Updated: 2021-05-13
Status: CURRENT
- Protecting code integrity with PGP
- Table of contents
- Target audience
- Structure
- Basic PGP concepts and tools
- Generating and protecting your certification key
- Generating PGP subkeys
- Moving your certification key to offline storage
- Move the subkeys to a hardware device
- Using PGP with Git
- Checklist
- Considerations
- Protecting online accounts
- Further reading
This document is aimed at developers working on free software projects. It covers the following topics:
- PGP basics and best practices
- How to use PGP with Git
- How to protect your developer accounts
We use the term "Free" as in "Freedom," but this guide can also be used for any other kind of software that relies on contributions from a distributed team of developers. If you write code that goes into public source repositories, you can benefit from getting acquainted with and following this guide.
Each section is split into two areas:
- The checklist that can be adapted to your project's needs
- Free-form list of considerations that explain what dictated these decisions, together with configuration instructions
The items in each checklist include the priority level, which we hope will help guide your decision:
- (ESSENTIAL) items should definitely be high on the consideration list. If not implemented, they will introduce high risks to the code that gets committed to the open-source project.
- (NICE) to have items will improve the overall security, but will affect how you interact with your work environment, and probably require learning new habits or unlearning old ones.
Remember, these are only guidelines. If you feel these priority levels do not reflect your project's commitment to security, you should adjust them as you see fit.
- Understand the role of PGP in Free Software Development (ESSENTIAL)
- Understand the basics of Public Key Cryptography (ESSENTIAL)
- Understand PGP Encryption vs. Signatures (ESSENTIAL)
- Understand PGP key identities (ESSENTIAL)
- Understand PGP key validity (ESSENTIAL)
- Install GnuPG utilities (version 2.x) (ESSENTIAL)
The Free Software community has long relied on PGP for assuring the authenticity and integrity of software products it produced. You may not be aware of it, but whether you are a Linux, Mac or Windows user, you have previously relied on PGP to ensure the integrity of your computing environment:
- Linux distributions rely on PGP to ensure that binary or source packages have not been altered between when they have been produced and when they are installed by the end-user.
- Free Software projects usually provide detached PGP signatures to accompany released software archives, so that downstream projects can verify the integrity of downloaded releases before integrating them into their own distributed downloads.
- Free Software projects routinely rely on PGP signatures within the code itself in order to track provenance and verify integrity of code committed by project developers.
This is very similar to developer certificates/code signing mechanisms used by programmers working on proprietary platforms. In fact, the core concepts behind these two technologies are very much the same -- they differ mostly in the technical aspects of the implementation and the way they delegate trust. PGP does not rely on centralized Certification Authorities, but instead lets each user assign their own trust to each certificate.
Our goal is to get your project on board using PGP for code provenance and integrity tracking, following best practices and observing basic security precautions.
You do not need to know the exact details of how PGP works -- understanding the core concepts is enough to be able to use it successfully for our purposes. PGP relies on Public Key Cryptography to convert plain text into encrypted text. This process requires two distinct keys:
- A public key that is known to everyone
- A private key that is only known to the owner
For encryption, PGP uses the public key of the owner to create a message that is only decryptable using the owner's private key:
- the sender generates a random encryption key ("session key")
- the sender encrypts the contents using that session key (using a symmetric cipher)
- the sender encrypts the session key using the recipient's public PGP key
- the sender sends both the encrypted contents and the encrypted session key to the recipient
To decrypt:
- the recipient decrypts the session key using their private PGP key
- the recipient uses the session key to decrypt the contents of the message
For creating signatures, the private/public PGP keys are used the opposite way:
- the signer generates the checksum hash of the contents
- the signer uses their own private PGP key to encrypt that checksum
- the signer provides the encrypted checksum alongside the contents
To verify the signature:
- the verifier generates their own checksum hash of the contents
- the verifier uses the signer's public PGP key to decrypt the provided checksum
- if the checksums match, the integrity of the contents is verified
Frequently, encrypted messages are also signed with the sender's own PGP key. This should be the default whenever using encrypted messaging, as encryption without authentication is not very meaningful (unless you are a whistleblower or a secret agent and need plausible deniability).
Each PGP key must have one or multiple Identities associated with it. Usually, an "Identity" is the person's full name and email address in the following format:
Alice Engineer <[email protected]>
Sometimes it will also contain a comment in brackets, to tell the end-user more about that particular key:
Bob Designer (obsolete 1024-bit key) <[email protected]>
Since people can be associated with multiple professional and personal entities, they can have multiple identities on the same key:
Alice Engineer <[email protected]>
Alice Engineer <[email protected]>
Alice Engineer <[email protected]>
When multiple identities are used, one of them would be marked as the "primary identity" to make searching easier.
To be able to use someone else's public key for encryption or verification, you need to be sure that it actually belongs to the right person (Alice) and not to an impostor (Eve). In PGP, this certainty is called "key validity:"
- Validity: full -- means we are pretty sure this key belongs to Alice
- Validity: marginal -- means we are somewhat sure this key belongs to Alice
- Validity: unknown -- means there is no assurance at all that this key belongs to Alice
PGP incorporates a trust delegation mechanism known as the "Web of Trust." At its core, this is an attempt to replace the need for centralized Certification Authorities of the HTTPS/TLS world. Instead of various software makers dictating who should be your trusted certifying entity, PGP leaves this responsibility to each user.
