Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

freeipmi failed parsing on sensor data #37

Open
ohadlevy opened this issue Nov 2, 2015 · 5 comments
Open

freeipmi failed parsing on sensor data #37

ohadlevy opened this issue Nov 2, 2015 · 5 comments

Comments

@ohadlevy
Copy link

ohadlevy commented Nov 2, 2015

when using:
/usr/sbin/ipmi-sensors --hostname=fox02 --driver-type=LAN_2_0 --no-header-output --output-sensor-state --entity-sensor-names --config-file=/tmp/20151102-15221-ce12l

the following is observed:

logs
4   | System Board 1 SEL Fullness     | Event Logging Disabled      | Nominal  | N/A        | N/A   | 'OK'
5   | System Board 1 12V Standby      | Voltage                     | Nominal  | 12.16      | V     | 'OK'
6   | System Board 1 5V Standby       | Voltage                     | Nominal  | 5.08       | V     | 'OK'
7   | System Board 1 5V               | Voltage                     | Nominal  | 5.03       | V     | 'OK'
8   | System Board 1 3.3V Standby     | Voltage                     | Nominal  | 3.43       | V     | 'OK'
9   | System Board 1 3.3V             | Voltage                     | Nominal  | 3.35       | V     | 'OK'
11  | System Board 1 MEZZ1 TEMP       | Temperature                 | Nominal  | 41.00      | C     | 'OK'
2   | Processor 2 P2 ThermalTrip      | Processor                   | N/A      | N/A        | N/A   | N/A
1   | Processor 1 P1 ThermalTrip      | Processor                   | N/A      | N/A        | N/A   | N/A
3   | Processor 1 CPU ERR2            | Processor                   | N/A      | N/A        | N/A   | N/A
12  | Processor 1 CPU1 Temp           | Temperature                 | Nominal  | 44.00      | C     | 'OK'
13  | Processor 1 CPU2 Temp           | Temperature                 | N/A      | N/A        | C     | N/A
14  | Processor 1 DIMM ZONE 1 Temp    | Temperature                 | Nominal  | 35.00      | C     | 'OK'
15  | Processor 1 DIMM ZONE 2 Temp    | Temperature                 | N/A      | N/A        | C     | N/A
18  | Processor 1 PCH Temp            | Temperature                 | Nominal  | 43.00      | C     | 'OK'
19  | System Board 2 Watchdog         | Watchdog 2                  | Nominal  | N/A        | N/A   | 'OK'
22  | Power Supply 1 AC lost          | Power Unit                  | N/A      | N/A        | N/A   | N/A
23  | Memory Module Memory            | Memory                      | N/A      | N/A        | N/A   | N/A
25  | Power Supply 2 Sys Pwr Monitor  | System ACPI Power State     | N/A      | N/A        | N/A   | N/A
26  | Battery Battery low             | Battery                     | Nominal  | N/A        | N/A   | 'OK'
29  | Processor 1 M2090 Temp 1        | Temperature                 | N/A      | N/A        | C     | N/A
30  | Processor 1 M2090 PWR 1         | Other Units Based Sensor    | N/A      | N/A        | W     | N/A
31  | Processor 1 M2090 Temp 2        | Temperature                 | N/A      | N/A        | C     | N/A
32  | Processor 1 M2090 PWR 2         | Other Units Based Sensor    | N/A      | N/A        | W     | N/A
35  | Power Supply 2 M2090 STATUS 1   | OEM Reserved                | N/A      | N/A        | N/A   | N/A
36  | Power Supply 2 M2090 STATUS 2   | OEM Reserved                | N/A      | N/A        | N/A   | N/A
38  | Add-in Card GPGPU Insert        | Add In Card                 | N/A      | N/A        | N/A   | N/A
39  | Processor 1 MIC Temp 1          | Temperature                 | N/A      | N/A        | C     | N/A
40  | Processor 1 MIC PWR 1           | Other Units Based Sensor    | N/A      | N/A        | W     | N/A
48  | Processor 1 MIC Temp 2          | Temperature                 | N/A      | N/A        | C     | N/A
16  | Processor 1 MIC PWR 2           | Other Units Based Sensor    | N/A      | N/A        | W     | N/A
45  | Power Supply 2 MIC STATUS 1     | OEM Reserved                | N/A      | N/A        | N/A   | N/A
46  | Power Supply 2 MIC STATUS 2     | OEM Reserved                | N/A      | N/A        | N/A   | N/A
42  | Chassis Specific NPDB Status    | Power Unit                  | N/A      | N/A        | N/A   | N/A
53  | Chassis Specific SC FW Status   | Management Subsystem Health | Nominal  | N/A        | N/A   | 'OK'
49  | Air Inlet Inlet Temp            | Temperature                 | Nominal  | 26.00      | C     | 'OK'
51  | Power Management Input Voltage  | Voltage                     | Nominal  | 11.97      | V     | 'OK'
52  | Power Management Input Current  | Current                     | Nominal  | 3.00       | A     | 'OK'
54  | Chassis Specific PSU 1 Status   | Power Supply                | Critical | N/A        | N/A   | 'Presence detected' 'Power Supply Failure detected' 'Power Supply input lost (AC/DC)'
96  | Fan 96 FAN_1                    | Fan                         | Nominal  | 6790.00    | RPM   | 'OK'
97  | Fan 97 FAN_2                    | Fan                         | Nominal  | 6790.00    | RPM   | 'OK'
98  | Fan 98 FAN_3                    | Fan                         | Nominal  | 6790.00    | RPM   | 'OK'
99  | Fan 99 FAN_4                    | Fan                         | Nominal  | 6860.00    | RPM   | 'OK'
112 | Chassis Specific PSU Mismatch   | Power Supply                | Nominal  | N/A        | N/A   | 'OK'
113 | Chassis Specific PSU Redundancy | Power Supply                | Nominal  | N/A        | N/A   | 'OK'

