</translation>
    </message>
    <message>
        <source>Khmer</source>
        <translation>高棉</translation>
    </message>
    <message>
        <source>Latin</source>
        <translation>拉丁</translation>
    </message>
    <message>
        <source>Light</source>
        <translation>轻体</translation>
    </message>
    <message>
        <source>Ogham</source>
        <translation>欧甘</translation>
    </message>
    <message>
        <source>Oriya</source>
        <translation>Oriya</translation>
    </message>
    <message>
        <source>Runic</source>
        <translation>卢恩</translation>
    </message>
    <message>
        <source>Tamil</source>
        <translation>坦米尔</translation>
    </message>
    <message>
        <source>Cyrillic</source>
        <translation>斯拉夫</translation>
    </message>
    <message>
        <source>Kannada</source>
        <translation>坎达那</translation>
    </message>
    <message>
        <source>Malayalam</source>
        <translation>马来语</translation>
    </message>
    <message>
        <source>Simplified Chinese</source>
        <translation>简体中文</translation>
    </message>
    <message>
        <source>Demi Bold</source>
        <translation>半粗体</translation>
    </message>
    <message>
        <source>Arabic</source>
        <translation>阿拉伯</translation>
    </message>
    <message>
        <source>Hebrew</source>
        <translation>希伯来</translation>
    </message>
    <message>
        <source>Myanmar</source>
        <translation>缅甸</translation>
    </message>
    <message>
        <source>Italic</source>
        <translation>斜体</translation>
    </message>
    <message>
        <source>Korean</source>
        <translation>韩语</translation>
    </message>
    <message>
        <source>Normal</source>
        <translation>正常</translation>
    </message>
    <message>
        <source>Oblique</source>
        <translation>倾斜体</translation>
    </message>
    <message>
        <source>Telugu</source>
        <translation>Telugu</translation>
    </message>
    <message>
        <source>Thaana</source>
        <translation>Thaana</translation>
    </message>
    <message>
        <source>Symbol</source>
        <translation>符号</translation>
    </message>
    <message>
        <source>Syriac</source>
        <translation>叙利亚</translation>
    </message>
    <message>
        <source>Devanagari</source>
        <translation>Devanagari</translation>
    </message>
    <message>
        <source>Japanese</source>
        <translation>日语</translation>
    </message>
    <message>
        <source>Bengali</source>
        <translation>孟加拉国</translation>
    </message>
    <message>
        <source>Armenian</source>
        <translation>亚美尼亚</translation>
    </message>
    <message>
        <source>Sinhala</source>
        <translation>锡兰</translation>
    </message>
    <message>
        <source>Tibetan</source>
        <translation>西藏</translation>
    </message>
    <message>
        <source>Vietnamese</source>
        <translation>越南</translation>
    </message>
    <message>
        <source>Gujarati</source>
        <translation>Gujarati</translation>
    </message>
    <message>
        <source>Traditional Chinese</source>
        <translation>繁体中文</translation>
    </message>
    <message>
        <source>Georgian</source>
        <translation>乔治亚</translation>
    </message>
    <message>
        <source>Gurmukhi</source>
        <translation>Gurmukhi</translation>
    </message>
</context>
<context>
    <name>QWebPage</name>
    <message>
        <source>Cut</source>
        <translation>剪切</translation>
    </message>
    <message>
        <source>LTR</source>
        <translation>左到右</translation>
    </message>
    <message>
        <source>RTL</source>
        <translation>右到左</translation>
    </message>
    <message>
        <source>Top</source>
        <translation>顶端</translation>
    </message>
    <message>
        <source>Bold</source>
        <translation>粗体</translation>
    </message>
    <message>
        <source>Copy</source>
        <translation>复制</translation>
    </message>
    <message>
        <source>Stop</source>
        <translation>停止</translation>
    </message>
    <message>
        <source>Open Frame</source>
        <translation>开启框架</translation>
    </message>
    <message>
        <source>Open Image</source>
        <translation>开启影像</translation>
    </message>
    <message>
        <source>Fonts</source>
        <translation>字型</translation>
    </message>
    <message>
        <source>Paste</source>
        <translation>粘贴</translation>
    </message>
    <message>
        <source>Reset</source>
        <translation>重置</translation>
    </message>
    <message>
        <source>Inspect</source>
        <translation>查验</translation>
    </message>
    <message>
        <source>Select to the start of the block</source>
        <translation>选择到这一个区块的起头</translation>
    </message>
    <message>
        <source>Move the cursor to the end of the block</source>
        <translation>移动光标到这一个区块的结尾</translation>
    </message>
    <message>
        <source>Select to the start of the line</source>
        <translation>选择到这一行的起头</translation>
    </message>
    <message>
        <source>Look Up In Dictionary</source>
        <translation>在字典里搜寻</translation>
    </message>
    <message>
        <source>Search The Web</source>
        <translation>搜寻站台</translation>
    </message>
    <message>
        <source>Check Spelling While Typing</source>
        <translation>打字时立即检查拼字</translation>
    </message>
    <message>
        <source>Add To Dictionary</source>
        <translation>新增到字典</translation>
    </message>
    <message>
        <source>Delete to the start of the word</source>
        <translation>删除到此单字的起头</translation>
    </message>
    <message>
        <source>Recent searches</source>
        <translation>最近的搜寻</translation>
    </message>
    <message>
        <source>Move the cursor to the next word</source>
        <translation>移动光标到下一个单字</translation>
    </message>
    <message>
        <source>Move the cursor to the next line</source>
        <translation>移动光标到下一行</translation>
    </message>
    <message>
        <source>JavaScript Alert - %1</source>
        <translation>JavaScript 警告 ─ %1</translation>
    </message>
    <message>
        <source>Scroll down</source>
        <translation>往下滚动条</translation>
    </message>
    <message>
        <source>Scroll here</source>
        <translation>在此滚动条</translation>
    </message>
    <message>
        <source>Scroll left</source>
        <translation>往左滚动条</translation>
    </message>
    <message>
        <source>Move the cursor to the start of the block</source>
        <translation>移动光标到这一个区块的起头</translation>
    </message>
    <message>
        <source>Text Direction</source>
        <translation>文本方向</translation>
    </message>
    <message>
        <source>Bottom</source>
        <translation>底端</translation>
    </message>
    <message>
        <source>Ignore</source>
        <translation>忽略</translation>
    </message>
    <message>
        <source>Italic</source>
        <translation>斜体</translation>
    </message>
    <message>
        <source>Move the cursor to the end of the line</source>
        <translation>移动光标到这一行的结尾</translation>
    </message>
    <message>
        <source>Move the cursor to the start of the line</source>
        <translation>移动光标到这一行的起头</translation>
    </message>
    <message>
        <source>Reload</source>
        <translation>重载</translation>
    </message>
    <message>
        <source>JavaScript Confirm - %1</source>
        <translation>JavaScript 确认 ─ %1</translation>
    </message>
    <message>
        <source>Submit</source>
        <translation>提交</translation>
    </message>
    <message>
        <source>Web Inspector - %2</source>
        <translation>网站查验器─%2</translation>
    </message>
    <message>
        <source>Page up</source>
        <translation>页面上方</translation>
    </message>
    <message>
        <source>Spelling</source>
        <translation>拼字</translation>
    </message>
    <message>
        <source>Outline</source>
        <translation>外框线</translation>
    </message>
    <message>
        <source>Check Grammar With Spelling</source>
        <translation>检查拼字与文法</translation>
    </message>
    <message>
        <source>No file selected</source>
        <translation>未选取任何文件</translation>
    </message>
    <message>
        <source>Ignore</source>
        <comment>Ignore Grammar context menu item</comment>
        <translation>忽略</translation>
    </message>
    <message>
        <source>Save Image</source>
        <translation>保存影像</translation>
    </message>
    <message>
        <source>Save Link...</source>
        <translation>保存连结...</translation>
    </message>
    <message>
        <source>No recent searches</source>
        <translation>没有最近的搜寻</translation>
    </message>
    <message>
        <source>Page right</source>
        <translation>页面右方</translation>
    </message>
    <message>
        <source>Move the cursor to the start of the document</source>
        <translation>移动光标到这一个文檔的起头</translation>
    </message>
    <message>
        <source>Move the cursor to the next character</source>
        <translation>移动光标到下一个字符</translation>
    </message>
    <message>
        <source>JavaScript Prompt - %1</source>
        <translation>JavaScript 提示 ─ %1</translation>
    </message>
    <message>
        <source>Copy Link</source>
        <translation>复制连结</translation>
    </message>
    <message>
        <source>Select to the previous line</source>
        <translation>选择到前一行</translation>
    </message>
    <message>
        <source>Select to the previous word</source>
        <translation>选择到前一个单字</translation>
    </message>
    <message>
        <source>Check Spelling</source>
        <translation>检查拼字</translation>
    </message>
    <message>
        <source>Select to the next character</source>
        <translation>选择到下一个字符</translation>
    </message>
    <message>
        <source>Show Spelling and Grammar</source>
        <translation>显示拼字与文法</translation>
    </message>
    <message>
        <source>Delete to the end of the word</source>
        <translation>删除到此单字的结尾</translation>
    </message>
    <message>
        <source>Direction</source>
        <translation>方向</translation>
    </message>
    <message>
        <source>Select to the end of the line</source>
        <translation>选择到这一行的结尾</translation>
    </message>
    <message>
        <source>Submit</source>
        <comment>Submit (input element) alt text for &lt;input&gt; elements with no alt, title, or value</comment>
        <translation>提交</translation>
    </message>
    <message>
        <source>Choose File</source>
        <translation>选择文件</translation>
    </message>
    <message>
        <source>Scroll up</source>
        <translation>往上滚动条</translation>
    </message>
    <message>
        <source>Clear recent searches</source>
        <translation>清除最近的搜寻</translation>
    </message>
    <message>
        <source>Select to the start of the document</source>
        <translation>选择到这一个文檔的起头</translation>
    </message>
    <message>
        <source>Default</source>
        <translation>默认</translation>
    </message>
    <message>
        <source>Underline</source>
        <translation>底线</translation>
    </message>
    <message>
        <source>Move the cursor to the previous character</source>
        <translation>移动光标到前一个字符</translation>
    </message>
    <message>
        <source>Copy Image</source>
        <translation>复制影像</translation>
    </message>
    <message>
        <source>Select to the end of the document</source>
        <translation>选择到这一个文檔的结尾</translation>
    </message>
    <message>
        <source>Select to the end of the block</source>
        <translation>选择到这一个区块的结尾</translation>
    </message>
    <message>
        <source>Scroll right</source>
        <translation>往右滚动条</translation>
    </message>
    <message>
        <source>No Guesses Found</source>
        <translation>找不到可能的内容</translation>
    </message>
    <message>
        <source>Open Link</source>
        <translation>开启连结</translation>
    </message>
    <message>
        <source>Bad HTTP request</source>
        <translation>不良的 HTTP 请求</translation>
    </message>
    <message>
        <source>Unknown</source>
        <translation>未知</translation>
    </message>
    <message>
        <source>Move the cursor to the previous word</source>
        <translation>移动光标到前一个单字</translation>
    </message>
    <message>
        <source>Move the cursor to the previous line</source>
        <translation>移动光标到前一行</translation>
    </message>
    <message numerus="yes">
        <source>%n file(s)</source>
        <translation>
            <numerusform>%n 个文件</numerusform>
        </translation>
    </message>
    <message>
        <source>Left edge</source>
        <translation>左边缘</translation>
    </message>
    <message>
        <source>Go Forward</source>
        <translation>往前</translation>
    </message>
    <message>
        <source>Page down</source>
        <translation>页面下方</translation>
    </message>
    <message>
        <source>Page left</source>
        <translation>页面左方</translation>
    </message>
    <message>
        <source>This is a searchable index. Enter search keywords: </source>
        <translation>这是可搜寻的索引。请输入关键词: </translation>
    </message>
    <message>
        <source>Select to the previous character</source>
        <translation>选择到前一个字符</translation>
    </message>
    <message>
        <source>Go Back</source>
        <translation>往回</translation>
    </message>
    <message>
        <source>Open in New Window</source>
        <translation>在新窗口开启</translation>
    </message>
    <message>
        <source>Right edge</source>
        <translation>右边缘</translation>
    </message>
    <message>
        <source>Move the cursor to the end of the document</source>
        <translation>移动光标到这一个文檔的结尾</translation>
    </message>
    <message>
        <source>Hide Spelling and Grammar</source>
        <translation>隐藏拼字与文法</translation>
    </message>
    <message>
        <source>%1 (%2x%3 pixels)</source>
        <translation>%1（%2x%3 像素）</translation>
    </message>
    <message>
        <source>Select to the next word</source>
        <translation>选择到下一个单字</translation>
    </message>
    <message>
        <source>Select to the next line</source>
        <translation>选择到下一行</translation>
    </message>
</context>
<context>
    <name>QScrollBar</name>
    <message>
        <source>Top</source>
        <translation>顶端</translation>
    </message>
    <message>
        <source>Scroll down</source>
        <translation>往下滚动条</translation>
    </message>
    <message>
        <source>Scroll here</source>
        <translation>在此滚动条</translation>
    </message>
    <message>
        <source>Scroll left</source>
        <translation>往左滚动条</translation>
    </message>
    <message>
        <source>Line up</source>
        <translation>对上排列</translation>
    </message>
    <message>
        <source>Line down</source>
        <translation>对下排列</translation>
    </message>
    <message>
        <source>Bottom</source>
        <translation>底端</translation>
    </message>
    <message>
        <source>Page up</source>
        <translation>页面上方</translation>
    </message>
    <message>
        <source>Position</source>
        <translation>位置</translation>
    </message>
    <message>
        <source>Page right</source>
        <translation>页面右方</translation>
    </message>
    <message>
        <source>Scroll up</source>
        <translation>往上滚动条</translation>
    </message>
    <message>
        <source>Scroll right</source>
        <translation>往右滚动条</translation>
    </message>
    <message>
        <source>Left edge</source>
        <translation>左边缘</translation>
    </message>
    <message>
        <source>Page down</source>
        <translation>页面下方</translation>
    </message>
    <message>
        <source>Page left</source>
        <translation>页面左方</translation>
    </message>
    <message>
        <source>Right edge</source>
        <translation>右边缘</translation>
    </message>
</context>
<context>
    <name>QInputContext</name>
    <message>
        <source>XIM</source>
        <translation>XIM</translation>
    </message>
    <message>
        <source>Windows input method</source>
        <translation>Windows 输入法</translation>
    </message>
    <message>
        <source>XIM input method</source>
        <translation>XIM 输入法</translation>
    </message>
    <message>
        <source>Mac OS X input method</source>
        <translation>Mac OS X 输入法</translation>
    </message>
</context>
<context>
    <name>QFileDialog</name>
    <message>
        <source>Back</source>
        <translation>返回</translation>
    </message>
    <message>
        <source>File</source>
        <translation>文件</translation>
    </message>
    <message>
        <source>Open</source>
        <translation>开启</translation>
    </message>
    <message>
        <source>&amp;Open</source>
        <translation>&amp;开启</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation>&amp;保存</translation>
    </message>
    <message>
        <source>Drive</source>
        <translation>磁盘</translation>
    </message>
    <message>
        <source>Show </source>
        <translation>显示 </translation>
    </message>
    <message>
        <source>&apos;%1&apos; is write protected.
Do you want to delete it anyway?</source>
        <translation>&apos;%1&apos; 有写入保护。
您确定要删除它吗?</translation>
    </message>
    <message>
        <source>File &amp;name:</source>
        <translation>檔&amp;名:</translation>
    </message>
    <message>
        <source>New Folder</source>
        <translation>新文件夹</translation>
    </message>
    <message>
        <source>Parent Directory</source>
        <translation>父目录</translation>
    </message>
    <message>
        <source>&amp;New Folder</source>
        <translation>&amp;新增文件夹</translation>
    </message>
    <message>
        <source>Remove</source>
        <translation>移除</translation>
    </message>
    <message>
        <source>My Computer</source>
        <translation>我的计算器</translation>
    </message>
    <message>
        <source>Look in:</source>
        <translation>寻找:</translation>
    </message>
    <message>
        <source>Files of type:</source>
        <translation>文件型态:</translation>
    </message>
    <message>
        <source>Find Directory</source>
        <translation>寻找目录</translation>
    </message>
    <message>
        <source>Show &amp;hidden files</source>
        <translation>显示&amp;隐藏档</translation>
    </message>
    <message>
        <source>Are sure you want to delete &apos;%1&apos;?</source>
        <translation>您确定要删除&apos;%1&apos;</translation>
    </message>
    <message>
        <source>Save As</source>
        <translation>另存新檔</translation>
    </message>
    <message>
        <source>%1
Directory not found.