Unfortunately, very few people understand how the Web of Trust works, and even fewer bother to keep it going. It remains an important aspect of the OpenPGP specification, but recent versions of GnuPG (2.2 and above) have implemented an alternative mechanism called "Trust on First Use" (TOFU).
You can think of TOFU as "the SSH-like approach to trust." With SSH, the first time you connect to a remote system, its key fingerprint is recorded and remembered. If the key changes in the future, the SSH client will alert you and refuse to connect, forcing you to make a decision on whether you choose to trust the changed key or not.
Similarly, the first time you import someone's PGP key, it is assumed to be trusted. If at any point in the future GnuPG comes across another key with the same identity, both the previously imported key and the new key will be marked as invalid and you will need to manually figure out which one to keep.
In this guide, we will be using the TOFU trust model.
First, it is important to understand the distinction between PGP, OpenPGP, GnuPG and gpg:
- PGP ("Pretty Good Privacy") is the name of the original commercial software
- OpenPGP is the IETF standard compatible with the original PGP tool
- GnuPG ("Gnu Privacy Guard") is free software that implements the OpenPGP standard
- The command-line tool for GnuPG is called "gpg"
Today, the term "PGP" is almost universally used to mean "the OpenPGP standard," not the original commercial software, and therefore "PGP" and "OpenPGP" are interchangeable. The terms "GnuPG" and "gpg" should only be used when referring to the tools, not to the output they produce or OpenPGP features they implement. For example:
- PGP (not GnuPG or GPG) key
- PGP (not GnuPG or GPG) signature
- PGP (not GnuPG or GPG) keyserver
Understanding this should protect you from an inevitable pedantic "actually" from other PGP users you come across.
If you are using Linux, you should already have GnuPG installed. On a Mac,
you should install GPG-Suite or you can use brew install gnupg2. On a Windows PC, you should install
GPG4Win, and you will probably need to adjust some
of the commands in the guide to work for you, unless you have a unix-like
environment set up. For all other platforms, you'll need to do your own
research to find the correct places to download and install GnuPG.
- Generate a 4096-bit RSA certification key (ESSENTIAL)
- Back up the certification key using paperkey (ESSENTIAL)
- Add all relevant identities (ESSENTIAL)
In this and next section we'll talk about the certification key and subkeys. The certification key is often called "the master key," but it is a poor analogy, as it doesn't act in any way like a physical master key (in the sense that it cannot decrypt content encrypted to any of the subkeys, as one example). For this reason, we'll stick to calling it the "certification key."
It is important to understand the following:
- There are no technical differences between the certify key and any of the subkeys
- At creation time, we assign functional limitations to each key by giving it specific capabilities.
- A PGP key can have 4 capabilities:
- [S] key can be used for signing
- [E] key can be used for encryption
- [A] key can be used for authentication
- [C] key can be used for certifying other keys
- A single key may have multiple capabilities.
The key carrying the [C] (certify) capability is used to indicate relationship with other PGP keys. Only the [C] key can be used to:
- add or revoke other keys (subkeys) with S/E/A capabilities
- add, change or revoke identities (uids) associated with the key
- add or change the expiration date on itself or any subkey
- sign other people's keys for the web of trust purposes
In the Free Software world, the [C] key is your digital identity. Once you create that key, you should take extra care to protect it and prevent it from falling into malicious hands.
Before you create your certify key you need to pick your primary identity and your passphrase.
Identities are strings using the same format as the "From" field in emails:
Alice Engineer <[email protected]>
You can create new identities, revoke old ones, and change which identity is your "primary" one at any time. Since the primary identity is shown in all GnuPG operations, you should pick a name and address that are both professional and the most likely ones to be used for PGP-protected communication, such as your work address or the address you use for signing off on project commits.
The passphrase is used exclusively for encrypting the private key with a
symmetric algorithm while it is stored on disk. If the contents of your
.gnupg directory ever get leaked, a good passphrase is the last line of
defense between the thief and them being able to impersonate you online, which
is why it is important to set up a good passphrase.
A good guideline for a strong passphrase is 3-4 words from a rich or mixed dictionary that are not quotes from popular sources (songs, books, slogans). You'll be using this passphrase fairly frequently, so it should be both easy to type and easy to remember.
GnuPG supports many algorithms, but we will only consider the below two:
- RSA for the certification key
- ECC (Elliptic Curve) for all other subkeys
We use RSA for the certification key mainly for compatibility reasons -- there is probably still some tooling that does not properly handle ECC keys, so sticking with RSA for the certification key makes sense. We will use it only very occasionally, so the slowness/size considerations are unimportant.
All of the day-to-day work will be done using subkeys, so picking ECC makes perfect sense there -- it will be faster and the resulting signatures will be dramatically smaller.
To generate your new certification key, issue the following command, putting in the right values instead of "Alice Engineer:"
$ gpg --quick-generate-key 'Alice Engineer <[email protected]>' rsa4096 cert
A dialog will pop up asking to enter the passphrase. Then, you may need to move your mouse around or type on some keys to generate enough entropy until the command completes.