E, [2015-11-02T17:44:10.262389 #15221] ERROR -- : undefined method `gsub' for nil:NilClass
D, [2015-11-02T17:44:10.262490 #15221] DEBUG -- : /home/ohad/.rvm/gems/ruby-2.1.1/gems/rubyipmi-0.10.0/lib/rubyipmi/freeipmi/commands/sensors.rb:93:in `normalize'
/home/ohad/.rvm/gems/ruby-2.1.1/gems/rubyipmi-0.10.0/lib/rubyipmi/freeipmi/commands/sensors.rb:88:in `initialize'
/home/ohad/.rvm/gems/ruby-2.1.1/gems/rubyipmi-0.10.0/lib/rubyipmi/freeipmi/commands/sensors.rb:76:in `new'
/home/ohad/.rvm/gems/ruby-2.1.1/gems/rubyipmi-0.10.0/lib/rubyipmi/freeipmi/commands/sensors.rb:76:in `block in parse'
/home/ohad/.rvm/gems/ruby-2.1.1/gems/rubyipmi-0.10.0/lib/rubyipmi/freeipmi/commands/sensors.rb:74:in `each'
/home/ohad/.rvm/gems/ruby-2.1.1/gems/rubyipmi-0.10.0/lib/rubyipmi/freeipmi/commands/sensors.rb:74:in `parse'
/home/ohad/.rvm/gems/ruby-2.1.1/gems/rubyipmi-0.10.0/lib/rubyipmi/freeipmi/commands/sensors.rb:15:in `list'
/home/ohad/.rvm/gems/ruby-2.1.1/gems/rubyipmi-0.10.0/lib/rubyipmi/freeipmi/commands/sensors.rb:30:in `fanlist'

this is using dell PowerEdge C6220

@logicminds
Copy link
Owner

Ill take a look at the parser. I have heard others complain but your the first to provide output.

@ohadlevy
Copy link
Author

ohadlevy commented Nov 2, 2015

lucky me ;) thanks @logicminds

@logicminds
Copy link
Owner

What version of freeipmi are you using?

@logicminds
Copy link
Owner

So I am assuming the output you posted is from the result of the same command rubyipmi used. If it is this looks to be a vendor issue with sensor data. If you look at my fixtures, which is what I based the parser on the output is different and provides much more detail: https://github.com/logicminds/rubyipmi/blob/master/spec/fixtures/freeipmi/sensors.txt

Can you run the sensor command again without the flag (--no-header-output) so I can see what your system is returning and which headers are for which sensor?

@logicminds
Copy link
Owner

I created a new branch: https://github.com/logicminds/rubyipmi/tree/gh-37 and added some unit tests that parse the output you provided. The parser seems to work as is, but I am wondering if the output you provided is different than the output given by freeipmi somehow.

You can test this out on your system by checking out gh-37 branch and running bundle exec rspec spec/unit/freeipmi/sensors_spec.rb

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants