Wipy-LoPy-MicroPython driver for WS2812, WS2812B, and compatible RGB LEDs. These are popular RGB LEDs used for example in AdaFruit NeoPixels rings, strips, boards, etc.
Driver has been tested with up to 16 LEDs (for now) but it should work with much more LEDs.
Copy ws2812.py file to your pyboard.
from ws2812 import WS2812
chain = WS2812( ledNumber=4, dataPin='P22' )
data = [
(255, 0, 0), # red
(0, 255, 0), # green
(0, 0, 255), # blue
(85, 85, 85), # white
]
chain.show(data)
WS2812 driver is using SPI bus. Connect your LED's input wire to the SPI bus 0, MOSI is
- WiPy: pin GP16
- LoPy: pin P22 by default (G9 on extension board)
Connect LED's power and ground wires to VIN and GND. The same applies for LED rings, stripes, etc. (they have always one input wire).
USB may be insufficient for powering lots of RGB LEDs. You may need to use additional power source.
You can check more about the MicroPython project here: http://micropython.org
Discussion about this driver: http://forum.micropython.org/viewtopic.php?f=5&t=394
- 1.1 - Add support for LoPy
- 1.0 - First release.
Based on : https://github.com/JanBednarik/micropython-ws2812