Review the output of the command, it will be something like this:
pub rsa4096 2021-05-01 [C] [expires: 2023-05-01]
111122223333444455556666AAAABBBBCCCCDDDD
uid Alice Engineer <[email protected]>
Note the long string on the 2nd line -- that is the full fingerprint of your newly generated key. Key IDs can be represented in three different forms:
- fingerprint, a full 40-character key identifier
- long, last 16-characters of the fingerprint (
AAAABBBBCCCCDDDD) - short, last 8 characters of the fingerprint (
CCCCDDDD)
You should avoid using 8-character "short key IDs" as they are not sufficiently unique.
At this point, I suggest you open a text editor, copy the fingerprint of your new key and paste it there. You'll need to use it for the next few steps, so having it close by will be handy.
For disaster recovery purposes -- and especially if you intend to use the Web of Trust and collect key signatures from other project developers -- you should create a hardcopy backup of your private key. This is supposed to be the "last resort" measure in case all other backup mechanisms have failed.
The best way to create a printable hardcopy of your private key is using the
paperkey software written for this very purpose. Paperkey is available on
all Linux distros, as well as installable via brew install paperkey on Macs.
Run the following command, replacing [fpr] with the full fingerprint of your
key:
$ gpg --export-secret-key [fpr] | paperkey -o /tmp/key-backup.txt
The output will be in a format that is easy to OCR or input by hand, should you ever need to recover it. Print out that file, then take a pen and write the key passphrase on the margin of the paper. This is a required step because the key printout is still encrypted with the passphrase, and if you ever change the passphrase on your key, you will not remember what it used to be when you had first created it -- guaranteed.
Put the resulting printout and the hand-written passphrase into an envelope and store in a secure and well-protected place, preferably away from your home, such as your bank vault.
NOTE ON PRINTERS: Long gone are days when printers were dumb devices connected to your computer's parallel port. These days they have full operating systems, hard drives, and cloud integration. Since the key content we send to the printer will be encrypted with the passphrase, this is a fairly safe operation, but use your best paranoid judgement.
If you have multiple relevant email addresses (personal, work, open-source project, etc), you should add them to your key. You don't need to do this for any addresses that you don't expect to use with PGP (e.g. probably not your school alumni address).
The command is (put the full key fingerprint instead of [fpr]):
$ gpg --quick-add-uid [fpr] 'Alice Engineer <[email protected]>'
You can review the UIDs you've already added using:
$ gpg --list-key [fpr] | grep ^uid
GnuPG will make the latest UID you add as your primary UID, so if that is different from what you want, you should fix it back:
$ gpg --quick-set-primary-uid [fpr] 'Alice Engineer <[email protected]>'
- Generate the Encryption subkey (ESSENTIAL)
- Generate the Signing subkey (ESSENTIAL)
- Generate the Authentication subkey (NICE)
- Upload your public keys to a PGP keyserver (NICE)
- Set up a refresh cronjob (NICE)
Now that we've created the certification key, let's create the keys you'll actually be using for day-to-day work. Before we do this, we need to pick the ECC algorithm flavor.
We won't go into the reasons behind why ECC is split into two camps. All you need to know is that many people consider ed25519 "more pure" due to the way its underlying curve primitives were selected and NIST "less pure" because that selection process was not as public or thorough.
Do you plan to use a hardware device like a Yubikey for storing your subkeys? Then pick NIST (use "nistp256" instead of "cv25519" and "ed25519" below). If you just plan to store your subkeys on your computer, then pick ED25519 (the GnuPG default).
Since you can revoke subkeys and create new ones at any time, this is not a life or death kind of decision. If in doubt, pick ed25519.
To create the subkeys, run:
$ gpg --quick-add-key [fpr] cv25519 encr
$ gpg --quick-add-key [fpr] ed25519 sign
You can also create the Authentication key, which will allow you to use your PGP key for ssh purposes:
$ gpg --quick-add-key [fpr] ed25519 auth
You can review your key information using gpg --list-key [fpr]:
pub rsa4096 2021-05-01 [C] [expires: 2023-05-01]
111122223333444455556666AAAABBBBCCCCDDDD
uid [ultimate] Alice Engineer <[email protected]>
uid [ultimate] Alice Engineer <[email protected]>
sub cv25519 2021-05-01 [E]
sub ed25519 2021-05-01 [S]
If you use GitHub in your development, you should upload your key following the instructions they have provided:
To generate the public key output suitable to paste in, just run:
$ gpg --export --armor [fpr]
To make it easier for others to find your public key, you can upload it to the keys.openpgp.org keyserver. Please follow the instructions provided here:
- Prepare encrypted detachable storage (ESSENTIAL)
- Back up your GnuPG directory (ESSENTIAL)
- Remove the certification key from your home directory (NICE)
- Remove the revocation certificate from your home directory (NICE)
Why would you want to remove your certification ([C]) key from your home directory? This is generally done to prevent it from being stolen or accidentally leaked. Private keys are tasty targets for malicious actors -- we know this from several successful malware attacks that scanned users' home directories and uploaded any private key content found there.
It would be very damaging for any developer to have their PGP keys stolen -- in the Free Software world this is basically equal to identity theft. Removing private keys from your home directory helps protect you from such events.
!!!Do not skip this step!!!