Please verify the correct directory name was given.</source>
        <translation>%1
找不到目录。
请检查目录名称是否正确。</translation>
    </message>
    <message>
        <source>List View</source>
        <translation>列表检视</translation>
    </message>
    <message>
        <source>&amp;Choose</source>
        <translation>&amp;选择</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation>&amp;删除</translation>
    </message>
    <message>
        <source>All Files (*)</source>
        <translation>所有文件 (*)</translation>
    </message>
    <message>
        <source>Directories</source>
        <translation>目录</translation>
    </message>
    <message>
        <source>All Files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <source>&amp;Rename</source>
        <translation>&amp;重新命名</translation>
    </message>
    <message>
        <source>Could not delete directory.</source>
        <translation>无法删除目录。</translation>
    </message>
    <message>
        <source>Directory:</source>
        <translation>目录:</translation>
    </message>
    <message>
        <source>Unknown</source>
        <translation>未知</translation>
    </message>
    <message>
        <source>%1 already exists.
Do you want to replace it?</source>
        <translation>%1 已存在
您要取代它吗?</translation>
    </message>
    <message>
        <source>Forward</source>
        <translation>往前</translation>
    </message>
    <message>
        <source>Recent Places</source>
        <translation>最近的地方</translation>
    </message>
    <message>
        <source>Create New Folder</source>
        <translation>建立新文件夹</translation>
    </message>
    <message>
        <source>Detail View</source>
        <translation>详细检视</translation>
    </message>
    <message>
        <source>%1
File not found.
Please verify the correct file name was given.</source>
        <translation>%1
找不到文件。
请检查档名是否正确。</translation>
    </message>
</context>
<context>
    <name>Q3TextEdit</name>
    <message>
        <source>Cu&amp;t</source>
        <translation>剪&amp;下</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation>&amp;复制</translation>
    </message>
    <message>
        <source>&amp;Redo</source>
        <translation>&amp;重做</translation>
    </message>
    <message>
        <source>&amp;Undo</source>
        <translation>&amp;复原</translation>
    </message>
    <message>
        <source>Clear</source>
        <translation>清除</translation>
    </message>
    <message>
        <source>Paste</source>
        <translation>粘贴</translation>
    </message>
    <message>
        <source>Select All</source>
        <translation>全部选择</translation>
    </message>
</context>
<context>
    <name>QLineEdit</name>
    <message>
        <source>Cu&amp;t</source>
        <translation>剪&amp;下</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation>&amp;复制</translation>
    </message>
    <message>
        <source>&amp;Redo</source>
        <translation>&amp;重做</translation>
    </message>
    <message>
        <source>&amp;Undo</source>
        <translation>&amp;复原</translation>
    </message>
    <message>
        <source>&amp;Paste</source>
        <translation>&amp;粘贴</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Select All</source>
        <translation>全部选择</translation>
    </message>
</context>
<context>
    <name>QTextControl</name>
    <message>
        <source>Cu&amp;t</source>
        <translation>剪&amp;下</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation>&amp;复制</translation>
    </message>
    <message>
        <source>&amp;Redo</source>
        <translation>&amp;重做</translation>
    </message>
    <message>
        <source>&amp;Undo</source>
        <translation>&amp;复原</translation>
    </message>
    <message>
        <source>&amp;Paste</source>
        <translation>&amp;粘贴</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Select All</source>
        <translation>全部选择</translation>
    </message>
    <message>
        <source>Copy &amp;Link Location</source>
        <translation>复制&amp;链接地址</translation>
    </message>
</context>
<context>
    <name>QDockWidget</name>
    <message>
        <source>Dock</source>
        <translation>嵌入</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Float</source>
        <translation>飘浮</translation>
    </message>
</context>
<context>
    <name>QDialog</name>
    <message>
        <source>Done</source>
        <translation>完成</translation>
    </message>
    <message>
        <source>What&apos;s This?</source>
        <translation>这是&apos;什么?</translation>
    </message>
</context>
<context>
    <name>QWizard</name>
    <message>
        <source>Done</source>
        <translation>完成</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>说明</translation>
    </message>
    <message>
        <source>&amp;Help</source>
        <translation>&amp;说明</translation>
    </message>
    <message>
        <source>&amp;Next</source>
        <translation>&amp;下一个</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Commit</source>
        <translation>提交</translation>
    </message>
    <message>
        <source>Continue</source>
        <translation>继续</translation>
    </message>
    <message>
        <source>&amp;Finish</source>
        <translation>&amp;完成</translation>
    </message>
    <message>
        <source>&amp;Next &gt;</source>
        <translation>&amp;下一个 &gt;＞</translation>
    </message>
    <message>
        <source>Go Back</source>
        <translation>往回</translation>
    </message>
    <message>
        <source>&lt; &amp;Back</source>
        <translation>＜&lt; &amp;返回</translation>
    </message>
</context>
<context>
    <name>QPageSetupWidget</name>
    <message>
        <source>Form</source>
        <translation>窗体</translation>
    </message>
    <message>
        <source>bottom margin</source>
        <translation>下缘</translation>
    </message>
    <message>
        <source>Paper</source>
        <translation>纸张</translation>
    </message>
    <message>
        <source>Paper source:</source>
        <translation>纸张来源:</translation>
    </message>
    <message>
        <source>Centimeters (cm)</source>
        <translation>公分</translation>
    </message>
    <message>
        <source>right margin</source>
        <translation>右缘</translation>
    </message>
    <message>
        <source>Margins</source>
        <translation>边缘</translation>
    </message>
    <message>
        <source>Landscape</source>
        <translation>横向</translation>
    </message>
    <message>
        <source>Width:</source>
        <translation>宽度:</translation>
    </message>
    <message>
        <source>Orientation</source>
        <translation>方向</translation>
    </message>
    <message>
        <source>Portrait</source>
        <translation>纵向</translation>
    </message>
    <message>
        <source>top margin</source>
        <translation>上缘</translation>
    </message>
    <message>
        <source>left margin</source>
        <translation>左缘</translation>
    </message>
    <message>
        <source>Page size:</source>
        <translation>纸张大小:</translation>
    </message>
    <message>
        <source>Reverse portrait</source>
        <translation>反序纵向</translation>
    </message>
    <message>
        <source>Millimeters (mm)</source>
        <translation>公厘</translation>
    </message>
    <message>
        <source>Points (pt)</source>
        <translation>点</translation>
    </message>
    <message>
        <source>Inches (in)</source>
        <translation>英吋</translation>
    </message>
    <message>
        <source>Reverse landscape</source>
        <translation>反序横向</translation>
    </message>
    <message>
        <source>Height:</source>
        <translation>高度:</translation>
    </message>
</context>
<context>
    <name>QPrintPropertiesWidget</name>
    <message>
        <source>Form</source>
        <translation>窗体</translation>
    </message>
    <message>
        <source>Page</source>
        <translation>页面</translation>
    </message>
    <message>
        <source>Advanced</source>
        <translation>高级</translation>
    </message>
</context>
<context>
    <name>QMdiSubWindow</name>
    <message>
        <source>Help</source>
        <translation>说明</translation>
    </message>
    <message>
        <source>Menu</source>
        <translation>菜单</translation>
    </message>
    <message>
        <source>&amp;Move</source>
        <translation>&amp;移动</translation>
    </message>
    <message>
        <source>&amp;Size</source>
        <translation>&amp;大小</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Minimize</source>
        <translation>最小化</translation>
    </message>
    <message>
        <source>Shade</source>
        <translation>遮蔽</translation>
    </message>
    <message>
        <source>Stay on &amp;Top</source>
        <translation>留在&amp;顶端</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation>&amp;关闭</translation>
    </message>
    <message>
        <source>- [%1]</source>
        <translation>- [%1]</translation>
    </message>
    <message>
        <source>%1 - [%2]</source>
        <translation>%1 - [%2]</translation>
    </message>
    <message>
        <source>&amp;Restore</source>
        <translation>&amp;回复</translation>
    </message>
    <message>
        <source>Restore</source>
        <translation>回复</translation>
    </message>
    <message>
        <source>Maximize</source>
        <translation>最大化</translation>
    </message>
    <message>
        <source>Unshade</source>
        <translation>取消遮蔽</translation>
    </message>
    <message>
        <source>Mi&amp;nimize</source>
        <translation>最小&amp;化</translation>
    </message>
    <message>
        <source>Ma&amp;ximize</source>
        <translation>最大&amp;化</translation>
    </message>
    <message>
        <source>Restore Down</source>
        <translation>向下恢复</translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <source>Home</source>
        <translation>首页</translation>
    </message>
    <message>
        <source>Protocol error: packet of size 0 received</source>
        <translation>协议错误：接收到大小为 0 的封包</translation>
    </message>
    <message>
        <source>Invalid URI: %1</source>
        <translation>不合法的网址：%1</translation>
    </message>
    <message>
        <source>Socket error on %1: %2</source>
        <translation>%1 上发生 socket 错误：%2</translation>
    </message>
    <message>
        <source>No host name given</source>
        <translation>未指定主机</translation>
    </message>
    <message>
        <source>Read error reading from %1: %2</source>
        <translation>从 %1 读取错误：%2</translation>
    </message>
    <message>
        <source>Remote host closed the connection prematurely on %1</source>
        <translation>于 %1 上远程主机关闭了不正常的联机</translation>
    </message>
    <message>
        <source>Operation not supported on %1</source>
        <translation>在 %1 上不支持此操作</translation>
    </message>
    <message>
        <source>Write error writing to %1: %2</source>
        <translation>写入 %1 时发生错误：%2</translation>
    </message>
</context>
<context>
    <name>QDirModel</name>
    <message>
        <source>Kind</source>
        <translation>种类</translation>
    </message>
    <message>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <source>Size</source>
        <translation>大小</translation>
    </message>
    <message>
        <source>Type</source>
        <translation>型态</translation>
    </message>
    <message>
        <source>Date Modified</source>
        <translation>变更日期</translation>
    </message>
</context>
<context>
    <name>QFileSystemModel</name>
    <message>
        <source>Kind</source>
        <translation>种类</translation>
    </message>
    <message>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <source>Size</source>
        <translation>大小</translation>
    </message>
    <message>
        <source>Type</source>
        <translation>型态</translation>
    </message>
    <message>
        <source>%1 GB</source>
        <translation>%1 GB</translation>
    </message>
    <message>
        <source>%1 KB</source>
        <translation>%1 KB</translation>
    </message>
    <message>
        <source>%1 MB</source>
        <translation>%1 MB</translation>
    </message>
    <message>
        <source>%1 TB</source>
        <translation>%1 TB</translation>
    </message>
    <message>
        <source>&lt;b&gt;The name &quot;%1&quot; can not be used.&lt;/b&gt;&lt;p&gt;Try using another name, with fewer characters or no punctuations marks.</source>
        <translation>&lt;b&gt;无法使用名称 &quot;%1&quot;。&lt;/b&gt;&lt;p&gt;请使用其它名称，字符数少一点，或是不要有标点符号。</translation>
    </message>
    <message>
        <source>%1 bytes</source>
        <translation>%1 比特组</translation>
    </message>
    <message>
        <source>My Computer</source>
        <translation>我的计算器</translation>
    </message>
    <message>
        <source>Computer</source>
        <translation>计算器</translation>
    </message>
    <message>
        <source>Invalid filename</source>
        <translation>不合法的檔名</translation>
    </message>
    <message>
        <source>Date Modified</source>
        <translation>变更日期</translation>
    </message>
</context>
<context>
    <name>QDoubleSpinBox</name>
    <message>
        <source>Less</source>
        <translation>较少</translation>
    </message>
    <message>
        <source>More</source>
        <translation>更多</translation>
    </message>
</context>
<context>
    <name>QSpinBox</name>
    <message>
        <source>Less</source>
        <translation>较少</translation>
    </message>
    <message>
        <source>More</source>
        <translation>更多</translation>
    </message>
</context>
<context>
    <name>QPPDOptionsModel</name>
    <message>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <source>Value</source>
        <translation>值</translation>
    </message>
</context>
<context>
    <name>QComboBox</name>
    <message>
        <source>Open</source>
        <translation>开启</translation>
    </message>
    <message>
        <source>True</source>
        <translation>真</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>False</source>
        <translation>假</translation>
    </message>
</context>
<context>
    <name>QMenu</name>
    <message>
        <source>Open</source>
        <translation>开启</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Execute</source>
        <translation>执行</translation>
    </message>
</context>
<context>
    <name>QPushButton</name>
    <message>
        <source>Open</source>
        <translation>开启</translation>
    </message>
</context>
<context>
    <name>QToolButton</name>
    <message>
        <source>Open</source>
        <translation>开启</translation>
    </message>
    <message>
        <source>Press</source>
        <translation>按下</translation>
    </message>
</context>
<context>
    <name>QUndoGroup</name>
    <message>
        <source>Redo</source>
        <translation>重做</translation>
    </message>
    <message>
        <source>Undo</source>
        <translation>复原</translation>
    </message>
</context>
<context>
    <name>QUndoStack</name>
    <message>
        <source>Redo</source>
        <translation>重做</translation>
    </message>
    <message>
        <source>Undo</source>
        <translation>复原</translation>
    </message>
</context>
<context>
    <name>Q3DataTable</name>
    <message>
        <source>True</source>
        <translation>真</translation>
    </message>
    <message>
        <source>False</source>
        <translation>假</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Insert</source>
        <translation>插入</translation>
    </message>
    <message>
        <source>Update</source>
        <translation>更新</translation>
    </message>
</context>
<context>
    <name>QSslSocket</name>
    <message>
        <source>Error creating SSL session: %1</source>
        <translation>建立 SSL 会话时发生错误：%1</translation>
    </message>
    <message>
        <source>Error creating SSL session, %1</source>
        <translation>建立 SSL 会话时发生错误：%1</translation>
    </message>
    <message>
        <source>Cannot provide a certificate with no key, %1</source>
        <translation>没有密钥无法提供凭证：%1</translation>
    </message>
    <message>
        <source>Unable to write data: %1</source>
        <translation>无法写入数据：%1</translation>
    </message>
    <message>
        <source>Error during SSL handshake: %1</source>
        <translation>SSL 同步时发生错误：%1</translation>
    </message>
    <message>
        <source>Error loading local certificate, %1</source>
        <translation>加载本地凭证时发生错误：%1</translation>
    </message>
    <message>
        <source>Invalid or empty cipher list (%1)</source>
        <translation>不合法或空白的加密清单（%1）</translation>
    </message>
    <message>
        <source>Private key does not certificate public key, %1</source>
        <translation>私钥无法认证公钥，%1</translation>
    </message>
    <message>
        <source>Error creating SSL context (%1)</source>
        <translation>建立 SSL 内文时发生错误（%1）</translation>
    </message>
    <message>
        <source>Error while reading: %1</source>
        <translation>读取时发生错误：%1</translation>
    </message>
    <message>
        <source>Error loading private key, %1</source>
        <translation>加载私钥时发生错误：%1</translation>
    </message>
</context>
<context>
    <name>QLocalSocket</name>
    <message>
        <source>%1: Connection error</source>
        <translation>%1：联机错误</translation>
    </message>
    <message>
        <source>%1: Connection refused</source>
        <translation>%1：联机被拒</translation>
    </message>
    <message>
        <source>%1: Unknown error %2</source>
        <translation>%1：未知的错误 %2</translation>
    </message>
    <message>
        <source>%1: Socket access error</source>
        <translation>%1：Socket 地址错误</translation>