It is important to have a readily available backup of your PGP keys should you
need to recover them (this is different from the disaster-level preparedness
we did with paperkey).
Start by getting a small USB "thumb" drive (preferably two!) that you will use for backup purposes. You will first need to encrypt them:
For the encryption passphrase, you can use the same one as on your private key.
Once the encryption process is over, re-insert the USB drive and make sure it
gets properly mounted. Find out the full mount point of the device, for
example by running the mount command (under Linux, external media usually
gets mounted under /media/disk, under Mac it's /Volumes).
Once you know the full mount path, copy your entire GnuPG directory there:
$ cp -rp ~/.gnupg [/media/disk/name]/gnupg-backup
(Note: If you get any Operation not supported on socket errors, those are
benign and you can ignore them.)
You should now test to make sure everything still works:
$ gpg --homedir=[/media/disk/name]/gnupg-backup --list-key [fpr]
If you don't get any errors, then you should be good to go. Unmount the USB drive, distinctly label it so you don't blow it away next time you need to use a random USB drive, and put in a safe place -- but not too far away, because you'll need to use it every now and again for things like editing identities, adding or revoking subkeys, or signing other people's keys.
The files in our home directory are not as well protected as we like to think. They can be leaked or stolen via many different means:
- by accident when making quick homedir copies to set up a new workstation
- by systems administrator negligence or malice
- via poorly secured backups
- via malware in desktop apps (browsers, pdf viewers, etc)
- via coercion when crossing international borders
Protecting your key with a good passphrase greatly helps reduce the risk of any of the above, but passphrases can be discovered via keyloggers, shoulder-surfing, or any number of other means. For this reason, the recommended setup is to remove your certification key from your home directory and store it on offline storage.
Please see the previous section and make sure you have backed up your GnuPG directory in its entirety. What we are about to do will render your key useless if you do not have a usable backup!
First, identify the "keygrip" of your certification key:
$ gpg --with-keygrip --list-key [fpr]
The output will be something like this:
pub rsa4096 2021-05-01 [C] [expires: 2023-05-01]
111122223333444455556666AAAABBBBCCCCDDDD
Keygrip = AAAA999988887777666655554444333322221111
uid [ultimate] Alice Engineer <[email protected]>
uid [ultimate] Alice Engineer <[email protected]>
sub cv25519 2021-05-01 [E]
Keygrip = BBBB999988887777666655554444333322221111
sub ed25519 2021-05-01 [S]
Keygrip = CCCC999988887777666655554444333322221111
Find the keygrip entry that is beneath the pub line (right under the public
key fingerprint). This will correspond directly to a file in your home
.gnupg directory:
$ cd ~/.gnupg/private-keys-v1.d
$ ls
AAAA999988887777666655554444333322221111.key
BBBB999988887777666655554444333322221111.key
CCCC999988887777666655554444333322221111.key
All you have to do is simply remove the .key file that corresponds to the
certification keygrip:
$ cd ~/.gnupg/private-keys-v1.d
$ rm AAAA999988887777666655554444333322221111.key
Now, if you issue the --list-secret-keys command, it will show that the
[C] key is not present (indicated by the # character):
$ gpg --list-secret-keys
sec# rsa4096 2021-05-01 [C] [expires: 2023-05-01]
111122223333444455556666AAAABBBBCCCCDDDD
uid [ultimate] Alice Engineer <[email protected]>
uid [ultimate] Alice Engineer <[email protected]>
ssb cv25519 2021-05-01 [E]
ssb ed25519 2021-05-01 [S]
Another file you should remove (but keep in backups) is the revocation certificate that was automatically created with your certification key. A revocation certificate allows someone to permanently mark your key as revoked, meaning it can no longer be used or trusted for any purpose. You would normally use it to revoke a key that, for some reason, you can no longer control -- for example, if you had lost the key passphrase.
Just as with the certification key, if a revocation certificate leaks into malicious hands, it can be used to destroy your developer digital identity, so it's better to remove it from your home directory.
cd ~/.gnupg/openpgp-revocs.d
rm [fpr].rev
- Get a GnuPG-compatible hardware device (NICE)
- Configure the device to work with GnuPG (NICE)
- Set the user and admin PINs (NICE)
- Move your subkeys to the device (NICE)
Even though the certification key is now safe from being leaked or stolen, the subkeys are still in your home directory. Anyone who manages to get their hands on those will be able to decrypt your communication or fake your signatures (if they know the passphrase). Furthermore, each time a GnuPG operation is performed, the keys are loaded into system memory and can be stolen from there by sufficiently advanced malware (think Meltdown and Spectre).
The best way to completely protect your keys is to move them to a specialized hardware device that is capable of smartcard operations.
A smartcard contains a cryptographic chip that is capable of storing private keys and performing crypto operations directly on the card itself. Because the key contents never leave the smartcard, the operating system of the computer into which you plug in the hardware device is not able to retrieve the private keys themselves. This is very different from the encrypted USB storage device we used earlier for backup purposes -- while that USB device is plugged in and decrypted, the operating system is still able to access the private key contents. Using external encrypted USB media is not a substitute to having a smartcard-capable device.
Some other benefits of smartcards:
- they are relatively cheap and easy to obtain
- they are small and easy to carry with you
- they can be used with multiple devices
- many of them are tamper-resistant (depends on manufacturer)
Smartcards started out embedded into actual wallet-sized cards, which earned them their name. You can still buy and use GnuPG-capable smartcards, and they remain one of the cheapest available devices you can get. However, actual smartcards have one important downside: they require a smartcard reader, and very few laptops come with one.
For this reason, manufacturers have started providing small USB devices, the size of a USB thumb drive or smaller, that either have the microsim-sized smartcard pre-inserted, or that simply implement the smartcard protocol features on the internal chip. Here are a few recommendations:
- Nitrokey Start: Open hardware and Free Software: one of the cheapest options for GnuPG use, but with fewest extra security features.
- Nitrokey Pro: Similar to the Nitrokey Start, but is tamper-resistant and offers more security features (but not U2F, see the Fido U2F section of the guide); only supports NIST ECC cryptography.
- Yubikey: Proprietary hardware and software, but cheaper than Nitrokey Pro and comes available in the USB-C form that is more useful with newer laptops; also offers additional security features such as U2F; only supports NIST ECC cryptography.
If you want to use ED25519 subkeys, then your only choice is a Nitrokey Start, though once Nitrokey 3 Pro is available, it should also be considered.
Your smartcard device should Just Work (TM) the moment you plug it into any modern Linux or Mac workstation. You can verify it by running:
$ gpg --card-status
If you didn't get an error, but a full listing of the card details, then you are good to go. Unfortunately, troubleshooting all possible reasons why things may not be working for you is way beyond the scope of this guide. If you are having trouble getting the card to work with GnuPG, please seek support via your operating system's usual support channels.
Note, that despite having the name "PIN" (and implying that it must be a "number"), neither the user PIN nor the admin PIN on the card need to be numbers.
Your device will probably have default user and admin PINs set up when it
arrives. For Yubikeys, these are 123456 and 12345678 respectively. If
those don't work for you, please check any accompanying documentation
that came with your device.
To configure your smartcard, you will need to use the GnuPG menu system, as there are no convenient command-line switches:
$ gpg --card-edit
[...omitted...]
gpg/card> admin
Admin commands are allowed
gpg/card> passwd
You should set the user PIN (1) and Admin PIN (3). Please make sure to record and store these in a safe place -- especially the Admin PIN. You so rarely need to use the Admin PIN, that you will inevitably forget what it is if you do not record it.
Getting back to the main card menu, you can also set other values (such as name, sex, login data, etc), but it's not necessary and will additionally leak information about your smartcard should you lose it.
Exit the card menu (using "q") and save all changes. Next, let's move your
subkeys onto the smartcard. You will need both your PGP key passphrase and the
admin PIN of the card for most operations. Remember, that [fpr] stands for
the full 40-character fingerprint of your key.
$ gpg --edit-key [fpr]
Secret subkeys are available.
pub rsa4096/AAAABBBBCCCCDDDD
created: 2021-05-01 expires: 2023-05-01 usage: C
trust: ultimate validity: ultimate
ssb cv25519/1111222233334444
created: 2021-05-01 expires: never usage: E
ssb ed25519/5555666677778888
created: 2021-05-01 expires: never usage: S
[ultimate] (1). Alice Engineer <[email protected]>
[ultimate] (2) Alice Engineer <[email protected]>
gpg>
Using --edit-key puts us into the menu mode again, and you will notice that
the key listing is a little different. From here on, all commands are done
from inside this menu mode, as indicated by gpg>.
First, let's select the key we'll be putting onto the card -- you do this by
typing key 1 (it's the first one in the listing, our [E] subkey):
gpg> key 1
The output should be subtly different:
pub rsa4096/AAAABBBBCCCCDDDD
created: 2021-05-01 expires: 2023-05-01 usage: C
trust: ultimate validity: ultimate
ssb* cv25519/1111222233334444
created: 2021-05-01 expires: never usage: E
ssb ed25519/5555666677778888
created: 2021-05-01 expires: never usage: S
[ultimate] (1). Alice Engineer <[email protected]>
[ultimate] (2) Alice Engineer <[email protected]>
Notice the * that is next to the ssb line corresponding to the key -- it
indicates that the key is currently "selected." It works as a toggle, meaning
that if you type key 1 again, the * will disappear and the key will not be
selected any more.
Now, let's move that key onto the smartcard:
gpg> keytocard
Please select where to store the key:
(2) Encryption key
Your selection? 2
Since it's our [E] key, it makes sense to put it into the Encryption slot. When you submit your selection, you will be prompted first for your PGP key passphrase, and then for the admin PIN. If the command returns without an error, your key has been moved.
Important: Now type key 1 again to unselect the first key, and key 2
to select the [S] key:
gpg> key 1
gpg> key 2
gpg> keytocard
Please select where to store the key:
(1) Signature key
(3) Authentication key
Your selection? 1
You can use the [S] key both for Signature and Authentication, but we want to make sure it's in the Signature slot, so choose (1). Once again, if your command returns without an error, then the operation was successful.
Finally, if you created an [A] key, you can move it to the card as well,
making sure first to unselect key 2. Once you're done, choose "q":
gpg> q
Save changes? (y/N) y
Saving the changes will delete the keys you moved to the card from your home directory (but it's okay, because we have them in our backups should we need to do this again for a replacement smartcard).