    </message>
    <message>
        <source>%1: Socket resource error</source>
        <translation>%1：Socket 资源错误</translation>
    </message>
    <message>
        <source>%1: The socket operation is not supported</source>
        <translation>%1：socket 操作未支持</translation>
    </message>
    <message>
        <source>%1: Invalid name</source>
        <translation>%1：不合法的名称</translation>
    </message>
    <message>
        <source>%1: Unknown error</source>
        <translation>%1：未知的错误</translation>
    </message>
    <message>
        <source>%1: Socket operation timed out</source>
        <translation>%1：Socket 操作逾时</translation>
    </message>
    <message>
        <source>%1: Datagram too large</source>
        <translation>%1：数据报过大</translation>
    </message>
    <message>
        <source>%1: Remote closed</source>
        <translation>%1：远程已关闭</translation>
    </message>
</context>
<context>
    <name>QtXmlPatterns</name>
    <message>
        <source>A comment cannot contain %1</source>
        <translation>批注不能包含 %1</translation>
    </message>
    <message>
        <source>Version %1 is not supported. The supported XQuery version is 1.0.</source>
        <translation>版本 %1 未支持。支持的 XQuery 版本为 1.0。</translation>
    </message>
    <message>
        <source>The root node of the second argument to function %1 must be a document node. %2 is not a document node.</source>
        <translation>函式 %1 的第二个参数的根节点必须是文檔节点。%2 不是文檔节点。</translation>
    </message>
    <message>
        <source>The parameter %1 is required, but no corresponding %2 is supplied.</source>
        <translation>需要参数 %1，但是没有提供相关的 %2。</translation>
    </message>
    <message>
        <source>Namespace declarations must occur before function, variable, and option declarations.</source>
        <translation>命名空间宣告必须在函式、变量与选项宣告之前。</translation>
    </message>
    <message>
        <source>empty</source>
        <translation>空白</translation>
    </message>
    <message>
        <source>The namespace URI cannot be the empty string when binding to a prefix, %1.</source>
        <translation>要与前置字符串 %1 结合的命名空间网址不能是空字符串。</translation>
    </message>
    <message>
        <source>A comment cannot end with a %1.</source>
        <translation>批注不能以 %1 做结尾。</translation>
    </message>
    <message>
        <source>Top level stylesheet elements must be in a non-null namespace, which %1 isn&apos;t.</source>
        <translation>顶层样式表单元素必须是非空白的命名空间，而 %1 不是。</translation>
    </message>
    <message>
        <source>Integer division (%1) by zero (%2) is undefined.</source>
        <translation>整数除法 %1 零除（%2）的行为未定义。</translation>
    </message>
    <message>
        <source>A library module cannot be evaluated directly. It must be imported from a main module.</source>
        <translation>不能直接计算函式模块。必须要从主模块汇入。</translation>
    </message>
    <message>
        <source>Time %1:%2:%3.%4 is invalid.</source>
        <translation>时间 %1:%2:%3.%4 不合法。</translation>
    </message>
    <message>
        <source>Attribute %1 cannot appear on the element %2. Only the standard attributes can appear.</source>
        <translation>属性 %1 不能出现在元素 %2。只能有标准属性。</translation>
    </message>
    <message>
        <source>A value of type %1 must contain an even number of digits. The value %2 does not.</source>
        <translation>型态 %1 的值必须包含偶数个数字。数值 %2 未符合此条件。</translation>
    </message>
    <message>
        <source>Modulus division (%1) by zero (%2) is undefined.</source>
        <translation>余数除法 %1 零除（%2）的行为未定义。</translation>
    </message>
    <message>
        <source>No function with signature %1 is available</source>
        <translation>没有签章为 %1 的函式可使用</translation>
    </message>
    <message>
        <source>None of the pragma expressions are supported. Therefore, a fallback expression must be present</source>
        <translation>未支援 pragma 叙述。因次，必须有默认的叙述</translation>
    </message>
    <message>
        <source>In the replacement string, %1 can only be used to escape itself or %2, not %3</source>
        <translation>在取代字符串中，%1 只能用于自身或 %2 的脱逸，而非 %3</translation>
    </message>
    <message>
        <source>The codepoint %1, occurring in %2 using encoding %3, is an invalid XML character.</source>
        <translation>在 %2 内的代码点 %1（编码 %3）是一个不合法的 XML 字符。</translation>
    </message>
    <message>
        <source>Network timeout.</source>
        <translation>网络逾时。</translation>
    </message>
    <message>
        <source>No casting is possible with %1 as the target type.</source>
        <translation>不能转换到 %1 型态。</translation>
    </message>
    <message>
        <source>The Schema Import feature is not supported, and therefore %1 declarations cannot occur.</source>
        <translation>机制汇入功能未支持，因此有 %1 个宣告无法达成。</translation>
    </message>
    <message>
        <source>Attribute %1 and %2 are mutually exclusive.</source>
        <translation>属性 %1 与 %2 彼此互斥。</translation>
    </message>
    <message>
        <source>Parse error: %1</source>
        <translation>剖析错误：%1</translation>
    </message>
    <message>
        <source>If the first argument is the empty sequence or a zero-length string (no namespace), a prefix cannot be specified. Prefix %1 was specified.</source>
        <translation>如果第一个参数是空序列，或是长度为 0 的字符串（没有命名空间），则无法指定前置字符串。但是您指定了 %1。</translation>
    </message>
    <message>
        <source>In an XSL-T pattern, the first argument to function %1 must be a literal or a variable reference, when used for matching.</source>
        <translation>在 XSL-T 样式内，函式 %1 的第一个参数必须是文本或变量参考，以便用于比对。</translation>
    </message>
    <message>
        <source>At least one component must be present.</source>
        <translation>必须表达至少一个组件。</translation>
    </message>
    <message>
        <source>In a namespace constructor, the value for a namespace value cannot be an empty string.</source>
        <translation>在命名空间建构子中，命名空间的值不能是空字符串。</translation>
    </message>
    <message>
        <source>An attribute by name %1 has already been created.</source>
        <translation>名为 %1 的属性已被建立。</translation>
    </message>
    <message>
        <source>An argument by name %1 has already been declared. Every argument name must be unique.</source>
        <translation>名称为 %1 的参数已被宣告。每个参数名称必须唯一。</translation>
    </message>
    <message>
        <source>%1 is an invalid flag for regular expressions. Valid flags are:</source>
        <translation>%1 是正规表示式中不合法的旗标。合法的旗标有:</translation>
    </message>
    <message>
        <source>At least one %1-element must occur inside %2.</source>
        <translation>至少一个元素 %1 要出现在 %2 之内。</translation>
    </message>
    <message>
        <source>Only the Unicode Codepoint Collation is supported(%1). %2 is unsupported.</source>
        <translation>只支援 Unicode Codepoint Collation（%1）。%2 未支援。</translation>
    </message>
    <message>
        <source>Matches are case insensitive</source>
        <translation>比对为区分大小写</translation>
    </message>
    <message>
        <source>The name of an extension expression must be in a namespace.</source>
        <translation>延伸叙述的名称必须在命名空间内。</translation>
    </message>
    <message>
        <source>Each name of a template parameter must be unique; %1 is duplicated.</source>
        <translation>每个样本参数的名称必须唯一；%1 已经被使用。</translation>
    </message>
    <message>
        <source>At least one mode must be specified in the %1-attribute on element %2.</source>
        <translation>在元素 %2 的 %1 属性中至少要指定一个模式。</translation>
    </message>
    <message>
        <source>%1 matches newline characters</source>
        <translation>%1 符合了换行字符</translation>
    </message>
    <message>
        <source>Year %1 is invalid because it begins with %2.</source>
        <translation>年份 %1 不合法，因为是从 %2 开始的。</translation>
    </message>
    <message>
        <source>The second argument to %1 cannot be of type %2. It must be of type %3, %4, or %5.</source>
        <translation>呼叫 %1 的第二个参数不能是 %2 型态。必须是 %3、%4 或 %5 型态。</translation>
    </message>
    <message>
        <source>Element %1 cannot have children.</source>
        <translation>元素 %1 不能有子元素。</translation>
    </message>
    <message>
        <source>Attribute %1 cannot appear on the element %2. Only %3 is allowed, and the standard attributes.</source>
        <translation>属性 %1 不能出现在元素 %2。只能有 %3 以及标准属性。</translation>
    </message>
    <message>
        <source>Only one %1-element can appear.</source>
        <translation>只能出现一个元素 %1。</translation>
    </message>
    <message>
        <source>The name for a computed attribute cannot have the namespace URI %1 with the local name %2.</source>
        <translation>在已计算属性的名称不能同时有命名空间网址 %1 与本地端名称 %2。</translation>
    </message>
    <message>
        <source>A positional predicate must evaluate to a single numeric value.</source>
        <translation>位置谓词必须能计算出单一的数值。</translation>
    </message>
    <message>
        <source>Element %1 can&apos;t be serialized because it appears outside the document element.</source>
        <translation>元素 %1 无法串行化，因为似乎是在文文件元素之外。</translation>
    </message>
    <message>
        <source>%1 and %2 match the start and end of a line.</source>
        <translation>%1 与 %2 符合了一行的开始与结尾。</translation>
    </message>
    <message>
        <source>Running an XSL-T 1.0 stylesheet with a 2.0 processor.</source>
        <translation>使用 2.0 处理器执行 XSL-T 1.0 样式表单中。</translation>
    </message>
    <message>
        <source>A stylesheet function must have a prefixed name.</source>
        <translation>样式表单函式必须有前置名称。</translation>
    </message>
    <message>
        <source>%1 cannot be retrieved</source>
        <translation>%1 无法取得</translation>
    </message>
    <message>
        <source>It&apos;s not possible to cast the value %1 of type %2 to %3</source>
        <translation>无法&apos;转换型态 %2 的数值 %1 到 %3</translation>
    </message>
    <message>
        <source>The value of the XSL-T version attribute must be a value of type %1, which %2 isn&apos;t.</source>
        <translation>XLS-T 版本属性的值必须是型态 %1 的值，而 %2 不&apos;是。</translation>
    </message>
    <message>
        <source>The prefix %1 cannot be bound.</source>
        <translation>前置字符串 %1 不能被结合。</translation>
    </message>
    <message>
        <source>The prefix must be a valid %1, which %2 is not.</source>
        <translation>前置字符串必须是合法的 %1，但 %2 不是。</translation>
    </message>
    <message>
        <source>The keyword %1 cannot occur with any other mode name.</source>
        <translation>关键词 %1 不能与任何其它模式名称一起存在。</translation>
    </message>
    <message>
        <source>Type error in cast, expected %1, received %2.</source>
        <translation>转换型态错误，应为 %1 但接收到 %2。</translation>
    </message>
    <message>
        <source>%1 is not a valid numeric literal.</source>
        <translation>%1 不是合法的数值。</translation>
    </message>
    <message numerus="yes">
        <source>%1 takes at most %n argument(s). %2 is therefore invalid.</source>
        <translation>
            <numerusform>%1 最多只能有 %n 个参数，因此 %2 是不合法的。</numerusform>
        </translation>
    </message>
    <message>
        <source>Circularity detected</source>
        <translation>侦测到环状</translation>
    </message>
    <message>
        <source>A variable by name %1 has already been declared.</source>
        <translation>名为 %1 的变量已被宣告。</translation>
    </message>
    <message>
        <source>The prefix %1 can not be bound. By default, it is already bound to the namespace %2.</source>
        <translation>前置字符串 %1 不能被结合。默认它已与命名空间 %2 结合。</translation>
    </message>
    <message>
        <source>An %1-attribute must have a valid %2 as value, which %3 isn&apos;t.</source>
        <translation>属性 %1 必须以合法的 %2 为值，而 %3 是不&apos;合法的。</translation>
    </message>
    <message>
        <source>If element %1 has no attribute %2, it cannot have attribute %3 or %4.</source>
        <translation>若元素 %1 没有属性 %2，则也不能有属性 %3 或 %4。</translation>
    </message>
    <message>
        <source>A function already exists with the signature %1.</source>
        <translation>已经有签章为 %1 的函式存在。</translation>
    </message>
    <message>
        <source>When casting to %1 from %2, the source value cannot be %3.</source>
        <translation>从 %2 转换型态为 %1 的时候，来源数值不能是 %3。</translation>
    </message>
    <message>
        <source>Attribute %1 can&apos;t be serialized because it appears at the top level.</source>
        <translation>属性元素 %1 无法串行化，因为似乎是在顶层。</translation>
    </message>
    <message>
        <source>No comparisons can be done involving the type %1.</source>
        <translation>包含型态 %1 时不能做比较。</translation>
    </message>
    <message>
        <source>No value is available for the external variable by name %1.</source>
        <translation>名为 %1 的外部变数没有可用的值。</translation>
    </message>
    <message>
        <source>The value of attribute %1 must of type %2, which %3 isn&apos;t.</source>
        <translation>属性 %1 的值必须为型态 %2，但 %3 不&apos;是。</translation>
    </message>
    <message>
        <source>The item %1 did not match the required type %2.</source>
        <translation>项目 %1 未符合需要的型态 %2。</translation>
    </message>
    <message>
        <source>Element %1 cannot have a sequence constructor.</source>
        <translation>元素 %1不能有序列建构子。</translation>
    </message>
    <message>
        <source>When attribute %1 is present on %2, a sequence constructor cannot be used.</source>
        <translation>当属性 %1 出现在 %2 内时，不能使用序列建构子。</translation>
    </message>
    <message>
        <source>one or more</source>
        <translation>一个以上</translation>
    </message>
    <message>
        <source>The encoding %1 is invalid. It must contain Latin characters only, must not contain whitespace, and must match the regular expression %2.</source>
        <translation>编码 %1 不合法。必须只能包含拉丁字符，不含空白，并且要符合正规表示式 %2。</translation>
    </message>
    <message numerus="yes">
        <source>%1 requires at least %n argument(s). %2 is therefore invalid.</source>
        <translation>
            <numerusform>%1 至少需要 %n 个参数，因此 %2 是不合法的。</numerusform>
        </translation>
    </message>
    <message>
        <source>The target name in a processing instruction cannot be %1 in any combination of upper and lower case. Therefore, is %2 invalid.</source>
        <translation>处理指令的目标名称不能是任何大小写组合的 %1。因此，%2 是不合法的值。</translation>
    </message>
    <message>
        <source>The focus is undefined.</source>
        <translation>焦点未定义。</translation>
    </message>
    <message>
        <source>%1 is an unknown schema type.</source>
        <translation>%1 是未知的机制型态。</translation>
    </message>
    <message>
        <source>The value for attribute %1 on element %2 must either be %3 or %4, not %5.</source>
        <translation>元素 %2 内属性 %1 的值必须是 %3 或 %4，而不是 %5。</translation>
    </message>
    <message>
        <source>In the replacement string, %1 must be followed by at least one digit when not escaped.</source>
        <translation>在取代字符串中，在未脱逸的情形下 %1 必须至少跟着一位数字。</translation>
    </message>
    <message>
        <source>In an XSL-T pattern, axis %1 cannot be used, only axis %2 or %3 can.</source>
        <translation>在 XSL-T 样式内，不能用 %1 轴，只能用 %2 或 %3。</translation>
    </message>
    <message>
        <source>The namespace for a user defined function cannot be empty (try the predefined prefix %1 which exists for cases like this)</source>
        <translation>用户定义函式的命名空间不能为空白（请试着用预先定义的前置字符串 %1）</translation>
    </message>
    <message>
        <source>The first operand in an integer division, %1, cannot be infinity (%2).</source>
        <translation>整数除法的第一个运算对象 %1 不能是无限大（%2）。</translation>
    </message>
    <message>
        <source>%1 is not a valid value of type %2.</source>
        <translation>%1 不是合法的 %2 型态的值。</translation>
    </message>
    <message>
        <source>Multiplication of a value of type %1 by %2 or %3 (plus or minus infinity) is not allowed.</source>
        <translation>将型态 %1 乘以 %2 或 %3（正或负无限大）是不允许的。</translation>
    </message>
    <message>
        <source>The variable %1 is unused</source>
        <translation>变量 %1 未使用</translation>
    </message>
    <message>
        <source>The %1-axis is unsupported in XQuery</source>
        <translation>XQuery 中未支援 %1 轴</translation>
    </message>
    <message>
        <source>A direct element constructor is not well-formed. %1 is ended with %2.</source>
        <translation>直接元素建构器没有完整产生。%1 以 %2 结束。</translation>
    </message>
    <message>
        <source>Dividing a value of type %1 by %2 or %3 (plus or minus zero) is not allowed.</source>
        <translation>将型态 %1 除以 %2 或 %3（正或负零）是不允许的。</translation>
    </message>
    <message>
        <source>Attribute %1 cannot have the value %2.</source>
        <translation>属性 %1 的值不能为 %2。</translation>
    </message>
    <message>
        <source>It will not be possible to retrieve %1.</source>
        <translation>无法取得 %1。</translation>
    </message>
    <message>
        <source>In an XSL-T pattern, function %1 cannot have a third argument.</source>
        <translation>在 XSL-T 样式内，函式 %1 的不能有第三个参数。</translation>
    </message>
    <message>
        <source>The namespace URI in the name for a computed attribute cannot be %1.</source>
        <translation>在已计算属性的名称的命名空间网址不能是 %1。</translation>
    </message>
    <message>
        <source>%1 is not a valid target name in a processing instruction. It must be a %2 value, e.g. %3.</source>
        <translation>%1 不是一个合法的处理指令的目标名称。必须是 %2 的值，例如 %3。</translation>
    </message>
    <message>
        <source>%1 is an complex type. Casting to complex types is not possible. However, casting to atomic types such as %2 works.</source>
        <translation>%1 是复数型态，无法转换成复数型态。然而，转换为原型态，如 %2 是可行的。</translation>
    </message>
    <message>
        <source>zero or one</source>
        <translation>0 或 1 个</translation>
    </message>
    <message>
        <source>No operand in an integer division, %1, can be %2.</source>
        <translation>整数除法没有运作对象，%1，可以是 %2。</translation>
    </message>
    <message>
        <source>The element with local name %1 does not exist in XSL-T.</source>
        <translation>有本地名称 %1 的元素在 XSL-T 内不存在。</translation>
    </message>
    <message>
        <source>Two namespace declaration attributes have the same name: %1.</source>
        <translation>有两个命名空间宣告的属性有相同的名称：%1。</translation>
    </message>
    <message>
        <source>Effective Boolean Value cannot be calculated for a sequence containing two or more atomic values.</source>
        <translation>实际布尔值（Effective Boolean）无法用在两个或两个以上的原数值（atomic value）的计算。</translation>
    </message>
    <message>
        <source>%1 is an invalid %2</source>
        <translation>%1 是不合法的 %2</translation>
    </message>
    <message>
        <source>The first argument to %1 cannot be of type %2. It must be a numeric type, xs:yearMonthDuration or xs:dayTimeDuration.</source>
        <translation>呼叫 %1 的第一个参数不能是 %2 型态。必须是数值型态，xs.yearMonthDuration 或 xs.dayTimeDuration。</translation>
    </message>
    <message>
        <source>Division (%1) by zero (%2) is undefined.</source>
        <translation>除法 %1 零除（%2）的行为未定义。</translation>
    </message>
    <message>
        <source>No template by name %1 exists.</source>
        <translation>没有名为 %1 的样本存在。</translation>
    </message>
    <message>
        <source>The attribute %1 must appear on element %2.</source>
        <translation>属性 %1 必须在元素 %2 内出现。</translation>
    </message>
    <message>
        <source>An attribute by name %1 has already appeared on this element.</source>
        <translation>名为 %1 的属性已出现在此元素。</translation>
    </message>
    <message>
        <source>The default collection is undefined</source>
        <translation>默认的收藏未定义</translation>
    </message>
    <message>
        <source>Only the prefix %1 can be bound to %2 and vice versa.</source>
        <translation>只有前置字符串 %1 能与 %2 结合。反之亦然。</translation>
    </message>
    <message>
        <source>Value %1 of type %2 exceeds maximum (%3).</source>
        <translation>型态 %2 的数值 %1 已超过最大值（%3）。</translation>
    </message>
    <message>
        <source>Whitespace characters are removed, except when they appear in character classes</source>
        <translation>空格符已移除，除非它们出现在字符类别</translation>
    </message>
    <message>
        <source>Casting to %1 is not possible because it is an abstract type, and can therefore never be instantiated.</source>
        <translation>无法转换到 %1 因为它是一个抽象型态，不能被实体化。</translation>
    </message>
    <message>
        <source>Operator %1 cannot be used on type %2.</source>
        <translation>操作元 %1 不能用于型态 %2。</translation>
    </message>
    <message>
        <source>The namespace %1 is reserved; therefore user defined functions may not use it. Try the predefined prefix %2, which exists for these cases.</source>
        <translation>命名空间 %1 已被保留，因此用户定义函式不能使用它。请试试预定义前置字符串 %2。</translation>
    </message>
    <message>
        <source>The target namespace of a %1 cannot be empty.</source>
        <translation>%1 的目标命名空间不能是空的。</translation>
    </message>
    <message>
        <source>%1 must be followed by %2 or %3, not at the end of the replacement string.</source>
        <translation>%1 后面必须跟着 %2 或 %3，而非取代字符串的结尾。</translation>
    </message>
    <message>
        <source>%1 is an invalid namespace URI.</source>
        <translation>%1 是不合法的命名空间网址。</translation>
    </message>
    <message>
        <source>The attribute %1 cannot appear on %2, when it is a child of %3.</source>
        <translation>属性 %1 不能出现在 %2，因为它是 %3 的子元素。</translation>
    </message>
    <message>
        <source>The attribute %1 can only appear on the first %2 element.</source>
        <translation>属性 %1 只能出现在前 %2 个元素内。</translation>
    </message>
    <message>
        <source>Element %1 must have either a %2-attribute or a sequence constructor.</source>
        <translation>元素 %1 必须至少有一个属性 %2 或一个序列建构子。</translation>
    </message>
    <message>
        <source>Module imports must occur before function, variable, and option declarations.</source>
        <translation>模块汇入必须在函式、变量与选项宣告之前。</translation>
    </message>
    <message>
        <source>Day %1 is outside the range %2..%3.</source>
        <translation>日期 %1 已超出 %2 到 %3 的范围。</translation>
    </message>
    <message>
        <source>%1 contains octets which are disallowed in the requested encoding %2.</source>
        <translation>%1 包含了在要求的编码 %2 内不允许的八进制值。</translation>
    </message>
    <message>
        <source>When a parameter is required, a default value cannot be supplied through a %1-attribute or a sequence constructor.</source>
        <translation>当需要参数时，不能透过属性 %1 或序列建构子提供默认值。</translation>
    </message>
    <message>
        <source>In an XSL-T pattern, the first argument to function %1 must be a string literal, when used for matching.</source>
        <translation>在 XSL-T 样式内，函式 %1 的第一个参数必须是字符串，以便用于比对。</translation>
    </message>
    <message>
        <source>Text nodes are not allowed at this location.</source>
        <translation>文本节点不能在此位置。</translation>
    </message>
    <message>
        <source>A value of type %1 cannot be a predicate. A predicate must have either a numeric type or an Effective Boolean Value type.</source>
        <translation>型态 %1 的值不能是谓词（predicate）。谓词必须是数值型态，或是实际布尔值。</translation>
    </message>
    <message>
        <source>%1 is not a valid name for a processing-instruction.</source>
        <translation>%1 不是处理指令的合法名称。</translation>
    </message>
    <message>
        <source>%1 was called.</source>
        <translation>%1 已被呼叫。</translation>
    </message>
    <message>
        <source>It&apos;s not possible to add attributes after any other kind of node.</source>
        <translation>不能在&apos;任何其它种类的节点后面加入属性。</translation>
    </message>
    <message>
        <source>At least one %1-element must occur before %2.</source>
        <translation>至少一个元素 %1 要出现在 %2 之前。</translation>
    </message>
    <message>
        <source>The normalization form %1 is unsupported. The supported forms are %2, %3, %4, and %5, and none, i.e. the empty string (no normalization).</source>
        <translation>未支持常态化窗体 %1。支持的窗体有 %2、%3、%4、%5，以及无（也就是空字符串，未常态化）。</translation>
    </message>
    <message>
        <source>When casting to %1 or types derived from it, the source value must be of the same type, or it must be a string literal. Type %2 is not allowed.</source>
        <translation>转换为型态 %1 或其衍生型态时，来源数值必须是相同型态，或者是字符串。型态 %2 是不被允许的。</translation>
    </message>
    <message>
        <source>A parameter in a function cannot be declared to be a tunnel.</source>
        <translation>函式内的参数不能被宣告为通道（tunnel）。</translation>
    </message>
    <message>
        <source>XSL-T attributes on XSL-T elements must be in the null namespace, not in the XSL-T namespace which %1 is.</source>
        <translation>XSL-T 元素内的 XSL-T 属性必须放在空（null）的命名空间，而不是像 %1 在 XSL-T 命名空间。</translation>
    </message>
    <message>
        <source>The namespace of a user defined function in a library module must be equivalent to the module namespace. In other words, it should be %1 instead of %2</source>
        <translation>在函式模块中的用户定义函式的命名空间必须与模块的命名空间相同。也就是，应该为 %1 而不是 %2</translation>
    </message>
    <message>
        <source>Day %1 is invalid for month %2.</source>
        <translation>月份 %2 中没有日期 %1。</translation>
    </message>
    <message>
        <source>Overflow: Can&apos;t represent date %1.</source>
        <translation>溢位：无法&apos;表示日期 %1。</translation>
    </message>
    <message>
        <source>In a simplified stylesheet module, attribute %1 must be present.</source>
        <translation>在简化的样式表单模块中，属性 %1 必须存在。</translation>
    </message>
    <message>
        <source>Unknown XSL-T attribute %1.</source>
        <translation>未知的 XSL-T 属性 %1。</translation>
    </message>
    <message>
        <source>It is not possible to redeclare prefix %1.</source>
        <translation>无法重宣告前置字符串 %1。</translation>
    </message>
    <message>
        <source>exactly one</source>
        <translation>刚好一个</translation>
    </message>
    <message>
        <source>%1 is an invalid regular expression pattern: %2</source>
        <translation>%1 是不合法的正规表示式样式：%2</translation>
    </message>
    <message>
        <source>Element %1 is not allowed at this location.</source>
        <translation>元素 %1 不能在此位置。</translation>
    </message>
    <message>
        <source>The Schema Validation Feature is not supported. Hence, %1-expressions may not be used.</source>
        <translation>未支持机制确认功能。%1 叙述无法使用。</translation>
    </message>
    <message>
        <source>At least one %1 element must appear as child of %2.</source>
        <translation>%2 必须至少有一个子元素 %1。</translation>
    </message>
    <message>
        <source>This processor is not Schema-aware and therefore %1 cannot be used.</source>
        <translation>此处理器不是 Schema-aware，因此不能使用 %1。</translation>
    </message>
    <message>
        <source>Attribute %1 cannot appear on the element %2. Allowed is %3, and the standard attributes.</source>
        <translation>属性 %1 不能出现在元素 %2。只能有 %3 以及标准属性。</translation>
    </message>
    <message>
        <source>Dividing a value of type %1 by %2 (not-a-number) is not allowed.</source>
        <translation>将型态 %1 除以 %2（非数值）是不允许的。</translation>
    </message>
    <message>
        <source>Required cardinality is %1; got cardinality %2.</source>
        <translation>需要的基数为 %1；得到的是 %2。</translation>
    </message>
    <message>
        <source>A construct was encountered which only is allowed in XQuery.</source>
        <translation>遇到了建构，实际上只能允许在 XQuery 内。</translation>
    </message>
    <message>
        <source>No function by name %1 is available.</source>
        <translation>没有名为 %1 的函式。</translation>
    </message>
    <message>
        <source>The URI cannot have a fragment</source>
        <translation>URI 不能有片段</translation>
    </message>
    <message>
        <source>%1 is not an atomic type. Casting is only possible to atomic types.</source>
        <translation>%1 不是一个原型态。只能转换为原型态。</translation>
    </message>
    <message>
        <source>The first argument to %1 cannot be of type %2.</source>
        <translation>呼叫 %1 的第一个参数不能是 %2 型态。</translation>
    </message>
    <message>
        <source>The namespace URI must be a constant and cannot use enclosed expressions.</source>
        <translation>命名空间网址必须是常数，并且不能使用封闭叙述。</translation>
    </message>
    <message>
        <source>Prefix %1 is already declared in the prolog.</source>
        <translation>前置字符串 %1 已在 prolog 中宣告。</translation>
    </message>
    <message>
        <source>Ambiguous rule match.</source>
        <translation>不明确的规则符合。</translation>
    </message>
    <message>
        <source>Promoting %1 to %2 may cause loss of precision.</source>
        <translation>将 %1 抬升为 %2 可能会失去精确度。</translation>
    </message>
    <message>
        <source>In an XSL-T pattern, only function %1 and %2, not %3, can be used for matching.</source>
        <translation>在 XSL-T 样式内，只有函式 %1，%2 可以用于比对。%3 不行。</translation>
    </message>
    <message>
        <source>A default namespace declaration must occur before function, variable, and option declarations.</source>
        <translation>默认的命名空间宣告必须在函式、变量与选项宣告之前。</translation>
    </message>
    <message>
        <source>Operator %1 cannot be used on atomic values of type %2 and %3.</source>
        <translation>操作元 %1 不能用于型态 %2 与 %3 的原数值。</translation>
    </message>
    <message>
        <source>The module import feature is not supported</source>
        <translation>模块汇入功能未支持</translation>
    </message>
    <message>
        <source>The parameter %1 is passed, but no corresponding %2 exists.</source>
        <translation>参数 %1 已传送，但找不到相关的 %2。</translation>
    </message>
    <message>
        <source>A value of type %1 cannot have an Effective Boolean Value.</source>
        <translation>型态 %1 不能有实际布尔值。</translation>
    </message>
    <message>
        <source>The data of a processing instruction cannot contain the string %1</source>
        <translation>处理指令的数据不能包含字符串 %1</translation>
    </message>
    <message>
        <source>Time 24:%1:%2.%3 is invalid. Hour is 24, but minutes, seconds, and milliseconds are not all 0; </source>
        <translation>时间 24:%1:%2.%3 不合法。小时为 24 则分、秒与毫秒都必须是 0; </translation>
    </message>
    <message>
        <source>A template by name %1 has already been declared.</source>
        <translation>名为 %1 的属性已被宣告。</translation>
    </message>
    <message>
        <source>It is not possible to bind to the prefix %1</source>
        <translation>无法与前置字符串 %1 结合</translation>
    </message>
    <message>
        <source>Value %1 of type %2 is below minimum (%3).</source>
        <translation>型态 %2 的数值 %1 已低过最小值（%3）。</translation>
    </message>
    <message>
        <source>Required type is %1, but %2 was found.</source>
        <translation>需要的型态为 %1，但找到 %2。</translation>
    </message>
    <message>
        <source>%1 is an unsupported encoding.</source>
        <translation>%1 是个未被支持的编码。</translation>
    </message>
    <message>
        <source>The name of an option must have a prefix. There is no default namespace for options.</source>
        <translation>选项名称必须有前置字符串。没有选项的默认命名空间。</translation>
    </message>
    <message>
        <source>Element %1 must come last.</source>
        <translation>元素 %1 必须最后出现。</translation>
    </message>
    <message>
        <source>Attribute %1 cannot appear on the element %2. Allowed is %3, %4, and the standard attributes.</source>
        <translation>属性 %1 不能出现在元素 %2。只能有 %3，%4 以及标准属性。</translation>
    </message>
    <message>
        <source>No namespace binding exists for the prefix %1 in %2</source>
        <translation>在 %2 的前置字符串 %1 没有结合命名空间</translation>
    </message>
    <message>
        <source>The name %1 does not refer to any schema type.</source>
        <translation>名称 %1 未指向任何机制型态。</translation>
    </message>
    <message>
        <source>Prefix %1 can only be bound to %2 (and it is, in either case, pre-declared).</source>
        <translation>前置字符串 %1 只能与 %2 结合（也就是说，要预先定义）。</translation>
    </message>
    <message>
        <source>The initialization of variable %1 depends on itself</source>
        <translation>变数 %1 的初始化与自身相依</translation>
    </message>
    <message>
        <source>An attribute node cannot be a child of a document node. Therefore, the attribute %1 is out of place.</source>
        <translation>属性点不能做为文檔点的子节点。因此，属性 %1 的位置不合适。</translation>
    </message>
    <message>
        <source>Month %1 is outside the range %2..%3.</source>
        <translation>月份 %1 已超出 %2 到 %3 的范围。</translation>
    </message>
    <message>
        <source>The name of a variable bound in a for-expression must be different from the positional variable. Hence, the two variables named %1 collide.</source>
        <translation>与 for 叙述结合的变量名称必须与位置变量不同。因此，有两个名为 %1 的变数冲突了。</translation>
    </message>
    <message>
        <source>No namespace binding exists for the prefix %1</source>
        <translation>前置字符串 %1 没有结合命名空间</translation>
    </message>
    <message>
        <source>An %1-attribute with value %2 has already been declared.</source>
        <translation>已宣告属性 %1 的值为 %2。</translation>
    </message>
    <message>
        <source>%1 is not valid as a value of type %2.</source>
        <translation>%1 不是合法的 %2 型态的值。</translation>
    </message>
    <message>
        <source>zero or more</source>
        <translation>0 个以上</translation>
    </message>
    <message>
        <source>%1 is not in the in-scope attribute declarations. Note that the schema import feature is not supported.</source>
        <translation>%1 不是范围内属性宣告。注意机制汇入功能未支持。</translation>
    </message>
    <message>
        <source>When function %1 is used for matching inside a pattern, the argument must be a variable reference or a string literal.</source>
        <translation>当函式 %1 用于样式比对时，参数必须是变量参考或字符串。</translation>
    </message>
    <message>
        <source>%1 is an invalid template mode name.</source>
        <translation>%1 不是合法的样本模式名称。</translation>
    </message>
    <message>
        <source>At least one time component must appear after the %1-delimiter.</source>
        <translation>在分隔符 %1 后必须至少有一个时间组件。</translation>
    </message>
    <message>
        <source>Overflow: Date can&apos;t be represented.</source>
        <translation>溢位：无法&apos;表示日期。</translation>
    </message>
    <message>
        <source>Operator %1 is not available between atomic values of type %2 and %3.</source>
        <translation>操作元 %1 不能用于型态 %2 与 %3 的原数值。</translation>
    </message>
    <message>
        <source>A zone offset must be in the range %1..%2 inclusive. %3 is out of range.</source>
        <translation>区域位移必须是在 %1 到 %2 范围之内。%3 已超出范围。</translation>
    </message>
    <message>
        <source>%1 is not a valid XML 1.0 character.</source>
        <translation>%1 不是合法的 XML 1.0 字符。</translation>
    </message>
    <message>
        <source>The first argument to %1 cannot be of type %2. It must be of type %3, %4, or %5.</source>
        <translation>呼叫 %1 的第一个参数不能是 %2 型态。必须是 %3、%4 或 %5 型态。</translation>
    </message>
    <message>
        <source>%1 is not a whole number of minutes.</source>
        <translation>%1 不是分钟的数值。</translation>
    </message>
    <message>
        <source>Failure when casting from %1 to %2: %3</source>
        <translation>从 %1 转换到 %2 时失败：%3</translation>
    </message>
    <message>
        <source>It is not possible to cast from %1 to %2.</source>
        <translation>不能从 %1 转换到 %2。</translation>
    </message>
    <message>
        <source>No variable by name %1 exists</source>
        <translation>没有名为 %1 的变量存在</translation>
    </message>
    <message>
        <source>Namespace %1 can only be bound to %2 (and it is, in either case, pre-declared).</source>
        <translation>命名空间 %1 只能与 %2 结合（也就是说，要预先定义）。</translation>
    </message>
    <message>
        <source>The second operand in a division, %1, cannot be zero (%2).</source>
        <translation>整数除法的第二个运算对象 %1 不能是零（%2）。</translation>
    </message>
    <message>
        <source>Only one %1 declaration can occur in the query prolog.</source>
        <translation>只有一个 %1 宣告可以在查询中。</translation>
    </message>
    <message>
        <source>Element %1 must have at least one of the attributes %2 or %3.</source>
        <translation>元素 %1 必须至少有属性 %2 或 %3 其中一个。</translation>
    </message>
    <message>
        <source>If both values have zone offsets, they must have the same zone offset. %1 and %2 are not the same.</source>
        <translation>如果两个值都有区域位移，则必须是相同的区域位移。%1 与 %2 并不相同。</translation>
    </message>
    <message>
        <source>No external functions are supported. All supported functions can be used directly, without first declaring them as external</source>
        <translation>未支持外部函式。所有支持的含式可以直接使用而不需要先宣告为外部函式</translation>
    </message>
    <message>
        <source>The last step in a path must contain either nodes or atomic values. It cannot be a mixture between the two.</source>
        <translation>路径的最后一步必须是节点或原值，而不能在两者之间。</translation>
    </message>
</context>
<context>
    <name>QFontDialog</name>
    <message>
        <source>&amp;Font</source>
        <translation>&amp;字型</translation>
    </message>
    <message>
        <source>&amp;Size</source>
        <translation>&amp;大小</translation>
    </message>
    <message>
        <source>Sample</source>
        <translation>范例</translation>
    </message>
    <message>
        <source>Font st&amp;yle</source>
        <translation>字型样&amp;式</translation>
    </message>
    <message>
        <source>Wr&amp;iting System</source>
        <translation>写&amp;入系统</translation>
    </message>
    <message>
        <source>Select Font</source>
        <translation>选择字型</translation>
    </message>
    <message>
        <source>&amp;Underline</source>
        <translation>&amp;底线</translation>
    </message>
    <message>
        <source>Effects</source>
        <translation>效果</translation>
    </message>
    <message>
        <source>Stri&amp;keout</source>
        <translation>删&amp;除线</translation>
    </message>
</context>
<context>
    <name>Q3Wizard</name>
    <message>
        <source>&amp;Help</source>
        <translation>&amp;说明</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation>&amp;取消</translation>
    </message>
    <message>
        <source>&amp;Finish</source>
        <translation>&amp;完成</translation>
    </message>
    <message>
        <source>&amp;Next &gt;</source>
        <translation>&amp;下一个 &gt;＞</translation>
    </message>
    <message>
        <source>&lt; &amp;Back</source>
        <translation>＜&lt; &amp;返回</translation>
    </message>
</context>
<context>
    <name>QWorkspace</name>
    <message>
        <source>&amp;Move</source>
        <translation>&amp;移动</translation>
    </message>
    <message>
        <source>&amp;Size</source>
        <translation>&amp;大小</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Minimize</source>
        <translation>最小化</translation>
    </message>
    <message>
        <source>Stay on &amp;Top</source>
        <translation>留在&amp;顶端</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation>&amp;关闭</translation>
    </message>
    <message>
        <source>%1 - [%2]</source>
        <translation>%1 - [%2]</translation>
    </message>
    <message>
        <source>Sh&amp;ade</source>
        <translation>遮&amp;蔽)</translation>
    </message>
    <message>
        <source>&amp;Restore</source>
        <translation>&amp;回复</translation>
    </message>
    <message>
        <source>&amp;Unshade</source>
        <translation>&amp;取消遮蔽</translation>
    </message>
    <message>
        <source>Mi&amp;nimize</source>
        <translation>最小&amp;化</translation>
    </message>
    <message>
        <source>Ma&amp;ximize</source>
        <translation>最大&amp;化</translation>
    </message>
    <message>
        <source>Restore Down</source>
        <translation>向下恢复</translation>
    </message>
</context>
<context>
    <name>QColorDialog</name>
    <message>
        <source>&amp;Red:</source>
        <translation>&amp;红:</translation>
    </message>
    <message>
        <source>&amp;Sat:</source>
        <translation>&amp;饱和度:</translation>
    </message>
    <message>
        <source>&amp;Val:</source>
        <translation>&amp;亮度:</translation>
    </message>
    <message>
        <source>Hu&amp;e:</source>
        <translation>色&amp;调:</translation>
    </message>
    <message>
        <source>Select Color</source>
        <translation>选择颜色</translation>
    </message>
    <message>
        <source>&amp;Add to Custom Colors</source>
        <translation>&amp;新增到自定义颜色</translation>
    </message>
    <message>
        <source>Bl&amp;ue:</source>
        <translation>蓝&amp;色):</translation>
    </message>
    <message>
        <source>&amp;Green:</source>
        <translation>绿&amp;色):</translation>
    </message>
    <message>
        <source>&amp;Basic colors</source>
        <translation>&amp;基本颜色</translation>
    </message>
    <message>
        <source>&amp;Custom colors</source>
        <translation>&amp;自定义颜色</translation>
    </message>
    <message>
        <source>A&amp;lpha channel:</source>
        <translation>&amp;Alpha 色版:</translation>
    </message>
</context>
<context>
    <name>QSharedMemory</name>
    <message>
        <source>%1: system-imposed size restrictions</source>
        <translation>%1：系统大小限制</translation>
    </message>
    <message>
        <source>%1: unix key file doesn&apos;t exists</source>
        <translation>%1：unix 键值档不&apos;存在</translation>
    </message>
    <message>
        <source>%1: doesn&apos;t exists</source>
        <translation>%1：不&apos;存在</translation>
    </message>
    <message>
        <source>%1: key is empty</source>
        <translation>%1：键值是空的</translation>
    </message>
    <message>
        <source>%1: key error</source>
        <translation>%1：键值错误</translation>
    </message>
    <message>
        <source>%1: create size is less then 0</source>
        <translation>%1：建立大小小于 0</translation>
    </message>
    <message>
        <source>%1: already exists</source>
        <translation>%1：已存在</translation>
    </message>
    <message>
        <source>%1: unknown error %2</source>
        <translation>%1：未知的错误 %2</translation>
    </message>
    <message>
        <source>%1: invalid size</source>
        <translation>%1：不合法的大小</translation>
    </message>
    <message>
        <source>%1: unable to make key</source>
        <translation>%1：无法产生键值</translation>
    </message>
    <message>
        <source>%1: unable to set key on lock</source>
        <translation>%1：无法设置键值</translation>
    </message>
    <message>
        <source>%1: unable to unlock</source>
        <translation>%1：无法解除锁定</translation>
    </message>
    <message>
        <source>%1: permission denied</source>
        <translation>%1：存取被拒</translation>
    </message>
    <message>
        <source>%1: ftok failed</source>
        <translation>%1：ftok 失败</translation>
    </message>
    <message>
        <source>%1: out of resources</source>
        <translation>%1：资源不足</translation>
    </message>
    <message>
        <source>%1: not attached</source>
        <translation>%1：未附加</translation>
    </message>
    <message>
        <source>%1: size query failed</source>
        <translation>%1：大小查询失败</translation>
    </message>
    <message>
        <source>%1: unable to lock</source>
        <translation>%1：无法锁定</translation>
    </message>
</context>
<context>
    <name>QXmlStream</name>
    <message>
        <source>Reference to unparsed entity &apos;%1&apos;.</source>
        <translation>参考到未剖析的实体 &apos;%1&apos;1。</translation>
    </message>
    <message>
        <source>Unexpected character &apos;%1&apos; in public id literal.</source>
        <translation>在公开代码字符中&apos;%1&apos;遇到非预期的字符 %1。</translation>
    </message>
    <message>
        <source>Illegal namespace declaration.</source>
        <translation>不合法的命名空间宣告。</translation>
    </message>
    <message>
        <source>Invalid XML character.</source>
        <translation>不合法的 XML 字符。</translation>
    </message>
    <message>
        <source>Expected character data.</source>
        <translation>预期的字符数据。</translation>
    </message>
    <message>
        <source>Standalone accepts only yes or no.</source>
        <translation>独立实体只接受 yes 或 no。</translation>
    </message>
    <message>
        <source>Invalid XML version string.</source>
        <translation>不合法的 XML 版本字符串。</translation>
    </message>
    <message>
        <source>Invalid processing instruction name.</source>
        <translation>不合法的处理指令名称。</translation>
    </message>
    <message>
        <source>Namespace prefix &apos;%1&apos; not declared</source>
        <translation>命名空间的前置字符串&apos;%1&apos;未宣告</translation>
    </message>
    <message>
        <source>Entity &apos;%1&apos; not declared.</source>
        <translation>实体 %1 &apos;%1&apos;未宣告。</translation>
    </message>
    <message>
        <source>%1 is an invalid processing instruction name.</source>
        <translation>%1 是不合法的处理指令名称。</translation>
    </message>
    <message>
        <source>The standalone pseudo attribute must appear after the encoding.</source>
        <translation>独立的虚拟属性必须在编码之后出现。</translation>
    </message>
    <message>
        <source>Sequence &apos;]]&gt;&apos; not allowed in content.</source>
        <translation>在内文中&apos;]]&gt;&apos;不允许有序列。</translation>
    </message>
    <message>
        <source>%1 is an invalid encoding name.</source>
        <translation>%1 为不合法的编码名称。</translation>
    </message>
    <message>
        <source>, but got &apos;</source>
        <translation>，但是看到的是  &apos;</translation>
    </message>
    <message>
        <source>Start tag expected.</source>
        <translation>预期应有开始标签。</translation>
    </message>
    <message>
        <source>Invalid character reference.</source>
        <translation>不合法的字符参考。</translation>
    </message>
    <message>
        <source>Reference to external entity &apos;%1&apos; in attribute value.</source>
        <translation>在属性值中 &apos;%1&apos;参考到外部实体 %1。</translation>
    </message>
    <message>
        <source>Expected </source>
        <translation>预期应为 </translation>
    </message>
    <message>
        <source>Invalid document.</source>
        <translation>不合法的文檔。</translation>
    </message>
    <message>
        <source>Opening and ending tag mismatch.</source>
        <translation>开启与结束的标签不对称。</translation>
    </message>
    <message>
        <source>Encountered incorrectly encoded content.</source>
        <translation>遇到不正确的编码内容。</translation>
    </message>
    <message>
        <source>Invalid attribute in XML declaration.</source>
        <translation>XML 宣告中有不合法的属性。</translation>
    </message>
    <message>
        <source>Attribute redefined.</source>
        <translation>属性重定义。</translation>
    </message>
    <message>
        <source>%1 is an invalid PUBLIC identifier.</source>
        <translation>%1 为不合法的 PUBLIC 识别子。</translation>
    </message>
    <message>
        <source>Extra content at end of document.</source>
        <translation>文檔尾端有多余的内容。</translation>
    </message>
    <message>
        <source>Invalid XML name.</source>
        <translation>不合法的 XML 名称。</translation>
    </message>
    <message>
        <source>Premature end of document.</source>
        <translation>文檔结尾不正确。</translation>
    </message>
    <message>
        <source>XML declaration not at start of document.</source>
        <translation>XML 宣告没有在文檔开始处。</translation>
    </message>
    <message>
        <source>Recursive entity detected.</source>
        <translation>侦测到递归实体。</translation>
    </message>
    <message>
        <source>Unsupported XML version.</source>
        <translation>未支持的 XML 版本。</translation>
    </message>
    <message>
        <source>Unexpected &apos;</source>
        <translation>非预期 &apos;</translation>
    </message>
    <message>
        <source>Invalid entity value.</source>
        <translation>不合法的实体值。</translation>
    </message>
    <message>
        <source>Encoding %1 is unsupported</source>
        <translation>编码 %1 不支持</translation>
    </message>
    <message>
        <source>NDATA in parameter entity declaration.</source>
        <translation>在参数实体宣告有 NDATA。</translation>
    </message>
</context>
<context>
    <name>QProcess</name>
    <message>
        <source>Error writing to process</source>
        <translation>写入行程时发生错误</translation>
    </message>
    <message>
        <source>Resource error (fork failure): %1</source>
        <translation>资源错误（fork 失败）：%1</translation>
    </message>
    <message>
        <source>Error reading from process</source>
        <translation>从行程读取时发生错误</translation>
    </message>
    <message>
        <source>Process failed to start</source>
        <translation>启动行程失败</translation>
    </message>
    <message>
        <source>Could not open input redirection for reading</source>
        <translation>无法开启输入导向以读取</translation>
    </message>
    <message>
        <source>Could not open output redirection for writing</source>
        <translation>无法开启输出导向以写入</translation>
    </message>
    <message>
        <source>Process operation timed out</source>
        <translation>行程操作逾时</translation>
    </message>
    <message>
        <source>Process crashed</source>
        <translation>行程已崩溃</translation>
    </message>
</context>
<context>
    <name>QNativeSocketEngine</name>
    <message>
        <source>The proxy type is invalid for this operation</source>
        <translation>代理服务器型态无法支持此操作</translation>
    </message>
    <message>
        <source>Network operation timed out</source>
        <translation>网络操作逾时</translation>
    </message>
    <message>
        <source>The remote host closed the connection</source>
        <translation>远程主机关闭了联机</translation>
    </message>
    <message>
        <source>Invalid socket descriptor</source>
        <translation>不合法的 socket 描述子</translation>
    </message>
    <message>
        <source>Host unreachable</source>
        <translation>无法联机到主机</translation>
    </message>
    <message>
        <source>Protocol type not supported</source>
        <translation>协议型态未支持</translation>
    </message>
    <message>
        <source>Datagram was too large to send</source>
        <translation>数据过大无法送出</translation>
    </message>
    <message>
        <source>Attempt to use IPv6 socket on a platform with no IPv6 support</source>
        <translation>试图在没有 IPv6 支持的平台上使用 IPv6 socket</translation>
    </message>
    <message>
        <source>Unable to receive a message</source>
        <translation>无法接收讯息</translation>
    </message>
    <message>
        <source>Permission denied</source>
        <translation>权限不足</translation>
    </message>
    <message>
        <source>Connection refused</source>
        <translation>联机被拒</translation>
    </message>
    <message>
        <source>Unable to write</source>
        <translation>无法写入</translation>
    </message>
    <message>
        <source>Another socket is already listening on the same port</source>
        <translation>另一个 socket 已经在监听同一个端口</translation>
    </message>
    <message>
        <source>Unable to send a message</source>
        <translation>无法送出讯息</translation>
    </message>
    <message>
        <source>The bound address is already in use</source>
        <translation>结合的地址已经在使用中</translation>
    </message>
    <message>
        <source>Connection timed out</source>
        <translation>联机逾时</translation>
    </message>
    <message>
        <source>Network error</source>
        <translation>网络错误</translation>
    </message>
    <message>
        <source>Unsupported socket operation</source>
        <translation>未支持的 socket 操作</translation>
    </message>
    <message>
        <source>Operation on non-socket</source>
        <translation>对非 socket 操作</translation>
    </message>
    <message>
        <source>Unable to initialize broadcast socket</source>
        <translation>无法初始化广播 socket</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
    <message>
        <source>Unable to initialize non-blocking socket</source>
        <translation>无法初始化非阻挡性 socket</translation>
    </message>
    <message>
        <source>The address is protected</source>
        <translation>此地址已被保护</translation>
    </message>
    <message>
        <source>Network unreachable</source>
        <translation>无法使用网络</translation>
    </message>
    <message>
        <source>The address is not available</source>
        <translation>无法取得地址</translation>
    </message>
    <message>
        <source>Out of resources</source>
        <translation>资源不足</translation>
    </message>
</context>
<context>
    <name>QNetworkAccessFtpBackend</name>
    <message>
        <source>No suitable proxy found</source>
        <translation>找不到合适的代理服务器</translation>
    </message>
    <message>
        <source>Error while downloading %1: %2</source>
        <translation>下载 %1 时发生错误：%2</translation>
    </message>
    <message>
        <source>Error while uploading %1: %2</source>
        <translation>上传 %1 时发生错误：%2</translation>
    </message>
    <message>
        <source>Cannot open %1: is a directory</source>
        <translation>无法开启 %1：是一个目录</translation>
    </message>
    <message>
        <source>Logging in to %1 failed: authentication required</source>
        <translation>登入 %1 失败：需要认证</translation>