If you perform --list-secret-keys now, you will see a subtle difference in
the output:
$ gpg --list-secret-keys
sec# rsa4096 2021-05-01 [C] [expires: 2023-05-01]
111122223333444455556666AAAABBBBCCCCDDDD
uid [ultimate] Alice Engineer <[email protected]>
uid [ultimate] Alice Engineer <[email protected]>
ssb> cv25519 2021-05-01 [E]
ssb> ed25519 2021-05-01 [S]
The > in the ssb> output indicates that the subkey is only available on
the smartcard. If you go back into your secret keys directory and look at the
contents there, you will notice that the .key files there have been replaced
with stubs:
$ cd ~/.gnupg/private-keys-v1.d
$ strings *.key
The output should contain shadowed-private-key to indicate that these files
are only stubs and the actual content is on the smartcard.
To verify that the smartcard is working as intended, you can create a signature:
$ echo "Hello world" | gpg --clearsign > /tmp/test.asc
$ gpg --verify /tmp/test.asc
This should ask for your smartcard PIN on your first command, and then show
"Good signature" after you run gpg --verify.
Congratulations, you have successfully made it extremely difficult to steal your digital developer identity!
Here is a quick reference for some common operations you'll need to do with your PGP key.
In all of the below commands, the [fpr] is your key fingerprint.
You will need your certification key for any of the operations below, so you
will first need to mount your backup offline storage and tell GnuPG to use it.
First, find out where the media got mounted, e.g. by looking at the output of
the mount command. Then, locate the directory with the backup of your GnuPG
directory and tell GnuPG to use that as its home:
$ export GNUPGHOME=/media/disk/name/gnupg-backup
$ gpg --list-secret-keys
You want to make sure that you see sec and not sec# in the output (the #
means the key is not available and you're still using your regular home
directory location).
After you make any changes to your key using the offline storage, you will want to import these changes back into your regular working directory:
$ gpg --export | gpg --homedir ~/.gnupg --import
$ unset GNUPGHOME
The certification key we created has the default expiration date of 2 years from the date of creation. This is done both for security reasons and to make obsolete keys eventually disappear from keyservers.
To extend the expiration on your key by a year from current date, just run:
$ gpg --quick-set-expire [fpr] 1y
You can also use a specific date if that is easier to remember (e.g. your birthday, January 1st, or Canada Day, 2030):
$ gpg --quick-set-expire [fpr] 2030-07-01
Remember to send the updated key back to keyservers:
$ gpg --send-key [fpr]
If you need to revoke an identity (e.g. you changed employers and your old email address is no longer valid), you can use a one-liner:
$ gpg --quick-revoke-uid [fpr] 'Alice Engineer <[email protected]>'
You can also do the same with the menu mode using gpg --edit-key [fpr].
Once you are done, remember to send the updated key back to keyservers:
$ gpg --send-key [fpr]
One of the core features of Git is its decentralized nature -- once a repository is cloned to your system, you have full history of the project, including all of its tags, commits and branches. However, with hundreds of cloned repositories floating around, how does anyone verify that the repository you downloaded has not been tampered with by a malicious third party? You may have cloned it from GitHub or some other official-looking location, but what if someone had managed to trick you?
Or what happens if a backdoor is discovered in one of the projects you've worked on, and the "Author" line in the commit says it was done by you, while you're pretty sure you had nothing to do with it?
To address both of these issues, Git introduced PGP integration. Signed tags prove the repository integrity by assuring that its contents are exactly the same as on the workstation of the developer who created the tag, while signed commits make it nearly impossible for someone to impersonate you without having access to your PGP keys.
- Understand signed tags, commits (ESSENTIAL)
- Configure git to use your key (ESSENTIAL)
- Learn how tag signing and verification works (ESSENTIAL)
- Configure git to always sign annotated tags (NICE)
- Learn how commit signing and verification works (ESSENTIAL)
- Configure git to always sign commits (NICE)
- Configure gpg-agent options (ESSENTIAL)
Git implements multiple levels of integration with PGP, first starting with signed tags, and then introducing signed commits.
Git is a complicated beast, but you need to know what a "hash" is in order to have a good grasp on how PGP integrates with it. We'll narrow it down to two kinds of hashes: tree hashes and commit hashes.
Every time you commit a change to a repository, git records checksum hashes of all objects in it -- contents (blobs), directories (trees), file names and permissions, etc, for each subdirectory in the repository. It only does this for trees and blobs that have changed with each commit, so as not to re-checksum the entire tree unnecessarily if only a small part of it was touched.
Then it calculates and stores the checksum of the toplevel tree, which will inevitably be different if any part of the repository has changed.
Once the tree hash has been created, git will calculate the commit hash, which will include the following information about the repository and the change being made:
- the checksum hash of the tree
- the checksum hash of the tree before the change (parent)
- information about the author (name, email, time of authorship)
- information about the committer (name, email, time of commit)
- the commit message
At the time of writing, git still uses the SHA1 hashing mechanism to calculate checksums, though work is under way to transition to a stronger algorithm that is more resistant to collisions. Note, that git already includes collision avoidance routines, so it is believed that a successful collision attack against git remains impractical.