    </message>
</context>
<context>
    <name>QNetworkAccessHttpBackend</name>
    <message>
        <source>No suitable proxy found</source>
        <translation>找不到合适的代理服务器</translation>
    </message>
</context>
<context>
    <name>QCheckBox</name>
    <message>
        <source>Check</source>
        <translation>勾选</translation>
    </message>
    <message>
        <source>Toggle</source>
        <translation>切换</translation>
    </message>
    <message>
        <source>Uncheck</source>
        <translation>取消勾选</translation>
    </message>
</context>
<context>
    <name>QRadioButton</name>
    <message>
        <source>Check</source>
        <translation>勾选</translation>
    </message>
</context>
<context>
    <name>Q3TitleBar</name>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Minimize</source>
        <translation>最小化</translation>
    </message>
    <message>
        <source>Puts a minimized back to normal</source>
        <translation>将最小化窗口放回原大小</translation>
    </message>
    <message>
        <source>Displays the name of the window and contains controls to manipulate it</source>
        <translation>显示窗口名称，并包含操作它的控制组件</translation>
    </message>
    <message>
        <source>Makes the window full screen</source>
        <translation>将窗口放大到全画面</translation>
    </message>
    <message>
        <source>System</source>
        <translation>系统</translation>
    </message>
    <message>
        <source>Maximize</source>
        <translation>最大化</translation>
    </message>
    <message>
        <source>Contains commands to manipulate the window</source>
        <translation>包含要操作此窗口的指令</translation>
    </message>
    <message>
        <source>Restore up</source>
        <translation>向上恢复</translation>
    </message>
    <message>
        <source>Closes the window</source>
        <translation>关闭窗口</translation>
    </message>
    <message>
        <source>Puts a maximized window back to normal</source>
        <translation>将最大化窗口放回原大小</translation>
    </message>
    <message>
        <source>Moves the window out of the way</source>
        <translation>把窗口移开</translation>
    </message>
    <message>
        <source>Restore down</source>
        <translation>向下恢复</translation>
    </message>
</context>
<context>
    <name>Phonon::</name>
    <message>
        <source>Games</source>
        <translation>游戏</translation>
    </message>
    <message>
        <source>Music</source>
        <translation>音乐</translation>
    </message>
    <message>
        <source>Video</source>
        <translation>影像</translation>
    </message>
    <message>
        <source>Communication</source>
        <translation>通讯</translation>
    </message>
    <message>
        <source>Accessibility</source>
        <translation>辅助装置</translation>
    </message>
    <message>
        <source>Notifications</source>
        <translation>通知</translation>
    </message>
</context>
<context>
    <name>VolumeSlider</name>
    <message>
        <source>Muted</source>
        <translation>静音</translation>
    </message>
    <message>
        <source>Volume: %1%</source>
        <translation>音量：%1%</translation>
    </message>
</context>
<context>
    <name>Q3LocalFs</name>
    <message>
        <source>Could not open
%1</source>
        <translation>无法开启
%1</translation>
    </message>
    <message>
        <source>Could not remove file or directory
%1</source>
        <translation>无法移除目录
%1</translation>
    </message>
    <message>
        <source>Could not create directory
%1</source>
        <translation>无法建立目录
%1</translation>
    </message>
    <message>
        <source>Could not read directory
%1</source>
        <translation>无法读取目录
%1</translation>
    </message>
    <message>
        <source>Could not rename
%1
to
%2</source>
        <translation>无法将
%1
重新命名为
%2</translation>
    </message>
    <message>
        <source>Could not write
%1</source>
        <translation>无法写入
%1</translation>
    </message>
</context>
<context>
    <name>QDial</name>
    <message>
        <source>QDial</source>
        <translation>QDial</translation>
    </message>
    <message>
        <source>SliderHandle</source>
        <translation>SliderHandle</translation>
    </message>
    <message>
        <source>SpeedoMeter</source>
        <translation>SpeedoMeter</translation>
    </message>
</context>
<context>
    <name>QSocks5SocketEngine</name>
    <message>
        <source>Network operation timed out</source>
        <translation>网络操作逾时</translation>
    </message>
    <message>
        <source>Connection to proxy closed prematurely</source>
        <translation>代理服务器联机已不正常关闭</translation>
    </message>
    <message>
        <source>Proxy authentication failed: %1</source>
        <translation>代理服务器认证失败：%1</translation>
    </message>
    <message>
        <source>Proxy authentication failed</source>
        <translation>代理服务器认证失败</translation>
    </message>
    <message>
        <source>General SOCKSv5 server failure</source>
        <translation>一般的 SOCKSv5 服务器错误</translation>
    </message>
    <message>
        <source>Unknown SOCKSv5 proxy error code 0x%1</source>
        <translation>未知的 SOCKSv5 代理服务器错误代码 0x%1</translation>
    </message>
    <message>
        <source>Connection not allowed by SOCKSv5 server</source>
        <translation>联机未被 SOCKSv5 服务器允许</translation>
    </message>
    <message>
        <source>SOCKSv5 command not supported</source>
        <translation>SOCKSv5 指令未被支持</translation>
    </message>
    <message>
        <source>Connection to proxy timed out</source>
        <translation>代理服务器联机逾时</translation>
    </message>
    <message>
        <source>Proxy host not found</source>
        <translation>找不到代理服务器</translation>
    </message>
    <message>
        <source>TTL expired</source>
        <translation>TTL 逾时</translation>
    </message>
    <message>
        <source>Address type not supported</source>
        <translation>地址型态未被支持</translation>
    </message>
    <message>
        <source>Connection to proxy refused</source>
        <translation>代理服务器联机被拒</translation>
    </message>
    <message>
        <source>SOCKS version 5 protocol error</source>
        <translation>SOCKS 5 的协议错误</translation>
    </message>
</context>
<context>
    <name>QWhatsThisAction</name>
    <message>
        <source>What&apos;s This?</source>
        <translation>这是&apos;什么?</translation>
    </message>
</context>
<context>
    <name>Q3UrlOperator</name>
    <message>
        <source>The protocol `%1&apos; does not support getting files</source>
        <translation>协定 %1&apos; 未支持取得文件</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support renaming files or directories</source>
        <translation>协定 %1&apos; 未支持重新命名文件或目录</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support listing directories</source>
        <translation>协定 %1&apos; 未支持列出目录</translation>
    </message>
    <message>
        <source>(unknown)</source>
        <translation>（未知）</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support removing files or directories</source>
        <translation>协定 %1&apos; 未支持移除文件或目录</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support putting files</source>
        <translation>协定 %1&apos; 未支持写入文件</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; is not supported</source>
        <translation>协议 %1 未支持</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support copying or moving files or directories</source>
        <translation>协议 %1 未支持复制或移动文件或目录</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support creating new directories</source>
        <translation>协议 %1 未支持建立新目录</translation>
    </message>
</context>
<context>
    <name>QFtp</name>
    <message>
        <source>Listing directory failed:
%1</source>
        <translation>列出目录时失败：
%1</translation>
    </message>
    <message>
        <source>Creating directory failed:
%1</source>
        <translation>建立目录时失败：
%1</translation>
    </message>
    <message>
        <source>Not connected</source>
        <translation>未联机</translation>
    </message>
    <message>
        <source>Connection refused for data connection</source>
        <translation>数据联机被拒</translation>
    </message>
    <message>
        <source>Login failed:
%1</source>
        <translation>登入失败：
%1</translation>
    </message>
    <message>
        <source>Downloading file failed:
%1</source>
        <translation>下载文件时失败：
%1</translation>
    </message>
    <message>
        <source>Connected to host</source>
        <translation>已联机到主机</translation>
    </message>
    <message>
        <source>Connection timed out to host %1</source>
        <translation>联机到主机 %1 逾时</translation>
    </message>
    <message>
        <source>Connected to host %1</source>
        <translation>已连接到主机 %1</translation>
    </message>
    <message>
        <source>Connecting to host failed:
%1</source>
        <translation>联机到主机失败：
%1</translation>
    </message>
    <message>
        <source>Host %1 not found</source>
        <translation>找不到主机 %1</translation>
    </message>
    <message>
        <source>Uploading file failed:
%1</source>
        <translation>上传文件时失败：
%1</translation>
    </message>
    <message>
        <source>Changing directory failed:
%1</source>
        <translation>变更目录时失败：
%1</translation>
    </message>
    <message>
        <source>Host found</source>
        <translation>找到主机</translation>
    </message>
    <message>
        <source>Removing directory failed:
%1</source>
        <translation>移除目录时失败：
%1</translation>
    </message>
    <message>
        <source>Connection refused to host %1</source>
        <translation>联机到主机 %1 被拒</translation>
    </message>
    <message>
        <source>Connection to %1 closed</source>
        <translation>到 %1 的联机已关闭</translation>
    </message>
    <message>
        <source>Removing file failed:
%1</source>
        <translation>移除文件时失败：
%1</translation>
    </message>
    <message>
        <source>Host %1 found</source>
        <translation>找到主机 %1</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
    <message>
        <source>Connection closed</source>
        <translation>联机已关闭</translation>
    </message>
</context>
<context>
    <name>QDB2Driver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>无法提交事务</translation>
    </message>
    <message>
        <source>Unable to set autocommit</source>
        <translation>无法设置自动提交</translation>
    </message>
    <message>
        <source>Unable to connect</source>
        <translation>无法连接</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>无法反转事务</translation>
    </message>
</context>
<context>
    <name>QIBaseDriver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>无法提交事务</translation>
    </message>
    <message>
        <source>Could not start transaction</source>
        <translation>无法开始事务</translation>
    </message>
    <message>
        <source>Error opening database</source>
        <translation>开启数据库发生错误</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>无法反转事务</translation>
    </message>
</context>
<context>
    <name>QIBaseResult</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>无法提交事务</translation>
    </message>
    <message>
        <source>Unable to open BLOB</source>
        <translation>无法开启 BLOB</translation>
    </message>
    <message>
        <source>Could not describe statement</source>
        <translation>无法描述叙述</translation>
    </message>
    <message>
        <source>Could not describe input statement</source>
        <translation>无法描述输入叙述</translation>
    </message>
    <message>
        <source>Could not allocate statement</source>
        <translation>无法配置叙述</translation>
    </message>
    <message>
        <source>Unable to write BLOB</source>
        <translation>无法写入 BLOB</translation>
    </message>
    <message>
        <source>Could not start transaction</source>
        <translation>无法开始事务</translation>
    </message>
    <message>
        <source>Unable to close statement</source>
        <translation>无法关闭叙述</translation>
    </message>
    <message>
        <source>Could not get query info</source>
        <translation>无法取得查询信息</translation>
    </message>
    <message>
        <source>Could not find array</source>
        <translation>找不到数组</translation>
    </message>
    <message>
        <source>Could not get array data</source>
        <translation>无法取得数组数据</translation>
    </message>
    <message>
        <source>Unable to execute query</source>
        <translation>无法执行查询</translation>
    </message>
    <message>
        <source>Could not prepare statement</source>
        <translation>无法准备叙述</translation>
    </message>
    <message>
        <source>Could not fetch next item</source>
        <translation>无法抓取下一个项目</translation>
    </message>
    <message>
        <source>Could not get statement info</source>
        <translation>无法取得叙述信息</translation>
    </message>
    <message>
        <source>Unable to create BLOB</source>
        <translation>无法建立 BLOB</translation>
    </message>
    <message>
        <source>Unable to read BLOB</source>
        <translation>无法读取 BLOB</translation>
    </message>
</context>
<context>
    <name>QMYSQLDriver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>无法提交事务</translation>
    </message>
    <message>
        <source>Unable to open database &apos;</source>
        <translation>无法开启数据库&apos;</translation>
    </message>
    <message>
        <source>Unable to connect</source>
        <translation>无法联机</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>无法反转事务</translation>
    </message>
    <message>
        <source>Unable to begin transaction</source>
        <translation>无法开始事务</translation>
    </message>
</context>
<context>
    <name>QOCIDriver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>无法提交事务</translation>
    </message>
    <message>
        <source>Unable to initialize</source>
        <translation>无法初始化</translation>
    </message>
    <message>
        <source>Unable to logon</source>
        <translation>无法登入</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>无法反转事务</translation>
    </message>
    <message>
        <source>Unable to begin transaction</source>
        <translation>无法开始事务</translation>
    </message>
</context>
<context>
    <name>QODBCDriver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>无法提交事务</translation>
    </message>
    <message>
        <source>Unable to enable autocommit</source>
        <translation>无法开启自动提交功能</translation>
    </message>
    <message>
        <source>Unable to connect - Driver doesn&apos;t support all needed functionality</source>
        <translation>无法连接─驱动程序无法&apos;支持所有需要的功能</translation>
    </message>
    <message>
        <source>Unable to disable autocommit</source>
        <translation>无法关闭自动提交功能</translation>
    </message>
    <message>
        <source>Unable to connect</source>
        <translation>无法连接</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>无法反转事务</translation>
    </message>
</context>
<context>
    <name>QSQLite2Driver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>无法提交事务</translation>
    </message>
    <message>
        <source>Error to open database</source>
        <translation>开启数据库时发生错误</translation>
    </message>
    <message>
        <source>Unable to rollback Transaction</source>
        <translation>无法反转事务</translation>
    </message>
    <message>
        <source>Unable to begin transaction</source>
        <translation>无法开始事务</translation>
    </message>
</context>
<context>
    <name>QSQLiteDriver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>无法提交事务</translation>
    </message>
    <message>
        <source>Error closing database</source>
        <translation>关闭数据库发生错误</translation>
    </message>
    <message>
        <source>Error opening database</source>
        <translation>开启数据库发生错误</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>无法反转事务</translation>
    </message>
    <message>
        <source>Unable to begin transaction</source>
        <translation>无法开始事务</translation>
    </message>
</context>
<context>
    <name>QAbstractSocket</name>
    <message>
        <source>Host not found</source>
        <translation>找不到主机</translation>
    </message>
    <message>
        <source>Connection refused</source>
        <translation>联机被拒</translation>
    </message>
    <message>
        <source>Connection timed out</source>
        <translation>联机逾时</translation>
    </message>
    <message>
        <source>Socket is not connected</source>
        <translation>Socket 未联机</translation>
    </message>
    <message>
        <source>Socket operation timed out</source>
        <translation>Socket 操作逾时</translation>
    </message>
    <message>
        <source>Network unreachable</source>
        <translation>无法使用网络</translation>
    </message>
    <message>
        <source>Operation on socket is not supported</source>
        <translation>Socket 的操作未被支持</translation>
    </message>
</context>
<context>
    <name>QHostInfoAgent</name>
    <message>
        <source>Host not found</source>
        <translation>找不到主机</translation>
    </message>
    <message>
        <source>Unknown address type</source>
        <translation>未知的地址型态</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
</context>
<context>
    <name>Phonon::Gstreamer::MediaObject</name>
    <message>
        <source>Could not open media source.</source>
        <translation>无法开启媒体来源。</translation>
    </message>
    <message>
        <source>Could not decode media source.</source>
        <translation>无法译码媒体来源。</translation>
    </message>
    <message>
        <source>Invalid source type.</source>
        <translation>不合法的来源型态。</translation>
    </message>
    <message>
        <source>Cannot start playback.

Check your Gstreamer installation and make sure you
have libgstreamer-plugins-base installed.</source>
        <translation>无法开始播放。

请检查您的 Gstreamer 安装，并确定您有安装
libgstreamer-plugins-base 套件。</translation>
    </message>
    <message>
        <source>Could not open audio device. The device is already in use.</source>
        <translation>无法开启音效装置。装置已在使用中。</translation>
    </message>
    <message>
        <source>A required codec is missing. You need to install the following codec(s) to play this content: %0</source>
        <translation>找不到需要的编译码器。您需要安装以下的套件来播放此内容：%0</translation>
    </message>
    <message>
        <source>Could not locate media source.</source>
        <translation>无法定位媒体来源。</translation>
    </message>
</context>
<context>
    <name>QLibrary</name>
    <message>
        <source>Could not unmap &apos;%1&apos;: %2</source>
        <translation>无法 unmap &apos;%1&apos;：%2</translation>
    </message>
    <message>
        <source>Cannot unload library %1: %2</source>
        <translation>无法卸除函式库 %1：%2</translation>
    </message>
    <message>
        <source>Cannot load library %1: %2</source>
        <translation>无法加载函式库 %1：%2</translation>
    </message>
    <message>
        <source>The plugin &apos;%1&apos; uses incompatible Qt library. (%2.%3.%4) [%5]</source>
        <translation>插件 &apos;%1&apos; 使用不兼容的 Qt 函式库（%2.%3.%4）【%5】</translation>
    </message>
    <message>
        <source>Cannot resolve symbol &quot;%1&quot; in %2: %3</source>
        <translation>无法反解 %2 内的符号 &quot;%1&quot;：%3</translation>
    </message>
    <message>
        <source>Plugin verification data mismatch in &apos;%1&apos;</source>
        <translation>在 &apos;%1&apos; 中的插件确认数据不符合</translation>
    </message>
    <message>
        <source>The plugin &apos;%1&apos; uses incompatible Qt library. (Cannot mix debug and release libraries.)</source>
        <translation>插件 &apos;%1&apos; 使用不兼容的 Qt 函式库。（不能将调试与释出版的函式库混在一起。）</translation>
    </message>
    <message>
        <source>The file &apos;%1&apos; is not a valid Qt plugin.</source>
        <translation>文件 &apos;%1&apos; 不是合法的 Qt 插件。</translation>
    </message>
    <message>
        <source>The shared library was not found.</source>
        <translation>找不到分享函式库。</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
    <message>
        <source>The plugin &apos;%1&apos; uses incompatible Qt library. Expected build key &quot;%2&quot;, got &quot;%3&quot;</source>
        <translation>插件 &apos;%1&apos; 使用不兼容的 Qt 函式库。预期建构钥 &quot;%2&quot;，却得到 &quot;%3&quot;</translation>
    </message>
    <message>
        <source>Could not mmap &apos;%1&apos;: %2</source>
        <translation>无法 mmap &apos;%1&apos;：%2</translation>
    </message>
</context>
<context>
    <name>QHttp</name>
    <message>
        <source>Connection refused (or timed out)</source>
        <translation>联机被拒（或联机逾时）</translation>
    </message>
    <message>
        <source>Data corrupted</source>
        <translation>资料已损毁</translation>
    </message>
    <message>
        <source>Connected to host</source>
        <translation>已联机到主机</translation>
    </message>
    <message>
        <source>Connected to host %1</source>
        <translation>已连接到主机 %1</translation>
    </message>
    <message>
        <source>Host %1 not found</source>
        <translation>找不到主机 %1</translation>
    </message>
    <message>
        <source>Host requires authentication</source>
        <translation>主机需要认证</translation>
    </message>
    <message>
        <source>Error writing response to device</source>
        <translation>写入响应到装置时发生错误</translation>
    </message>
    <message>
        <source>HTTPS connection requested but SSL support not compiled in</source>
        <translation>HTTPS 联机需要的 SSL 支持并未编译进来</translation>
    </message>
    <message>
        <source>Host found</source>
        <translation>找到主机</translation>
    </message>
    <message>
        <source>Connection refused</source>
        <translation>联机被拒</translation>
    </message>
    <message>
        <source>Proxy authentication required</source>
        <translation>代理服务器需要认证</translation>
    </message>
    <message>
        <source>Unknown protocol specified</source>
        <translation>指定了未知的协定</translation>
    </message>
    <message>
        <source>HTTP request failed</source>
        <translation>HTTP 要求失败</translation>
    </message>
    <message>
        <source>Proxy requires authentication</source>
        <translation>代理服务器需要认证</translation>
    </message>
    <message>
        <source>Authentication required</source>
        <translation>需要认证</translation>
    </message>
    <message>
        <source>SSL handshake failed</source>
        <translation>SSL 沟通失败</translation>
    </message>
    <message>
        <source>Connection to %1 closed</source>
        <translation>到 %1 的联机已关闭</translation>
    </message>
    <message>
        <source>Invalid HTTP chunked body</source>
        <translation>不合法的 HTTP 区块主体</translation>
    </message>
    <message>
        <source>Host %1 found</source>
        <translation>找到主机 %1</translation>
    </message>
    <message>
        <source>Wrong content length</source>
        <translation>错误的内容长度</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
    <message>
        <source>Invalid HTTP response header</source>
        <translation>不合法的 HTTP 回复标头</translation>
    </message>
    <message>
        <source>Connection closed</source>
        <translation>联机已关闭</translation>
    </message>
    <message>
        <source>No server set to connect to</source>
        <translation>没有设置要联机到哪个服务器</translation>
    </message>
    <message>
        <source>Server closed connection unexpectedly</source>
        <translation>服务器无预警关闭联机</translation>
    </message>
    <message>
        <source>Request aborted</source>
        <translation>要求中止</translation>
    </message>
</context>
<context>
    <name>QXml</name>
    <message>
        <source>unparsed entity reference in wrong context</source>
        <translation>在错误的内文中有未剖析的实体参考</translation>
    </message>
    <message>
        <source>external parsed general entity reference not allowed in DTD</source>
        <translation>在 DTD 中不允许使用外部剖析的实体参考</translation>
    </message>
    <message>
        <source>wrong value for standalone declaration</source>
        <translation>独立宣告时的值错误</translation>
    </message>
    <message>
        <source>encoding declaration or standalone declaration expected while reading the XML declaration</source>
        <translation>读取 XML 宣告时应有编码宣告或独立宣告</translation>
    </message>
    <message>
        <source>no error occurred</source>
        <translation>没有发生错误</translation>
    </message>
    <message>
        <source>error occurred while parsing reference</source>
        <translation>剖析参考时发生错误</translation>
    </message>
    <message>
        <source>standalone declaration expected while reading the XML declaration</source>
        <translation>读取 XML 宣告时应有读立宣告</translation>
    </message>
    <message>
        <source>invalid name for processing instruction</source>
        <translation>处理指令时的不合法名称</translation>
    </message>
    <message>
        <source>error triggered by consumer</source>
        <translation>用户触发的错误</translation>
    </message>
    <message>
        <source>error occurred while parsing element</source>
        <translation>剖析元素时发生错误</translation>
    </message>
    <message>
        <source>unexpected character</source>
        <translation>非预期的字符</translation>
    </message>
    <message>
        <source>tag mismatch</source>
        <translation>标签不对称</translation>
    </message>
    <message>
        <source>error occurred while parsing content</source>
        <translation>剖析内容时发生错误</translation>
    </message>
    <message>
        <source>error occurred while parsing comment</source>
        <translation>剖析批注时发生错误</translation>
    </message>
    <message>
        <source>internal general entity reference not allowed in DTD</source>
        <translation>在 DTD 中不允许内部产生的实体参考</translation>
    </message>
    <message>
        <source>recursive entities</source>
        <translation>递归的实体</translation>
    </message>
    <message>
        <source>more than one document type definition</source>
        <translation>定义了一个以上的文文件型态</translation>
    </message>
    <message>
        <source>version expected while reading the XML declaration</source>
        <translation>读取 XML 宣告时应有版本号</translation>
    </message>
    <message>
        <source>letter is expected</source>
        <translation>预期应为字母</translation>
    </message>
    <message>
        <source>unexpected end of file</source>
        <translation>未预期遇到文件结尾</translation>
    </message>
    <message>
        <source>external parsed general entity reference not allowed in attribute value</source>
        <translation>在属性值中不允许使用外部剖析的实体参考</translation>
    </message>
    <message>
        <source>error in the text declaration of an external entity</source>
        <translation>在外部实体中的文本宣告有错误</translation>
    </message>
    <message>
        <source>error occurred while parsing document type definition</source>
        <translation>剖析文文件型态定义时发生错误</translation>
    </message>
</context>
<context>
    <name>QSystemSemaphore</name>
    <message>
        <source>%1: does not exist</source>
        <translation>%1：不存在</translation>
    </message>
    <message>
        <source>%1: already exists</source>
        <translation>%1：已存在</translation>
    </message>
    <message>
        <source>%1: unknown error %2</source>
        <translation>%1：未知的错误 %2</translation>
    </message>
    <message>
        <source>%1: permission denied</source>
        <translation>%1：存取被拒</translation>
    </message>
    <message>
        <source>%1: out of resources</source>
        <translation>%1：资源不足</translation>
    </message>
</context>
<context>
    <name>QSQLiteResult</name>
    <message>
        <source>Unable to fetch row</source>
        <translation>无法抓取列</translation>
    </message>
    <message>
        <source>No query</source>
        <translation>没有查询</translation>
    </message>
    <message>
        <source>Unable to execute statement</source>
        <translation>无法执行叙述</translation>
    </message>
    <message>
        <source>Unable to bind parameters</source>
        <translation>无法结合参数</translation>
    </message>
    <message>
        <source>Unable to reset statement</source>
        <translation>无法重置叙述</translation>
    </message>
    <message>
        <source>Parameter count mismatch</source>
        <translation>参数数量不符合</translation>
    </message>
</context>
<context>
    <name>QApplication</name>
    <message>
        <source>Activates the program&apos;s main window</source>
        <translation>启动程序的主窗口</translation>
    </message>
    <message>
        <source>QT_LAYOUT_DIRECTION</source>
        <translation>LTR</translation>
    </message>
    <message>
        <source>Activate</source>
        <translation>启动</translation>
    </message>
    <message>
        <source>Executable &apos;%1&apos; requires Qt %2, found Qt %3.</source>
        <translation>执行档 &apos;%1&apos; 需要 Qt %2，但只找到 Qt %3。</translation>
    </message>
    <message>
        <source>Incompatible Qt Library Error</source>
        <translation>Qt 函式库不相容的错误</translation>
    </message>
</context>
<context>
    <name>QUnicodeControlCharacterMenu</name>
    <message>
        <source>RLE Start of right-to-left embedding</source>
        <translation>RLE 右到左嵌入起点</translation>
    </message>
    <message>
        <source>ZWSP Zero width space</source>
        <translation>ZWSP 零宽度空白</translation>
    </message>
    <message>
        <source>Insert Unicode control character</source>
        <translation>插入万国码控制字符</translation>
    </message>
    <message>
        <source>LRO Start of left-to-right override</source>
        <translation>LRO 左到右覆写起点</translation>
    </message>
    <message>
        <source>LRE Start of left-to-right embedding</source>
        <translation>LRE 左到右嵌入起点</translation>
    </message>
    <message>
        <source>RLM Right-to-left mark</source>
        <translation>RLM 右到左标记</translation>
    </message>
    <message>
        <source>PDF Pop directional formatting</source>
        <translation>PDF 弹出方向格式</translation>
    </message>
    <message>
        <source>ZWNJ Zero width non-joiner</source>
        <translation>ZWNJ 零宽度非连接器</translation>
    </message>
    <message>
        <source>RLO Start of right-to-left override</source>
        <translation>RLO 右到左覆写起点</translation>
    </message>
    <message>
        <source>ZWJ Zero width joiner</source>
        <translation>ZWJ 零宽度连接器</translation>
    </message>
    <message>
        <source>LRM Left-to-right mark</source>
        <translation>LRM 左到右标记</translation>
    </message>
</context>
<context>
    <name>QWebFrame</name>
    <message>
        <source>Request blocked</source>
        <translation>请求已被阻挡</translation>
    </message>
    <message>
        <source>Request cancelled</source>
        <translation>请求已取消</translation>
    </message>
    <message>
        <source>Cannot show URL</source>
        <translation>无法显示网址</translation>
    </message>
    <message>
        <source>Frame load interruped by policy change</source>
        <translation>影像加载因政策变更而中断</translation>
    </message>
    <message>
        <source>File does not exist</source>
        <translation>文件不存在</translation>
    </message>
    <message>
        <source>Cannot show mimetype</source>
        <translation>无法显示 MIME 型态</translation>
    </message>
</context>
<context>
    <name>QRegExp</name>
    <message>
        <source>bad lookahead syntax</source>
        <translation>错误的 lookahead 语法</translation>
    </message>
    <message>
        <source>no error occurred</source>
        <translation>没有发生错误</translation>
    </message>
    <message>
        <source>missing left delim</source>
        <translation>少了左方的区隔符</translation>
    </message>
    <message>
        <source>bad char class syntax</source>
        <translation>错误的字符类别语法</translation>
    </message>
    <message>
        <source>disabled feature used</source>
        <translation>使用已关闭的功能</translation>
    </message>
    <message>
        <source>invalid octal value</source>
        <translation>不合法的八进制值</translation>
    </message>
    <message>
        <source>bad repetition syntax</source>
        <translation>错误的重复语法</translation>
    </message>
    <message>
        <source>met internal limit</source>
        <translation>遇到内部限制</translation>
    </message>
    <message>
        <source>unexpected end</source>
        <translation>未预期遇到结尾</translation>
    </message>
</context>
<context>
    <name>QHttpSocketEngine</name>
    <message>
        <source>Proxy connection refused</source>
        <translation>代理服务器联机被拒</translation>
    </message>
    <message>
        <source>Proxy denied connection</source>
        <translation>代理服务器拒绝联机</translation>
    </message>
    <message>
        <source>Proxy server not found</source>
        <translation>找不到代理服务器</translation>
    </message>
    <message>
        <source>Proxy server connection timed out</source>
        <translation>代理服务器联机逾时</translation>
    </message>
    <message>
        <source>Did not receive HTTP response from proxy</source>
        <translation>未从代理服务器接收到 HTTP 响应</translation>
    </message>
    <message>
        <source>Proxy connection closed prematurely</source>
        <translation>代理服务器联机已不正常关闭</translation>
    </message>
    <message>
        <source>Error communicating with HTTP proxy</source>
        <translation>与 HTTP 代理服务器联系时发生错误</translation>
    </message>
    <message>
        <source>Authentication required</source>
        <translation>需要认证</translation>
    </message>
    <message>