Git tags allow developers to mark specific commits in the history of each git repository. Tags can be "lightweight" -- more or less just a pointer at a specific commit, or they can be "annotated," which becomes its own object in the git tree. An annotated tag object contains all of the following information:
- the checksum hash of the commit being tagged
- the tag name
- information about the tagger (name, email, time of tagging)
- the tag message
A PGP-signed tag is simply an annotated tag with all these entries wrapped around in a PGP signature. When a developer signs their git tag, they effectively assure you of the following:
- who they are (and why you should trust them)
- what the state of their repository was at the time of signing:
- the tag includes the hash of the commit
- the commit hash includes the hash of the toplevel tree
- which includes hashes of all files, contents, and subtrees
- it also includes all information about authorship
- including exact times when changes were made
- the commit hash includes the hash of the toplevel tree
- the tag includes the hash of the commit
When you clone a git repository and verify a signed tag, that gives you cryptographic assurance that all contents in the repository, including all of its history, are exactly the same as the contents of the repository on the developer's computer at the time of signing.
Signed commits are very similar to signed tags -- the contents of the commit object are PGP-signed instead of the contents of the tag object. A commit signature also gives you full verifiable information about the state of the developer's tree at the time the signature was made. Tag signatures and commit PGP signatures provide exact same security assurances about the repository and its entire history.
If you only have one secret key in your keyring, then you don't really need to do anything extra, as it becomes your default key.
However, if you happen to have multiple secret keys, you can tell git which
key should be used ([fpr] is the fingerprint of your key):
$ git config --global user.signingKey [fpr]
To create a signed tag, simply pass the -s switch to the tag command:
$ git tag -s [tagname]
Our recommendation is to always sign git tags, as this allows other developers to ensure that the git repository they are working with has not been maliciously altered (e.g. in order to introduce backdoors).
To verify a signed tag, simply use the verify-tag command:
$ git verify-tag [tagname]
If you are verifying someone else's git tag, then you will need to import their PGP key. Please refer to the "Trusted Team communication" document in the same repository for guidance on this topic.
If you are pulling a tag from another fork of the project repository, git should automatically verify the signature at the tip you're pulling and show you the results during the merge operation:
$ git pull [url] tags/sometag
The merge message will contain something like this:
Merge tag 'sometag' of [url]
[Tag message]
# gpg: Signature made [...]
# gpg: Good signature from [...]
Chances are, if you're creating an annotated tag, you'll want to sign it. To force git to always sign annotated tags, you can set a global configuration option:
$ git config --global tag.forceSignAnnotated true
Alternatively, you can just train your muscle memory to always pass the -s
switch:
$ git tag -asm "Tag message" tagname
It is easy to create signed commits, but it is much more difficult to incorporate them into your workflow. Many projects use signed commits as a sort of "Committed-by:" line equivalent that records code provenance -- the signatures are rarely verified by others except when tracking down project history. In a sense, signed commits are used for "tamper evidence," and not to "tamper-proof" the git workflow.
To create a signed commit, you just need to pass the -S flag to the git commit command (it's capital -S due to collision with another flag):
$ git commit -S
Our recommendation is to always sign commits and to require them of all project members, regardless of whether anyone is verifying them (that can always come at a later time).
To verify a single commit you can use verify-commit:
$ git verify-commit [hash]
You can also look at repository logs and request that all commit signatures are verified and shown:
$ git log --pretty=short --show-signature
If all members of your project sign their commits, you can enforce signature
checking at merge time (and then sign the resulting merge commit itself using
the -S flag):
$ git merge --verify-signatures -S merged-branch
Note, that the merge will fail if there is even one commit that is not signed or does not pass verification. As it is often the case, technology is the easy part -- the human side of the equation is what makes adopting strict commit signing for your project difficult.
If your project uses a mailing list for submitting and processing patches, then there is little use in signing commits, because all signature information will be lost when sent through that medium. It is still useful to sign your commits, just so others can refer to your publicly hosted git trees for reference, but the upstream project receiving your patches will not be able to verify them directly with git.
You can still sign the emails containing the patches, though.
You can tell git to always sign commits:
git config --global commit.gpgSign true
Or you can train your muscle memory to always pass the -S flag to all git commit operations (this includes --amend).
The GnuPG agent is a helper tool that will start automatically whenever you
use the gpg command and run in the background with the purpose of caching
the private key passphrase. This way you only have to unlock your key once to
use it repeatedly (very handy if you need to sign a bunch of git operations in
an automated script without having to continuously retype your passphrase).
There are two options you should know in order to tweak when the passphrase should be expired from cache:
default-cache-ttl(seconds): If you use the same key again before the time-to-live expires, the countdown will reset for another period. The default is 600 (10 minutes).max-cache-ttl(seconds): Regardless of how recently you've used the key since initial passphrase entry, if the maximum time-to-live countdown expires, you'll have to enter the passphrase again. The default is 30 minutes.
If you find either of these defaults too short (or too long), you can edit
your ~/.gnupg/gpg-agent.conf file to set your own values:
# set to 30 minutes for regular ttl, and 2 hours for max ttl
default-cache-ttl 1800
max-cache-ttl 7200
If you've created an [A] (Authentication) key and moved it to the smartcard, you can use it with ssh for adding 2-factor authentication for your ssh sessions. You just need to tell your environment to use the correct socket file for talking to the agent.