        <source>Error parsing authentication request from proxy</source>
        <translation>剖析从代理服务器传来的认证要求时发生错误</translation>
    </message>
</context>
<context>
    <name>QOCIResult</name>
    <message>
        <source>Unable to alloc statement</source>
        <translation>无法配置叙述</translation>
    </message>
    <message>
        <source>Unable to goto next</source>
        <translation>无法跳到下一个</translation>
    </message>
    <message>
        <source>Unable to execute statement</source>
        <translation>无法执行叙述</translation>
    </message>
    <message>
        <source>Unable to bind column for batch execute</source>
        <translation>无法结合字段以做批执行</translation>
    </message>
    <message>
        <source>Unable to execute select statement</source>
        <translation>无法执行选取的叙述</translation>
    </message>
    <message>
        <source>Unable to prepare statement</source>
        <translation>无法准备叙述</translation>
    </message>
    <message>
        <source>Unable to execute batch statement</source>
        <translation>无法执行批叙述</translation>
    </message>
    <message>
        <source>Unable to bind value</source>
        <translation>无法结合数值</translation>
    </message>
</context>
<context>
    <name>QNetworkReply</name>
    <message>
        <source>Error downloading %1 - server replied: %2</source>
        <translation>下载 %1 时发生错误─服务器回应：%2</translation>
    </message>
    <message>
        <source>Protocol &quot;%1&quot; is unknown</source>
        <translation>未知的协定 &quot;%1&quot;</translation>
    </message>
</context>
<context>
    <name>QAbstractSpinBox</name>
    <message>
        <source>Step &amp;down</source>
        <translation>单步向&amp;下</translation>
    </message>
    <message>
        <source>&amp;Step up</source>
        <translation>&amp;单步向上</translation>
    </message>
    <message>
        <source>&amp;Select All</source>
        <translation>&amp;全部选择</translation>
    </message>
</context>
<context>
    <name>QDB2Result</name>
    <message>
        <source>Unable to bind variable</source>
        <translation>无法结合变量</translation>
    </message>
    <message>
        <source>Unable to execute statement</source>
        <translation>无法执行叙述</translation>
    </message>
    <message>
        <source>Unable to fetch next</source>
        <translation>无法抓取下一笔</translation>
    </message>
    <message>
        <source>Unable to prepare statement</source>
        <translation>无法准备叙述</translation>
    </message>
    <message>
        <source>Unable to fetch record %1</source>
        <translation>无法抓取纪录 %1</translation>
    </message>
    <message>
        <source>Unable to fetch first</source>
        <translation>无法抓取第一笔</translation>
    </message>
</context>
<context>
    <name>QODBCResult</name>
    <message>
        <source>Unable to bind variable</source>
        <translation>无法结合变量</translation>
    </message>
    <message>
        <source>Unable to execute statement</source>
        <translation>无法执行叙述</translation>
    </message>
    <message>
        <source>Unable to fetch next</source>
        <translation>无法抓取下一笔</translation>
    </message>
    <message>
        <source>Unable to fetch last</source>
        <translation>无法抓取最后一笔</translation>
    </message>
    <message>
        <source>Unable to prepare statement</source>
        <translation>无法准备叙述</translation>
    </message>
    <message>
        <source>Unable to fetch previous</source>
        <translation>无法抓取前一笔</translation>
    </message>
    <message>
        <source>Unable to fetch</source>
        <translation>无法抓取</translation>
    </message>
    <message>
        <source>QODBCResult::reset: Unable to set &apos;SQL_CURSOR_STATIC&apos; as statement attribute. Please check your ODBC driver configuration</source>
        <translation>QODBCResult::reset: 无法设置  &apos;SQL_CURSOR_STATIC&apos; 做为叙述属性。请检查您的 ODBC 驱动程序的设置</translation>
    </message>
    <message>
        <source>Unable to fetch first</source>
        <translation>无法抓取第一笔</translation>
    </message>
</context>
<context>
    <name>QPSQLDriver</name>
    <message>
        <source>Unable to subscribe</source>
        <translation>无法订阅</translation>
    </message>
    <message>
        <source>Could not begin transaction</source>
        <translation>无法开始事务</translation>
    </message>
    <message>
        <source>Could not rollback transaction</source>
        <translation>无法反转事务</translation>
    </message>
    <message>
        <source>Could not commit transaction</source>
        <translation>无法提交事务</translation>
    </message>
    <message>
        <source>Unable to connect</source>
        <translation>无法联机</translation>
    </message>
    <message>
        <source>Unable to unsubscribe</source>
        <translation>无法取消订阅</translation>
    </message>
</context>
<context>
    <name>QInputDialog</name>
    <message>
        <source>Enter a value:</source>
        <translation>请输入值:</translation>
    </message>
</context>
<context>
    <name>QCoreApplication</name>
    <message>
        <source>%1: key is empty</source>
        <translation>%1：键值是空的</translation>
    </message>
    <message>
        <source>%1: unable to make key</source>
        <translation>%1：无法产生键值</translation>
    </message>
    <message>
        <source>%1: ftok failed</source>
        <translation>%1：ftok 失败</translation>
    </message>
</context>
<context>
    <name>QIODevice</name>
    <message>
        <source>No such file or directory</source>
        <translation>找不到该文件或目录</translation>
    </message>
    <message>
        <source>Permission denied</source>
        <translation>权限不足</translation>
    </message>
    <message>
        <source>No space left on device</source>
        <translation>装置上已无空间</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
    <message>
        <source>Too many open files</source>
        <translation>开启过多文件</translation>
    </message>
</context>
<context>
    <name>QMultiInputContext</name>
    <message>
        <source>Select IM</source>
        <translation>选择输入法</translation>
    </message>
</context>
<context>
    <name>QTabBar</name>
    <message>
        <source>Scroll Left</source>
        <translation>往左滚动条</translation>
    </message>
    <message>
        <source>Scroll Right</source>
        <translation>往右滚动条</translation>
    </message>
</context>
<context>
    <name>QUndoModel</name>
    <message>
        <source>&lt;empty&gt;</source>
        <translation>&lt;空白&gt;</translation>
    </message>
</context>
<context>
    <name>QNetworkAccessCacheBackend</name>
    <message>
        <source>Error opening %1</source>
        <translation>开启 %1 发生错误</translation>
    </message>
</context>
<context>
    <name>QMYSQLResult</name>
    <message>
        <source>Unable to execute statement</source>
        <translation>无法执行叙述</translation>
    </message>
    <message>
        <source>Unable to store statement results</source>
        <translation>无法保存叙述结果</translation>
    </message>
    <message>
        <source>Unable to execute next query</source>
        <translation>无法执行下一个查询</translation>
    </message>
    <message>
        <source>Unable to bind outvalues</source>
        <translation>无法结合输出值</translation>
    </message>
    <message>
        <source>Unable to store next result</source>
        <translation>无法保存下一个结果</translation>
    </message>
    <message>
        <source>Unable to fetch data</source>
        <translation>无法抓取数据</translation>
    </message>
    <message>
        <source>Unable to prepare statement</source>
        <translation>无法准备叙述</translation>
    </message>
    <message>
        <source>Unable to store result</source>
        <translation>无法保存结果</translation>
    </message>
    <message>
        <source>Unable to bind value</source>
        <translation>无法结合数值</translation>
    </message>
    <message>
        <source>Unable to execute query</source>
        <translation>无法执行查询</translation>
    </message>
    <message>
        <source>Unable to reset statement</source>
        <translation>无法重置叙述</translation>
    </message>
</context>
<context>
    <name>QSQLite2Result</name>
    <message>
        <source>Unable to execute statement</source>
        <translation>无法执行叙述</translation>
    </message>
    <message>
        <source>Unable to fetch results</source>
        <translation>无法抓取结果</translation>
    </message>
</context>
<context>
    <name>Q3MainWindow</name>
    <message>
        <source>Line up</source>
        <translation>排列</translation>
    </message>
    <message>
        <source>Customize...</source>
        <translation>自定义...</translation>
    </message>
</context>
<context>
    <name>QUdpSocket</name>
    <message>
        <source>This platform does not support IPv6</source>
        <translation>此平台不支援 IPv6</translation>
    </message>
</context>
<context>
    <name>Phonon::Gstreamer::Backend</name>
    <message>
        <source>Warning: You do not seem to have the base GStreamer plugins installed.
          All audio and video support has been disabled</source>
        <translation>警告：您可能没有安装 GStreamer 插件。          所有音效与影像支持将被关闭</translation>
    </message>
    <message>
        <source>Warning: You do not seem to have the package gstreamer0.10-plugins-good installed.
          Some video features have been disabled.</source>
        <translation>警告：您可能没有安装 gstreamer0.10-plugins-good。
          有些影像的功能将被关闭。</translation>
    </message>
</context>
<context>
    <name>QLocalServer</name>
    <message>
        <source>%1: Name error</source>
        <translation>%1：名称错误</translation>
    </message>
    <message>
        <source>%1: Unknown error %2</source>
        <translation>%1：未知的错误 %2</translation>
    </message>
    <message>
        <source>%1: Permission denied</source>
        <translation>%1：存取被拒</translation>
    </message>
    <message>
        <source>%1: Address in use</source>
        <translation>%1：地址使用中</translation>
    </message>
</context>
<context>
    <name>Phonon::VolumeSlider</name>
    <message>
        <source>Volume: %1%</source>
        <translation>音量：%1%</translation>
    </message>
    <message>
        <source>Use this slider to adjust the volume. The leftmost position is 0%, the rightmost is %1%</source>
        <translation>使用此滑动器来调整音量。最左边的位置为 0%，最右边的为 %1%</translation>
    </message>
</context>
<context>
    <name>Q3ToolBar</name>
    <message>
        <source>More...</source>
        <translation>更多...</translation>
    </message>
</context>
<context>
    <name>QMultiInputContextPlugin</name>
    <message>
        <source>Multiple input method switcher that uses the context menu of the text widgets</source>
        <translation>使用文本组件中的内文菜单的多重输入法切换器</translation>
    </message>
    <message>
        <source>Multiple input method switcher</source>
        <translation>多重输入法切换器</translation>
    </message>
</context>
<context>
    <name>Q3ProgressDialog</name>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>QProgressDialog</name>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>QFile</name>
    <message>
        <source>Cannot create %1 for output</source>
        <translation>无法建立 %1 以输出</translation>
    </message>
    <message>
        <source>Failure to write block</source>
        <translation>写入区块时失败</translation>
    </message>
    <message>
        <source>Cannot open %1 for input</source>
        <translation>无法开启 %1 以输入</translation>
    </message>
    <message>
        <source>Destination file exists</source>
        <translation>目标文件已存在</translation>
    </message>
    <message>
        <source>Cannot open for output</source>
        <translation>无法开启进行输出</translation>
    </message>
</context>
<context>
    <name>QTDSDriver</name>
    <message>
        <source>Unable to open connection</source>
        <translation>无法开启联机</translation>
    </message>
    <message>
        <source>Unable to use database</source>
        <translation>无法使用数据库</translation>
    </message>
</context>
<context>
    <name>AudioOutput</name>
    <message>
        <source>&lt;html&gt;The audio playback device &lt;b&gt;%1&lt;/b&gt; does not work.&lt;br/&gt;Falling back to &lt;b&gt;%2&lt;/b&gt;.&lt;/html&gt;</source>
        <translation>&lt;html&gt;音效播放装置 &lt;b&gt;%1&lt;/b&gt; 未能运作。&lt;br/&gt;改用默认装置 &lt;b&gt;%2&lt;/b&gt;。&lt;/html&gt;</translation>
    </message>
    <message>
        <source>Revert back to device &apos;%1&apos;</source>
        <translation>回复到装置 &apos;%1&apos;</translation>
    </message>
    <message>
        <source>&lt;html&gt;Switching to the audio playback device &lt;b&gt;%1&lt;/b&gt;&lt;br/&gt;which just became available and has higher preference.&lt;/html&gt;</source>
        <translation>&lt;html&gt;音效播放装置 &lt;b&gt;%1&lt;/b&gt; 已可使用，因为有较高优先权，因此将切换到该装置。&lt;/html&gt;</translation>
    </message>
</context>
<context>
    <name>QPluginLoader</name>
    <message>
        <source>The plugin was not loaded.</source>
        <translation>插件未载入。</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
</context>
<context>
    <name>QSlider</name>
    <message>
        <source>Page up</source>
        <translation>页面上方</translation>
    </message>
    <message>
        <source>Position</source>
        <translation>位置</translation>
    </message>
    <message>
        <source>Page right</source>
        <translation>页面右方</translation>
    </message>
    <message>
        <source>Page down</source>
        <translation>页面下方</translation>
    </message>
    <message>
        <source>Page left</source>
        <translation>页面左方</translation>
    </message>
</context>
<context>
    <name>CloseButton</name>
    <message>
        <source>Close Tab</source>
        <translation>关闭分页</translation>
    </message>
</context>
<context>
    <name>QPSQLResult</name>
    <message>
        <source>Unable to prepare statement</source>
        <translation>无法准备叙述</translation>
    </message>
    <message>
        <source>Unable to create query</source>
        <translation>无法建立查询</translation>
    </message>
</context>
<context>
    <name>QNetworkAccessFileBackend</name>
    <message>
        <source>Request for opening non-local file %1</source>
        <translation>要求开启非本地端文件 %1</translation>
    </message>
    <message>
        <source>Read error reading from %1: %2</source>
        <translation>从 %1 读取错误：%2</translation>
    </message>
    <message>
        <source>Cannot open %1: Path is a directory</source>
        <translation>无法开启 %1：此路径是一个目录</translation>
    </message>
    <message>
        <source>Error opening %1: %2</source>
        <translation>开启 %1 发生错误：%2</translation>
    </message>
    <message>
        <source>Write error writing to %1: %2</source>
        <translation>写入 %1 时发生错误：%2</translation>
    </message>
</context>
<context>
    <name>QNetworkReplyImpl</name>
    <message>
        <source>Operation canceled</source>
        <translation>取消操作</translation>
    </message>
</context>
<context>
    <name>Q3NetworkProtocol</name>
    <message>
        <source>Operation stopped by the user</source>
        <translation>用户已中止操作</translation>
    </message>
</context>
<context>
    <name>QMdiArea</name>
    <message>
        <source>(Untitled)</source>
        <translation>（未命名）</translation>
    </message>
</context>
<context>
    <name>QHostInfo</name>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
</context>
<context>
    <name>Q3Accel</name>
    <message>
        <source>%1, %2 not defined</source>
        <translation>%1，%2 未定义</translation>
    </message>
    <message>
        <source>Ambiguous %1 not handled</source>
        <translation>不明确的 %1 尚未处理</translation>
    </message>
</context>
<context>
    <name>QTcpServer</name>
    <message>
        <source>Operation on socket is not supported</source>
        <translation>Socket 的操作未被支持</translation>
    </message>
</context>
</TS>