All you need is add this to your .bashrc:
export SSH_AUTH_SOCK=$(gpgconf --list-dirs agent-ssh-socket)
Then start a new login session for the changes to take effect:
$ bash
$ ssh-add -L
The last command should list the SSH representation of your PGP Auth key (the
comment should say cardno:XXXXXXXX at the end to indicate it's coming from
the smartcard).
To enable key-based logins with ssh, just add the ssh-add -L output to
~/.ssh/authorized_keys on remote systems you log in to. Congratulations,
you've just made your ssh credentials extremely difficult to steal.
As a bonus, you can get other people's PGP-based ssh keys from public keyservers, should you need to grant them ssh access to anything:
$ gpg --export-ssh-key [keyid]
This can come in super handy if you need to allow developers access to git repositories over ssh.
- Get a U2F-capable device (ESSENTIAL)
- Enable 2-factor authentication for your online accounts (ESSENTIAL)
- GitHub/GitLab
- Social Media
- Use U2F as primary mechanism, with TOTP as fallback (ESSENTIAL)
You may have noticed how a lot of your online developer identity is tied to your email address. If someone can gain access to your mailbox, they would be able to do a lot of damage to you personally, and to your reputation as a free software developer. Protecting your email accounts is just as important as protecting your PGP keys.
Two-factor authentication is a mechanism to improve account security by requiring a physical token in addition to a username and password. The goal is to make sure that even if someone steals your password (via keylogging, shoulder surfing, or other means), they still wouldn't be able to gain access to your account without having in their possession a specific physical device ("something you have" factor).
The most widely known mechanisms for 2-factor authentication are:
- SMS-based verification
- Time-based One-Time Passwords (TOTP) via a smartphone app, such as the "Google Authenticator" or similar solutions
- Hardware tokens supporting Fido U2F
SMS-based verification is easiest to configure, but has the following important downsides: it is useless in areas without signal (e.g. most building basements), and can be defeated if the attacker is able to intercept or divert SMS messages, for example by cloning your SIM card.
TOTP-based multi-factor authentication offers more protection than SMS, but has important scaling downsides (there are only so many tokens you can add to your smartphone app before finding the correct one becomes unwieldy). Plus, there's no avoiding the fact that your secret key ends up stored on the smartphone itself -- which is a complex, globally connected device that may or may not have been receiving timely security patches from the manufacturer.
Most importantly, neither TOTP nor SMS methods protect you from phishing attacks -- if the phisher is able to steal both your account password and the 2-factor token, they can replay them on the legitimate site and gain access to your account.
Fido U2F is a standard developed specifically to provide a mechanism for 2-factor authentication and to combat credential phishing. The U2F protocol will store each site's unique key on the USB token and will prevent you from accidentally giving the attacker both your password and your one-time token if you try to use it on anything other than the legitimate website.
Both Chrome and Firefox support U2F 2-factor authentication, and hopefully other browsers will soon follow.
There are many options available for hardware tokens with Fido U2F support, but if you're already ordering a smartcard-capable physical device, then your best option is a Yubikey 4, which supports both.
You definitely want to enable this option on the email provider you are using (especially if it is Google, which has excellent support for U2F). Other sites where this functionality should be enabled are:
- GitHub: it probably occurred to you when you uploaded your PGP public key that if anyone else is able to gain access to your account, they can replace your key with their own. If you publish code on GitHub, you should take care of your account security by protecting it with U2F-backed authentication.
- GitLab: for the same reasons as above.
- Google: if you have a google account, you will be surprised how many sites allow logging in with Google authentication instead of site-specific credentials.
- Facebook: same as above, a lot of online sites offer the option to authenticate using a Facebook account. You should 2-factor protect your Facebook account even if you do not use it.
- Other sites, as you deem necessary. See dongleauth.info for inspiration.
Many sites will allow you to configure multiple 2-factor mechanisms, and the recommended setup is:
- U2F token as the primary mechanism
- TOTP phone app as the secondary mechanism
This way, even if you lose your U2F token, you should be able to re-gain access to your account. Alternatively, you can enroll multiple U2F tokens (e.g. you can get another cheap token that only does U2F and use it for backup reasons).
By this point you have accomplished the following important tasks:
- Created your developer identity and protected it using PGP cryptography.
- Configured your environment so your identity is not easily stolen by moving your certification key offline and your subkeys to an external hardware device.
- Configured your git environment to ensure that anyone using your project is able to verify the integrity of the repository and its entire history.
- Secured your online accounts using 2-factor authentication.
You are already in a good place, but you should also read up on the following topics:
- How to secure your team communication (see the document in this repository). Decisions regarding your project development and governance require just as much careful protection as any committed code, if not so. Make sure that your team communication is trusted and the integrity of all decisions is verified.
- How to secure your workstation (see the document in this repository). Your goal is to minimize risky behaviour that would cause your project code to be contaminated, or your developer identity to be stolen.
- How to write secure code (see various documentation related to the programming languages and libraries used by your project). Bad, insecure code is still bad, insecure code even if there is a PGP signature on the commit that introduced it.